... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
Curl_select_ready() was the former API that was replaced with
Curl_select_check() a while back and the former arg setup was provided
with a define (in order to leave existing code unmodified).
Now we instead offer SOCKET_READABLE and SOCKET_WRITABLE for the most
common shortcuts where only one socket is checked. They're also more
visibly macros.
As it seems to be a rarely used cipher suite (for securely established
but _unencrypted_ connections), I believe it is fine not to provide an
alias for the misspelled variant.
LibreSSL defines `OPENSSL_VERSION_NUMBER` as `0x20000000L` for all
versions returning `LibreSSL/2.0.0` for any LibreSSL version.
This change provides a local OpenSSL_version_num function replacement
returning LIBRESSL_VERSION_NUMBER instead.
Closes#1029
The OpenSSL function CRYTPO_cleanup_all_ex_data() cannot be called
multiple times without crashing - and other libs might call it! We
basically cannot call it without risking a crash. The function is a
no-op since OpenSSL 1.1.0.
Not calling this function only risks a small memory leak with OpenSSL <
1.1.0.
Bug: https://curl.haxx.se/mail/lib-2016-09/0045.html
Reported-by: Todd Short
OpenSSL 1.0.1 and 1.0.2 build an error queue that is stored per-thread
so we need to clean it when easy handles are freed, in case the thread
will be killed in which the easy handle was used. All OpenSSL code in
libcurl should extract the error in association with the error already
so clearing this queue here should be harmless at worst.
Fixes#964
... by partially reverting f975f06033. The allocation could be made by
OpenSSL so the free must be made with OPENSSL_free() to avoid problems.
Reported-by: Harold Stuart
Fixes#1005
CURLINFO_SSL_VERIFYRESULT does not get the certificate verification
result when SSL_connect fails because of a certificate verification
error.
This fix saves the result of SSL_get_verify_result so that it is
returned by CURLINFO_SSL_VERIFYRESULT.
Closes https://github.com/curl/curl/pull/995
While noErr and errSecSuccess are defined as the same value, the API
documentation states that SecPKCS12Import() returns errSecSuccess if
there were no errors in importing. Ensure that a future change of the
defined value doesn't break (however unlikely) and be consistent with
the API docs.
- Disable ALPN on Wine.
- Don't pass input secbuffer when ALPN is disabled.
When ALPN support was added a change was made to pass an input secbuffer
to initialize the context. When ALPN is enabled the buffer contains the
ALPN information, and when it's disabled the buffer is empty. In either
case this input buffer caused problems with Wine and connections would
not complete.
Bug: https://github.com/curl/curl/issues/983
Reported-by: Christian Fillion
Serialise the call to PK11_FindSlotByName() to avoid spurious errors in
a multi-threaded environment. The underlying cause is a race condition
in nssSlot_IsTokenPresent().
Bug: https://bugzilla.mozilla.org/1297397Closes#985
Undo change introduced in d4643d6 which caused iPAddress match to be
ignored if dNSName was present but did not match.
Also, if iPAddress is present but does not match, and dNSName is not
present, fail as no-match. Prior to this change in such a case the CN
would be checked for a match.
Bug: https://github.com/curl/curl/issues/959
Reported-by: wmsch@users.noreply.github.com
In order to make MBEDTLS_DEBUG work, the debug threshold must be unequal
to 0. This patch also adds a comment how mbedtls must be compiled in
order to make debugging work, and explains the possible debug levels.
Prior to this change we called Curl_ssl_getsessionid and
Curl_ssl_addsessionid regardless of whether session ID reusing was
enabled. According to comments that is in case session ID reuse was
disabled but then later enabled.
The old way was not intuitive and probably not something users expected.
When a user disables session ID caching I'd guess they don't expect the
session ID to be cached anyway in case the caching is later enabled.
Calling QueryContextAttributes with SECPKG_ATTR_APPLICATION_PROTOCOL
fails on Windows < 8.1 so we need to disable ALPN on these OS versions.
Inspiration provide by: Daniel Seither
Closes#848Fixes#840
Sessionid cache management is inseparable from managing individual
session lifetimes. E.g. for reference-counted sessions (like those in
SChannel and OpenSSL engines) every session addition and removal
should be accompanied with refcount increment and decrement
respectively. Failing to do so synchronously leads to a race condition
that causes symptoms like use-after-free and memory corruption.
This commit:
- makes existing session cache locking explicit, thus allowing
individual engines to manage lock's scope.
- fixes OpenSSL and SChannel engines by putting refcount management
inside this lock's scope in relevant places.
- adds these explicit locking calls to other engines that use
sessionid cache to accommodate for this change. Note, however,
that it is unknown whether any of these engines could also have
this race.
Bug: https://github.com/curl/curl/issues/815Fixes#815Closes#847
Regression from the previous *printf() rearrangements, this file missed to
include the correct header to make sure snprintf() works universally.
Reported-by: Moti Avrahami
Bug: https://curl.haxx.se/mail/lib-2016-05/0196.html
...as otherwise the TLS libs will skip the CN/SAN check and just allow
connection to any server. curl previously skipped this function when SNI
wasn't used or when connecting to an IP address specified host.
CVE-2016-3739
Bug: https://curl.haxx.se/docs/adv_20160518A.html
Reported-by: Moti Avrahami
The new way of disabling certificate verification doesn't work on
Mountain Lion (OS X 10.8) so we need to use the old way in that version
too. I've tested this solution on versions 10.7.5, 10.8, 10.9, 10.10.2
and 10.11.
Closes#802
... introduced in curl-7_48_0-293-g2968c83:
Error: COMPILER_WARNING:
lib/vtls/openssl.c: scope_hint: In function ‘Curl_ossl_check_cxn’
lib/vtls/openssl.c:767:15: warning: conversion to ‘int’ from ‘ssize_t’
may alter its value [-Wconversion]
- In the case of recv error, limit returning 'connection still in place'
to EINPROGRESS, EAGAIN and EWOULDBLOCK.
This is an improvement on the parent commit which changed the openssl
connection check to use recv MSG_PEEK instead of SSL_peek.
Ref: https://github.com/curl/curl/commit/856baf5#comments
Calling SSL_peek can cause bytes to be read from the raw socket which in
turn can upset the select machinery that determines whether there's data
available on the socket.
Since Curl_ossl_check_cxn only tries to determine whether the socket is
alive and doesn't actually need to see the bytes SSL_peek seems like
the wrong function to call.
We're able to occasionally reproduce a connect timeout due to this
bug. What happens is that Curl doesn't know to call SSL_connect again
after the peek happens since data is buffered in the SSL buffer and thus
select won't fire for this socket.
Closes#795
Only protocols that actually have a protocol registered for ALPN and NPN
should try to get that negotiated in the TLS handshake. That is only
HTTPS (well, http/1.1 and http/2) right now. Previously ALPN and NPN
would wrongly be used in all handshakes if libcurl was built with it
enabled.
Reported-by: Jay Satiro
Fixes#789
When compiling with OpenSSL 1.1.0 (so that the HAVE_X509_GET0_SIGNATURE
&& HAVE_X509_GET0_EXTENSIONS pre-processor block is active), Visual C++
14 complains:
warning C4701: potentially uninitialized local variable 'palg' used
warning C4701: potentially uninitialized local variable 'psig' used
... to allow users to see which specfic wildcard that matched when such
is used.
Also minor logic cleanup to simplify the code, and I removed all tabs
from verbose strings.
Prior to this change when a single protocol CURL_SSLVERSION_ was
specified by the user that version was set only as the minimum version
but not as the maximum version as well.
Since we didn't keep the input argument around after having called
mbedtls, it could end up accessing the wrong memory when figuring out
the ALPN protocols.
Closes#642
As of https://boringssl-review.googlesource.com/#/c/6980/, almost all of
BoringSSL #ifdefs in cURL should be unnecessary:
- BoringSSL provides no-op stubs for compatibility which replaces most
#ifdefs.
- DES_set_odd_parity has been in BoringSSL for nearly a year now. Remove
the compatibility codepath.
- With a small tweak to an extend_key_56_to_64 call, the NTLM code
builds fine.
- Switch OCSP-related #ifdefs to the more generally useful
OPENSSL_NO_OCSP.
The only #ifdefs which remain are Curl_ossl_version and the #undefs to
work around OpenSSL and wincrypt.h name conflicts. (BoringSSL leaves
that to the consumer. The in-header workaround makes things sensitive to
include order.)
This change errs on the side of removing conditionals despite many of
the restored codepaths being no-ops. (BoringSSL generally adds no-op
compatibility stubs when possible. OPENSSL_VERSION_NUMBER #ifdefs are
bad enough!)
Closes#640
When trying to verify a peer without having any root CA certificates
set, this makes libcurl use the TLS library's built in default as
fallback.
Closes#569
- Switch from verifying a pinned public key in a callback during the
certificate verification to inline after the certificate verification.
The callback method had three problems:
1. If a pinned public key didn't match, CURLE_SSL_PINNEDPUBKEYNOTMATCH
was not returned.
2. If peer certificate verification was disabled the pinned key
verification did not take place as it should.
3. (related to #2) If there was no certificate of depth 0 the callback
would not have checked the pinned public key.
Though all those problems could have been fixed it would have made the
code more complex. Instead we now verify inline after the certificate
verification in mbedtls_connect_step2.
Ref: http://curl.haxx.se/mail/lib-2016-01/0047.html
Ref: https://github.com/bagder/curl/pull/601
... by extracting the LIB + REASON from the OpenSSL error code. OpenSSL
1.1.0+ returned a new func number of another cerfificate fail so this
required a fix and this is the better way to catch this error anyway.
The function is only present in wolfssl/cyassl if it was built with
--enable-opensslextra. With these checks added, pinning support is disabled
unless the TLS lib has that function available.
Also fix the mistake in configure that checks for the wrong lib name.
Closes#566
They tend to never get updated anyway so they're frequently inaccurate
and we never go back to revisit them anyway. We document issues to work
on properly in KNOWN_BUGS and TODO instead.
BoringSSL implements `BIO_get_mem_data` as a function, instead of a
macro, and expects the output pointer to be a `char **`. We have to add
an explicit cast to grab the pointer as a `const char **`.
Closes#524
This reverts commit 370ee919b3.
Issue #509 has all the details but it was confirmed that the crash was
not due to this, so the previous commit was wrong.
sk_X509_pop will decrease the size of the stack which means that the loop would
end after having added only half of the certificates.
Also make sure that the X509 certificate is freed in case
SSL_CTX_add_extra_chain_cert fails.
- Change algorithm init to happen after OpenSSL config load.
Additional algorithms may be available due to the user's config so we
initialize the algorithms after the user's config is loaded.
Bug: https://github.com/bagder/curl/issues/447
Reported-by: Denis Feklushkin
If GnuTLS fails to read the certificate then include whatever reason it
provides in the failure message reported to the client.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
The gnutls vtls back-end was previously ignoring any password set via
CURLOPT_KEYPASSWD. Presumably this was because
gnutls_certificate_set_x509_key_file did not support encrypted keys.
gnutls now has a gnutls_certificate_set_x509_key_file2 function that
does support encrypted keys. Let's determine at compile time whether the
available gnutls supports this new function. If it does then use it to
pass the password. If it does not then emit a helpful diagnostic if a
password is set. This is preferable to the previous behaviour of just
failing to read the certificate without giving a reason in that case.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
- Change the designator name we use to show the base64 encoded sha256
hash of the server's public key from 'pinnedpubkey' to
'public key hash'.
Though the server's public key hash is only shown when comparing pinned
public key hashes, the server's hash may not match one of the pinned.
Without this workaround, NSS re-uses a session cache entry despite the
server name does not match. This causes SNI host name to differ from
the actual host name. Consequently, certain servers (e.g. github.com)
respond by 400 to such requests.
Bug: https://bugzilla.mozilla.org/1202264
