Connections that are used for HTTP/1.1 Pipelining or HTTP/2 multiplexing
only get additional transfers added to them if the existing connection
is held by the same multi or easy handle. libcurl does not support doing
HTTP/2 streams in different threads using a shared connection.
Closes#2152
This bit is no longer used. It is not clear what it meant for users to
"init the TLS" in a world with different TLS backends and since the
introduction of multissl, libcurl didn't properly work if inited without
this bit set.
Not a single user responded to the call for users of it:
https://curl.haxx.se/mail/lib-2017-11/0072.html
Reported-by: Evgeny Grin
Assisted-by: Jay Satiro
Fixes#2089Fixes#2083Closes#2107
... so that IPv6 addresses can be passed like they can for connect-to
and how they're used in URLs.
Added test 1324 to verify
Reported-by: Alex Malinovich
Fixes#2087Closes#2091
The --interface command (CURLOPT_INTERFACE option) already uses
SO_BINDTODEVICE on Linux, but it tries to parse it as an interface or IP
address first, which fails in case the user passes a VRF.
Try to use the socket option immediately and parse it as a fallback
instead. Update the documentation to mention this feature, and that it
requires the binary to be ran by root or with CAP_NET_RAW capabilities
for this to work.
Closes#2024
This uses the brotli external library (https://github.com/google/brotli).
Brotli becomes a feature: additional curl_version_info() bit and
structure fields are provided for it and CURLVERSION_NOW bumped.
Tests 314 and 315 check Brotli content unencoding with correct and
erroneous data.
Some tests are updated to accomodate with the now configuration dependent
parameters of the Accept-Encoding header.
This is implemented as an output streaming stack of unencoders, the last
calling the client write procedure.
New test 230 checks this feature.
Bug: https://github.com/curl/curl/pull/2002
Reported-By: Daniel Bankhead
Also upgrade test 1133 to cover this case and clarify man page about
form data quoting.
Bug: https://github.com/curl/curl/issues/2022
Reported-By: omau on github
... that are multiplied by 1000 when stored.
For 32 bit long systems, the max value accepted (2147483 seconds) is >
596 hours which is unlikely to ever be set by a legitimate application -
and previously it didn't work either, it just caused undefined behavior.
Also updated the man pages for these timeout options to mention the
return code.
Closes#1938
If stdin is not a regular file, its content is memory-buffered to enable
a possible data "rewind".
In all cases, stdin data size is determined before real use to avoid
having an unknown part's size.
--libcurl generated code is left as an unbuffered stdin fread/fseek callback
part with unknown data size.
Buffering is not supported in deprecated curl_formadd() API.
... now with a -formadd suffix. While the new mime API is introduced in
7.56.0 we must acknowledge that lots of users can't upgrade their curl
versions immediately.
- Use spaces instead of tabs as the delimiter.
Follow up to 7c52b12 which added the entry. The entry had used tabs but
the symbol-scan parser doesn't recognize tabs and would fail the symbol.
curl_mime_encoder() is operational and documented.
curl tool -F option is extended with ";encoder=".
curl tool --libcurl option generates calls to curl_mime_encoder().
New encoder tests 648 & 649.
Test 1404 extended with an encoder specification.
... since people copy and paste code from this example and thus they get
an inefficient POST operation without a good reason and sometimes
without understanding why.
Instead this now returns as much data as possible.
To support telling a string is nul-terminated, symbol CURL_ZERO_TERMINATED
has been introduced.
Documentation updated accordingly.
symbols in versions updated. Added form API symbols deprecation info.
This feature is badly supported in Windows: as a replacement, a caller has
to use curl_mime_data_cb() with fread, fseek and possibly fclose
callbacks to process opened files.
The cli tool and documentation are updated accordingly.
The feature is however kept internally for form API compatibility, with
the known caveats it always had.
As a side effect, stdin size is not determined by the cli tool even if
possible and this results in a chunked transfer encoding. Test 173 is
updated accordingly.
Additional mime-specific tests.
Existing tests updated to reflect small differences (Expect: 100-continue,
data size change due to empty lines, etc).
Option -F headers= keyword added to tests.
test1135 disabled until the entry point order change is resolved.
New example smtp-mime.
Examples postit2 and multi-post converted from form API to mime API.
./sslbackend.c:58:3: warning: else after closing brace on same line (BRACEELSE)
} else if(isdigit(*name)) {
^
./sslbackend.c:62:3: warning: else after closing brace on same line (BRACEELSE)
} else
^
it is a one time *set*, not necessarily a one time use... it can be
called again if the first call failed or just listed the alternatives.
clarify that the available backends are the ones this build supports
plus add some formatting
Reported-by: Rich Gray
Bug: https://curl.haxx.se/mail/lib-2017-08/0119.html
Let's add a compile time safe API to select an SSL backend. This
function needs to be called *before* curl_global_init(), and can be
called only once.
Side note: we do not explicitly test that it is called before
curl_global_init(), but we do verify that it is not called multiple times
(even implicitly).
If SSL is used before the function was called, it will use whatever the
CURL_SSL_BACKEND environment variable says (or default to the first
available SSL backend), and if a subsequent call to
curl_global_sslset() disagrees with the previous choice, it will fail
with CURLSSLSET_TOO_LATE.
The function also accepts an "avail" parameter to point to a (read-only)
NULL-terminated list of available backends. This comes in real handy if
an application wants to let the user choose between whatever SSL backends
the currently available libcurl has to offer: simply call
curl_global_sslset(-1, NULL, &avail);
which will return CURLSSLSET_UNKNOWN_BACKEND and populate the avail
variable to point to the relevant information to present to the user.
Just like with the HTTP/2 push functions, we have to add the function
declaration of curl_global_sslset() function to the header file
*multi.h* because VMS and OS/400 require a stable order of functions
declared in include/curl/*.h (where the header files are sorted
alphabetically). This looks a bit funny, but it cannot be helped.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The required low-level logic was already available as part of
`libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1]
option.)
This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION`
(boolean) and the new `curl` command-line option `--compressed-ssh`
to request this `libssh2` feature. To have compression enabled, it
is required that the SSH server supports a (zlib) compatible
compression method and that `libssh2` was built with `zlib` support
enabled.
[1] https://www.libssh2.org/libssh2_session_flag.html
Ref: https://github.com/curl/curl/issues/1732
Closes https://github.com/curl/curl/pull/1735
Update the progress timers `t_nslookup`, `t_connect`, `t_appconnect`,
`t_pretransfer`, and `t_starttransfer` to track the total times for
these activities when a redirect is followed. Previously, only the times
for the most recent request would be tracked.
Related changes:
- Rename `Curl_pgrsResetTimesSizes` to `Curl_pgrsResetTransferSizes`
now that the function only resets transfer sizes and no longer
modifies any of the progress timers.
- Add a bool to the `Progress` struct that is used to prevent
double-counting `t_starttransfer` times.
Added test case 1399.
Fixes#522 and Known Bug 1.8
Closes#1602
Reported-by: joshhe on github
Commit curl-7_54_0-118-g8b2f22e changed the output format of curl --help
to use <file> and <dir> instead of FILE and DIR, which caused zsh.pl to
produce a broken completion script:
% curl --<TAB>
_curl:10: no such file or directory: seconds
Closes#1779
If libcurl was built with GSS-API support, it unconditionally advertised
GSS-API authentication while connecting to a SOCKS5 proxy. This caused
problems in environments with improperly configured Kerberos: a stock
libcurl failed to connect, despite libcurl built without GSS-API
connected fine using username and password.
This commit introduces the CURLOPT_SOCKS5_AUTH option to control the
allowed methods for SOCKS5 authentication at run time.
Note that a new option was preferred over reusing CURLOPT_PROXYAUTH
for compatibility reasons because the set of authentication methods
allowed by default was different for HTTP and SOCKS5 proxies.
Bug: https://curl.haxx.se/mail/lib-2017-01/0005.html
Closes https://github.com/curl/curl/pull/1454
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes#1280Closes#1462
This change introduces new alternatives for the existing six
curl_easy_getinfo() options that return sizes or speeds as doubles. The
new versions are named like the old ones but with an appended '_T':
CURLINFO_CONTENT_LENGTH_DOWNLOAD_T
CURLINFO_CONTENT_LENGTH_UPLOAD_T
CURLINFO_SIZE_DOWNLOAD_T
CURLINFO_SIZE_UPLOAD_T
CURLINFO_SPEED_DOWNLOAD_T
CURLINFO_SPEED_UPLOAD_T
Closes#1511
... unless "--output -" is used. Binary detection is done by simply
checking for a binary zero in early data.
Added test 1425 1426 to verify.
Closes#1512
Some code (e.g. Curl_fillreadbuffer) assumes that this buffer is not
exceedingly tiny and will break if it is. This same check is already
done at run time in the CURLOPT_BUFFERSIZE option.
... using the docs/cmdline-opts/gen.pl script, so that we get all the
command line option documentation from the same source.
The generation of the list has to be done manually and pasted into the
source code.
Closes#1465
... and USE_ENVIRONMENT and --environment. It was once added for RISC OS
support and its platform specific behavior has been annoying ever
since. Added in commit c3c8bbd3b2, mostly unchanged since
then. Most probably not actually used for years.
Closes#1463
Commit 80a87e8a broke 'make dist' as it can't handle installing from
absolute target names. Rearranged the dependencies so the absolute name
is used for building but the relative name is use for distributing.
The module contains a more comprehensive set of trust information than
supported by nss-pem, because libnssckbi.so also includes information
about distrusted certificates.
Reviewed-by: Kai Engert
Closes#1414
$< is only allowed in implicit rules in some non-GNU makes (e.g. BSD,
AIX) so avoid use elsewhere by referencing the dependent curl.1 file
directly instead. This is somewhat tricky because the file is supplied
in the packaged tar ball (but not in git) but must still be able to be
rebuilt when its dependencies change. The right thing must happen in
both tar ball and git source trees, as well as in both in-tree and
out-of-tree builds.
For some reason, CMake 2.8.12.2 did not expand the list argument in a
single DEPENDS argument. Remove the quotes, so it gets expanded into
multiple arguments for add_custom_command and add_custom_target.
Fixes https://github.com/curl/curl/issues/1370Closes#1372
Note that for some reason there is this warning (that also exists with
autotools, added since curl-7_15_1-94-ga718cb05f):
docs/libcurl/curl_multi_socket_all.3:1: can't open `man3/curl_multi_socket.3': No such file or directory
Additionally, adjust the roffit --mandir option to support creating
links when doing out-of-tree builds.
Ref: https://github.com/curl/curl/pull/1288
Also make Perl mandatory to allow building the docs.
While CMakeLists.txt could probably read the list of manual pages from
Makefile.am, actually putting those in CMakeLists.txt is cleaner so that
is what is done here.
Fixes#1230
Ref: https://github.com/curl/curl/pull/1288
For easier sharing with CMake. The contents were reformatted to use
two-space indent and expanded tabs (matching lib/Makefile.common).
Ref: https://github.com/curl/curl/pull/1288
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
This commit introduces the CURL_SSLVERSION_MAX_* constants as well as
the --tls-max option of the curl tool.
Closes https://github.com/curl/curl/pull/1166
maketgz now runs scripts/updatemanpages.pl to update the man pages .TH
section to use the current date and curl/libcurl version.
(TODO Section 3.1)
Closes#1058
