CURLOPT_XFERINFOFUNCTION is now the preferred progress callback function
and CURLOPT_PROGRESSFUNCTION is considered deprecated.
This new callback uses pure 'curl_off_t' arguments to pass on full
resolution sizes. It otherwise retains the same characteristics: the
same call rate, the same meanings for the arguments and the return code
is used the same way.
The progressfunc.c example is updated to show how to use the new
callback for newer libcurls while supporting the older one if built with
an older libcurl or even built with a newer libcurl while running with
an older.
Introducing a number of options to the multi interface that
allows for multiple pipelines to the same host, in order to
optimize the balance between the penalty for opening new
connections and the potential pipelining latency.
Two new options for limiting the number of connections:
CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections
to the same host. When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished, so we can reuse the connection.
CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total.
When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished. The free connection will then be reused, if possible, or
closed if the pending handle can't reuse it.
Several new options for pipelining:
CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a
pipeline is "full" when a connection is to be reused, a new connection
will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it.
If not, the handle will be put in a pending state until a connection is
ready (either free or a pipe got shorter).
CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a transfer with a content
length that is larger than this.
CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a chunk larger than this.
CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow
pipelining.
CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow
pipelining.
See the curl_multi_setopt() man page for details.
GCC specific adjustments:
- check __ILP32__ before 32 and 64bit processor architectures in
order to detect ILP32 programming model on 64 bit processors
which, of course, also support LP64 programming model, when using
gcc 4.7 or newer.
- keep 32bit processor architecture checks in order to support gcc
versions older than 4.7 which don't define __ILP32__
- check __LP64__ for gcc 3.3 and newer, while keeping 64bit processor
architecture checks for older versions which don't define __LP64__
The list of unsafe functions currently consists of sprintf, vsprintf,
strcat, strncat and gets.
Subsequently, some existing code needed updating to avoid warnings on
this.
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
AIX sys/poll.h header file defines 'events' and 'revents' as C
preprocessor macros. Usage of these literals in libcurl's external
API was introduced in commit de24d7bd4c causing AIX build failures.
Appropriate inclusion of sys/poll.h by libcurl's external interface
fixes AIX build and usage issues while avoiding a SONAME bump.
/*
* Name: curl_multi_wait()
*
* Desc: Poll on all fds within a CURLM set as well as any
* additional fds passed to the function.
*
* Returns: CURLMcode type, general multi error code.
*/
CURL_EXTERN CURLMcode curl_multi_wait(CURLM *multi_handle,
struct curl_waitfd extra_fds[],
unsigned int extra_nfds,
int timeout_ms);
For active FTP connections, applications may need setting the sockopt after accept() call returns successful. This fix gives a call to the callback registered with CURL_SOCKOPTFUNCTION option. Also a new sock type - CURLSOCKTYPE_ACCEPT - is added. This type is to be passed to application callbacks with - purpose - parameter. Applications may use this parameter to distinguish between socket types.
Added Windows SSPI version information to the curl version string when
SCHANNEL SSL is not enabled, as the version of the library should also
be included when SSPI is used to generate security contexts.
Removed SSPI from the feature list as the features are GSS-Negotiate,
NTLM and SSL depending on the usage of the SSPI library.
Configuration files such as curl_config.h and all config-*.h no longer exist
nor are generated/copied into 'src' directory, now these only exist in 'lib'
directory from where curl tool sources uses them.
Additionally old src/setup.h has been refactored into src/tool_setup.h which
now pulls lib/setup.h
The possibility of a makefile needing an include path adjustment exists.
Added a new CURLOPT_MAIL_AUTH option that allows the calling program to
set the optional AUTH parameter in the MAIL FROM command.
When this option is specified and an authentication mechanism is used
to communicate with the mail server then the AUTH parameter will be
included in the MAIL FROM command. This is particularly useful when the
calling program is acting as a relay in a trusted environment and
performing server to server communication, as it allows the relaying
server to specify the address of the mailbox that was used to
authenticate and send the original email.
Allow an appliction to set libcurl specific SSL options. The first and
only options supported right now is CURLSSLOPT_ALLOW_BEAST.
It will make libcurl to disable any work-arounds the underlying SSL
library may have to address a known security flaw in the SSL3 and TLS1.0
protocol versions.
This is a reaction to us unconditionally removing that behavior after
this security advisory:
http://curl.haxx.se/docs/adv_20120124B.html
... it did however cause a lot of programs to fail because of old
servers not liking this work-around. Now programs can opt to decrease
the security in order to interoperate with old servers better.
This adds three new options to control the behavior of TCP keepalives:
- CURLOPT_TCP_KEEPALIVE: enable/disable probes
- CURLOPT_TCP_KEEPIDLE: idle time before sending first probe
- CURLOPT_TCP_KEEPINTVL: delay between successive probes
While not all operating systems support the TCP_KEEPIDLE and
TCP_KEEPINTVL knobs, the library will still allow these options to be
set by clients, silently ignoring the values.
In commit c834213ad5 we re-used some obsolete error codes, and here are
two defines that makes sure existing source codes that happen to use any
of these deprecated ones will still compile.
As usual, define CURL_NO_OLDIES to avoid getting these "precaution
defines".
1- Two new error codes are introduced.
CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of
FTP server connected.
CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts.
Neither of these errors are considered fatal and control connection
remains OK because it could just be a firewall blocking server to
connect to the client.
2- One new setopt option was introduced.
CURLOPT_ACCEPTTIMEOUT_MS
It sets the maximum amount of time FTP client is going to wait for a
server to connect. Internal default accept timeout is 60 seconds.
When working with the Android Standalone Toolchain the compiler defines
this macro:
/path/to/arm-linux-androideabi-gcc -E -dM - < /dev/null \
| grep -i android
#define __ANDROID__ 1
We really need to check both ANDROID and __ANDROID__ since I've observed
that:
* if you use Android.mk file(s) and the 'ndk-build' script (aka vanilla
way), ANDROID is predefined (see -DANDROID extra C flag),
* if you use the Android Standalone Toolchain, then __ANDROID__ is
predefined as stated by the compiler
There might be situations where a user would want to unset this option.
Avoid forcing him/her to cast the NULL argument to (char *) in order to
get past the compile time typecheck.
Don't even declare the struct members for disabled features
Introducing the CURLSHE_NOT_BUILT_IN return code for the share interface
when trying to set a sharing option that has been disabled (or not
enabled) in the library.
Allow (*curl_write_callback) write callbacks to return
CURL_WRITEFUNC_OUT_OF_MEMORY to properly indicate libcurl of OOM conditions
inside the callback itself.
Allow compilation of libcurl and curl using BSD-style lwIP on Win32.
In order to compile libcurl and curl with this support it is necessary
to edit files lib/config-win32.h and src/config-win32.h and uncomment
a line to make definition of preprocessor symbol USE_LWIPSOCK visible.
Afterwards you can compile as usual.
In order to use compiled library with BSD-style lwIP TCP/IP stack in
your program it is mandatory that you include lwIP header file <lwip/opt.h>
before including <curl/curl.h> or <curl/multi.h>
Compilation has been verified with lwIP 1.4.0 and contrib-1.4.0 from:
http://download.savannah.gnu.org/releases/lwip/lwip-1.4.0.ziphttp://download.savannah.gnu.org/releases/lwip/contrib-1.4.0.zip
Have fun!
Introduced the initial setup to allow closesocket callbacks by making
sure sclose() is only ever called from one place in the libcurl source
and still run all test cases fine.
Made the public headers checksrc compliant
Removed types.h (it's been unused since April 2004)
Made the root makefile do make in include by default as well, so that
TAGS and the checksrc will work better.
Added CURLOPT_TRANSFER_ENCODING as the option to set to request Transfer
Encoding in HTTP requests (if built zlib enabled). I also renamed
CURLOPT_ENCODING to CURLOPT_ACCEPT_ENCODING (while keeping the old name
around) to reduce the confusion when we have to encoding options for
HTTP.
--tr-encoding is now the new command line option for curl to request
this, and thus I updated the test cases accordingly.
Stop the abuse of CURLE_FAILED_INIT as return code for things not being
init related by introducing two new return codes:
CURLE_NOT_BUILT_IN and CURLE_UNKNOWN_OPTION
CURLE_NOT_BUILT_IN replaces return code 4 that has been obsoleted for
several years. It is used for returning error when something is
attempted to be used but the feature/option was not enabled or
explictitly disabled at build-time. Getting this error mostly means that
libcurl needs to be rebuilt.
CURLE_FAILED_INIT is now saved and used strictly for init
failures. Getting this problem means something went seriously wrong,
like a resource shortage or similar.
CURLE_UNKNOWN_OPTION is the option formerly known as
CURLE_UNKNOWN_TELNET_OPTION (and the old name is still present,
separately defined to be removed in a very distant future). This error
code is meant to be used to return when an option is given to libcurl
that isn't known. This problem would mostly indicate a problem in the
program that uses libcurl.
Introducing a few CURL_SOCKOPT* defines for conveniance. The new
CURL_SOCKOPT_ALREADY_CONNECTED signals to libcurl that the socket is to
be treated as already connected and thus it will skip the connect()
call.
On second thought, I think CURLE_TLSAUTH_FAILED should be eliminated. It
was only being raised when an internal error occurred while allocating
or setting the GnuTLS SRP client credentials struct. For TLS
authentication failures, the general CURLE_SSL_CONNECT_ERROR seems
appropriate; its error string already includes "passwords" as a possible
cause. Having a separate TLS auth error code might also cause people to
think that a TLS auth failure means the wrong username or password was
entered, when it could also be a sign of a man-in-the-middle attack.
This is a meta symbol. OR this value together with a single specific
auth value to force libcurl to probe for un-restricted auth and if not,
only that single auth algorithm is acceptable.
For example you can use CURLAUTH_DIGEST|CURLAUTH_ONLY to make libcurl
first probe for what method to use, but yet only consider Digest to be
acceptable.
Using _only_ CURLAUTH_DIGEST without the CURLAUTH_ONLY field, will make
libcurl explicitly use Digest right away and not do any probing.
CURLOPT_RESOLVE is a new option that sends along a curl_slist with
name:port:address sets that will populate the DNS cache with entries so
that request can be "fooled" to use another host than what otherwise
would've been used. Previously we've encouraged the use of Host: for
that when dealing with HTTP, but this new feature has the added bonus
that it allows the name from the URL to be used for TLS SNI and server
certificate name checks as well.
This is a first change. Surely more will follow to make it decent.
I added all OBJECTPOINT curl_easy_setopt() options from 178 to 202. Left
to add: the five FUNCTIONPOINT (callbacks) options added since:
SSH_KEYFUNCTION
INTERLEAVEFUNCTION
CHUNK_BGN_FUNCTION
CHUNK_END_FUNCTION
FNMATCH_FUNCTION
command is a special "hack" used by the drftpd server, but even though it is
a custom extension I've deemed it fine to add to libcurl since this server
seems to survive and people keep using it and want libcurl to support
it. The new libcurl option is named CURLOPT_FTP_USE_PRET, and it is also
usable from the curl tool with --ftp-pret. Using this option on a server
that doesn't support this command will make libcurl fail.
the define CURL_MAX_HTTP_HEADER which is even exposed in the public header
file to allow for users to fairly easy rebuild libcurl with a modified
limit. The rationale for a fixed limit is that libcurl is realloc()ing a
buffer to be able to put a full header into it, so that it can call the
header callback with the entire header, but that also risk getting it into
trouble if a server by mistake or willingly sends a header that is more or
less without an end. The limit is set to 100K.
Fix OS400 makefile for tests to use the new Makefile.inc in libtest
Update the OS400 wrappers and RPG binding according to the current CVS source state
With the curl memory tracking feature decoupled from the debug build feature,
CURLDEBUG and DEBUGBUILD preprocessor symbol definitions are used as follows:
CURLDEBUG used for curl debug memory tracking specific code (--enable-curldebug)
DEBUGBUILD used for debug enabled specific code (--enable-debug)
