80cec5a62a
Fixed the test harness so it will write out zero-length data files.
2008-03-06 01:11:43 +00:00
2c80bcbc81
made the non-matching error code output nicer since we know it is a number
...
and the string contains a newline...
2008-02-20 12:14:31 +00:00
cf9259dd92
verifyserver() actually returns the pid of the unsecure http and ftp servers
...
when verifying the https and ftps servers
2008-02-13 06:06:57 +00:00
6634e3c3a3
On heavily loaded systems any test server start up can take longer than the
...
timeout passed to startnew, when this happens startnew completes without being
able to read the pidfile and consequently returns a zero pid2.
To fix the above posibility the server pid is recovered from the verification
stage which will actually return the server pid when verification is valid.
2008-02-12 13:47:56 +00:00
75c369dcca
Disable test due to keyword before disabling due to bad server.
2008-02-11 20:10:36 +00:00
6942d313ff
Verify only once test harness sftp server connectivity and functionality.
...
Make sure that the sftp client tool uses the ssh client binary that we have
used to generate the configuration files, otherwise sftp might be using one
located in the preferred path compiled into sftp.
2008-02-10 02:52:17 +00:00
1a340de0e5
To verify that the sftp server is actually running, responsive and that
...
all curl's tests generated configuration and key files are fine, a real
connection is established to the test harness sftp server authenticating
and running a simple sftp remote pwd command.
The verification is done using OpenSSH's or SunSSH's sftp client tool with
a configuration file with the same options as the test harness socks server
with the exception that dynamic forwarding is not used for sftp.
2008-02-08 13:54:02 +00:00
01d95b56a0
fix failure to properly detect SSH and SOCKS servers start up on loaded systems
2008-01-18 09:18:59 +00:00
6893fcaa9b
remove trailing comma too, even though I don't think it does any harm
2008-01-16 22:09:51 +00:00
301ae1ae1b
Nathan Coulter's patch that makes runtests.pl respect the PATH when figuring
...
out what valgrind to run.
2008-01-16 22:08:37 +00:00
69f685056d
startnew() shouldn't return a positive pid as reported in the pidfile
...
by the spawned server itself unless it is actually alive
2008-01-14 19:28:54 +00:00
2b63eb8511
Ooops
2008-01-12 00:12:16 +00:00
f09fe4b49f
Ooops
2008-01-11 21:59:05 +00:00
35be09cf58
When verifying that test harness's SSH and SOCKS servers have been
...
started check also that the process is actually alive, since they
could have died once the pidfile was written out
2008-01-11 20:17:33 +00:00
14ff7e75e0
Temporary change to help debugging SSH server verification failures
2008-01-10 16:19:14 +00:00
32cc75d6cb
Partially cleanup debugging messages in test harness, introduced for
...
new minimum SSH version support for SCP, SFTP and SOCKS tests.
Some verbosity which still remains, will go out before next release.
2008-01-08 20:12:43 +00:00
2408b236ca
Display ssh server log and configuration upon socks server failure
2008-01-08 00:39:31 +00:00
fe0d7aee49
Daniel Egger provided 'nonewline=yes' support for the <stdout> section
2008-01-04 23:31:04 +00:00
a4945fe687
Missing newline at end of message
2008-01-04 19:56:56 +00:00
7a2177dc42
- Display curl_ssh_config when socks server fails to start.
...
- Capability of running socks5 tests must be based on ssh daemon version
and not on ssh client version.
2008-01-04 13:00:40 +00:00
bf6e2f28ba
Make sure @INC is modified before 'using' the sshhelp module.
2008-01-04 03:05:33 +00:00
fd8d862c37
Modify test harness so that the minimum SSH version required to run
...
SCP, SFTP and SOCKS4 tests is now OpenSSH 2.9.9 or SunSSH 1.0
For SOCKS5 tests minimum versions are OpenSSH 3.7 or SunSSH 1.0
2008-01-03 20:48:22 +00:00
9cd30c2012
Use getcwd() to get the directory, which works even if one of the directory
...
components doesn't have read permission set.
2007-12-22 18:25:43 +00:00
08cb30801c
Stop ssh and socks servers when verification fails
2007-11-26 14:26:40 +00:00
788de4f7ba
Providing an explicit bind address besides the port for dynamic application-level
...
port forwarding, our socks port, prevents ssh from running on some systems.
By default, ssh binds local port forwardings to the loopback address, since this
was the address being given as the explicit bind address, now it isn't given.
2007-11-26 14:07:09 +00:00
d59841618d
Temporary change to better debug startup failures
...
of test suite ssh and socks servers.
2007-11-26 02:45:24 +00:00
8d3964782a
Allow different start timeout specification for each server
2007-11-25 03:55:53 +00:00
5b809a3104
make 'checkdied' in runtests.pl more robust
2007-11-23 12:18:45 +00:00
3daa54d636
Revert last change since it breaks running the test suite
...
when builddir is different from srcdir.
2007-11-23 09:50:44 +00:00
8f1829d1d2
Improve chance of running runtests.pl from outside the
...
source tree 'tests' directory
2007-11-23 04:03:46 +00:00
6efb6addf2
Debugging messages to trace startnew failures
2007-11-22 19:56:38 +00:00
61e2e86aef
Temporary change adding additional debugging messages to better pinpoint
...
startup failures of test suite ssh and socks servers.
2007-11-21 19:33:09 +00:00
5376d1047c
This is a temporary change to test if OpenSSH 3.6 and SunSSH 1.1
...
are good/compatible enough to run the test suite ssh server and
socks tests
2007-11-19 17:20:32 +00:00
59dcc7e191
Michal Marek made the test suite remember what test servers that fail to
...
start so that subsequent tries are simply skipped.
2007-11-16 23:06:53 +00:00
44d408204a
Michal Marek fixed the test suite to better deal with the case when the HTTP
...
ipv6 server can't run.
2007-11-15 22:41:31 +00:00
8be493296d
Make postcheck failure message more like the others
2007-11-01 17:42:39 +00:00
3f55ed0ef7
Check that all servers in the <server> section are supported, not just
...
the first.
2007-10-26 19:26:04 +00:00
b7dd186d36
When valgrind is disabled in the test file, don't run it at all (as opposed
...
to running it and ignoring its output).
2007-10-25 19:39:52 +00:00
26c1c8b2ad
Don't show valgrind log files of other tests
2007-10-25 18:07:13 +00:00
824aa5f918
Michal Marek fixed the test script to be able to use valgrind even when the
...
lib is built shared with libtool.
2007-10-25 14:30:51 +00:00
2fce1f3e97
Fixed the -l option of runtests.pl
...
Added support for skipping tests based on key words.
2007-10-11 21:15:09 +00:00
4686adb433
Added variable substitution to the <verify><file> section.
...
Made a few more tests work remotely.
2007-09-20 20:39:17 +00:00
048c74f2fa
Added %CLIENTIP and %CLIENT6IP data file substitution variables.
...
Added hooks to the test suite to make it possible to test a curl running
on a remote host.
2007-09-17 21:42:01 +00:00
c7e0d8c30b
add some better logging when HTTP server start fails, and make the failure
...
really hard if the test server can't be resolved (like for ::1 ipv6)
2007-07-14 22:33:46 +00:00
c45d44fee9
Wait longer for servers to start up since the ssh server needs to generate
...
keys the first time (which can take a while on a slow or loaded host).
Enforce a longer startup wait time for the ssh client SOCKS server, too.
Check for an error code from startnew() when starting any server.
2007-06-11 17:53:10 +00:00
477e27f99d
Fixed the test harness so that it actually kills the ssh being used as
...
the SOCKS server.
2007-06-08 18:56:05 +00:00
873d95a34c
Incorporated Daniel Black's test706 and test707 SOCKS test cases.
2007-06-08 17:21:40 +00:00
1500e95839
Improved compatibility with perl 5.0 on the 'open' calls.
2007-06-08 17:03:50 +00:00
ad80490711
Changed the opens to work on older versions of perl.
...
Redirect ssh output to ssh.log
2007-06-07 22:42:26 +00:00
f0ffb35d55
Fixed some problems in starting SSH for use in SOCKS.
2007-06-07 19:49:09 +00:00
Dan Fandrich