Daniel Stenberg
9e241864e3
Extracting the CURLINFO_PRIVATE pointer makes no point since nothing set
...
it. This caused a segfault in some fprintf() implementations. Like on Solaris.
2007-09-12 10:46:14 +00:00
Daniel Stenberg
9e88343a17
Daniel S (12 September 2007)
...
- Bug report #1792649 (http://curl.haxx.se/bug/view.cgi?id=1792649 ) pointed
out a problem with doing an empty upload over FTP on a re-used connection.
I added test case 541 to reproduce it and to verify the fix.
- I noticed while writing test 541 that the FTP code wrongly did a CWD on the
second transfer as it didn't store and remember the "" path from the
previous transfer so it would instead CWD to the entry path as stored. This
worked, but did a superfluous command. Thus, test case 541 now also verifies
this fix.
2007-09-11 22:23:57 +00:00
Dan Fandrich
d030dfa6e2
Added test case 1007 to test permission problem when uploading with TFTP
...
(to validate bug #1790403 ).
2007-09-07 20:05:20 +00:00
Dan Fandrich
6fd1cfeab1
Minor updates
2007-09-05 17:17:59 +00:00
Dan Fandrich
f6251734fc
Added more accurate error code returns from SFTP operations. Added test
...
case 615 to test an SFTP upload failure.
2007-08-30 23:03:59 +00:00
Dan Fandrich
9f44a95522
Renamed several libcurl error codes and options to make them more general
...
and allow reuse by multiple protocols. Several unused error codes were
removed. In all cases, macros were added to preserve source (and binary)
compatibility with the old names. These macros are subject to removal at
a future date, but probably not before 2009. An application can be
tested to see if it is using any obsolete code by compiling it with the
CURL_NO_OLDIES macro defined.
Documented some newer error codes in libcurl-error(3)
2007-08-30 20:34:57 +00:00
Dan Fandrich
5d4c981e13
Fixed a few compiler warnings. Try to do a slightly better job of
...
cleaning up after an OOM condition in curl_multi_add_handle
2007-08-30 18:26:19 +00:00
Dan Fandrich
5cb2ee878c
Mention that 'make test' does more than just run all the tests (suggested
...
by Kris/tinker105 in bug #1779054 ) and mention the torture tests.
2007-08-28 18:23:19 +00:00
Daniel Stenberg
7cba40b218
Bug report #1779054 ( http://curl.haxx.se/bug/view.cgi?id=1779054 ) pointed
...
out that libcurl didn't deal with large responses from server commands, when
the single response was consisting of multiple lines but of a total size of
16KB or more. Dan Fandrich improved the ftp test script and provided test
case 1006 to repeat the problem, and I fixed the code to make sure this new
test case runs fine.
2007-08-24 14:00:42 +00:00
Dan Fandrich
975fafdc49
Added test case 1005 to test excessively-long replies spread out over
...
multiple lines (similar to test case 1003).
2007-08-23 23:25:47 +00:00
Dan Fandrich
9537580ba2
Allow ftp server alternate replies to contain backslash-escaped control
...
characters.
2007-08-23 23:24:39 +00:00
Dan Fandrich
7ffae92daf
Need even more time to wait for an accept.
2007-08-23 18:45:28 +00:00
Dan Fandrich
abca03cf36
Added test1004 to validate a previous fix for a memory leak when an
...
empty proxy server is selected.
2007-08-23 17:35:00 +00:00
Daniel Stenberg
381e372939
Bug report #1779054 ( http://curl.haxx.se/bug/view.cgi?id=1779054 ) pointed
...
out that libcurl didn't deal with very long (>16K) FTP server response lines
properly. Starting now, libcurl will chop them off (thus the client app will
not get the full line) but survive and deal with them fine otherwise. Test
case 1003 was added to verify this.
2007-08-22 14:18:06 +00:00
Daniel Stenberg
c347db2e0a
added a size > buffer size check to make it easier to track this in the
...
future
2007-08-22 14:09:13 +00:00
Daniel Stenberg
232a4553b8
Upped the buffer size to 17000+ bytes to prepare for the upcoming test 1003
...
that verfies ridiculously long server response lines. Also changed sprintf
to snprintf in a few places.
2007-08-22 13:57:49 +00:00
Dan Fandrich
1a8d8aa227
Increase timeout for accept for improved reliability on loaded servers.
2007-08-20 17:53:38 +00:00
Daniel Stenberg
014fe6971e
remove stupid comment since there's no content in this test case
2007-08-17 22:24:51 +00:00
Daniel Stenberg
3217809294
Robson Braga Araujo filed bug report #1776235
...
(http://curl.haxx.se/bug/view.cgi?id=1776235 ) about ftp requests with NOBODY
on a directory would do a "SIZE (null)" request. This is now fixed and test
case 1000 was added to verify.
2007-08-17 22:22:43 +00:00
Daniel Stenberg
dcf698dc74
some keywords for future stats/coverage checks
2007-08-17 22:17:23 +00:00
Daniel Stenberg
54117be639
Moved the 5320 and 5322 into the 1000-series instead which is a documented
...
range. They are about FTP but the 100-199 range is full.
2007-08-17 22:11:25 +00:00
Daniel Stenberg
5a79532aee
Song Ma provided a patch that cures a problem libcurl has when doing resume
...
HTTP PUT using Digest authentication. Test case 5320 and 5322 were also
added to verify the functionality.
2007-08-17 20:21:32 +00:00
Dan Fandrich
652e2cf57c
Removed redundant dependency lines
2007-08-13 18:11:37 +00:00
Dan Fandrich
c7a66d5af4
There's no need to ignore the User-Agent for this test.
2007-08-09 03:28:16 +00:00
Dan Fandrich
2e60ca382d
Fixed some icc compiler warnings.
2007-08-07 00:10:27 +00:00
Daniel Stenberg
6f750f3b57
Dmitriy Sergeyev reported a regression: resumed file:// transfers broke
...
after 7.16.2. This is much due to the different treatment file:// gets
internally, but now I added test 231 to make it less likely to happen again
without us noticing!
2007-08-02 14:09:08 +00:00
Dan Fandrich
5ecd56d964
Implemented only the parts of Patrick Monnerat's OS/400 patch that renamed
...
some few internal identifiers to avoid conflicts, which could be useful on
other platforms.
2007-07-23 18:51:22 +00:00
Dan Fandrich
cc44fb1dc8
Log the "<CMD> wasn't handled" error normally since it is now expected
...
to occur in a couple of tests.
2007-07-23 17:51:43 +00:00
Daniel Stenberg
4bbcc47f3f
Added test case 354 that makes a simple FTP retrieval without password, which
...
verifies the bug fix in #1757328 .
2007-07-22 10:08:59 +00:00
Daniel Stenberg
8ab495a088
test and verify curl -I on a single FTP file somewhat more than before
2007-07-21 21:49:23 +00:00
Daniel Stenberg
84e7bb85b1
To allow more flexibility in FTP test cases, I've removed the enforced states
...
from the test server code as they served no real purpose. The test server is
here to serve for the test cases, not to attempt to function as a real server!
2007-07-21 21:48:58 +00:00
Dan Fandrich
c7db74fe73
Revert the 512 change since newer versions of OpenSSH don't support DSA
...
keys that small.
2007-07-19 01:42:22 +00:00
Dan Fandrich
89d119646d
Use 512 bit keys to reduce the time taken to generate them. This shouldn't
...
really reduce security since in the common case of a daily automated build
the keys are only used for a single test run lasting a few minutes before
being deleted.
2007-07-18 00:27:13 +00:00
Dan Fandrich
989dd9c34a
Fixed test cases 613 and 614 by improving the log postprocessor to handle
...
a new directory listing format that newer libssh2's can provide. This
is probably NOT sufficient to handle all directory listing formats that
server's can provide and should be revisited.
2007-07-17 21:53:38 +00:00
Daniel Stenberg
98b9349be7
make it do all three requests on the same connection
2007-07-16 21:44:46 +00:00
Daniel Stenberg
1da3d402f6
convert test case 540 to use a custom Host: header as well
2007-07-15 21:00:26 +00:00
Daniel Stenberg
1da3192d2d
let's just export the whole argc + argv pair globally so that each test tool
...
can take advantage of it however they see fit!
2007-07-15 20:59:43 +00:00
Daniel Stenberg
15c8219340
Added test case 540 and lib540.c, the 'proxyauth.c' test app posted by Shmulik
...
Regev on the libcurl mailing list on 10 Jul 2007, converted to a test case.
2007-07-14 22:39:22 +00:00
Daniel Stenberg
5ae21ebde9
add support for arg3 as the third argument...
2007-07-14 22:38:18 +00:00
Daniel Stenberg
c7e0d8c30b
add some better logging when HTTP server start fails, and make the failure
...
really hard if the test server can't be resolved (like for ::1 ipv6)
2007-07-14 22:33:46 +00:00
Daniel Stenberg
a53ba060c8
start the retry delay at 10 ms, double it for every failed attempt which makes
...
it 10 seconds delay after 11 attempts
2007-07-12 17:03:45 +00:00
Gunter Knauf
72bb5854f7
the timeout was probably too short with max = 1 sec, so lets test with 5 sec.
2007-07-12 10:54:15 +00:00
Gunter Knauf
0878b14f79
added time loop to sockfilt.c in order to wait for SO_REUSEADDR;
...
added go_sleep() to util.c.
2007-07-12 01:07:49 +00:00
Dan Fandrich
814b471d55
Added a code coverage section using gcc and gcov.
2007-07-10 22:55:51 +00:00
Dan Fandrich
19631f5d5f
Force the time zone to GMT in the cookie tests in case the user is
...
using one of the so-called 'right' time zones that take into account
leap seconds, which causes the tests to fail (as reported by
Daniel Black in bug report #1745964 ).
2007-07-10 22:27:16 +00:00
James Housley
a8d6b40736
The previous commits changed the error code
2007-07-10 22:26:59 +00:00
Dan Fandrich
93bd512357
Fixed a curl memory leak reported by Song Ma with a modified version
...
of the patch he suggested. Added his test case as test289 to verify.
2007-07-10 22:23:16 +00:00
Dan Fandrich
598bc3968e
Add -a when running torture tests now that it's supported.
2007-07-05 01:38:00 +00:00
Gunter Knauf
c8a47bf662
revert previous patch since it turned out that older cp dont know this switch, argh!
2007-06-28 22:31:18 +00:00
James Housley
aed0cc6f2a
Using fdopen() is a more correct way to implement the CURLOPT_NEW_FILE_PREMS
...
file.c, but the debug interface was missing. This adds the routines needed
to make the memory debuging work for fdopen().
2007-06-28 11:11:29 +00:00
Gunter Knauf
5df5a2aa54
fixed nasty cp warnings about not beeing able to preserve ownership.
2007-06-28 01:20:30 +00:00
Daniel Stenberg
974fa1242a
Adjusted how libcurl treats HTTP 1.1 responses without content-lenth or
...
chunked encoding (that also lacks "Connection: close"). It now simply
assumes that the connection WILL be closed to signal the end, as that is how
RFC2616 section 4.4 point #5 says we should behave.
2007-06-25 13:58:14 +00:00
Daniel Stenberg
a1b650ad7b
Gerrit Bruchhuser pointed out a warning that the Intel(R) Thread Checker
...
tool reports and it was indeed a legitimate one and it is one fixed. It was
a use of a share without doing the proper locking first.
2007-06-21 14:23:38 +00:00
Daniel Stenberg
fc3c5dae87
and fix another flaw in the singlecwd case when we get ftp://site.com/, also
...
from the #1739100 bug report
2007-06-19 12:33:28 +00:00
Daniel Stenberg
cc26cc5dcd
Test listing of root dir with the three ftp-methods. KNOWN_BUGS #44 make me
...
disable test 351 by default by I add the test case anyway to make it easier
to work on this problem in the future.
2007-06-18 21:04:05 +00:00
Daniel Stenberg
b0aa11fde7
Tom Regner added /usr/lib/misc to the path to scan for sftp to make the
...
sftp tests run fine on gentoo
2007-06-14 21:16:08 +00:00
Dan Fandrich
c45d44fee9
Wait longer for servers to start up since the ssh server needs to generate
...
keys the first time (which can take a while on a slow or loaded host).
Enforce a longer startup wait time for the ssh client SOCKS server, too.
Check for an error code from startnew() when starting any server.
2007-06-11 17:53:10 +00:00
Dan Fandrich
1e718a515a
We do not use RSA keys in the test suite.
2007-06-11 17:49:25 +00:00
Dan Fandrich
477e27f99d
Fixed the test harness so that it actually kills the ssh being used as
...
the SOCKS server.
2007-06-08 18:56:05 +00:00
Dan Fandrich
6a84d492f1
Improved compatibility with perl 5.0 on the 'open' calls.
2007-06-08 17:32:24 +00:00
Dan Fandrich
873d95a34c
Incorporated Daniel Black's test706 and test707 SOCKS test cases.
2007-06-08 17:21:40 +00:00
Dan Fandrich
1500e95839
Improved compatibility with perl 5.0 on the 'open' calls.
2007-06-08 17:03:50 +00:00
Dan Fandrich
ad80490711
Changed the opens to work on older versions of perl.
...
Redirect ssh output to ssh.log
2007-06-07 22:42:26 +00:00
Dan Fandrich
073a6cea45
Renamed the sshd log file to sshd.log.
...
Added more options to the ssh config file to improve the consistency of
the test environment.
Force a rewrite of the ssh config files on every invocation.
Changed the opens to work on older versions of perl.
2007-06-07 21:42:33 +00:00
Dan Fandrich
345ffd1163
Cleaned up SOCKS tests. Use a magic port number instead of killserver
...
to do nonlistening server tests, like other tests.
2007-06-07 20:14:00 +00:00
Dan Fandrich
f0ffb35d55
Fixed some problems in starting SSH for use in SOCKS.
2007-06-07 19:49:09 +00:00
Daniel Stenberg
e86dfd9688
added 703: a socks5 version of 702
2007-06-05 13:52:34 +00:00
Daniel Stenberg
a466b31574
Daniel Black's test suite fixes and initial test cases for SOCKS4/5 using
...
openssh
2007-06-05 13:50:59 +00:00
Yang Tse
9583b51d80
In case of test failure, try not to show log files of other tests
2007-05-30 17:15:05 +00:00
Dan Fandrich
09fd3b4935
Match file times occurring in the morning.
2007-05-16 17:45:53 +00:00
Dan Fandrich
ea43bb013b
Added support for quote commands before a transfer using SFTP and test
...
case 614.
Allow SFTP quote commands chmod, chown, chgrp to set a value of 0.
2007-05-15 00:28:50 +00:00
Dan Fandrich
b0a4c992e7
Added SFTP directory listing test case 613.
2007-05-14 22:03:42 +00:00
Dan Fandrich
85707460e5
Added FTPS upload tests 408 and 409.
2007-05-10 20:03:20 +00:00
Dan Fandrich
ed998270aa
Added FTPS test cases 406 and 407
2007-05-08 22:14:30 +00:00
Dan Fandrich
6c8e6549d0
Check the return code from curl_multi_add_handle()
2007-05-02 06:02:13 +00:00
Dan Fandrich
5187faeeb9
Improved the test harness to allow running test servers on other than
...
the default port numbers, allowing more than one test suite to run
simultaneously on the same host.
2007-04-30 20:15:33 +00:00
Dan Fandrich
1228ec9fbb
Fixed some tests to stop hard-coding the port number.
2007-04-30 19:05:48 +00:00
Dan Fandrich
f213d0db98
Added support in runtests.pl for "!n" test numbers to disable individual tests.
2007-04-25 23:18:52 +00:00
Dan Fandrich
9bdb05b4d6
When displaying log files, truncate the really longs ones such as you
...
would get from a torture test.
2007-04-25 20:09:32 +00:00
Dan Fandrich
61d7e720a5
Treat log files and -k the same when running torture tests as when not.
2007-04-24 23:28:57 +00:00
Dan Fandrich
17507eac85
Clear out FTP server options before each new client.
...
Wait for child processes to die to avoid creating zombies.
2007-04-24 21:30:39 +00:00
Dan Fandrich
6a35841b2e
Added tests 610-612 to test more SFTP post-quote commands.
2007-04-23 23:00:38 +00:00
Dan Fandrich
28dde78dde
Added <postcheck> support to the test harness.
2007-04-23 22:58:45 +00:00
Dan Fandrich
37171809f6
Mention NSS, <postcmd> commands
2007-04-23 21:18:30 +00:00
Dan Fandrich
3398eca7c3
Changed another nonexistent host name to be under the haxx.se domain
...
to guarantee against it ever being valid.
2007-04-23 01:51:02 +00:00
Dan Fandrich
043070f90e
Changed an error message slightly so it can be caught easier by the
...
autobuild logs scanner.
2007-04-20 17:16:32 +00:00
Dan Fandrich
ae3d5949b8
Various test file cleanups, including using <servercmd> instead of writing
...
directly to ftpserver.cmd and removing unneeded empty sections.
2007-04-18 20:22:01 +00:00
Dan Fandrich
66fc5498d2
Added test cases 296, 297 and 298 to test --ftp-method handling
2007-04-18 06:30:28 +00:00
Daniel Stenberg
e3dab1bea2
jayjwa added the "DH PARAMETERS" to make this work with recent stunnels
2007-04-14 20:29:09 +00:00
Dan Fandrich
71a0d50f48
Added test cases 294 and 295 to test --ftp-account handling
2007-04-13 20:59:15 +00:00
Yang Tse
8d2a0fe85b
Fix test case 534 which started to fail 2007-04-13 due to the existance
...
of a new host on the net with the same silly domain the test was using
for a host which was supposed not to exist.
2007-04-13 11:35:19 +00:00
Dan Fandrich
35935d71d2
Honour the -a option when -t is enabled.
2007-04-10 00:37:56 +00:00
Dan Fandrich
de17f4436e
Changed error return codes to match update code.
2007-04-09 18:24:56 +00:00
Yang Tse
248a5381d4
In case of test failure, try not to show log files of other tests
2007-04-06 04:24:13 +00:00
Dan Fandrich
c1ab3e2d59
Enabled the ssh tests 600-609.
2007-04-05 19:28:33 +00:00
Yang Tse
a0a79ce853
unify fopen() failure error message among tests, allowing
...
the testsuite to count them as errors of the same kind
2007-04-05 11:05:36 +00:00
Yang Tse
70f9a13ecb
Further improve displaying of individual logfiles
2007-04-05 00:14:27 +00:00
Yang Tse
5625e5d5b8
add debug message and expand comment
2007-04-04 08:58:36 +00:00
Yang Tse
8a529bd987
test can be allowed to run if fopen() is capable of fopen()ing
...
three additional files once that we have already open()ed the
big bunch of file descriptors.
2007-04-04 06:39:03 +00:00
Yang Tse
a1f72943e9
cleanup
2007-04-04 05:04:47 +00:00
Dan Fandrich
0969a96732
Whoops--didn't mean to enable the ssh tests quite yet.
2007-04-04 04:57:40 +00:00
Yang Tse
ec8019b2a8
test can be allowed to run if fopen() is capable of fopen()ing
...
SAFETY_MARGIN additional files once that we have already open()ed
the big bunch of file descriptors.
2007-04-04 03:19:59 +00:00
Dan Fandrich
27d2d78059
Added more SSH tests (left disabled for now).
2007-04-04 00:48:37 +00:00
Yang Tse
584f3639e3
update copyright year
2007-04-03 18:25:18 +00:00
Yang Tse
2886ce96b0
Verify if the test is limited by an ancient stdio with a 256
...
open file limit. In this case the test is skipped with a
message showing this limitation when the number of open files
needed for the test is greater than 256.
2007-04-03 18:02:02 +00:00
Yang Tse
3344142b87
fix enumeration of disabled tests when they have the highest number
2007-04-03 15:59:52 +00:00
Yang Tse
70550a0572
Improve displaying of logfiles making sure all lines end with \n
...
and avoid using ! as last char of line.
2007-04-03 12:27:03 +00:00
Yang Tse
7bbad0b534
try not to link with unneeded libs, avoiding global LDADD
2007-04-03 02:57:54 +00:00
Yang Tse
161be66c89
when detecting un/supported sshd options use curl's sshd config file.
2007-04-03 02:36:55 +00:00
Dan Fandrich
4095c9de37
Eliminate the sshd option checking dependency on wc and make it faster.
2007-04-03 00:06:39 +00:00
Yang Tse
b8c12fe658
fix error in previous commit
2007-04-02 04:14:59 +00:00
Yang Tse
bdbaedc452
verify ssh daemon version
2007-04-02 01:21:57 +00:00
Gunter Knauf
0839621f47
print update message only if we really update CVS.
2007-04-01 13:59:50 +00:00
Dan Fandrich
ef10eaeb29
Added scp and sftp nonexistent file retrieval tests, but leave them
...
disabled for now.
2007-04-01 06:28:12 +00:00
Dan Fandrich
f8d78d57a7
Disable the SSH tests until the libssh2 bugs that causes test hangs
...
are sorted out.
2007-03-31 20:00:40 +00:00
Yang Tse
fdc1b61507
sshd might fail to start if given an unsupported configuration option.
...
Try to avoid this problem checking for some possible unsupported options,
and avoid using them in the configuration file.
2007-03-31 03:21:08 +00:00
Dan Fandrich
7fd154f094
Fixed some typos in the comments.
2007-03-30 22:07:48 +00:00
Dan Fandrich
a209c32bf3
Resurrected old FTPS error tests 402 and 403 as 404 and 405.
2007-03-30 22:04:14 +00:00
Dan Fandrich
40981286ea
Added HTTP --max-filesize tests and FTPS CCC failure test.
2007-03-30 18:50:55 +00:00
Yang Tse
f55a1c3a6c
Searching for sshd and sftp-server will be done first
...
in the PATH and afterwards in other common locations.
2007-03-30 10:11:49 +00:00
Yang Tse
c5586a65c2
ignore more generated files
2007-03-30 02:59:39 +00:00
Dan Fandrich
ffb11ad5c6
Don't tear down the ftp connection if the maximum filesize was exceeded
...
and added tests 290 and 291 to check.
2007-03-30 01:13:47 +00:00
Dan Fandrich
fbb1e49215
Added FTP-SSL failure test 402
2007-03-30 00:08:41 +00:00
Dan Fandrich
c26320d94f
Added ftps upload test 401
2007-03-29 22:50:23 +00:00
Dan Fandrich
c563a53c16
Eliminated extra / in scp/sftp URLs.
2007-03-29 19:19:06 +00:00
Dan Fandrich
e37a49086e
Add another option to tighten the test environment.
2007-03-29 18:46:09 +00:00
Dan Fandrich
f776c1d2eb
Abort if attempting to run as root.
2007-03-29 05:25:11 +00:00
Dan Fandrich
31b1e988f4
Only show exit status in verbose mode.
2007-03-28 04:36:09 +00:00
Dan Fandrich
884171aecf
Don't launch sshd as a daemon so its output can be logged.
2007-03-28 04:05:55 +00:00
Dan Fandrich
282127fbff
Tighten up a few more OpenSSH options
2007-03-27 04:01:39 +00:00
Dan Fandrich
2166645ce4
Added SFTP and SCP upload tests in test602 & test603
2007-03-26 19:23:00 +00:00
Dan Fandrich
844f5b6b45
Added test600 and test601, SFTP and SCP file retrieval tests.
2007-03-26 18:04:05 +00:00
Gunter Knauf
424063235b
catch up new lib extension when build with gcc/nlmconv.
2007-03-26 17:18:36 +00:00
Dan Fandrich
3b355421ec
Added sshserver.pl
2007-03-24 06:29:58 +00:00
Dan Fandrich
0dd1219668
Fixed a memory leak when specifying a proxy with a file: URL and added
...
test case 288 to verify it.
2007-03-24 02:15:20 +00:00
Dan Fandrich
b7131009fb
Changed the test harness to attempt to gracefully shut down servers
...
before resorting to the kill -9 hammer.
Added test harness infrastructure to support scp/sftp tests, using
OpenSSH as the server.
2007-03-24 01:01:28 +00:00
Daniel Stenberg
0c817b6614
language fix
2007-03-18 23:16:36 +00:00
Daniel Stenberg
ff314d7600
detect and show if built with yassl, but also set the "openssl" flag internally
...
since that is the API yassl attempts to provide
2007-03-18 22:37:23 +00:00
Daniel Stenberg
c1f3edbdd1
openssl/bio.h doesn't exist when we build with yassl so avoid trying
2007-03-16 22:44:46 +00:00
Dan Fandrich
a20a6f67c5
Fixed the test case to use a truly invalid urlglob range.
2007-03-16 04:34:53 +00:00
Dan Fandrich
ae07fd2ba8
libcurl supplies its own crypto hash functions when SSL is disabled, so
...
'crypto' tests aren't dependent on SSL. Compiling with
--disable-crypto-auth will cause test failures, however.
2007-03-12 20:50:16 +00:00
Yang Tse
40087ce7c0
change max allowed time for this test to complete to 90 seconds
2007-03-10 00:19:05 +00:00
Dan Fandrich
e12d46ac50
Updated the test harness to add a new "crypto" feature check and updated the
...
appropriate test case to use it. For now, this is treated the same as the
"SSL" feature because curl doesn't list it separately.
2007-03-09 23:39:42 +00:00
Dan Fandrich
1962ebf8e7
Updated the test harness to check for protocol support before running each
...
test, fixing KNOWN_BUGS #11 . Fixed some tests to more accurately specify
their required servers and features.
2007-03-09 21:01:39 +00:00
Dan Fandrich
7c144d5a7e
Made a few cleanups.
2007-03-08 20:00:28 +00:00
Dan Fandrich
0f0540d00b
Added SSL as a required feature for test case 400.
2007-03-08 19:50:32 +00:00
Dan Fandrich
1bfa7dfe39
Added test infrastructure to support basic FTPS tests. This currently
...
supports only ftps:// URLs with --ftp-ssl-control specified, which
implicitly encrypts the control channel but not the data channels. That
allows stunnel to be used with an unmodified ftp server in exactly the
same way that the test https server is set up.
Added test case 400 as a basic FTPS test.
2007-03-08 02:38:49 +00:00
Yang Tse
e5f8e5e57a
stricter newline policy
2007-03-03 05:16:57 +00:00
Yang Tse
53a3abc76b
30 seconds isn't long enough for this test on a loaded server.
2007-03-03 04:27:19 +00:00
Yang Tse
bfd6474f6b
stricter newline policy
2007-03-03 02:06:44 +00:00
Yang Tse
cef5b14baa
Reduce the posibility of leaving the sockfilter hanging around when
...
tearing down the test ftp server due to a read error condition.
2007-03-01 16:42:02 +00:00
Yang Tse
e817eb6cec
log a 1120 chars long string to aid in quoted-printable and soft
...
line break detection in daily build logs.
2007-02-27 23:46:48 +00:00
Dan Fandrich
fe0afb211e
5 seconds isn't always enough time to start a server on a loaded system.
2007-02-22 18:35:57 +00:00
Yang Tse
141b3d0c2f
remove redundant check in timestamp detection
2007-02-22 17:34:02 +00:00
Yang Tse
69565afab0
Check for stdbool.h at configuration stage, and include it if available.
...
Check for lowercase 'bool' type at configuration stage. If not available
provide a suitable replacement with a type definition of 'unsigned char'
in setup_once.h
Move definitions of TRUE and FALSE to setup_once.h
2007-02-22 02:51:54 +00:00
Daniel Stenberg
f19d333ef6
- Ravi Pratap provided work on libcurl making pipelining more robust and
...
fixing some bugs:
o Don't mix GET and POST requests in a pipeline
o Fix the order in which requests are dispatched from the pipeline
o Fixed several curl bugs with pipelining when the server is returning
chunked encoding:
* Added states to chunked parsing for final CRLF
* Rewind buffer after parsing chunk with data remaining
* Moved chunked header initializing to a spot just before receiving
headers
2007-02-21 21:59:40 +00:00
Yang Tse
29bb6f65f1
Move header file inclusion logic and definition of timeval
...
struct for platforms that don't have it to setup_once.h
2007-02-20 12:12:27 +00:00
Yang Tse
37f07a54bd
Several corrections & changes to what has been stated in revision 1.45
...
1) The maketgz script does not insert the timestamp in curlver.h,
it actually updates it. For CVS versions it is the "CVS" string.
2) testcurl.pl will always print the "date" string which represents
the moment the test build is run.
3) testcurl.pl may not print the "timestamp" string since the script
may end before it is printed out. (i.e. unable to update from CVS)
4) The "timestamp" string printed will be the same as the "date" one
unless one of the following conditions is met.
*) It is a tarball-based build. Timestamp will be creation time.
*) CVS update has been done. Timestamp will be end of CVS update.
2007-02-20 05:28:41 +00:00
Yang Tse
da8c666e4f
add tutil_tvdiff_secs() for completeness
2007-02-20 01:09:38 +00:00
Yang Tse
78a1e5d1a6
fix typo
2007-02-19 19:46:07 +00:00
Yang Tse
116f60e063
Show libcurl's timestamp. This timestamp is only available in curlver.h
...
for tarball-based tests and builds, the maketgz script inserts it when
the tarball is created. For CVS-based tests and builds the timestamp we
show is the current UTC build time as it is the CVS version timestamp.
In this way, all builds will have a valid source code timestamp which
isn't related to the moment the tests and build is performed, with the
exception of CVS-based ones which have the same "date" and "timestamp"
2007-02-19 19:41:48 +00:00
Yang Tse
75fca27f8e
log a message, stating the need of openssl to run this test
2007-02-19 04:51:47 +00:00
Yang Tse
f2cd2882a0
Oops missing var
2007-02-19 03:59:41 +00:00
Yang Tse
31e598d2f3
add debug messages for initialization failures
2007-02-19 02:03:58 +00:00
Yang Tse
d9bf55570b
Move portable error number symbolic name definitions to setup_once.h
2007-02-17 13:51:24 +00:00
Yang Tse
789fd0b74a
Replicate the configure tests that determined that timeval was available.
2007-02-17 11:43:52 +00:00
Dan Fandrich
3f140a6008
getpart implicitly drags in some networking functions, so it needs to be
...
linked to the networking libraries.
2007-02-17 08:16:53 +00:00
Dan Fandrich
a0a47f2767
Better separate the library dependencies into those required by libcurl
...
and those required by other components to avoid forcing unneeded
dependencies into the target objects.
2007-02-17 01:29:01 +00:00
Dan Fandrich
213017e9cf
Remove C99isms
2007-02-17 01:25:32 +00:00
Yang Tse
d46cab4a94
add debug messages for fopen() failures
2007-02-16 19:41:25 +00:00
Yang Tse
4dc453c087
add debug messages for fopen() failures
2007-02-16 19:17:05 +00:00
Yang Tse
a1d5983991
use macros ERRNO, SET_ERRNO(), SOCKERRNO and SET_SOCKERRNO() for errno handling
2007-02-16 18:19:35 +00:00
Yang Tse
4894ce16fc
use macros ERRNO, SET_ERRNO(), SOCKERRNO and SET_SOCKERRNO() for errno handling
2007-02-16 16:01:19 +00:00
Yang Tse
5a267c4312
compiler warning fix
2007-02-14 13:46:08 +00:00
Yang Tse
7033a1c072
enhance HTTP server request input writing,
...
retrying upon EINTR errors.
2007-02-14 00:28:01 +00:00
Daniel Stenberg
4efa0d9f68
ftp@example.com is now the new anonymous FTP password. I opted for 'ftp' on
...
the left side of @ to make it short(er).
2007-02-13 22:50:16 +00:00
Daniel Stenberg
7f70dbcad5
Rob Crittenden added support for NSS (Network Security Service) for the
...
SSL/TLS layer. http://www.mozilla.org/projects/security/pki/nss/
2007-02-12 22:32:37 +00:00
Yang Tse
8c9233f6b2
Include both testutil.c and testutil.h, and not just testutil.c, in the
...
list of source files for those tests that use it. Otherwise testutil.h
might not be found by the compiler.
2007-02-09 12:41:57 +00:00
Yang Tse
6fcf98f617
Some tests were using functions curlx_tvnow and curlx_tvdiff which are not
...
part of the official libcurl API http://curl.haxx.se/lxr/source/lib/README.curlx
The documented way of using them would be to use timeval.c as a source code file.
The above described method works very well when statically linking libcurl and
apps, test programs, but has several drawbacks when you build a true shared
libcurl (i.e. Name space clash at linkage stage as functions are defined more
than once. Windows makefiles are not capable of handling this system of
source-level sharing)
So...
Now testutil.h and testutil.c define and implement tutil_tvnow and tutil_tvdiff
which replace curlx_tvnow and curlx_tvdiff for the libtest programs. Doing this
we avoid the above described problems, and the code in the testsuite does not
impose the need to keep those functions public in libcurl even when not part of
the API.
2007-02-09 01:17:24 +00:00
Yang Tse
2f4fe0175b
Some tests were using functions curlx_tvnow and curlx_tvdiff which are not
...
part of the official libcurl API http://curl.haxx.se/lxr/source/lib/README.curlx
The documented way of using them would be to use timeval.c as a source code file.
The above described method works very well when statically linking libcurl and
apps, test programs, but has several drawbacks when you build a true shared
libcurl (i.e. Name space clash at linkage stage as functions are defined more
than once. Windows makefiles are not capable of handling this system of
source-level sharing)
So...
Now testutil.h and testutil.c define and implement tutil_tvnow and tutil_tvdiff
which replace curlx_tvnow and curlx_tvdiff for the libtest programs. Doing this
we avoid the above described problems, and the code in the testsuite does not
impose the need to keep those functions public in libcurl even when not part of
the API.
2007-02-09 01:11:14 +00:00
Yang Tse
9b6474378a
Year 2038 has its own problems (32 bit integer overflow).
...
So cookie expiration date is lowered to expire at most in 2035.
2007-02-05 02:38:25 +00:00
Gisle Vanem
a7748c2024
Constify argument to suburl(). Remove trailing space.
2007-02-04 12:12:02 +00:00
Yang Tse
c26ec47e90
compiler warning fix
2007-02-02 17:16:06 +00:00
Yang Tse
f71c8c7d84
fix leftover updating cookie expiration date
2007-02-02 11:49:15 +00:00
Yang Tse
68f3c2adca
reported in bug: #1566077 the former URL mentioned in the generated cookie
...
jar has died and we now instead point out our own version of that
2007-02-02 02:12:34 +00:00
Yang Tse
2a8e2edf83
fix test case 62 which was failing due to cookies expiring 1 Feb 2007
2007-02-02 01:36:08 +00:00
Yang Tse
401598c2fe
more fixes for the testsuite cookie expiration issue
2007-02-02 01:05:50 +00:00
Yang Tse
d60848d04b
cookie expiration time got us with pants at our knees.
...
Next time in 2038 :-)
2007-02-02 00:10:40 +00:00
Yang Tse
c2639e0738
when using select() instead of poll, skip the test if the number of
...
open file descriptors is greater than FD_SETSIZE minus SAFETY_MARGIN,
also skip the test if any of the open file descriptors has a number
greater than FD_SETSIZE minus SAFETY_MARGIN.
2007-01-31 15:34:53 +00:00
Yang Tse
d7d5baa0e2
fix temp string buffer variable name
2007-01-30 13:21:39 +00:00
Yang Tse
bad67830b3
skip test on platforms on which we use select() instead
...
of poll() and select() happens to be bound by FD_SETSIZE
2007-01-30 03:48:29 +00:00
Daniel Stenberg
a4b39c6ab8
the same source file is re-used for multiple tests and I missed to add the
...
timval.c dependency on some of those
2007-01-29 20:37:02 +00:00
Gisle Vanem
d10e174fd1
Some compilers lacks <sys/time.h>. Include "timeval.h" to simplify the #ifdefs.
2007-01-29 20:24:00 +00:00
Daniel Stenberg
4d8dcf7b77
the libtest source codes that use curlx_tv* functions MUST use the
...
lib/timeval.c source code since those functions are not in the API (and might
not be accessible)
2007-01-29 10:09:06 +00:00
Daniel Stenberg
abdbd3100f
- Michael Wallner reported that when doing a CONNECT with a custom User-Agent
...
header, you got _two_ User-Agent headers in the CONNECT request...! Added
test case 287 to verify the fix.
2007-01-29 09:26:36 +00:00
Yang Tse
e09450103b
Compiler warning fix
2007-01-28 03:51:10 +00:00
Yang Tse
b6f889085d
update copyright year notice
2007-01-27 03:43:05 +00:00
Gunter Knauf
abb4cdafe9
set proper lib extension for non-configure mingw32 builds on Win32.
2007-01-25 14:06:38 +00:00
Dan Fandrich
44ac2776ae
Fixed a dangling pointer problem that prevented the http_proxy environment
...
variable from being properly used in many cases (and caused test case 63
to fail).
2007-01-25 01:35:43 +00:00
Dan Fandrich
f68323da7d
Ignore XML DOCTYPEs and declarations.
2007-01-23 20:24:26 +00:00
Dan Fandrich
33bea767eb
Convert (most of) the test data files into genuine XML. A handful still
...
are not, due mainly to the lack of support for XML character entities
(e.g. & => & ). This will make it easier to validate test files using
tools like xmllint, as well as edit and view them using XML tools.
2007-01-23 02:25:56 +00:00
Dan Fandrich
6da70628c6
Make the test script tag parser a bit more robust.
...
Check for the .exe extension on mingw32 builds.
2007-01-18 20:32:46 +00:00
Dan Fandrich
3bae748256
Added precheck that curl supports the 'openssl' engine in test 307.
2007-01-18 18:04:20 +00:00
Dan Fandrich
521c4b303d
Fixed some tag typos in the test data files.
2007-01-17 20:36:56 +00:00
Dan Fandrich
a2effd123a
Disabled test 307 for now.
2007-01-17 19:23:32 +00:00
Dan Fandrich
32fe5b14ec
Added simple OpenSSL crypto engine tests.
2007-01-16 18:34:58 +00:00
Dan Fandrich
f11d3c329c
Added TFTP upload tests.
2007-01-15 21:06:12 +00:00
Dan Fandrich
b0d13fa4cb
Leave the TFTPD test server running after a file upload.
...
Flush the protocol log data so it's immediately available to the test harness.
2007-01-15 21:03:53 +00:00
Dan Fandrich
5ec5b95f54
Added test for TFTP retrieve of boundary case 512 byte file.
2007-01-10 23:40:22 +00:00
Dan Fandrich
7efb955fd0
Added test of TFTP server error reporting.
2007-01-10 03:32:19 +00:00
Daniel Stenberg
e61e09f658
prevent compiler warning since we use base64.h from libcurl which now has
...
function(s) using SessionHandle pointers
2007-01-04 23:04:50 +00:00
Daniel Stenberg
88c8d72a21
Alexey Simak found out that when doing FTP with the multi interface and
...
something went wrong like it got a bad response code back from the server,
libcurl would leak memory. Added test case 538 to verify the fix.
I also noted that the connection would get cached in that case, which
doesn't make sense since it cannot be re-use when the authentication has
failed. I fixed that issue too at the same time, and also that the path
would be "remembered" in vain for cases where the connection was about to
get closed.
2006-12-11 09:32:58 +00:00
Daniel Stenberg
090f5a9a45
added the new test 282
2006-11-25 13:32:48 +00:00
Daniel Stenberg
da58d03ff7
Venkat Akella found out that libcurl did not like HTTP responses that simply
...
responded with a single status line and no headers nor body. Starting now, a
HTTP response on a persistent connection (i.e not set to be closed after the
response has been taken care of) must have Content-Length or chunked
encoding set, or libcurl will simply assume that there is no body.
To my horror I learned that we had no less than 57(!) test cases that did bad
HTTP responses like this, and even the test http server (sws) responded badly
when queried by the test system if it is the test system. So although the
actual fix for the problem was tiny, going through all the newly failing test
cases got really painful and boring.
2006-11-25 13:32:04 +00:00
Yang Tse
268fe09322
Revert ftpserver.pl back to revision 1.74 Adding change done in 1.76
...
This is done to back out changes done in revisions 1.77 and 1.75
2006-11-20 16:58:41 +00:00
Yang Tse
7a557e984a
Revert runtests.pl back to revision 1.212
...
This is done to back out changes done from revisions 1.213 to 1.217
2006-11-20 16:58:04 +00:00
Yang Tse
f1a55cbe6d
Revert ftp.pm back to revision 1.5 Adding copyright notice.
...
This is done to back out changes done from revisions 1.6 to 1.10
2006-11-20 16:57:01 +00:00
Yang Tse
1e35d95df8
Add some message logging
2006-11-20 10:35:25 +00:00
Yang Tse
d8387b418d
stop slaves before stopping servers
2006-11-20 06:22:51 +00:00
Yang Tse
adea16a294
Revert to KILL test servers until all test servers
...
have proper TERM and INT signal handlers implemented.
2006-11-20 03:25:17 +00:00
Daniel Stenberg
7f2d5cab2d
log the sleep, like when done in test 190
2006-11-19 22:48:40 +00:00
Yang Tse
8db353e1d7
Avoid passing child pid and test server pid, using the running
...
servers hash, and adjust message arguments accordingly.
2006-11-19 03:47:56 +00:00
Yang Tse
e6978117a7
Comment out the use of the "warnings" module now that ftp.pm seems to
...
be clear of warnings. Uncomment it if this module is further modified.
The "warnings" module requires perl 5.006 or later. Previous perl
versions don't have it and die on missing modules.
2006-11-19 03:47:11 +00:00
Yang Tse
0b5e1a9b2f
Avoid keeping dupe pids When forked pid and test server pid is the same one.
2006-11-18 04:07:01 +00:00
Yang Tse
2e17a97474
Fix warning "Use of uninitialized value in ...".
...
If the list has only one item avoid sort subroutine.
2006-11-18 04:05:42 +00:00
Yang Tse
74ddbd8a3b
The hash of running servers is now a hash of hashes which for each running
...
server holds not only its two main pids, but also the pidfile of the test
server and the 'slavepidfiles' for ftp* servers. This allows a better control
when stopping servers.
Now from runtests.pl when test servers are stopped they are signalled in
sequence TERM, INT and KILL allowing time in between for them to die. This
will give us a chance of gracefully stopping test servers, which we didn't
have when we were killing them in first instance.
2006-11-17 16:44:22 +00:00
Daniel Stenberg
e264f699d4
Tor Arntsen spotted this mistake
2006-11-13 13:48:55 +00:00
Yang Tse
17d4f9513e
Remove showing stderr log files unconditionally for tests 518 and 537.
...
Add failure checking for servers when fork()ed.
Use same code path in 'stopserver' when called with a single or multiple pids.
2006-11-09 13:20:42 +00:00
Yang Tse
318a7584f3
add a couple more of debugging messages
2006-11-03 14:13:25 +00:00
Yang Tse
78081a1652
reduce max size of dinamically allocated arrays to minimize the nasty
...
behaviour some versions of IRIX exhibit of committing suicide on big
mallocs instead of just returning a friendly null pointer
2006-11-03 10:05:21 +00:00
Yang Tse
1dee2cd55e
fix comments and renumber rlimit return codes
...
fix closing of fd's when limit is reached
2006-11-03 01:57:25 +00:00
Yang Tse
426ecfd136
fix comments and renumber rlimit return codes
2006-11-03 01:56:55 +00:00
Yang Tse
7f1870da5f
remove leftover comment
2006-11-02 20:56:40 +00:00
Yang Tse
2149a095f7
update and split test cases 518 and 537 into its own source code file
2006-11-02 20:50:18 +00:00
Yang Tse
e8d21adbaa
code cleanup
2006-11-02 15:47:24 +00:00
Yang Tse
fa28531322
use our internal string functions and replace sprintf with snprintf
2006-11-02 03:45:07 +00:00
Yang Tse
deef85ca9a
Update protocol verification end of lines
2006-11-02 01:21:28 +00:00
Yang Tse
4f4427ff41
check symbol HAVE_UNISTD_H instead of UNISTD_H to include unistd.h
2006-11-02 00:34:21 +00:00
Yang Tse
905ca77c9e
test 518 is all about testing libcurl functionality
...
when more than FD_SETSIZE file descriptors are open.
This means that if for any reason we are not able to
open more than FD_SETSIZE file descriptors then test
518 should not be run.
test 537 is all about testing libcurl functionality
when the system has nearly exhausted the number of
free file descriptors. Test 537 will try to run with
very few free file descriptors.
2006-11-01 18:33:50 +00:00
Yang Tse
f51c567de3
Show stderr log file for test 518 unconditionally.
...
In this way we'll be able to sort out problems that might
arise in the prechek phase of the 518 test.
Once that 518 has been verified this change will be undone.
2006-10-31 01:30:42 +00:00
Yang Tse
9b2acca63e
Sync comment with code and add three messages more
2006-10-31 01:24:03 +00:00
Yang Tse
afcd9f1b1c
Address some pitfalls in the rlimit() function check that were
...
preventing execution of this test on many platforms
2006-10-30 17:24:31 +00:00
Yang Tse
609044aea2
Compiler warning fix
2006-10-29 21:19:23 +00:00
Daniel Stenberg
5aa0db8681
a small unification of the error text on failed server startups
2006-10-27 21:07:08 +00:00
Yang Tse
772a985dc3
Update copyright year, since the file has been modified
2006-10-27 03:47:57 +00:00
Yang Tse
32ad212ac9
30 seconds isn't long enough for this test on a loaded server.
2006-10-27 01:58:59 +00:00
Gisle Vanem
125830ab4b
Use proper 'stat' structure for fstat(). I.e. 'struct _stati64' and '_fstati64()'
...
on Win32.
2006-10-26 14:30:11 +00:00
Yang Tse
5b75b423e6
Improved rlimit logic:
...
- Take in account RLIM_INFINITY.
- Verify that soft limit is actually changed when doing so.
- Show errno in case getrlimit or setrlimit fails.
- Keep file descriptors open only while runing this test.
2006-10-26 13:55:24 +00:00
Yang Tse
cd3029f36f
30 seconds isn't long enough for this test on a loaded server.
2006-10-26 09:50:21 +00:00
Daniel Stenberg
cde5e35d9b
Fixed CURLOPT_FAILONERROR to return CURLE_HTTP_RETURNED_ERROR even for the
...
case when 401 or 407 are returned, *IF* no auth credentials have been given.
The CURLOPT_FAILONERROR option is not possible to make fool-proof for 401
and 407 cases when auth credentials is given, but we've now covered this
somewhat more.
You might get some amounts of headers transferred before this situation is
detected, like for when a "100-continue" is received as a response to a
POST/PUT and a 401 or 407 is received immediately afterwards.
Added test 281 to verify this change.
2006-10-25 20:40:14 +00:00
Yang Tse
b4700f026b
Add project notice and file Id
2006-10-25 09:20:44 +00:00
Yang Tse
d771fa7c48
Compiler warning fix
2006-10-25 08:52:00 +00:00
Yang Tse
384c8f3560
Use curl_global_init() and curl_global_cleanup().
...
Improve cleanup in case of initialization failure.
2006-10-25 05:59:46 +00:00
Yang Tse
c54a4301ee
Abort test if it seems that it would have run forever. This is just to prevent
...
test hanging and actually is an indication that there's a condition that is
not being properly handled at some point in the library.
Remove a pair of braces and adjust indentation appropriately.
2006-10-24 15:51:42 +00:00
Yang Tse
13e60c55a1
Avoid trying to compare more than strlen bytes.
2006-10-23 19:16:19 +00:00
Dan Fandrich
9b8b1a68f0
30 seconds isn't long enough for this test on a loaded server.
2006-10-23 19:15:14 +00:00
Yang Tse
4ec9316155
Replace is*() macros with our own IS*() ones.
2006-10-23 19:14:54 +00:00
Daniel Stenberg
90933ac660
rely on the global LDADD instead of having specific ones for every program
2006-10-21 13:00:51 +00:00
Daniel Stenberg
deb81b2ad4
Nir Soffer made the tests/libtest/Makefile.am use a proper variable for all
...
the single test applications' link and dependences, so that you easier can
override those from the command line when using make.
2006-10-21 11:40:04 +00:00
Daniel Stenberg
4e717cdb30
Armel Asselin separated CA cert verification problems from problems with
...
reading the (local) CA cert file to let users easier pinpoint the actual
problem. CURLE_SSL_CACERT_BADFILE (77) is the new libcurl error code.
2006-10-21 11:32:05 +00:00
Yang Tse
33acd6f041
Compiler warning fix
2006-10-21 10:54:41 +00:00
Yang Tse
d997ff6aa8
Oops! Actually set the limit to 30 seconds.
2006-10-20 15:45:12 +00:00
Yang Tse
b9ccecf86e
Decrease the posibility of aborting a test which actually is not
...
stale by replacing loop counters with timeouts. In this way the
main loop of the test will be allowed to run up to 30 seconds on
any platform before aborting it.
2006-10-20 15:39:54 +00:00
Yang Tse
19e07771d1
Set loop2 counter limit to 60 on this test to avoid a false positive.
2006-10-19 23:35:52 +00:00
Yang Tse
ef267ab449
Replace tabs with spaces and Compiler warning fix.
2006-10-19 22:49:33 +00:00
Yang Tse
4f6ed683e8
Compiler warning fix
2006-10-19 22:48:33 +00:00
Yang Tse
c818e7064f
When aborting, show loop counter values when more than one counter exists.
2006-10-19 21:12:27 +00:00
Yang Tse
ead6ab2ef7
Abort test if it seems that it would have run forever. This is just to prevent
...
test hanging and actually is an indication that there's a condition that is
not being properly handled at some point in the library.
Loop counter limits might need to be further increased on false positives.
2006-10-19 17:29:25 +00:00
Yang Tse
5df4be1165
Check for USE_WINSOCK instead of WIN32 where the check was done
...
to verify winsock API availability.
2006-10-18 21:05:40 +00:00
Daniel Stenberg
b61fbbde46
buildconf already runs ares/buildconf by itself if there is an ares subdir
...
present, so there's no use to doing it again in this script!
2006-10-17 11:46:42 +00:00
Yang Tse
e150150d9f
Remove redundant __CYGWIN__ symbol check
2006-10-11 16:01:16 +00:00
Yang Tse
943f0733bb
Compiler warning fix
2006-10-10 23:58:02 +00:00
Yang Tse
8274447dd9
Call curl_global_cleanup() in all code paths before exiting test
2006-10-10 23:50:37 +00:00
Daniel Stenberg
cbcdd337aa
Added test case 536 in an attempt to add Bogdan Nicula's problematic case
...
with multi interface and pipelining. This test just works and did not repeat
the problem his test code showed, but could still serve as a useful test.
2006-10-09 21:29:53 +00:00
Daniel Stenberg
c144adf77c
used for test 535 too
2006-10-09 21:26:09 +00:00
Yang Tse
15e3dfe1d3
Compiler warning fix
2006-10-09 11:21:40 +00:00
Daniel Stenberg
a1de9367ec
Bogdan Nicula's second test case (posted Sun, 08 Oct 2006) converted to test
...
case 535 and it now runs fine. Again a problem with the pipelining code not
taking all possible (error) conditions into account.
2006-10-09 06:58:05 +00:00
Daniel Stenberg
2ad7fcbc2f
test 534 added in an attempt to repeat Bogdan Nicula's bug...
2006-10-08 10:51:53 +00:00
Daniel Stenberg
2c62dfd124
modified lib533 to accept both URLs on the command line
2006-10-08 08:50:12 +00:00
Daniel Stenberg
ef66497a0d
Fix a "sockfilt" leak. When a new 'data' connection sockfilt server is started,
...
make sure that a previously used one is killed first (since they re-use the
same .pid file etc)
2006-10-08 08:43:32 +00:00
Daniel Stenberg
befc30bc55
Bogdan Nicula's hanging test case was converted to test case 533 and the test
...
now runs fine.
2006-10-06 21:19:57 +00:00
Daniel Stenberg
ca5846cde9
catch silly mistakes better
2006-10-06 21:19:40 +00:00
Daniel Stenberg
552b963e6d
Dmitriy Sergeyev provided an example source code that crashed CVS libcurl
...
but that worked nicely in 7.15.5. I converted it into test case 532 and
fixed the problem.
2006-10-04 21:11:08 +00:00
Daniel Stenberg
5e0d9aea32
Support for FTP third party transfers is now dropped
2006-09-30 20:31:11 +00:00
Daniel Stenberg
ae13c93b7d
Reported in #1561470 ( http://curl.haxx.se/bug/view.cgi?id=1561470 ), libcurl
...
would crash if a bad function sequence was used when shutting down after
using the multi interface (i.e using easy_cleanup after multi_cleanup) so
precautions have been added to make sure it doesn't any more - test case 529
was added to verify.
2006-09-28 21:26:06 +00:00
Daniel Stenberg
68e9f75708
As reported in bug: #1566077 the former URL mentioned in the generated cookie
...
jar has died and we now instead point out our own version of that
2006-09-27 21:00:45 +00:00
Daniel Stenberg
f1d707705e
allow user in passwd state for test 280 to work (--ftp-alternative-to-user)
2006-09-24 10:30:02 +00:00
Daniel Stenberg
0992e391ba
filled in some docs for the FTP server control commands
2006-09-23 20:39:34 +00:00
Daniel Stenberg
b22aaeef6a
added simple test of --ftp-alternative-to-user
2006-09-23 20:39:15 +00:00
Daniel Stenberg
e7d90e08b9
Added test case 531 in an attempt to repeat bug report #1561470
...
(http://curl.haxx.se/bug/view.cgi?id=1561470 ) that is said to crash when an
FTP upload fails with the multi interface. It did not, but I made a failed
upload still assume the control connection to be fine.
2006-09-21 20:52:20 +00:00
Daniel Stenberg
ec4a16f2e0
Armel Asselin fixed problems when you gave a proxy URL with user name and
...
empty password or no password at all. Test case 278 and 279 were added to
verify.
2006-09-20 21:49:41 +00:00
Gisle Vanem
56bf97ffc9
'in6addr_any' must be placed in .c-file. Added 'REAL_WIN32' for
...
all Win32 targets except CygWin. Cleanup.
2006-09-13 13:41:53 +00:00
Daniel Stenberg
e55d4fd5c1
nicer reporting of disabled tests
2006-09-13 10:48:03 +00:00
Daniel Stenberg
5ee231415f
added CVS id and clarified the comment lines
2006-09-13 10:18:01 +00:00
Daniel Stenberg
c866771cd2
Added a generic way to disable test cases when "all" is run, and added the
...
FTP 3rd party transfers to that file for now until I have them sorted out.
2006-09-13 10:16:36 +00:00
Yang Tse
5a6c89661a
Cygwin preprocessor adjustments
2006-09-12 01:17:16 +00:00
Daniel Stenberg
29dc39fce1
- Fixed my breakage from earlier today so that doing curl_easy_cleanup() on a
...
handle that is part of a multi handle first removes the handle from the
stack.
- Added CURLOPT_SSL_SESSIONID_CACHE and --no-sessionid to disable SSL
session-ID re-use on demand since there obviously are broken servers out
there that misbehave with session-IDs used.
2006-09-11 17:18:18 +00:00
Gisle Vanem
e134a40208
Added select_test() function to allow selecting on no sockets on
...
Winsock.
2006-09-10 19:01:04 +00:00
Gisle Vanem
145084b699
Print usage in case 'arg2 == NULL'.
2006-09-09 16:55:21 +00:00
Daniel Stenberg
e9160a31e0
removed the comment that isn't valid for this file, just a copy'n paste error
2006-09-08 12:03:55 +00:00
Daniel Stenberg
e3c15fc4b9
test 530 is the first ever HTTP pipelining test for libcurl
2006-09-08 11:56:56 +00:00
Daniel Stenberg
b7eeb6e67f
Major overhaul introducing http pipelining support and shared connection
...
cache within the multi handle.
2006-09-07 21:49:20 +00:00
Daniel Stenberg
a932803eac
Invoke memanalyze from the source path and hush up about killing the FTP
...
server as part of test cases
2006-09-06 10:03:34 +00:00
Daniel Stenberg
dc9f154823
added missing test
2006-08-31 22:18:08 +00:00
Dan Fandrich
cd6c58216a
Use /usr/bin/env to invoke perl like the other test scripts.
2006-08-23 21:20:00 +00:00
Daniel Stenberg
cfdcae4bc7
Based on a patch by Armel Asselin, the FTP code no longer re-issues the TYPE
...
command on subsequent requests on a re-used connection unless it has to.
2006-08-19 21:18:36 +00:00
Daniel Stenberg
490cccba3c
Andrew Biggs pointed out a "Expect: 100-continue" flaw where libcurl didn't
...
send the whole request at once, even though the Expect: header was disabled
by the application. An effect of this change is also that small (< 1024
bytes) POSTs are now always sent without Expect: header since we deem it
more costly to bother about that than the risk that we send the data in
vain.
2006-08-18 22:54:57 +00:00
Yang Tse
ee3514ccdc
Replace exit() with return() in main()
2006-08-14 17:00:08 +00:00
Yang Tse
b33f47804d
Allow again proper compilation outside of the source tree
2006-08-07 18:06:37 +00:00
Yang Tse
aa791ee5cf
Fix compiler warnings.
2006-07-29 09:15:03 +00:00
Yang Tse
2c81bfead5
Replace send() and recv() with swrite() and sread() macros.
2006-07-28 18:01:23 +00:00
Daniel Stenberg
c10d15aa0f
test case 277 - HTTP RFC1867-type formposting with custom Content-Type
2006-07-27 22:44:56 +00:00
Yang Tse
ab4256d53a
Abort if unable to write pid file, and close socket when aborting.
2006-07-19 15:28:30 +00:00
Yang Tse
46c5e562bf
Abort if unable to write pid file.
2006-07-19 15:26:28 +00:00
Yang Tse
42f5a90d09
-Use curl_socket_t instead of int.
...
-Log errno in message if setsockopt() fails.
-Close listener socket on major errors.
2006-07-17 22:44:40 +00:00
Yang Tse
431c4bd6e3
tests/libtest/lib506.c version 1.11 is now also logging CURLSHOPT_LOCKFUNC, CURLSHOPT_UNLOCKFUNC and CURLSHOPT_USERDATA, so we now also have to check them here.
2006-07-17 16:47:07 +00:00
Yang Tse
773bec5ae5
Fix compiler warning "enumerated type mixed with another type"
2006-07-17 14:32:19 +00:00
Yang Tse
2aa4710745
Minor cleanup
2006-07-17 03:38:13 +00:00
Yang Tse
ccfce89423
Null terminate string in buffer before feeding it to strtol()
2006-07-14 06:31:41 +00:00
Yang Tse
498aad8587
Change to meaningful var names and take care of a compiler warning on IRIX 6.5.22 MIPSPro C 7.3 64bit
2006-07-13 18:50:51 +00:00
Yang Tse
f0694c582e
Remove var not used.
2006-07-12 10:41:07 +00:00
Yang Tse
f90f0c98d9
Log a message if not all data is sent.
2006-07-12 09:39:35 +00:00
Yang Tse
95aecc5dbb
Fix compiler warning: comparison between signed and unsigned
2006-07-12 09:03:48 +00:00
Yang Tse
8272874704
Place parenthesis surrounding macro parameters so that the use of sread and swrite is more intuitive.
2006-07-12 06:52:40 +00:00
Yang Tse
86f4cead16
sread now returns ssize_t
2006-07-12 06:14:49 +00:00
Yang Tse
88a1a10e6f
Pay attention when typecasting an operation
2006-07-12 06:09:53 +00:00
Yang Tse
624e657210
sread now returns ssize_t
2006-07-12 05:54:06 +00:00
Yang Tse
58176d1484
Use platform's native types for recv() and send() arguments.
2006-07-12 05:19:00 +00:00
Daniel Stenberg
28611704d9
Ates Goral pointed out that libcurl's cookie parser did case insensitive
...
string comparisons on the path which is incorrect and provided a patch that
fixes this. I edited test case 8 to include details that test for this.
2006-07-08 18:52:08 +00:00
Gisle Vanem
cc5174a89a
Fix "'x' might be used uninitialized in this function" warnings.
2006-06-10 17:35:28 +00:00
Daniel Stenberg
7929600798
stricter type use to please compilers
2006-06-09 08:25:16 +00:00
Daniel Stenberg
6a03ab3ad4
lib525.c does a FTP upload with PORT using multi interface
2006-06-08 22:43:21 +00:00
Daniel Stenberg
2bd3033f68
NTLM2 session response support
2006-06-07 14:14:04 +00:00
Daniel Stenberg
edb5444fa3
reverted the previous .libs check for libs, but instead make mingw32 builds
...
more similar to other configure builds (== use .la for libext and no binext)
2006-05-27 11:36:05 +00:00
Daniel Stenberg
3718737091
better check for libs created in the .libs directory since libtool does this
...
kind of magic
2006-05-25 11:04:08 +00:00
Daniel Stenberg
f689d06ca9
make sure we pass a time_t * to localtime(), and the timeval struct members
...
are not always time_t ones
2006-05-24 21:39:52 +00:00
Daniel Stenberg
4a8dfb3461
based on Tor Arntsen's fix, this should correct test case 271 to again run
...
fine
2006-05-24 15:22:03 +00:00
Daniel Stenberg
973ed24dc8
1 - allow much longer time for the test FTP server to startup and get verified
...
2 - store the time it took to verify it and allow that time to be used as
%FTPTIME[23] in command lines to allow us to adjust better to slow hosts
since test 190 failed on my slow solaris machine just because it hadn't
gotten time to run all the way the test assumed all machines would reach
before the time-out elapsed.
2006-05-11 06:34:30 +00:00
Daniel Stenberg
975534370f
My Solaris test server was simply too slow to be able to respond within 4
...
seconds even when everything is fine! Now we allow a test server 8 seconds
to respond to still be considered ok.
2006-05-10 21:38:46 +00:00
Daniel Stenberg
00312e95fe
removed variable declarations shadowing previously declared variables
2006-05-10 09:53:52 +00:00
Daniel Stenberg
95152aec68
David McCreedy brought line end conversions when doing FTP ASCII
...
transfers. They are done on non-windows systems and translate CRLF to LF.
2006-04-26 07:40:37 +00:00
Daniel Stenberg
e5babd086d
if configure found a fork(), sws supports --fork which is *NOT* used by the
...
ordinary test suite. Also removed the perror() calls and instead made the
logging output the errno code to ease error tracking using logs.
2006-04-10 13:11:52 +00:00
Daniel Stenberg
c212ebbdda
output the exit code from stunnel to stderr in case it is non-zero
2006-04-10 13:10:25 +00:00
Daniel Stenberg
83b8de3d43
support --fork and pass that on to sws
2006-04-10 13:09:56 +00:00
Daniel Stenberg
e174d374f2
Scan for 'stunnel4' before 'stunnel' since debian have them setup this way
...
and it should break most other systems. The "funny" part is that debian
actually have a 'stunnel' setup to simulate stunnel v3 but it breaks our own
stunnel-version-detect-and-adjust-to-it system.
Added initial support for optionally running servers with fork support.
2006-04-10 13:03:20 +00:00
Daniel Stenberg
4edb93508d
Use correct content-length. Found out by patching the libcurl read to only
...
read one byte at a time...
2006-04-10 12:26:08 +00:00
Daniel Stenberg
b0adcd6a46
cut off a bit more of the type-2 ntlm message since it differs between
...
hosts
2006-04-05 12:46:03 +00:00
Daniel Stenberg
be285cde3f
Michele Bini modified the NTLM code to work for his "weird IIS case"
...
(http://curl.haxx.se/mail/lib-2006-02/0154.html ) by adding the NTLM hash
function in addition to the LM one and making some other adjustments in the
order the different parts of the data block are sent in the Type-2 reply.
Inspiration for this work was taken from the Firefox NTLM implementation.
I edited the existing 21(!) NTLM test cases to run fine with these news. Due
to the fact that we now properly include the host name in the Type-2 message
the test cases now only compare parts of that chunk.
2006-04-05 12:35:48 +00:00
Daniel Stenberg
bcc62cc9e3
#1451929 ( http://curl.haxx.se/bug/view.cgi?id=1451929 ) detailed a bug that
...
occurred when asking libcurl to follow HTTP redirects and the original URL had
more than one question mark (?). Added test case 276 to verify.
2006-03-28 08:03:25 +00:00
Daniel Stenberg
33df856925
If run on a curl built shared, detect this and invoke libtool for gdb
...
accordingly.
2006-03-03 14:37:44 +00:00
Daniel Stenberg
ce09cedd2e
added test524
2006-03-03 13:12:39 +00:00
Daniel Stenberg
7d68101f83
Prevent uploading to a URL that has no file name part.
2006-03-03 13:09:30 +00:00
Gisle Vanem
f592ea6c30
Fix typo.
2006-02-25 18:57:20 +00:00
Dan Fandrich
d29147565c
Fixed test case 57 (KNOWN_BUG #18 )
2006-02-22 23:55:28 +00:00
Daniel Stenberg
10beb36b1c
Ulf Hrnhammar fixed a format string (printf style) problem in the Negotiate
...
code. It should however not be the cause of any troubles. He also fixed a
few similar problems in the HTTP test server code.
2006-02-18 22:27:01 +00:00
Daniel Stenberg
e96445bd02
how silly, the cookie expired! ;-)
2006-02-06 20:02:14 +00:00
Daniel Stenberg
67bf4f28ff
Michal Marek provided a patch for FTP that makes libcurl continue to try PASV
...
even after EPSV returned a positive response code, if libcurl failed to
connect to the port number the EPSV response said. Obviously some people are
going through protocol-sensitive firewalls (or similar) that don't understand
EPSV and then they don't allow the second connection unless PASV was
used. This also called for a minor fix of test case 238.
2006-01-24 14:40:43 +00:00
Daniel Stenberg
fcfd6d9504
Duane Cathey was one of our friends who reported that curl -P [IP]
...
(CURLOPT_FTPPORT) didn't work for ipv6-enabed curls if the IP wasn't a
"native" IP while it works fine for ipv6-disabled builds!
In the process of fixing this, I removed the support for LPRT since I can't
think of many reasons to keep doing it and asking on the mailing list didn't
reveal anyone else that could either. The code that sends EPRT and PORT is
now also a lot simpler than before (IMHO).
2006-01-19 23:52:03 +00:00
Daniel Stenberg
67a83c1b34
David Shaw finally removed all traces of Gopher and we are now officially
...
not supporting it. It hasn't been functioning for years anyway, so this is
just finally stating what already was true. And a cleanup at the same time.
2006-01-16 22:14:37 +00:00
Daniel Stenberg
bebf70667d
Andrew Benham fixed a race condition in the test suite that could cause the
...
test script to kill all processes in the current process group!
2006-01-13 12:16:16 +00:00
Daniel Stenberg
bda1e9aeab
Made the copyright year match the latest modification's year.
2006-01-09 13:17:14 +00:00
Daniel Stenberg
8a0ca3066e
modified output to prevent the autobuild system to trap on the 'FAILED' output
...
mistaking it for an actual failed test case
2006-01-04 23:02:40 +00:00
Daniel Stenberg
81b9793807
Added remake of the arpa/tftp.h file to make the TFTP server build on systems
...
without the real header file.
2006-01-03 22:47:07 +00:00
Daniel Stenberg
7278f17e8f
killed trailing whitespace
2006-01-03 22:44:58 +00:00
Daniel Stenberg
66c7427df0
Andres Garcia made the TFTP test server build with mingw ("I also had to copy
...
the 'tftp.h' file from a linux box, since it doesn't come with mingw.")
2006-01-03 22:19:15 +00:00
Daniel Stenberg
687cf0235e
modified to hush compiler warnings
2006-01-03 12:18:22 +00:00
Daniel Stenberg
74a299fd08
1. sws now supports two new "commands" and 2. if built with
...
CURL_SWS_FORK_ENABLED defined it forks for each new connection and thus can
support any amount of connection clients (used for hiper tests and not for the
standard plain curl test suite)
2006-01-02 12:19:12 +00:00
Dan Fandrich
178afd81a9
Fixed lcc compiler warnings.
2005-12-19 19:47:14 +00:00
Yang Tse
d6c5d24af3
Cleanup windows header includes. Where aplicable, inclusion of
...
windows.h winsock.h winsock2.h ws2tcpip.h is done in setup.h
2005-12-18 15:36:14 +00:00
Dan Fandrich
6005a461bb
Log CPPFLAGS environment variable along with the others.
2005-12-13 19:07:33 +00:00
Dan Fandrich
e2df946eee
Fixed some compiler warnings on lcc.
2005-12-13 18:54:31 +00:00
Yang Tse
b1fece74e3
Fix compiler warning
2005-12-08 16:43:32 +00:00
Yang Tse
93d59520e4
If unable to get curl's version, log all failure details.
2005-12-08 11:29:47 +00:00
Daniel Stenberg
59b6cb9e91
Yang Tse: fixed compiler warning
2005-12-06 07:47:37 +00:00
Daniel Stenberg
e06afaeb7a
Yang Tse: With last change logging directory needs to be created sooner.
2005-12-06 07:44:18 +00:00
Daniel Stenberg
1d8212e53a
Yang Tse: make runtests.pl more talkative when unable to find out curl's
...
version.
2005-12-05 19:23:56 +00:00
Daniel Stenberg
272231fb09
Another Yang Tse warning cleanup raid!
2005-12-05 14:10:48 +00:00
Daniel Stenberg
a5fcb26ab1
modified to the new error text for range error
2005-11-10 22:22:38 +00:00
Daniel Stenberg
80f2e3f263
test 275 makes a CONNECT through a proxy and then gets two pages from the
...
same server
2005-10-30 23:15:49 +00:00
Daniel Stenberg
966fa848a0
Nis Jorgensen filed bug report #1338648
...
(http://curl.haxx.se/bug/view.cgi?id=1338648 ) which really is more of a
feature request, but anyway. It pointed out that --max-redirs did not allow
it to be set to 0, which then would return an error code on the first
Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS
set to 0, or -1 for infinity. Added test case 274 to verify.
2005-10-27 22:05:38 +00:00
Daniel Stenberg
be9c873a6e
Dave Dribin made libcurl understand and handle cases when the server
...
(wrongly) sends *two* WWW-Authenticate headers for Digest. While this should
never happen in a sane world, libcurl previously got into an infinite loop
when this occurred. Dave added test 273 to verify this.
2005-10-20 20:07:32 +00:00
Daniel Stenberg
68917eb517
added test case 272 for -z download over FTP when the timestamp is identical
...
to the remote one
2005-10-05 06:23:45 +00:00
Daniel Stenberg
4ec55a964d
fixed the proper path to the tftpd server
2005-09-30 14:25:50 +00:00
Daniel Stenberg
da3992d2e9
added test 271
2005-09-19 22:04:14 +00:00
Daniel Stenberg
48908e4633
test 271, the first ever TFTP test
2005-09-19 22:04:06 +00:00
Daniel Stenberg
f5ae149338
seems to work for test 271 on Linux now!
2005-09-19 22:03:16 +00:00
Daniel Stenberg
90559bed53
renamed sendfile() since some systems have a system call named like this -
...
now the functions are named sendtftp() and recvtftp() instead.
2005-09-16 10:52:38 +00:00
Daniel Stenberg
973a18cf03
In the Solaris 7 header files for tftp, the th_stuff struct member is an
...
unsigned short. Trying a typecast here to fix.
2005-09-16 10:50:43 +00:00
Daniel Stenberg
3c666ce57a
prevent warnings on re-defining MIN
2005-09-16 07:19:54 +00:00
Daniel Stenberg
da3ecc91f8
use int "subscripts" to prevent warnings from picky compilers
2005-09-16 06:14:30 +00:00
Daniel Stenberg
09c8f558f7
use internal *printf() clones
2005-09-16 05:49:53 +00:00
Daniel Stenberg
528a149def
ifdef for includes, added checking for two not previously checked files (one
...
being necessary for solaris builds)
2005-09-15 21:50:50 +00:00
Daniel Stenberg
29e36afb6b
use make -k when running the tests
2005-09-15 21:49:26 +00:00
Daniel Stenberg
0e39543d35
ignore this too
2005-09-15 20:36:58 +00:00
Daniel Stenberg
0de20d8ee6
build tftpd too!
2005-09-15 20:36:28 +00:00
Daniel Stenberg
cd5de5c0e5
First version of the TFTP server. Basic functionality is there.
2005-09-15 20:32:59 +00:00
Daniel Stenberg
bd5afc26bd
added TFTP and TFTP-ipv6 support
2005-09-15 20:25:02 +00:00
Daniel Stenberg
9542dfdcdc
moved test2file() to util.c
2005-09-15 20:22:43 +00:00
Daniel Stenberg
b9c8de598b
Thanks to Scott Davis' detailed reports, I found this premature detection
...
of the end of a chunked-encoded POST request.
2005-09-07 10:51:37 +00:00
Daniel Stenberg
7e845e7cfd
Added FTP_SKIP_PASV_IP and --ftp-skip-pasv-ip
2005-09-04 05:16:06 +00:00
Gunter Knauf
75dbb3189a
quick hack to make it working again on Win32 - however we should consider to set some defaults depending on the compiler architecture we guess we are since it doesnt work well if we prefer building the msvc makefile with gmake instead of nmake because we found gmake first in path....
2005-08-30 18:37:08 +00:00
Daniel Stenberg
a4773fcbbb
Toby Peterson added CURLOPT_IGNORE_CONTENT_LENGTH to the library, accessible
...
from the command line tool with --ignore-content-length. This will make it
easier to download files from Apache 1.x (and similar) servers that are
still having problems serving files larger than 2 or 4 GB. When this option
is enabled, curl will simply have to wait for the server to close the
connection to signal end of transfer. I wrote test case 269 that runs a
simple test that this works.
2005-08-24 10:57:28 +00:00
Daniel Stenberg
1e038c4bc6
valgrind version 3 renames the --logfile command line option to --log-file...
2005-08-24 10:49:57 +00:00
Daniel Stenberg
e22ac39da4
detabify
2005-08-18 08:47:56 +00:00
Daniel Stenberg
9ad92b3007
added test 268 that makes curl -d @nonexisting
2005-08-12 22:09:21 +00:00
Daniel Stenberg
c0d343d56d
do a POST with NTLM and add two custom headers
2005-08-11 21:33:40 +00:00
Gunter Knauf
f451bb7c49
fix for NetWare crossbuilds to display the right config.h when build on Win32.
2005-08-11 18:02:09 +00:00
Daniel Stenberg
6508d446e1
Support realloc() on a NULL pointer properly (printf(%p) on a NULL pointer
...
outputs (nil) and not a 0x0 or similar.
2005-08-04 23:05:36 +00:00
Gisle Vanem
34a827bbfe
Needs 'struct_stat'. Increased verbosity.
2005-07-28 13:20:27 +00:00
Daniel Stenberg
465e19dbe9
Adrian Schuur added trailer support in the chunked encoding stream. The
...
trailer is then sent to the normal header callback/stream.
2005-07-12 18:15:34 +00:00
Daniel Stenberg
20005a83d2
Andrew Bushnell provided enough info for me to tell that we badly needed to
...
fix the CONNECT authentication code with multi-pass auth methods (such as
NTLM) as it didn't previously properly ignore response-bodies - in fact it
stopped reading after all response headers had been received. This could
lead to libcurl sending the next request and reading the body from the first
request as response to the second request. (I also renamed the function,
which wasn't strictly necessary but...)
The best fix would to once and for all make the CONNECT code use the
ordinary request sending/receiving code, treating it as any ordinary request
instead of the special-purpose function we have now. It should make it
better for multi-interface too. And possibly lead to less code...
Added test case 265 for this. It doesn't work as a _really_ good test case
since the test proxy is too stupid, but the test case helps when running the
debugger to verify.
2005-07-03 22:25:15 +00:00
Daniel Stenberg
27926030f9
add more info when this script gets confused, and added getaddrinfo and
...
freeaddrinfo to the trace output
2005-06-30 14:07:52 +00:00
Daniel Stenberg
30c93d66eb
verify that the URL decoding is done properly too
2005-06-22 22:24:47 +00:00
Daniel Stenberg
3b60bb7259
David Shaw's fix that unifies proxy string treatment so that a proxy given
...
with CURLOPT_PROXY can use a http:// prefix and user + password. The user
and password fields are now also URL decoded properly.
Test case 264 added to verify.
2005-06-22 22:24:10 +00:00
Daniel Stenberg
29aafb9cea
Andres Garcia's text mode fix for the 'data' part
2005-06-03 14:06:03 +00:00
Daniel Stenberg
300b4a9158
Todd Kulesza reported a flaw in the proxy option, since a numerical IPv6
...
address was not possible to use. It is now, but requires it written
RFC2732-style, within brackets - which incidently is how you enter numerical
IPv6 addresses in URLs. Test case 263 added to verify.
2005-05-31 13:03:26 +00:00
Daniel Stenberg
52071f3476
added keywords
2005-05-31 12:57:21 +00:00
Daniel Stenberg
a7846189cd
Eric Cooper reported about a problem with HTTP servers that responds with
...
binary zeroes within the headers. They confused libcurl to do wrong so the
downloaded headers become incomplete. The fix is now verified with test case
262.
2005-05-29 22:30:48 +00:00
Daniel Stenberg
e3a530eb61
Andrs Garca fixed a warning appearing on windows
2005-05-27 11:01:41 +00:00
Daniel Stenberg
50e9522a06
silense a warning
2005-05-25 22:12:57 +00:00
Daniel Stenberg
72e532cb67
no more time/re-start of sockfilt, no more redirect of stdin/stdout when
...
talking to sockfilt
2005-05-25 12:27:19 +00:00
Daniel Stenberg
ac5635f77d
added function for individual ftp slave kills
2005-05-25 12:26:38 +00:00
Daniel Stenberg
640d67c119
modified output logging, fixed the ftpslave killing
2005-05-25 12:26:20 +00:00
Daniel Stenberg
3e79693e3b
utilize the whole usec in the log and don't output to stderr if the logfile
...
can't be opened
2005-05-25 12:04:52 +00:00
Daniel Stenberg
d55d3c2fd0
nicer raw logging and put code into (nicer) functions
2005-05-25 12:04:24 +00:00
Daniel Stenberg
3aced17c75
don't restart sockfilt after only 5 seconds of inactivity
2005-05-24 21:09:49 +00:00
Daniel Stenberg
6a63c51f7c
Andres Garcia's mode=text patch to make these do fine on Windows
2005-05-24 10:03:13 +00:00
Daniel Stenberg
632cf13767
add test case 261, response code 226 to TYPE
2005-05-24 09:40:58 +00:00
Daniel Stenberg
c654b79c53
added keywords
2005-05-21 22:38:19 +00:00
Daniel Stenberg
bee7b874ea
added -nobuildconf
2005-05-20 11:24:55 +00:00
Daniel Stenberg
9c3fc592f7
keywords added
2005-05-20 11:15:24 +00:00
Daniel Stenberg
4eab7a1ebc
shorter name
2005-05-20 11:15:15 +00:00
Daniel Stenberg
3d985688e4
sum up
2005-05-20 11:14:44 +00:00
Daniel Stenberg
17ea2631cd
Add support for text mode on stdout tests as well, and add the mode=text
...
to the docs.
2005-05-20 10:40:32 +00:00
Daniel Stenberg
b749910e6c
include ctype.h for isdigit()
2005-05-19 09:55:53 +00:00
Daniel Stenberg
6ff092f140
removed duplicate
2005-05-19 07:12:16 +00:00
Daniel Stenberg
4a091bbd8a
Bug report #1204435 identified a problem with malformed URLs like
...
"http://somehost?data " as it added a slash too much in the request ("GET
/?data/"...). Added test case 260 to verify.
2005-05-18 20:01:01 +00:00
Daniel Stenberg
45bce1062a
ignore resolve too
2005-05-18 10:05:38 +00:00
Daniel Stenberg
8cb344bf3c
use less code and prevent compiler warning
2005-05-18 10:01:46 +00:00
Daniel Stenberg
c84839eb91
scan for gmake and make to prefer gmake on systems that have it
2005-05-17 12:07:08 +00:00
Daniel Stenberg
1f878aee69
Made test case 241 precheck that the given name resolves to an ipv6 address,
...
or the test is skipped. Ideally, we should let this test case go over a few
frequently used IPv6 localhost aliases...
2005-05-17 10:27:11 +00:00
Daniel Stenberg
84fd4686e2
Moved more generic functions to util.[ch]
...
Added resolve.c to simply resolve a given host name
2005-05-17 10:22:22 +00:00
Daniel Stenberg
1a31bff9fe
return, not exit, on several places
2005-05-16 07:07:00 +00:00
Daniel Stenberg
5d9fc28fa7
Modified the default HTTP headers used by libcurl:
...
A) Normal non-proxy HTTP:
- no more "Pragma: no-cache" (this only makes sense to proxies)
B) Non-CONNECT HTTP request over proxy:
- "Pragma: no-cache" is used (like before)
- "Proxy-Connection: Keep-alive" (for older style 1.0-proxies)
C) CONNECT HTTP request over proxy:
- "Host: [name]:[port]"
- "Proxy-Connection: Keep-alive"
2005-05-11 09:52:59 +00:00
Daniel Stenberg
315a9c95d5
prevent 64bit warnings
2005-05-10 11:21:57 +00:00
Daniel Stenberg
e010ac9706
allow the ares/config.h display to fail
2005-05-10 11:19:12 +00:00
Daniel Stenberg
b2b66f749a
no need to display src/config.h anymore since it is a duplicate of lib/config.h
...
but we could use having a look at ares/config.h when that is used
2005-05-09 07:45:30 +00:00
Daniel Stenberg
ef5eea689a
Added an active disconnected state, to make the code clearer.
2005-05-07 13:52:07 +00:00
Daniel Stenberg
fd191deb49
removed unnecessary logging to ease REAL debuggin
2005-05-07 08:55:37 +00:00
Daniel Stenberg
2b00ed7ef8
Added two test cases for multipart formpost over a proxy with --anyauth. Our
...
HTTP test server is a bit limited though, as it never responds to the POST
request until all data has been sent (and received)...
2005-05-06 23:22:33 +00:00
Daniel Stenberg
d960ea959d
When a server is clearly running, curl is now invoked to verify that it can
...
download a file from the server before the server is considered fine to use
for the given test case. This should fix the cases where the server can run
but curl cannot work with it.
2005-05-06 23:21:34 +00:00
Daniel Stenberg
c06da7c84a
now add --trace-time by default for curl tests
2005-05-04 21:58:47 +00:00
Daniel Stenberg
cea117b509
removed lots of (now) redundant logging
2005-05-04 21:57:07 +00:00
Daniel Stenberg
6078c938b2
modify a value we are allowed to
2005-05-04 21:51:09 +00:00
Daniel Stenberg
9e95dd4821
improved logging (all FTP protocol data, both ways) to possibly help us realize
...
why sometimes the control connection dies after a RETR has been sent
2005-05-04 21:49:30 +00:00
Daniel Stenberg
7dde3d1825
*MAN* was this hard to track down. Had I just read the docs properly from the
...
start... Anyway, fork() + exec() makes _two_ pids (in perl) that we need to
track and kill after use. Thankyouverymuch.
2005-05-03 23:14:43 +00:00
Daniel Stenberg
a0fe950b75
add more info to the log to ease debugging
2005-05-03 23:13:24 +00:00
Daniel Stenberg
ed9e10f2d8
another <case> converted to sysread
2005-05-02 11:55:17 +00:00
Daniel Stenberg
02ae3c2810
read from the open2 filehandle with sysread, not <handle>
2005-05-02 11:31:15 +00:00
Daniel Stenberg
669ebb5f71
Fixed the FTP server read stuff when waiting for a connect after a PASV/EPSV.
...
Made the ftp server use the passed in pidfile name, and made runtests.pl
pass it in properly.
2005-05-02 10:22:09 +00:00
Daniel Stenberg
9a3e0e52cb
fix the server for the slow response case
2005-05-02 10:03:12 +00:00
Daniel Stenberg
6f4ff1f2bf
When starting the ftp server, wait a few seconds to make really sure that
...
a pidfile for the server appears as otherwise it failed.
2005-05-02 09:08:44 +00:00
Daniel Stenberg
d3eea61f1f
Make sure there's no pidfile if we cannot start the initial sockfilt tool -
...
this happens for some ipv6-enabled hosts on which sockfilt cannot listen
on ipv6.
2005-05-02 09:08:02 +00:00
Daniel Stenberg
e71bd416f4
blank a few more environment variables before running a test
2005-05-02 07:54:25 +00:00
Daniel Stenberg
c4dbed040b
fixed to use fork()+exec() to start test servers
2005-05-01 13:20:53 +00:00
Daniel Stenberg
366b62af2d
always use the libcurl-provided *printf() functions
2005-05-01 12:56:09 +00:00
Daniel Stenberg
a6955aa486
util.h added as "source" to make it get added in dist archives
2005-05-01 12:51:27 +00:00
Daniel Stenberg
ad30341fa2
logfile name is const
2005-04-30 23:35:51 +00:00
Daniel Stenberg
23da55a9f1
Moved common code to util.[ch] instead of having it duplicated in sws.c
...
and sockfilt.c. For good-to-have functions for the servers written in C.
2005-04-30 23:30:55 +00:00
Daniel Stenberg
63621bae81
Set mode text on the section that is written by curl in text mode, to allow
...
the runtests.pl to check this differently on operating systems that
differentiate on this.
2005-04-28 21:07:07 +00:00
Daniel Stenberg
85f9e6c4b9
basic signal handler for sigint and sigkill
2005-04-28 21:06:17 +00:00
Daniel Stenberg
967ec296c0
fixed the attribute parser to better handle multiple ones, with or without
...
quotes around the contents
2005-04-28 21:05:40 +00:00
Daniel Stenberg
c6aae9b1d7
moved two functions to ftp.pm, made some more changes on stopping servers
...
and fixed the textmode attribute thing for windows a bit
2005-04-28 21:04:58 +00:00
Daniel Stenberg
913c370c25
moved in functions from runtests.pl to enable the ftpserver to use the
...
killslaves function
2005-04-28 21:04:08 +00:00
Daniel Stenberg
e5472bbd21
AF_INET6 for ipv6 addresses!
2005-04-28 14:31:25 +00:00
Daniel Stenberg
957c258c6d
no, the kill servers messages need to be verbose, they're too frequent
2005-04-28 14:25:48 +00:00
Daniel Stenberg
abee109cd1
display killed pids to make it easier to see for autobuilds etc
2005-04-28 14:03:08 +00:00
Daniel Stenberg
502e5ae6e1
historic thing we will not use
2005-04-28 13:55:34 +00:00
Daniel Stenberg
b8417be1f2
removed ftpsserver.pl
2005-04-28 13:55:16 +00:00
Daniel Stenberg
9e037431b4
When staring a HTTP server, use the pidfile preferably since it turns out
...
sometimes the server can start but curl cannot speak to it, and then we must
remember the server (in order to kill it properly) anyway.
Also, make sure to kill all servers on exit everywhere.
2005-04-28 13:54:48 +00:00
Daniel Stenberg
f71b3676bb
ignore more generated files
2005-04-28 11:22:18 +00:00
Daniel Stenberg
50fe7b5e35
remove unused ftps-server code and fixed two warnings
2005-04-28 08:23:25 +00:00
Daniel Stenberg
9fb253388b
if diff -u makes zero output, try diff -c instead
2005-04-28 08:20:33 +00:00
Daniel Stenberg
8cf1786296
kill slave processes when they fail
2005-04-28 07:36:55 +00:00
Daniel Stenberg
51b17b299c
1. no longer ask the server for the HTTPS pid, as it returns the HTTP pid
...
(problem identified by Dan F)
2. initial text mode fix for file checks, to allow better text file testing
on windows (with regard to line endings)
3. fixed to use the proper ftpserver pidfile to find pid
2005-04-28 06:50:42 +00:00
Daniel Stenberg
8465a367a4
listen(..., 1) as 0 doesn't work on Tru64!
2005-04-27 12:28:04 +00:00
Daniel Stenberg
3bcfe678ab
display listening port in log
2005-04-27 12:27:23 +00:00
Daniel Stenberg
d5403f3a5b
show what error codes we test for too, and show 10 test case numbers
2005-04-27 10:12:41 +00:00
Daniel Stenberg
26abb48533
keyword update
2005-04-27 09:59:47 +00:00
Daniel Stenberg
177848ed27
detect SSL library properly and display it on startup
2005-04-27 09:59:29 +00:00
Daniel Stenberg
01165e08e0
Fred New reported a bug where we used Basic auth and user name and password in
...
.netrc, and when following a Location: the subsequent requests didn't properly
use the auth as found in the netrc file. Added test case 257 to verify my fix.
2005-04-25 21:39:48 +00:00
Daniel Stenberg
c12159ce21
show up to 5 (random) test cases using the keyword
2005-04-22 22:29:48 +00:00
Daniel Stenberg
4485503ecc
keywords added
2005-04-22 21:59:08 +00:00
Daniel Stenberg
f0057977b7
ignore the memdump file when showing files after a failure
2005-04-22 20:47:35 +00:00
Daniel Stenberg
e8e43f06af
copyright this year
2005-04-22 20:47:21 +00:00
Daniel Stenberg
b8d7a13ea3
modified the test case success reporting, added "test N out of Y" and
...
"remaining: [time]" outputs to hint users about what to expect
2005-04-22 11:51:06 +00:00
Daniel Stenberg
78a76dc905
test 256 is like test 38 but with proxy + proxy auth
2005-04-22 10:15:21 +00:00
Daniel Stenberg
5fa5fff0e9
keywords
2005-04-22 10:06:58 +00:00
Daniel Stenberg
53a8e5655b
added CURLOPT_PORT test when using proxy
2005-04-19 08:10:04 +00:00
Daniel Stenberg
63d109f7be
Olivier reported that even though he used CURLOPT_PORT, libcurl clearly still
...
used the default port. He was right. I fixed the problem and added the test
cases 521, 522 and 523 to verify the fix.
2005-04-18 19:41:04 +00:00
Daniel Stenberg
c904b6b5bf
Toshiyuki Maezawa reported that when doing a POST with a read callback,
...
libcurl didn't properly send an Expect: 100-continue header. It does now.
2005-04-18 17:14:58 +00:00
Daniel Stenberg
4382204e1b
better fix for the socket -1 case
2005-04-18 08:59:46 +00:00
Daniel Stenberg
6d3114efe2
ignore sockfilt
2005-04-18 08:51:04 +00:00
Daniel Stenberg
b62baaed95
safety measure to avoid using -1 as socket
2005-04-18 08:49:46 +00:00
Daniel Stenberg
9b391e531b
allow some more time
2005-04-18 08:49:21 +00:00
Daniel Stenberg
a0c7a6d22b
ARGH my stupidity is endless. Ipv4-only hosts don't send EPRT or LPRT.
2005-04-18 07:56:43 +00:00
Daniel Stenberg
14424f7058
Modified the FTP server to use the new 'sockfilt' program to do all the socket
...
level stuff. The FTP server communicates with sockfilt using perl's open2().
This enables easier IPv6 support and hopefully FTP-SSL support in the future.
Added four test cases for FTP-ipv6.
2005-04-18 06:57:44 +00:00
Daniel Stenberg
6063dff8d0
Modified to not mix ordinary print to STDOUT with a system() that prints to
...
stdout, since I've found cases on Solaris where the second output mixes with
the first and thus the big check-script doesn't properly find the first
string in the output stream.
2005-04-18 05:46:10 +00:00
Daniel Stenberg
53280a196b
keywords added
2005-04-16 23:15:19 +00:00
Daniel Stenberg
0bf9a5704b
minor edits, report the test cases without keywords
2005-04-16 23:15:12 +00:00
Daniel Stenberg
8182d17ae1
starting to produce a summary in HTML
2005-04-16 12:43:32 +00:00
Daniel Stenberg
6c2f583f51
keywords added
2005-04-16 00:00:35 +00:00
Daniel Stenberg
a72eaddda3
initial tool to report info/keywords of the test cases
2005-04-15 23:48:58 +00:00
Daniel Stenberg
dc050e45df
started adding "keywords" for each test, to better allow us to sum up what
...
kind of tests we have and how many tests that test certain features
2005-04-15 23:48:31 +00:00
Daniel Stenberg
2056a538b9
Two new slowdown tests for better testing of the FTP response reader function
...
when the response come in many small chunks.
2005-04-14 22:52:42 +00:00
Daniel Stenberg
cd1144dc24
make the ftp server support reply/servercmd, and make SLOWDOWN work, and
...
update the docs accordingly
2005-04-14 22:52:08 +00:00
Daniel Stenberg
d7b11d4c33
fix port number
2005-04-13 12:37:38 +00:00
Daniel Stenberg
67805b6dc5
requires OpenSSL, as our GnuTLS doesn't provide support for
...
CURLOPT_SSL_CTX_FUNCTION (yet).
2005-04-12 07:19:34 +00:00
Daniel Stenberg
0050ab2a3d
support tests that requires 'OpenSSL' specificly
2005-04-12 07:18:48 +00:00
Daniel Stenberg
fb3c85ab2f
fixed the 304 response-with-content-length problem reported by Cory Nelson
2005-04-08 16:59:13 +00:00
Daniel Stenberg
6a6c0e7a73
test time-conditioned FTP uploads
2005-04-05 21:07:27 +00:00
Daniel Stenberg
74816fed6c
Hardeep Singh reported a problem doing HTTP POST with Digest. (It was actually
...
also affecting NTLM and Negotiate.) It turned out that if the server responded
with 100 Continue before the initial 401 response, libcurl didn't take care of
the response properly. Test case 245 and 246 added to verify this.
2005-04-03 22:46:25 +00:00
Daniel Stenberg
b4c9789d5f
Test 245 was just added in an attempt to repeat Hardeep Singh's recent bug.
...
But this works just fine on my host. Plain HTTP POST using Digest.
2005-04-03 22:18:27 +00:00
Daniel Stenberg
f6b1173437
copyright this year
2005-03-31 14:42:28 +00:00
Daniel Stenberg
346992c366
Attempt to make this code more forgiving for systems that doesn't detect
...
the failed connect "immediately".
2005-03-31 14:10:54 +00:00
Daniel Stenberg
ab4086bc24
Updated the copyright year since changes have been this year.
2005-03-31 07:02:02 +00:00
Daniel Stenberg
677a74fa1b
Made the server send data to the control/data connections using two dedicated
...
functions. This enabled me to add a function that automatically delays between
each byte, to proper test curl's ability to read FTP server responses sent in
many (small) chunks. See also upcoming libcurl fixes...
2005-03-29 09:09:58 +00:00
Daniel Stenberg
8a076d1dba
Based on Augustus Saunders' comments and findings, the HTTP output auth
...
function was fixed to use the proper proxy authentication when multiple ones
were added as accepted. test 239 and test 243 were added to repeat the
problems and verify the fixes.
2005-03-28 22:19:31 +00:00
Daniel Stenberg
31443724c6
modified some log outputs, added comment about auth required as used in
...
test 154
2005-03-28 22:15:17 +00:00
Daniel Stenberg
0e7614919b
can you spell copy and paste error for me loud and clear? ;-P
2005-03-22 19:58:00 +00:00
Daniel Stenberg
2bf72937d2
provide HTML and PDF versions of the man pages in the dist archive
2005-03-22 19:46:49 +00:00
Daniel Stenberg
3e5a32671c
Make NTLM tests depend on the NTLM feature at not SSL, since the NTLM support
...
is no longer only present when built with SSL support.
2005-03-21 08:14:32 +00:00
Daniel Stenberg
d34f32b39e
format mistake
2005-03-21 07:45:18 +00:00
Daniel Stenberg
5b6b6283f3
some additional debug output
2005-03-19 01:00:00 +00:00
Dan Fandrich
987cdebefb
Fixed spelling of --runtestopts
2005-03-18 18:41:50 +00:00
Dan Fandrich
6b978db369
Netware builds don't use configure.
2005-03-18 18:03:38 +00:00
Daniel Stenberg
44f2024bab
adjust to use plain 'make' even for cross-compiles if using configure-
...
style build
2005-03-18 09:21:25 +00:00
Dan Fandrich
5b3730feae
Change the bogus address used in test237 to be more reliable when run
...
on a host with a buggy resolver that strips all but the bottom 8 bits of
each octet. The resolved address in this case (192.0.2.127) is guaranteed
never to belong to a real host (see RFC3330).
2005-03-17 20:50:17 +00:00
Daniel Stenberg
bbba9d568f
added descriptions
2005-03-17 12:16:24 +00:00
Daniel Stenberg
e8ddf84871
don't set TEST_F to blank when --runtestopts isn't used, as that will override
...
the default options set in the Makefile
2005-03-17 09:44:09 +00:00
Daniel Stenberg
67f04d2d5f
support multiple error codes for a test case since some things just vary
...
between platforms
2005-03-17 08:17:48 +00:00
Daniel Stenberg
d26e932858
add new option
2005-03-17 08:04:08 +00:00
Daniel Stenberg
73b9d0840c
add new file
2005-03-17 08:04:00 +00:00
Daniel Stenberg
2ea4326c40
its a start
2005-03-17 08:03:46 +00:00
Dan Fandrich
233237740d
Added the --runtestsopts option to testcurl.pl to override the default
...
options used by runtests.pl during testing (useful for disabling valgrind).
2005-03-17 00:57:17 +00:00
Daniel Stenberg
4a6cc54eb5
check for the HTTPS server in a manner similar to how we check for the HTTP
...
server
2005-03-16 22:02:09 +00:00
Daniel Stenberg
9a5c21c16f
test EPSV and PASV response handling when they get well-formated data back
...
but using illegal values
2005-03-15 12:33:08 +00:00
Daniel Stenberg
06ffb47ef2
initial man page attempt for testcurl.pl
2005-03-15 12:13:37 +00:00
Daniel Stenberg
562d2de303
Added lots of new command line options, made confsuffix get set based on
...
targetos only and not build os. Commented away the line that enables perl
warnings.
2005-03-15 07:35:36 +00:00
Dan Fandrich
677ddd6160
Make nonexistent host names absolute so tests will pass on machines
...
with a wildcard DNS search domain.
2005-03-15 04:04:50 +00:00