As POP3 final and continuation responses both begin with a + character,
and both the finalcode and contcode variables in SASLprotoc are set as
such, we cannot tell the difference between them when we are expecting
an optional continuation from the server such as the following:
+ something else from the server
+OK final response
Disabled these tests until such a time we can tell the responses apart.
The tftpd test server now logs all received options and thus all TFTP
test cases need to match them exactly.
Extended test 283 to use and verify --tftp-blksize.
Apparently there are sites out there that do redirects to URLs they
provide in plain UTF-8 or similar. Browsers and wget %-encode such
headers when doing a subsequent request. Now libcurl does too.
Added test 1138 to verify.
Closes#473
- Add new option CURLOPT_DEFAULT_PROTOCOL to allow specifying a default
protocol for schemeless URLs.
- Add new tool option --proto-default to expose
CURLOPT_DEFAULT_PROTOCOL.
In the case of schemeless URLs libcurl will behave in this way:
When the option is used libcurl will use the supplied default.
When the option is not used, libcurl will follow its usual plan of
guessing from the hostname and falling back to 'http'.
New tool option --ssl-no-revoke.
New value CURLSSLOPT_NO_REVOKE for CURLOPT_SSL_OPTIONS.
Currently this option applies only to WinSSL where we have automatic
certificate revocation checking by default. According to the
ssl-compared chart there are other backends that have automatic checking
(NSS, wolfSSL and DarwinSSL) so we could possibly accommodate them at
some later point.
Bug: https://github.com/bagder/curl/issues/264
Reported-by: zenden2k <zenden2k@gmail.com>
When CURL_SOCKET_BAD is returned in the callback, it should be treated
as an error (CURLE_COULDNT_CONNECT) if no other socket is subsequently
created when trying to connect to a server.
Bug: http://curl.haxx.se/mail/lib-2015-06/0047.html
Make the HTTP headers separated by default for improved security and
reduced risk for information leakage.
Bug: http://curl.haxx.se/docs/adv_20150429.html
Reported-by: Yehezkel Horowitz, Oren Souroujon
This commit fixes a regression introduced in curl-7_41_0-186-g261a0fe.
It also introduces a regression test 1424 based on tests 78 and 1423.
Reported-by: Viktor Szakats
Bug: https://github.com/bagder/curl/issues/237
Previously in Curl_http2_switched, we called nghttp2_session_mem_recv to
parse incoming data which were already received while curl was handling
upgrade. But we didn't call nghttp2_session_send, and it led to make
curl not send any response to the received frames. Most likely, we
received SETTINGS from server at this point, so we missed opportunity to
send SETTINGS + ACK. This commit adds missing nghttp2_session_send call
in Curl_http2_switched to fix this issue.
Bug: https://github.com/bagder/curl/issues/192
Reported-by: Stefan Eissing
"name =value" is fine and the space should just be skipped.
Updated test 31 to also test for this.
Bug: https://github.com/bagder/curl/issues/195
Reported-by: cromestant
Help-by: Frank Gevaerts
It seems that some systems (e.g. fairly consistently in some recent
Solaris autobuilds) would manage to get to the connect phase before the
progress callback was called, resulting in a CURLE_COULDNT_CONNECT
error. Reworked the test to point at a test server that never returns a
full result so the progress callback always gets a chance to be called
before the transfer can complete in some other way.
Since we just started make use of free(NULL) in order to simplify code,
this change takes it a step further and:
- converts lots of Curl_safefree() calls to good old free()
- makes Curl_safefree() not check the pointer before free()
The (new) rule of thumb is: if you really want a function call that
frees a pointer and then assigns it to NULL, then use Curl_safefree().
But we will prefer just using free() from now on.
... by using the regular Curl_http_done() method which checks for
that. This makes test 1801 fail consistently with error 56 (which seems
fine) to that test is also updated here.
Reported-by: Ben Darnell
Bug: https://github.com/bagder/curl/issues/166
...after the method line:
"Since the Host field-value is critical information for handling a
request, a user agent SHOULD generate Host as the first header field
following the request-line." / RFC 7230 section 5.4
Additionally, this will also make libcurl ignore multiple specified
custom Host: headers and only use the first one. Test 1121 has been
updated accordingly
Bug: http://curl.haxx.se/bug/view.cgi?id=1491
Reported-by: Rainer Canavan
When checking for a connection to re-use, a proxy-using request must
check for and use a proxy connection and not one based on the host
name!
Added test 1421 to verify
Bug: http://curl.haxx.se/bug/view.cgi?id=1492
* Missing initialisation of upload status caused a seg fault
* Missing data termination caused corrupt data to be uploaded
* Data verification should be performed in <upload> element
* Added missing recipient list cleanup
test1435: a simple test that checks whether a HTTP request can be
performed over the UNIX socket. The hostname/port are interpreted
by sws and should be ignored by cURL.
test1436: test for the ability to do two requests to the same host,
interleaved with one to a different hostname.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
This is the only user of the backtick operator in the command. As the
commands will soon not be executed by a shell anymore (but by perl),
replace the command with its output.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Added !SSPI to the features list of the HTTP digest tests, as SSPI
based builds now use the Windows SSPI messaging API rather than the
internal functions, and we can't control the random numbers that get
used as part of the digest.
Basically since servers often then don't respond well to this and
instead send the full contents and then libcurl would instead error out
with the assumption that the server doesn't support resume. As the data
is then already transfered, this is now considered fine.
Test case 1434 added to verify this. Test case 1042 slightly modified.
Reported-by: hugo
Bug: http://curl.haxx.se/bug/view.cgi?id=1443
HTTP 1.1 is clearly specified to only allow three digit response codes,
and libcurl used sscanf("%3d") for that purpose. This made libcurl
support smaller numbers but not larger. It does now, but we will not
make any specific promises nor document this further since it is going
outside of what HTTP is.
Bug: http://curl.haxx.se/bug/view.cgi?id=1441
Reported-by: Balaji
CURLOPT_COPYPOSTFIELDS with a given CURLOPT_POSTFIELDSIZE does not
require a trailing zero of the data and by making sure this test doesn't
use one we know it works (combined with valgrind).
This change allows runtests.pl to be run from the CMake builddir:
export srcdir=/tmp/curl/tests;
perl -I$srcdir $srcdir/runtests.pl -l
In order to make this possible, all test cases have been moved from
Makefile.am to Makefile.inc.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Option --pinnedpubkey takes a path to a public key in DER format and
only connect if it matches (currently only implemented with OpenSSL).
Provides CURLOPT_PINNEDPUBLICKEY for curl_easy_setopt().
Extract a public RSA key from a website like so:
openssl s_client -connect google.com:443 2>&1 < /dev/null | \
sed -n '/-----BEGIN/,/-----END/p' | openssl x509 -noout -pubkey \
| openssl rsa -pubin -outform DER > google.com.der
By not detecting and rejecting domain names for partial literal IP
addresses properly when parsing received HTTP cookies, libcurl can be
fooled to both send cookies to wrong sites and to allow arbitrary sites
to set cookies for others.
CVE-2014-3613
Bug: http://curl.haxx.se/docs/adv_20140910A.html
Historically the default "unknown" value for progress.size_dl and
progress.size_ul has been zero, since these values are initialized
implicitly by the calloc that allocates the curl handle that these
variables are a part of. Users of curl that install progress
callbacks may expect these values to always be >= 0.
Currently it is possible for progress.size_dl and progress.size_ul
to by set to a value of -1, if Curl_pgrsSetDownloadSize() or
Curl_pgrsSetUploadSize() are passed a "size" of -1 (which a few
places currently do, and a following patch will add more). So
lets update Curl_pgrsSetDownloadSize() and Curl_pgrsSetUploadSize()
so they make sure that these variables always contain a value that
is >= 0.
Updates test579 and test599.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
... to handle "*/[total]". Also, removed the strange hack that made
CURLOPT_FAILONERROR on a 416 response after a *RESUME_FROM return
CURLE_OK.
Reported-by: Dimitrios Siganos
Bug: http://curl.haxx.se/mail/lib-2014-06/0221.html
Curl_rand() will return a dummy and repatable random value for this
case. Makes it possible to write test cases that verify output.
Also, fake timestamp with CURL_FORCETIME set.
Only when built debug enabled of course.
Curl_ssl_random() was not used anymore so it has been
removed. Curl_rand() is enough.
create_digest_md5_message: generate base64 instead of hex string
curl_sasl: also fix memory leaks in some OOM situations
