SSL_VersionRangeGetDefault returns (TLSv1.0, TLSv1.2) as supported
range in NSS 3.45. It looks like the intention is to raise the minimum
version rather than lowering the maximum, so adjust accordingly. Note
that the caller (nss_setup_connect) initializes the version range to
(TLSv1.0, TLSv1.3), so there is no need to check for >= TLSv1.0 again.
Closes#4187
Reviewed-by: Daniel Stenberg
Reviewed-by: Kamil Dudka
PK11_IsPresent() checks for the token for the given slot is available,
and sets needlogin flags for the PK11_Authenticate() call. Should it
return false, we should however treat it as an error and bail out.
Closes https://github.com/curl/curl/pull/4110
The file suffix for dynamically loadable objects on macOS is .dylib,
which need to be added for the module definitions in order to get the
NSS TLS backend to work properly on macOS.
Closes https://github.com/curl/curl/pull/4046
The value of the maxPTDs parameter to PR_Init() has since at least
NSPR 2.1, which was released sometime in 1998, been marked ignored
as is accordingly not used in the initialization code. Setting it
to a value when calling PR_Init() is thus benign, but indicates an
intent which may be misleading. Reset the value to zero to improve
clarity.
Closes https://github.com/curl/curl/pull/4054
Change the logic around such that we only keep CRLs that NSS actually
ended up caching around for later deletion. If CERT_CacheCRL() fails
then there is little point in delaying the freeing of the CRL as it
is not used.
Closes https://github.com/curl/curl/pull/4053
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
Currently you can do things like --cert <(cat ./cert.crt) with (at least) the
openssl backend, but that doesn't work for nss because is_file rejects fifos.
I don't actually know if this is sufficient, nss might do things internally
(like seeking back) that make this not work, so actual testing is needed.
Closes#3807
As soon as a TLS backend gets ALPN conformation about the specific HTTP
version it can now set the multiplex situation for the "bundle" and
trigger moving potentially queued up transfers to the CONNECT state.
NSS may be built without support for the latest SSL/TLS versions,
leading to "SSL version range is not valid" errors when the library
code supports a recent version (e.g. TLS v1.3) but it has explicitly
been disabled.
This change adjusts the maximum SSL version requested by libcurl to
be the maximum supported version at runtime, as long as that version
is at least as high as the minimum version required by libcurl.
Fixes#3261
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
- Treat CURL_SSLVERSION_MAX_NONE the same as
CURL_SSLVERSION_MAX_DEFAULT. Prior to this change NONE would mean use
the minimum version also as the maximum.
This is a follow-up to 6015cef which changed the behavior of setting
the SSL version so that the requested version would only be the minimum
and not the maximum. It appears it was (mostly) implemented in OpenSSL
but not other backends. In other words CURL_SSLVERSION_TLSv1_0 used to
mean use just TLS v1.0 and now it means use TLS v1.0 *or later*.
- Fix CURL_SSLVERSION_MAX_DEFAULT for OpenSSL.
Prior to this change CURL_SSLVERSION_MAX_DEFAULT with OpenSSL was
erroneously treated as always TLS 1.3, and would cause an error if
OpenSSL was built without TLS 1.3 support.
Co-authored-by: Daniel Gustafsson
Fixes https://github.com/curl/curl/issues/2969
Closes https://github.com/curl/curl/pull/3012
... instead of previous separate struct fields, to make it easier to
extend and change individual backends without having to modify them all.
closes#2547
There is information about the compiled-in SSL backends that is really
no concern of any code other than the SSL backend itself, such as which
function (if any) implements SHA-256 summing.
And there is information that is really interesting to the user, such as
the name, or the curl_sslbackend value.
Let's factor out the latter into a publicly visible struct. This
information will be used in the upcoming API to set the SSL backend
globally.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When building software for the masses, it is sometimes not possible to
decide for all users which SSL backend is appropriate.
Git for Windows, for example, uses cURL to perform clones, fetches and
pushes via HTTPS, and some users strongly prefer OpenSSL, while other
users really need to use Secure Channel because it offers
enterprise-ready tools to manage credentials via Windows' Credential
Store.
The current Git for Windows versions use the ugly work-around of
building libcurl once with OpenSSL support and once with Secure Channel
support, and switching out the binaries in the installer depending on
the user's choice.
Needless to say, this is a super ugly workaround that actually only
works in some cases: Git for Windows also comes in a portable form, and
in a form intended for third-party applications requiring Git
functionality, in which cases this "swap out libcurl-4.dll" simply is
not an option.
Therefore, the Git for Windows project has a vested interest in teaching
cURL to make the SSL backend a *runtime* option.
This patch makes that possible.
By running ./configure with multiple --with-<backend> options, cURL will
be built with multiple backends.
For the moment, the backend can be configured using the environment
variable CURL_SSL_BACKEND (valid values are e.g. "openssl" and
"schannel").
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
So far, all of the SSL backends' private data has been declared as
part of the ssl_connect_data struct, in one big #if .. #elif .. #endif
block.
This can only work as long as the SSL backend is a compile-time option,
something we want to change in the next commits.
Therefore, let's encapsulate the exact data needed by each SSL backend
into a private struct, and let's avoid bleeding any SSL backend-specific
information into urldata.h. This is also necessary to allow multiple SSL
backends to be compiled in at the same time, as e.g. OpenSSL's and
CyaSSL's headers cannot be included in the same .c file.
To avoid too many malloc() calls, we simply append the private structs
to the connectdata struct in allocate_conn().
This requires us to take extra care of alignment issues: struct fields
often need to be aligned on certain boundaries e.g. 32-bit values need to
be stored at addresses that divide evenly by 4 (= 32 bit / 8
bit-per-byte).
We do that by assuming that no SSL backend's private data contains any
fields that need to be aligned on boundaries larger than `long long`
(typically 64-bit) would need. Under this assumption, we simply add a
dummy field of type `long long` to the `struct connectdata` struct. This
field will never be accessed but acts as a placeholder for the four
instances of ssl_backend_data instead. the size of each ssl_backend_data
struct is stored in the SSL backend-specific metadata, to allow
allocate_conn() to know how much extra space to allocate, and how to
initialize the ssl[sockindex]->backend and proxy_ssl[sockindex]->backend
pointers.
This would appear to be a little complicated at first, but is really
necessary to encapsulate the private data of each SSL backend correctly.
And we need to encapsulate thusly if we ever want to allow selecting
CyaSSL and OpenSSL at runtime, as their headers cannot be included within
the same .c file (there are just too many conflicting definitions and
declarations for that).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
At the moment, cURL's SSL backend needs to be configured at build time.
As such, it is totally okay for them to hard-code their backend-specific
data in the ssl_connect_data struct.
In preparation for making the SSL backend a runtime option, let's make
the access of said private data a bit more abstract so that it can be
adjusted later in an easy manner.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the ongoing endeavor to abstract out all SSL backend-specific
functionality, this is the next step: Instead of hard-coding how the
different SSL backends access their internal data in getinfo.c, let's
implement backend-specific functions to do that task.
This will also allow for switching SSL backends as a runtime option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These functions are all available via the Curl_ssl struct now, no need
to declare them separately anymore.
As the global declarations are removed, the corresponding function
definitions are marked as file-local. The only two exceptions here are
Curl_mbedtls_shutdown() and Curl_polarssl_shutdown(): only the
declarations were removed, there are no function definitions to mark
file-local.
Please note that Curl_nss_force_init() is *still* declared globally, as
the only SSL backend-specific function, because it was introduced
specifically for the use case where cURL was compiled with
`--without-ssl --with-nss`. For details, see f3b77e561 (http_ntlm: add
support for NSS, 2010-06-27).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The entire idea of introducing the Curl_ssl struct to describe SSL
backends is to prepare for choosing the SSL backend at runtime.
To that end, convert all the #ifdef have_curlssl_* style conditionals
to use bit flags instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The SHA-256 checksumming is also an SSL backend-specific function.
Let's include it in the struct declaring the functionality of SSL
backends.
In contrast to MD5, there is no fall-back code. To indicate this, the
respective entries are NULL for those backends that offer no support for
SHA-256 checksumming.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The MD5 summing is also an SSL backend-specific function. So let's
include it, offering the previous fall-back code as a separate function
now: Curl_none_md5sum(). To allow for that, the signature had to be
changed so that an error could be returned from the implementation
(Curl_none_md5sum() can run out of memory).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the first step to unify the SSL backend handling. Now all the
SSL backend-specific functionality is accessed via a global instance of
the Curl_ssl struct.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The idea of introducing the Curl_ssl struct was to unify how the SSL
backends are declared and called. To this end, we now provide an
instance of the Curl_ssl struct for each and every SSL backend.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
... causing a SIGSEGV in showit() in case the handle used to initiate
the connection has already been freed.
This commit fixes a bug introduced in curl-7_19_5-204-g5f0cae803.
Reported-by: Rob Sanders
Bug: https://bugzilla.redhat.com/1436158
The module contains a more comprehensive set of trust information than
supported by nss-pem, because libnssckbi.so also includes information
about distrusted certificates.
Reviewed-by: Kai Engert
Closes#1414
This fixes 3 warnings issued by MinGW:
1. PR_ImportTCPSocket actually has a paramter of type PROsfd instead of
PRInt32, which is 64 bits on Windows. Fixed this by including the
corresponding header file instead of redeclaring the function, which is
supported even though it is in the private include folder. [1]
2. In 64-bit mode, size_t is 64 bits while CK_ULONG is 32 bits, so an explicit
narrowing cast is needed.
3. Curl_timeleft returns time_t instead of long since commit
21aa32d30d.
[1] https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSPR/Reference/PR_ImportTCPSocket
Closes https://github.com/curl/curl/pull/1393
