In the situation of a client connecting to an FTP server using an IPv6
tunnel proxy, the connection info will indicate that the connection is
IPv6. However, because the server behing the proxy is IPv4, it is
permissable to attempt PSV mode. In the case of the FTP server being
IPv4 only, EPSV will always fail, and with the current logic curl will
be unable to connect to the server, as the IPv6 fwdproxy causes curl to
think that EPSV is impossible.
Closes#2432
Refuse to operate when given path components featuring byte values lower
than 32.
Previously, inserting a %00 sequence early in the directory part when
using the 'singlecwd' ftp method could make curl write a zero byte
outside of the allocated buffer.
Test case 340 verifies.
CVE-2018-1000120
Reported-by: Duy Phan Thanh
Bug: https://curl.haxx.se/docs/adv_2018-9cd6.html
returning 'time_t' is problematic when that type is unsigned and we
return values less than zero to signal "already expired", used in
several places in the code.
Closes#2021
... since the 'tv' stood for timeval and this function does not return a
timeval struct anymore.
Also, cleaned up the Curl_timediff*() functions to avoid typecasts and
clean up the descriptive comments.
Closes#2011
... to cater for systems with unsigned time_t variables.
- Renamed the functions to curlx_timediff and Curl_timediff_us.
- Added overflow protection for both of them in either direction for
both 32 bit and 64 bit time_ts
- Reprefixed the curlx_time functions to use Curl_*
Reported-by: Peter Piekarski
Fixes#2004Closes#2005
... a single double quote could leave the entry path buffer without a zero
terminating byte. CVE-2017-1000254
Test 1152 added to verify.
Reported-by: Max Dymond
Bug: https://curl.haxx.se/docs/adv_20171004.html
... to make all libcurl internals able to use the same data types for
the struct members. The timeval struct differs subtly on several
platforms so it makes it cumbersome to use everywhere.
Ref: #1652Closes#1693
Add a new type of callback to Curl_handler which performs checks on
the connection. Alter RTSP so that it uses this callback to do its
own check on connection health.
... all other non-HTTP protocol schemes are now defaulting to "tunnel
trough" mode if a HTTP proxy is specified. In reality there are no HTTP
proxies out there that allow those other schemes.
Assisted-by: Ray Satiro, Michael Kaufmann
Closes#1505
A) reduces the timeout lists drastically
B) prevents a lot of superfluous loops for timers that expires "in vain"
when it has actually already been extended to fire later on
Mark intended fallthroughs with /* FALLTHROUGH */ so that gcc will know
it's expected and won't warn on [-Wimplicit-fallthrough=].
Closes https://github.com/curl/curl/pull/1297
Replace use of fixed macro BUFSIZE to define the size of the receive
buffer. Reappropriate CURLOPT_BUFFERSIZE to include enlarging receive
buffer size. Upon setting, resize buffer if larger than the current
default size up to a MAX_BUFSIZE (512KB). This can benefit protocols
like SFTP.
Closes#1222
* HTTPS proxies:
An HTTPS proxy receives all transactions over an SSL/TLS connection.
Once a secure connection with the proxy is established, the user agent
uses the proxy as usual, including sending CONNECT requests to instruct
the proxy to establish a [usually secure] TCP tunnel with an origin
server. HTTPS proxies protect nearly all aspects of user-proxy
communications as opposed to HTTP proxies that receive all requests
(including CONNECT requests) in vulnerable clear text.
With HTTPS proxies, it is possible to have two concurrent _nested_
SSL/TLS sessions: the "outer" one between the user agent and the proxy
and the "inner" one between the user agent and the origin server
(through the proxy). This change adds supports for such nested sessions
as well.
A secure connection with a proxy requires its own set of the usual SSL
options (their actual descriptions differ and need polishing, see TODO):
--proxy-cacert FILE CA certificate to verify peer against
--proxy-capath DIR CA directory to verify peer against
--proxy-cert CERT[:PASSWD] Client certificate file and password
--proxy-cert-type TYPE Certificate file type (DER/PEM/ENG)
--proxy-ciphers LIST SSL ciphers to use
--proxy-crlfile FILE Get a CRL list in PEM format from the file
--proxy-insecure Allow connections to proxies with bad certs
--proxy-key KEY Private key file name
--proxy-key-type TYPE Private key file type (DER/PEM/ENG)
--proxy-pass PASS Pass phrase for the private key
--proxy-ssl-allow-beast Allow security flaw to improve interop
--proxy-sslv2 Use SSLv2
--proxy-sslv3 Use SSLv3
--proxy-tlsv1 Use TLSv1
--proxy-tlsuser USER TLS username
--proxy-tlspassword STRING TLS password
--proxy-tlsauthtype STRING TLS authentication type (default SRP)
All --proxy-foo options are independent from their --foo counterparts,
except --proxy-crlfile which defaults to --crlfile and --proxy-capath
which defaults to --capath.
Curl now also supports %{proxy_ssl_verify_result} --write-out variable,
similar to the existing %{ssl_verify_result} variable.
Supported backends: OpenSSL, GnuTLS, and NSS.
* A SOCKS proxy + HTTP/HTTPS proxy combination:
If both --socks* and --proxy options are given, Curl first connects to
the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS
proxy.
TODO: Update documentation for the new APIs and --proxy-* options.
Look for "Added in 7.XXX" marks.
Visual C++ now complains about implicitly casting time_t (64-bit) to
long (32-bit). Fix this by changing some variables from long to time_t,
or explicitly casting to long where the public interface would be
affected.
Closes#1131
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
Curl_select_ready() was the former API that was replaced with
Curl_select_check() a while back and the former arg setup was provided
with a define (in order to leave existing code unmodified).
Now we instead offer SOCKET_READABLE and SOCKET_WRITABLE for the most
common shortcuts where only one socket is checked. They're also more
visibly macros.
... it no longer takes printf() arguments since it was only really taken
advantage by one user and it was not written and used in a safe
way. Thus the 'f' is removed from the function name and the proto is
changed.
Although the current code wouldn't end up in badness, it was a risk that
future changes could end up springf()ing too large data or passing in a
format string inadvertently.
Since we're using CURLE_FTP_WEIRD_SERVER_REPLY in imap, pop3 and smtp as
more of a generic "failed to parse" introduce an alias without FTP in
the name.
Closes https://github.com/curl/curl/pull/975
When we're uploading using FTP and the server issues a tiny pause
between opening the connection to the client's secondary socket, the
client's initial poll() times out, which leads to second poll() which
does not wait for POLLIN on the secondary socket. So that poll() also
has to time out, creating a long (200ms) pause.
This patch adds the correct flag to the secondary socket, making the
second poll() correctly wait for the connection there too.
Signed-off-by: Ales Novak <alnovak@suse.cz>
Closes#978
curl_printf.h defines printf to curl_mprintf, etc. This can cause
problems with external headers which may use
__attribute__((format(printf, ...))) markers etc.
To avoid that they cause problems with system includes, we include
curl_printf.h after any system headers. That makes the three last
headers to always be, and we keep them in this order:
curl_printf.h
curl_memory.h
memdebug.h
None of them include system headers, they all do funny #defines.
Reported-by: David Benjamin
Fixes#743
... as it implies we need to check for that on all the other variable
references as well (as Coverity otherwise warns us for missing NULL
checks), and we're alredy making sure that the pointer is never NULL.
They tend to never get updated anyway so they're frequently inaccurate
and we never go back to revisit them anyway. We document issues to work
on properly in KNOWN_BUGS and TODO instead.
... and assign it from the set.fread_func_set pointer in the
Curl_init_CONNECT function. This A) avoids that we have code that
assigns fields in the 'set' struct (which we always knew was bad) and
more importantly B) it makes it impossibly to accidentally leave the
wrong value for when the handle is re-used etc.
Introducing a state-init functionality in multi.c, so that we can set a
specific function to get called when we enter a state. The
Curl_init_CONNECT is thus called when switching to the CONNECT state.
Bug: https://github.com/bagder/curl/issues/346Closes#346
In some timing-dependnt cases when a 4xx response immediately followed
after a 150 when a STOR was issued, this function would wrongly return
'complete == true' while 'wait_data_conn' was still set.
Closes#405
Reported-by: Patricia Muscalu
The multi state machine would otherwise go into the DO_MORE state after
DO, even for the case when the FTP state machine had already performed
those duties, which caused libcurl to get stuck in that state and fail
miserably. This occured for for active ftp uploads.
Reported-by: Patricia Muscalu
** WORK-AROUND **
The introduced non-blocking general behaviour for Curl_proxyCONNECT()
didn't work for the data connection establishment unless it was very
fast. The newly introduced function argument makes it operate in a more
blocking manner, more like it used to work in the past. This blocking
approach is only used when the FTP data connecting through HTTP proxy.
Blocking like this is bad. A better fix would make it work more
asynchronously.
Bug: https://github.com/bagder/curl/issues/278
With many easy handles using the same connection for multiplexing, it is
important we store and keep the transfer-oriented stuff in the
SessionHandle so that callbacks and callback data work fine even when
many easy handles share the same physical connection.
Since we just started make use of free(NULL) in order to simplify code,
this change takes it a step further and:
- converts lots of Curl_safefree() calls to good old free()
- makes Curl_safefree() not check the pointer before free()
The (new) rule of thumb is: if you really want a function call that
frees a pointer and then assigns it to NULL, then use Curl_safefree().
But we will prefer just using free() from now on.
The function "free" is documented in the way that no action shall occur for
a passed null pointer. It is therefore not needed that a function caller
repeats a corresponding check.
http://stackoverflow.com/questions/18775608/free-a-null-pointer-anyway-or-check-first
This issue was fixed by using the software Coccinelle 1.0.0-rc24.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
... and make sure we can connect the data connection to a host name that
is longer than 48 bytes.
Also simplifies the code somewhat by re-using the original host name
more, as it is likely still in the DNS cache.
Original-Patch-by: Vojtěch Král
Bug: http://curl.haxx.se/bug/view.cgi?id=1468
For consistency, as we seem to have a bit of a mixed bag, changed all
instances of ipv4 and ipv6 in comments and documentations to use the
correct case.
There was a confusion between these: this commit tries to disambiguate them.
- Scope can be computed from the address itself.
- Scope id is scope dependent: it is currently defined as 1-based local
interface index for link-local scoped addresses, and as a site index(?) for
(obsolete) site-local addresses. Linux only supports it for link-local
addresses.
The URL parser properly parses a scope id as an interface index, but stores it
in a field named "scope": confusion. The field has been renamed into "scope_id".
Curl_if2ip() used the scope id as it was a scope. This caused failures
to bind to an interface.
Scope is now computed from the addresses and Curl_if2ip() matches them.
If redundantly specified in the URL, scope id is check for mismatch with
the interface index.
This commit should fix SF bug #1451.
... for the local variable name in functions holding the return
code. Using the same name universally makes code easier to read and
follow.
Also, unify code for checking for CURLcode errors with:
if(result) or if(!result)
instead of
if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
Historically the default "unknown" value for progress.size_dl and
progress.size_ul has been zero, since these values are initialized
implicitly by the calloc that allocates the curl handle that these
variables are a part of. Users of curl that install progress
callbacks may expect these values to always be >= 0.
Currently it is possible for progress.size_dl and progress.size_ul
to by set to a value of -1, if Curl_pgrsSetDownloadSize() or
Curl_pgrsSetUploadSize() are passed a "size" of -1 (which a few
places currently do, and a following patch will add more). So
lets update Curl_pgrsSetDownloadSize() and Curl_pgrsSetUploadSize()
so they make sure that these variables always contain a value that
is >= 0.
Updates test579 and test599.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Make all code use connclose() and connkeep() when changing the "close
state" for a connection. These two macros take a string argument with an
explanation, and debug builds of curl will include that in the debug
output. Helps tracking connection re-use/close issues.
set.infilesize in this case was modified in several places, which could
lead to repeated requests using the same handle to get unintendent/wrong
consequences based on what the previous request did!
This makes the findprotocol() function work as intended so that libcurl
can properly be restricted to not support HTTP while still supporting
HTTPS - since the HTTPS handler previously set both the HTTP and HTTPS
bits in the protocol field.
This fixes --proto and --proto-redir for most SSL protocols.
This is done by adding a few new convenience defines that groups HTTP
and HTTPS, FTP and FTPS etc that should then be used when the code wants
to check for both protocols at once. PROTO_FAMILY_[protocol] style.
Bug: https://github.com/bagder/curl/pull/97
Reported-by: drizzt
When doing passive FTP, the multi state function needs to extract and
use the happy eyeballs sockets to wait for to check for completion!
Bug: http://curl.haxx.se/mail/lib-2014-02/0135.html (ruined)
Reported-by: Alan
Following commit 0aafd77fa4, replaced the internal usage of
FORMAT_OFF_T and FORMAT_OFF_TU with the external versions that we
expect API programmers to use.
This negates the need for separate definitions which were subtly
different under different platforms/compilers.
This patch adds a 200ms delay between the first and second address
family socket connection attempts.
It also iterates over IP addresses in the order returned by the
system, meaning most dual-stack systems will try IPv6 first.
Additionally, it refactors the connect code, removing most code that
handled synchronous connects. Since all sockets are now non-blocking,
the logic can be made simpler.
This patch invokes two socket connect()s nearly simultaneously, and
the socket that is first connected "wins" and is subsequently used for
the connection. The other is terminated.
There is a very slight IPv4 preference, in that if both sockets connect
simultaneously IPv4 is checked first and thus will win.
This is a regression since the switch to always-multi internally
c43127414d.
Test 1316 was modified since we now clearly call the Curl_client_write()
function when doing the LIST transfer part and then the
handler->protocol says FTP and ftpc.transfertype is 'A' which implies
text converting even though that the response is initially a HTTP
CONNECT response in this case.
