make 'pidfile' and 'logfile' options appear first on command line in order
to ensure that processing of other options which write to logfile do this
to intended file and not the default one.
There's a new 'http-proxy' server for tests that runs on a separate port
and lets clients do HTTP CONNECT to other ports on the same host to
allow us to test HTTP "tunneling" properly.
Test cases now have a <proxy> section in <verify> to check that the
proxy protocol part matches correctly.
Test case 80, 83, 95, 275, 503 and 1078 have been converted. Test 1316
was added.
When a HTTP connection is re-used for a subsequent request without
proxy, it would always re-use the Host: header of the first request. As
host names are case insensitive it would make curl send another host
name case that what the particular request used.
Now it will instead always use the most recent host name to always use
the desired casing.
Added test case 1318 to verify.
Bug: http://curl.haxx.se/mail/lib-2011-12/0314.html
Reported by: Alex Vinnik
Initial step in order to allow our pingpong server to better support arbitrary
application data splitting among TCP packets. This first commit only addresses
reasembly of data that sockfilter processes reads from soockets and pingpong
server later reads from sockfilters stdout.
Make testcurl.pl ignore messages pertaining to third party m4 files we don't
care nor use on a file basis policy while retaining all other warnings.
This closes temporary commit e71e226f
1- Two new error codes are introduced.
CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of
FTP server connected.
CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts.
Neither of these errors are considered fatal and control connection
remains OK because it could just be a firewall blocking server to
connect to the client.
2- One new setopt option was introduced.
CURLOPT_ACCEPTTIMEOUT_MS
It sets the maximum amount of time FTP client is going to wait for a
server to connect. Internal default accept timeout is 60 seconds.
As commit ce896875f8 fixed a timer that accidentally had been moved in
code and then returned a bad timer, the lib500.c code (used in test 500
and some others) now verifies 5 timers against each other to verify that
they have the correct relative values. We cannot compare against
absolute values as the timings will vary a lot.
Test case 1315 was added to verify this functionality. When passing in
multiple files to a single -F, the parser would get all confused if one
of the specified files had a custom type= assigned.
Reported by: Colin Hogben
Keep track of which sockets that are the result of accept() calls and
refuse to call the closesocket callback for those sockets. Test case 596
now verifies that the open socket callback is called the same number of
times as the closed socket callback for active FTP connections.
Bug: http://curl.haxx.se/mail/lib-2011-12/0018.html
Reported by: Gokhan Sengun
When the new socket is created for an active connection, it is now done
using the open socket callback.
Test case 596 was modified to run fine, although it hides the fact that
the close callback is still called too many times, as it also gets
called for closing sockets that were created with accept().
Previously the log function would just filter out all CR and LF
occurances from the log to make it more readable. This had the downside
that it made it very hard to see CR LFs when they actually matters.
Now, they're instead converted to "[CR]" and "[LR]" in the log to become
apparent to readers.
Curl_pop3_write() now has a state machine that scans for the end of a
POP3 body so that the CR LF '.' CR LF sequence can come in everything
from one up to five subsequent packets.
Test case 810 is modified to use SLOWDOWN which makes the server pause
between each single byte and thus makes the POP3 body get sent to curl
basically one byte at a time.
"Active FTP hangs if server does not open data connection"
The server first sends a 150 and then when libcurl waits for the data
transfer, the server sends a 425.
The protocol parts for these tests do not include QUIT simply because
the error is CURLE_OPERATION_TIMEDOUT (28) which is a generic timeout
error without specificly saying for which connection it concerns, and
for timeouts libcurl marks the control channel as "invalid". As this
test case times out for the data connection it could still use the
control channel.
Skip a floating point addition operation when integral part of time difference
is zero. This avoids potential floating point addition rounding problems while
preserving decimal part value.
By setting PROTOPT_NOURLQUERY in the protocol handler struct, the
protocol will get the "query part" of the URL cut off before the data is
handled by the protocol-specific code. This makes libcurl adhere to
RFC3986 section 2.2.
Test 1220 is added to verify a file:// URL with query-part.
A regression between 7.22.0 and 7.23.0 -- downloading a file with the
flags -O and -J results in the content being written to stdout if and
only if there was no Content-Disposition header in the http response. If
there is a C-D header with a filename attribute, the output is correctly
written.
Reported by: Dave Reisner
Bug: http://curl.haxx.se/mail/archive-2011-11/0030.html
591 -> FTP multi PORT and 425 on upload
592 -> FTP multi PORT and 421 on upload
593 -> FTP multi PORT upload, no data conn and no transient neg. reply
594 -> FTP multi PORT upload, no data conn and no positive prelim. reply
1206 -> FTP PORT and 425 on download
1207 -> FTP PORT and 421 on download
1208 -> FTP PORT download, no data conn and no transient negative reply
1209 -> FTP PORT download, no data conn and no positive preliminary reply
This test is created to verify Rene Bernhardt's patch which makes sure
libcurl properly _not_ deals with Negotiate if not asked to even if the
proxy says it can serve it.
Make NODATACONN425 and NODATACONN421 return a 150 positive preliminary reply
before 425 or 421.
New NODATACONN150 returns 150 without further positive nor negative reply
Now NODATACONN doesn't reply anything at all.
Some torture tests left FTP test server in an unresponsive state, resulting
in torture tests that actually completed following unexpected code paths.
Changes in this commit solely address this issue and some adjustments for
ftpserver.pl logging relative to data channel establishment and tear down.
Pending NODATACONN relative adjustments reserved for a further commit.
Ensure verification takes place with no server commands file.
Ignore verbose setting for running server precheck.
Tweak unresponsive server message, to allow detection by haxx.se scripts.
NODATACONN421: applies only to active FTP mode, instructs server to not
establish data connection back to client and reply with FTP 421.
NODATACONN425: applies only to active FTP mode, instructs server to not
establish data connection back to client and reply with FTP 425.
NODATACONN: applies to both active and passive FTP modes, instructs server
to not establish nor accept a data channel and fool client into believing
that the data channel connection is possible.
Some polishing probably required.
When running torture tests, verify before each test case that required
pingpong servers which are supposed to be alive are actually responsive.
If found not responsive then restart them.
EPRT is now supported by default by the server. To disable it, use the
generic REPLY instruction in the <servercmd> tag. Test 116 now has it
disabled. All other existing active FTP port tests strip out the port
commands from the logs already so the change of the server isn't that
noticable.
As commit 5850cc4808 clarifies, libcurl can deliver header lines that
are longer than CURL_MAX_WRITE_SIZE, only body data is limited to that
size. The curl tool has check (when built debug-enabled) that made the
wrong checks and this new test 1205 verifies that larger headers work.
The fix is pretty much the one Nick Zitzmann provided, just edited to do
the right indent levels and with test case 1204 added to verify the fix.
Bug: http://curl.haxx.se/mail/lib-2011-10/0190.html
Reported by: Nick Zitzmann
When doing a multipart formpost with a read callback, and that callback
returns CURL_READFUNC_ABORT, that return code must be properly
propagated back and handled accordingly. Previously it would be handled
as a zero byte read which would cause a hang!
Added test case 587 to verify. It uses the lib554.c source code with a
small ifdef.
Reported by: Anton Bychkov
Bug: http://curl.haxx.se/mail/lib-2011-10/0097.html
When, for a given test, server is instructed to close connection after
server reply we now wait a very small amount of time (50ms) before doing
so. This is done to allow client to, at least partially, read server
reply before getting an ECONNRESET.
The above is required to make test cases 1070, 1200, 1201 and 1202 pass
with Cygwin 1.5.X on W2K.
GOPHER test server closes connection after _every_ server-reply, as such,
at some point it could require a bigger time or using shutdown() before
a server-side initiated disconnection.
Added missing memoryTracking to test cases 560 and 583. If this triggers
leak detection on these, it only means that previously it was going unnoticed.
Configure script option --enable-wb-ntlm-auth renamed to --enable-ntlm-wb
Configure script option --disable-wb-ntlm-auth renamed to --disable-ntlm-wb
Preprocessor symbol WINBIND_NTLM_AUTH_ENABLED renamed to NTLM_WB_ENABLED
Preprocessor symbol WINBIND_NTLM_AUTH_FILE renamed to NTLM_WB_FILE
Test harness env var CURL_NTLM_AUTH renamed to CURL_NTLM_WB_FILE
Static function wb_ntlm_close renamed to ntlm_wb_cleanup
Static function wb_ntlm_initiate renamed to ntlm_wb_init
Static function wb_ntlm_response renamed to ntlm_wb_response
Feature string literal NTLM_SSO renamed to NTLM_WB.
Preprocessor symbol USE_NTLM_SSO renamed to WINBIND_NTLM_AUTH_ENABLED.
curl's 'long' option 'ntlm-sso' renamed to 'ntlm-wb'.
Fix some comments to make clear that this is actually a NTLM delegation.
Previous interfaces for these libcurl internal functions did not allow to tell
apart a legitimate zero size result from an error condition. These functions
now return a CURLcode indicating function success or otherwise specific error.
Output size is returned using a pointer argument.
All usage of these two functions, and others closely related, has been adapted
to the new interfaces. Relative error and OOM handling adapted or added where
missing. Unit test 1302 also adapted.
