In preparation for separating the global config options from the per
operation config options, reworked the list engines code to not use a
member variable in the Configurable structure.
To help assist with the detection of incorrect return codes, as per
commits ee23d13a79, 33b8960dc8 and aba98991a5, updated the operate
based functions to return CURLcode error codes.
During initialisation SetHTTPrequest() may fail and cURL would return
PARAM_BAD_USE, which is equivalent to CURLE_NOT_BUILT_IN in cURL error
terms.
Instead, return CURLE_FAILED_INIT as we do for other functions that may
fail during initialisation.
Rather than check for required arguments, and prompt for any host and
proxy passwords, as each operation is performed, changed the code so
all configurations are checked before any operations are performed.
This allows the user to input all the required passwords, for example,
upfront rather than wait for each operation.
Since protocol headers contain explicit line-endings there should
be no automatic conversion to ASCII text or CRLF line-endings.
This might break third party tools that already depend on this
behaviour. We might need to introduce an option to make this optional.
Commmit c5f8e2f5f4 removed the easy handle clean-up from tool_operate,
letting the code that was already present in free_config_fields()
perform the task. Unfortunately, this wasn't the correct place to do
this as it broke protocols, that would perform a logout, as the main
clean-up in tool_main had already been called.
when using --http2 one can now selectively disable NPN or ALPN with
--no-alpn and --no-npn. for now honored with NSS only.
TODO: honor this option with GnuTLS and OpenSSL
Due to the changes in commit 3c929ff9f6 and lack of subsequent
updates, curl could return a CURLE_FTP_ACCEPT_FAILED error if
checkpasswd() ran out of memory in versions 7.33.0 and 7.34.0.
Updated the function declaration and return code to return
CURLE_OUT_OF_MEMORY and CURLE_OK where appropriate.
In the rare instance where getparameter() may return PARAM_NO_MEM whilst
parsing a URL, cURL would return this error code, which is equivalent to
CURLE_FTP_ACCEPT_FAILED in cURL error codes terms.
Instead, return CURLE_FAILED_INIT and output the failure reason as per
the other usage of getparameter().
Increasing the update frequency of the progress bar to 10Hz greatly
improves the visual appearance of the progress bar (at least in my
impression).
Signed-off-by: Tobias Markus <tobias@markus-regensburg.de>
Currently, the progress bar is updated at 5Hz. Because it is often not
updated to 100% when the download is finished and curl exits, the bar
is often "stuck" at 90-something, thus irritating the user.
This patch fixes this by always updating the progress bar (instead of
waiting for 200ms to have elapsed) while the download is finished but
curl has not yet exited. This should not greatly affect performance
because that moment is rather short.
Signed-off-by: Tobias Markus <tobias@markus-regensburg.de>
To avoid the regression when users pass in passwords containing semi-
colons, we now drop the ability to set the login options with the same
options. Support for login options in CURLOPT_USERPWD was added in
7.31.0.
Test case 83 was modified to verify that colons and semi-colons can be
used as part of the password when using -u (CURLOPT_USERPWD).
Bug: http://curl.haxx.se/bug/view.cgi?id=1311
Reported-by: Petr Bahula
Assisted-by: Steve Holme
Signed-off-by: Daniel Stenberg <daniel@haxx.se>
Commit 0db811b6 made some existing config files pass on unexpected
values to libcurl that made it somewhat hard to track down what was
really going on.
This code detects unquoted white spaces in the parameter when parsing a
config file as that would be one symptom and it is generally a bad
syntax anyway.
The "fixed string" function wrongly bumped the "urlnum" counter which
made curl output the total number of URLs wrong when using
{one,two,three} lists in globs.
Reported-by: Michael-O
Bug: http://curl.haxx.se/bug/view.cgi?id=1305
CURL_SSLVERSION_TLSv1_0, CURL_SSLVERSION_TLSv1_1,
CURL_SSLVERSION_TLSv1_2 enum values are added to force exact TLS version
(CURL_SSLVERSION_TLSv1 means TLS 1.x).
axTLS:
axTLS only supports TLS 1.0 and 1.1 but it cannot be set that only one
of these should be used, so we don't allow the new enum values.
darwinssl:
Added support for the new enum values.
SChannel:
Added support for the new enum values.
CyaSSL:
Added support for the new enum values.
Bug: The original CURL_SSLVERSION_TLSv1 value enables only TLS 1.0 (it
did the same before this commit), because CyaSSL cannot be configured to
use TLS 1.0-1.2.
GSKit:
GSKit doesn't seem to support TLS 1.1 and TLS 1.2, so we do not allow
those values.
Bugfix: There was a typo that caused wrong SSL versions to be passed to
GSKit.
NSS:
TLS minor version cannot be set, so we don't allow the new enum values.
QsoSSL:
TLS minor version cannot be set, so we don't allow the new enum values.
OpenSSL:
Added support for the new enum values.
Bugfix: The original CURL_SSLVERSION_TLSv1 value enabled only TLS 1.0,
now it enables 1.0-1.2.
Command-line tool:
Added command line options for the new values.
The option '--bearer' might be slightly ambiguous in name. It doesn't
create any conflict that I am aware of at the moment, however, OAUTH v2
is not the only authentication mechanism which uses "bearer" tokens.
Reported-by: Kyle L. Huff
URL: http://curl.haxx.se/mail/lib-2013-10/0064.html
Added the ability to use an XOAUTH2 bearer token [RFC6750] with POP3 for
authentication using RFC6749 "OAuth 2.0 Authorization Framework".
The bearer token is expected to be valid for the user specified in
conn->user. If CURLOPT_XOAUTH2_BEARER is defined and the connection has
an advertised auth mechanism of "XOAUTH2", the user and access token are
formatted as a base64 encoded string and sent to the server as
"AUTH XOAUTH2 <bearer token>".
Commit 32352ed6ad introduced various DNS options, however, these
would cause curl to exit with CURLE_NOT_BUILT_IN when c-ares wasn't
being used as the backend resolver even if the options weren't set
by the user.
Additionally corrected some minor coding style errors from the same
commit.
Moved the calls to checkpasswd() out of the getparameter() function
which allows for any related arguments to be specified on the command
line before or after --user (and --proxy-user).
For example: --bearer doesn't need to be specified before --user to
prevent curl from asking for an unnecessary password as is the case
with commit e7dcc454c6.
Added the ability to specify an XOAUTH2 bearer token [RFC6750] via the
--bearer option.
Example usage:
curl --url "imaps://imap.gmail.com:993/INBOX/;UID=1" --ssl-reqd
--bearer ya29.AHES6Z...OMfsHYI --user username@example.com
This function is meant to work *exactly* as curl_easy_perform() but will
use the event-based libcurl API internally instead of
curl_multi_perform(). To avoid relying on an actual event-based library
and to not use non-portable functions (like epoll or similar), there's a
rather inefficient emulation layer implemented on top of Curl_poll()
instead.
There's currently some convenience logging done in curl_easy_perform_ev
which helps when tracking down problems. They may be suitable to remove
or change once things seem to be fine enough.
curl has a new --test-event option when built with debug enabled that
then uses curl_easy_perform_ev() instead of curl_easy_perform(). If
built without debug, using --test-event will only output a warning
message.
NOTE: curl_easy_perform_ev() is not part if the public API on purpose.
It is only present in debug builds of libcurl and MUST NOT be considered
stable even then. Use it for libcurl-testing purposes only.
runtests.pl now features an -e command line option that makes it use
--test-event for all curl command line tests. The man page is updated.
The new multiply() function detects range value overflows. 32bit
machines will overflow on a 32bit boundary while 64bit hosts support
ranges up to the full 64 bit range.
Added test 1236 to verify.
Bug: http://curl.haxx.se/bug/view.cgi?id=1267
Reported-by: Will Dietz
A rather big overhaul and cleanup.
1 - curl wouldn't properly detect and reject globbing that ended with an
open brace if there were brackets or braces before it. Like "{}{" or
"[0-1]{"
2 - curl wouldn't properly reject empty lists so that "{}{}" would
result in curl getting (nil) strings in the output.
3 - By using strtoul() instead of sscanf() the code will now detected
over and underflows. It now also better parses the step argument to only
accept positive numbers and only step counters that is smaller than the
delta between the maximum and minimum numbers.
4 - By switching to unsigned longs instead of signed ints for the
counters, the max values for []-ranges are now very large (on 64bit
machines).
5 - Bumped the maximum number of globs in a single URL to 100 (from 10)
6 - Simplified the code somewhat and now it stores fixed strings as
single- entry lists. That's also one of the reasons why I did (5) as now
all strings between "globs" will take a slot in the array.
Added test 1234 and 1235 to verify. Updated test 87.
This commit fixes three separate bug reports.
Bug: http://curl.haxx.se/bug/view.cgi?id=1264
Bug: http://curl.haxx.se/bug/view.cgi?id=1265
Bug: http://curl.haxx.se/bug/view.cgi?id=1266
Reported-by: Will Dietz
Also, use memset() instead of a lame loop.
The previous logic that tried to avoid too many updates were very
ineffective for really fast transfers, as then it could easily end up
doing hundreds of updates per second that would make a significant
impact in transfer performance!
Bug: http://curl.haxx.se/mail/archive-2013-07/0031.html
Reported-by: Marc Doughty
Previously we used __MAC_10_X and __IPHONE_X to mark digest-generating
code that was specific to OS X and iOS. Now we use
__MAC_OS_X_VERSION_MAX_ALLOWED and __IPHONE_OS_VERSION_MAX_ALLOWED
instead of those macros.
Bug: http://sourceforge.net/p/curl/bugs/1255/
Reported by: Edward Rudd
Two fixes:
1. Force output file format to be stream-lf so that partial downloads
can be continued.
This should have minor impact as if the file does not exist, it was
created with stream-lf format. The only time this was an issue is if
there was already an existing file with a different format.
2. Fix file uploads are now fixed.
a. VMS binary files such as ZIP archives are now uploaded
correctly.
b. VMS text files are read once to get the correct size
and then converted to line-feed terminated records as
they are read into curl.
The default VMS text formats do not contain either line-feed or
carriage-return terminated records. Those delimiters are added by the
operating system file read calls if the application requests them.
Bug: http://curl.haxx.se/bug/view.cgi?id=496
We no longer pass our 'bool' data type variables nor constants as
an argument to my_setopt(), instead we use proper 1L or 0L values.
This also fixes macro used to pass string argument for CURLOPT_SSLCERT,
CURLOPT_SSLKEY and CURLOPT_EGDSOCKET using my_setopt_str() instead of
my_setopt().
This also casts enum or int argument data types to long when passed to
my_setopt_enum().
Fixed issue with static build for MSVC2010.
After some investigation I've discovered known issue
http://public.kitware.com/Bug/view.php?id=11240 When .rc file is linked
to static lib it fails with following linker error
LINK : warning LNK4068: /MACHINE not specified; defaulting to X86
file.obj : fatal error LNK1112: module machine type 'x64' conflicts with
target machine type 'X86'
Fix add target property /MACHINE: for MSVC generation.
Also removed old workarounds - it caused errors during msvc build.
Bug: http://curl.haxx.se/mail/lib-2013-07/0046.html
Implement wrappers around strtod to convert the user argument to a
double with sane error checking. Use this to allow --max-time and
--connect-timeout to accept decimal values instead of strictly integers.
The manpage is updated to make mention of this feature and,
additionally, forewarn that the actual timeout of the operation can
vary in its precision (particularly as the value increases in its
decimal precision).
strto* functions happily chomp off leading whitespace, so simply
checking for str[0] can lead to false negatives. Do the full parse and
check the out value instead.
Fix to prevent the options from being displayed when curl requests the
user's password if the following command line is specified:
--user username;options
An extern submits a psect and a global reference to the linker to point
to it. Using "extern int vms_show = 0" also creates a globaldef.
The use of the extern by itself does declare a psect but does not declare
a globalsymbol. It does declare a globalref. But the linker needs one and
only one globaldef or there is an error.
The list of unsafe functions currently consists of sprintf, vsprintf,
strcat, strncat and gets.
Subsequently, some existing code needed updating to avoid warnings on
this.
The this_url pointer wasn't being initialized, so if strdup() would return
null when copying the filename in a metalink file, then hilarity would
ensue during the cleanup phase. This change was brought to you by clang,
which noticed this and raised a warning.
config_h.com is a new file that generates a config.h file based on the
curl_config.h.in file and a quick scan of the configure script. This is
actually a generic procedure that is shared with other VMS packages.
The existing pre-built config-vms.h had over 100 entries that were not
correct and in some cases conflicted with the build options available in
the build_vms.com.
generate_config_vms_h_curl.com is a helper procedure to the
config_h.com. It covers the cases that the generic config_h.com is not
able to figure out, and accepts input from the build_vms.com procedure.
build_curlbuild_h.com is a new file to generate the curlbuild.h file
that Curl is now using when it is using a curl_config.h file.
post-config-vms.h is a new file that is needed to provide VMS specific
definitions, and most of them need to be set before the system header
files are included.
The VMS build procedure is fixed:
1. Fixed to link in the correct HP ssl library.
2. Fixed to detect if HP Kerberos is installed.
3. Fixed to detect if HP LDAP is installed.
4. Fixed to detect if gnv$libzshr is installed.
5. Simplified the input parameter parsing to not use a loop.
6. Warn that 64 bit pointer option support is not complete
in comments.
7. Default to IEEE floating if platform supports it so
resulting libcurl will be compatible with other
open source projects on VMS.
8. Default to LARGEFILE if platform supports it.
9. Default to enable SSL, LDAP, Kerberos, libz
if the libraries are present.
10. Build with exact case global symbols for libcurl.
11. Generate linker option file needed.
12. Compiler list option only commonly needed items.
13. fulllist option for those who really want it.
14. Create debug symbol file on Alpha, IA64.
- document the double-quote and backslash need be escaped if quoting.
- libcurl formdata escape double-quote in filename by backslash.
- curl formparse can parse filename both contains '"' and ',' or ';'.
- curl now can uploading file with ',' or ';' in filename.
Bug: http://curl.haxx.se/bug/view.cgi?id=1171
If the default value for an option taking a long as its value is non
zero, and it is set by zero by a command line option, then that command
line option is not reflected in --libcurl's output. This is because line
520-521 of tool_setopt.c look like:
if(!lval)
skip = TRUE;
An example of a command-line option doing so is the -k option that sets
CURLOPT_SLL_VERIFYPEER and CURLOPT_SSL_VERIFYHOST to 0L, when the
defaults are non-zero.
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
This is a work-around for bug #1180 which is really libcurl's inability
to ignore SIGPIPE in a few cases. With this work-around at least curl
won't suffer from it!
Bug: http://curl.haxx.se/bug/view.cgi?id=1180
Reported by: Lluís Batlle i Rossell
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
BLANK_AT_MAKETIME may be used in our Makefile.am files to blank
LIBS variable used in generated makefile at makefile processing
time. Doing this functionally prevents LIBS from being used for
all link targets in given makefile.
The {MD5,SHA1,SHA256}_Init functions from OpenSSL are called directly
without any wrappers and they return 1 for success, 0 otherwise. Hence,
we have to use the same approach in all the wrapper functions that are
used for the other crypto libraries.
This commit fixes a regression introduced in commit dca8ae5f.
Since automake 1.12.4, the warnings are issued on running automake:
warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Avoid INCLUDES and roll these flags into AM_CPPFLAGS.
Compile tested on:
Ubuntu 10.04 (automake 1:1.11.1-1)
Ubuntu 12.04 (automake 1:1.11.3-1ubuntu2)
Arch Linux (automake 1.12.4)
Previously the Metalink code used Apple's CommonCrypto library only if
curl was built using the --with-darwinssl option. Now we use CommonCrypto
on all Apple operating systems including Tiger or later, or iOS 5 or
later, so you don't need to build --with-darwinssl anymore. Also rolled
out this change to libcurl's md5 code.
The makefile is designed to build against a libmetalink devel package;
therefore is does not matter what will change inside libmetalink.
Add OpenSSL includes and defines for libmetalink-aware OpenSSL builds.
In Metalink v3, the type attribute of url element indicates the
type of the resource the URL points to. It can include URL to the
meta data, such as BitTorrent metainfo file. In Curl, we are not
interested in these meta data URLs. Instead, we are only
interested in the HTTP and FTP URLs. This change filters out
non-HTTP and FTP URLs. If we don't filter out them, it will be
downloaded by curl and hash check will fail if hash is provided
and next URL will be tried. This change will cut this useless
network transfer.
Since Metalink support requires a crypto library for hash functions
and Windows comes with the builtin CryptoAPI, this patch adds that
API as a fallback to the supported crypto libraries.
It is automatically used on Windows if no other library is provided.
Since Windows/MinGW threat 0x1A as the EOF character, reading binary
files which contain that byte does not work using text mode.
The read function will only read until the first 0x1A byte. This
means that the hash is not computed from the whole file and the
final validation check using hash comparision fails.
While validating a new Clang diagnostic (-Wnon-literal-null-conversion -
yes, the name isn't quite correct in this case, but it suffices) I found
a few violations of it in Curl.
1 - str2offset() no longer accepts negative numbers since offsets are by
nature positive.
2 - introduced str2unum() for the command line parser that accepts
numericals which are not supposed to be negative, so that it will
properly complain on apparent bad uses and mistakes.
Bug: http://curl.haxx.se/mail/archive-2012-07/0013.html
Print "parsing (...) OK" only when no warnings are generated. If
no file is found in Metalink, treat it FAILED.
If no digest is provided, print WARNING in parse_metalink().
Also print validating FAILED after download.
These changes make tests 2012 to 2016 pass.
Including headers in response body will break Metalink XML parser.
If it is included in the file described in Metalink XML, hash check
will fail. Therefore, --include should be ignored if --metalink is
used.
The noprogress and isatty in Configurable are global, in a sense
that they persist in one curl invocation. Currently once one
download writes its response data to tty, they are set to FALSE
and they are not restored on successive downloads. This change
first backups the current noprogress and isatty, and restores
them when download does not write its data to tty.
In this change, --metalink option no longer takes argument. If
it is specified, given URIs are processed as Metalink XML file.
If given URIs are remote (e.g., http URI), curl downloads it
first. Regardless URI is local file (e.g., file URI scheme) or
remote, Metalink XML file is not written to local file system and
the received data is fed into Metalink XML parser directly. This
means with --metalink option, filename related options like -O
and -o are ignored.
Usage examples:
$ curl --metalink http://example.org/foo.metalink
This will download foo.metalink and parse it and then download
the URI described there.
$ curl --metalink file://foo.metalink
This will parse local file foo.metalink and then download the URI
described there.
When creating metalink_checksum from metalink_checksum_t, first
check hex digest is valid for the given hash function. We do
this check in the order of digest_aliases so that first good
match will be chosen (strongest hash function available). As a
result, the metalinkfile now only contains at most one
metalink_checksum because other entries are just redundant.
Version number is removed in order to make this info consistent with
how we do it with other MS and Linux system libraries for which we don't
provide this info.
Identifier changed from 'WinSSPI' to 'schannel' given that this is the
actual provider of the SSL/TLS support. libcurl can still be built with
SSPI and without SCHANNEL support.
Added Windows SSPI version information to the curl version string when
SCHANNEL SSL is not enabled, as the version of the library should also
be included when SSPI is used to generate security contexts.
Removed SSPI from the feature list as the features are GSS-Negotiate,
NTLM and SSL depending on the usage of the SSPI library.
Additionally, make hash checking ability mandatory in order to allow metalink
support in curl.
A command line option could be introduced to skip hash checking at runtime,
but the ability to check hashes should always be built-in when providing
metalink support.
Metalink file contains several hash types of checksums, such as
md5, sha-1, sha-256, etc. To deal with these checksums, I created
abstraction layer based on lib/curl_md5.h and
lib/md5.c. Basically, they are almost the same but I changed the
code so that it is not hash type dependent. Currently,
GNUTLS(nettle or gcrypt) and OpenSSL functions are supported.
Checksum checking is done by reopening download file. If there
is an I/O error, the current implementation just prints error
message and does not try next resource.
In this patch, the supported hash types are: md5, sha-1 and sha-256.
Filenames contained in Metalink file can include directory information.
Filenames are unique in Metalink file, taking into account the directory
information. So we need to create the directory hierarchy.
Curl has --create-dirs option, but we create directory hierarchy for
Metalink downloads regardless of the option value.
This patch also put metalink int variable outside of HAVE_LIBMETALINK
guard. This reduces the number of #ifdefs.
This change adds experimental Metalink support to curl.
To enable Metalink support, run configure with --with-libmetalink.
To feed Metalink file to curl, use --metalink option like this:
$ curl -O --metalink foo.metalink
We use libmetalink to parse Metalink files.
To achieve this, first new structure HeaderData is defined to hold
necessary data to perform header-related work. Then tool_header_cb now
receives HeaderData pointer as userdata. All header-related work
(currently, dumping header and Content-Disposition inspection) are done
in this callback function. HeaderData.outs->config is used to determine
whether each work is done.
Unit tests were also updated because after this change, curl code always
sets CURLOPT_HEADERFUNCTION and CURLOPT_HEADERDATA.
Tested with -O -J -D, -O -J -i and -O -J -D -i and all worked fine.
Explicit conversion to 'long' of curl_easy_setopt() third argument for options
CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH given that this is how its bitmasks are
docummented to be used.
By comparing if a different "progress point" is reached or not since the
previous update, the progress function callback for this now avoids many
superfluous screen updates. This has the nice side-effect that it fixes
a problem that causes a second progress meter line.
The second line output happened because when we use the -# progress
meter, we force a newline output after the transfer in the main loop in
curl, but when libcurl calls the progress callback from
curl_easy_cleanup() it would then output the progress display
again. Possibly the naive newline output is wrong but this optimization
was suitable anyway...
Reported by: Daniel Theron
Bug: http://curl.haxx.se/bug/view.cgi?id=3517418
BUILDING_LIBCURL and CURL_STATICLIB are no longer defined in curl_config.h,
configure will generate appropriate conditionals so that mentioned symbols
get defined and used in Makefiles at compilation time
Configuration files such as curl_config.h and all config-*.h no longer exist
nor are generated/copied into 'src' directory, now these only exist in 'lib'
directory from where curl tool sources uses them.
Additionally old src/setup.h has been refactored into src/tool_setup.h which
now pulls lib/setup.h
The possibility of a makefile needing an include path adjustment exists.
By modifying the parameter list for ourWriteOut() and passing the
OutStruct that collects data in tool_operate, we get access to the
remote name that we're writing to. Shell scripters should find this
useful when used in conjuntion with the --remote-header-name option.
This patch improves the output of curl's --libcurl option by
generating code which builds curl_httppost and curl_slist lists, and
uses symbolic names for enum and flag values. Variants of the
my_setopt macro in tool_setopt.h are added in order to pass extra type
information to the code-generation step in tool_setopt.c.
If curl is configured with --disable-libcurl-option then the macros
call curl_easy_setopt directly.
Fix the str2num() function to not check if the input string starts with a
digit, since strtol() supports numbers prepended with '-' (and '+') too.
This makes the --max-redirs option work as documented.
This new option tells curl to not work around a security flaw in the
SSL3 and TLS1.0 protocols. It uses the new libcurl option
CURLOPT_SSL_OPTIONS with the CURLSSLOPT_ALLOW_BEAST bit set.
Use the new library CURLOPT_TCP_KEEPALIVE rather than disabling this via
the sockopt callback. If --keepalive-time is used, apply the value to
CURLOPT_TCP_KEEPIDLE and CURLOPT_TCP_KEEPINTVL.
We want to continue to the next URL to try even on failures returned
from libcurl. This makes -f with ranges still get subsequent URLs even
if occasional ones return error. This was a regression as it used to
work and broke in the 7.23.0 release.
Added test case 1328 to verify the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3481223
Reported by: Juan Barreto
Test case 1315 was added to verify this functionality. When passing in
multiple files to a single -F, the parser would get all confused if one
of the specified files had a custom type= assigned.
Reported by: Colin Hogben
Skip a floating point addition operation when integral part of time difference
is zero. This avoids potential floating point addition rounding problems while
preserving decimal part value.
A regression between 7.22.0 and 7.23.0 -- downloading a file with the
flags -O and -J results in the content being written to stdout if and
only if there was no Content-Disposition header in the http response. If
there is a C-D header with a filename attribute, the output is correctly
written.
Reported by: Dave Reisner
Bug: http://curl.haxx.se/mail/archive-2011-11/0030.html
The progress bar output function would blindly use the terminal width
without bounds checking. When using a very wide terminal that caused a
buffer overflow and segfault.
We now limit the max bar with to 255 columns, and I simplified the code
to avoid an extra snprintf and buffer.
Bug: http://curl.haxx.se/bug/view.cgi?id=3435710
Reported by: Alexey Zakhlestin
As commit 5850cc4808 clarifies, libcurl can deliver header lines that
are longer than CURL_MAX_WRITE_SIZE, only body data is limited to that
size. The curl tool has check (when built debug-enabled) that made the
wrong checks and this new test 1205 verifies that larger headers work.
Previously we required that -S/--show-error was used _after_
-s/--silent. This was slightly confusing since we strive to make
arguments as position independent as possible.
Now, you can use them in any order and the result should still be the
same.
Bug: http://curl.haxx.se/bug/view.cgi?id=3424286
Reported by: Andreas Olsson
Maximum amount of data a header callback is supposed to get in
a single call from libcurl is limited by the lowest value of
CURL_MAX_WRITE_SIZE and CURL_MAX_HTTP_HEADER.
Allow (*curl_write_callback) write callbacks to return
CURL_WRITEFUNC_OUT_OF_MEMORY to properly indicate libcurl of OOM conditions
inside the callback itself.
When we use binary posts and regular ones intermixed on a single command
line, we cannot do strlen() etc on the data to figure out the length
(when inserting '&' and more). We must therefore keep track of the post
data length. Then we also end up setting the libcurl option with the
known size, so that we don't risk that libcurl will do strlen() on the
data.
This has the minor side-effect that --libcurl source codes now always
will use CURLOPT_POSTFIELDSIZE but I don't consider that terribly
damaging.
Bug: http://curl.haxx.se/bug/view.cgi?id=3413181
Reported by: Taneli Vhkangas
Reorder handling of fields to match same order as the one given by current
definition order of 'Configurable' struct fields. Fields currently not handled
marked for further inspection.
Re-enabling MemoryTracking capability on 'src' subdirectory files and torture
tests have uncovered many issues which were going unnoticed in curl tool. So
here we go fixing some of them. Others still remain and should be addressed
ASAP, given that curl tool is used in our test harness also for test server
start verification purposes. There are even non-socket file descriptor leaks.
Feature string literal NTLM_SSO renamed to NTLM_WB.
Preprocessor symbol USE_NTLM_SSO renamed to WINBIND_NTLM_AUTH_ENABLED.
curl's 'long' option 'ntlm-sso' renamed to 'ntlm-wb'.
Fix some comments to make clear that this is actually a NTLM delegation.
As a bonus, this lets our MemoryTracking subsystem track zlib operations.
And also fixes a shortcut some zlib 1.2.x versions took using malloc()
instead of calloc(), which would trigger memory debuggers warnings on
memory being used without having been initialized.
Follow-up to commit 5eb2396cd as that wasn't complete.
At times HEADERFUNCTION+HEADERDATA was set only to have only HEADERDATA
set in the subsequent loop which could cause a NULL to get sent as
userdata to 'header_callback' which wasn't made to handle that.
Now HEADERFUNCTION is explicitly set to NULL if it isn't set to the
callback.
Using this option with an argument being set to one of
none/policy/always instructs libcurl how to deal with GSS
credentials. Or rather how it tells the server that delegation is fine
or not.
Allow configure builds to generate src/config-win32.h
Skip checksrc on src/config-win32.h contents already checked at lib/config-win32.h
Allow multiple -W in checksrc.pl
Allow compilation of libcurl and curl using BSD-style lwIP on Win32.
In order to compile libcurl and curl with this support it is necessary
to edit files lib/config-win32.h and src/config-win32.h and uncomment
a line to make definition of preprocessor symbol USE_LWIPSOCK visible.
Afterwards you can compile as usual.
In order to use compiled library with BSD-style lwIP TCP/IP stack in
your program it is mandatory that you include lwIP header file <lwip/opt.h>
before including <curl/curl.h> or <curl/multi.h>
Compilation has been verified with lwIP 1.4.0 and contrib-1.4.0 from:
http://download.savannah.gnu.org/releases/lwip/lwip-1.4.0.ziphttp://download.savannah.gnu.org/releases/lwip/contrib-1.4.0.zip
Have fun!
Content-disposition headers can provide file names with semicolons which
previously would be cut off at that point.
Added test case 1311 and 1312 to verify -J.
Bug: http://curl.haxx.se/bug/view.cgi?id=3375603
Reported by: Peter Hjalmarsson
First, the -J/--remote-header-name was wrongly sorted in the --help
output as pointed out in bug report #3349271.
Then, I changed the format of the texts to follow the man page better in
that it now uses "-A, --long" intead of "-A/--long". I also made all
additional arguments get written as in "-A, --long FILENAME" instead of
the previous "<filename>" style.
Reported by: Herve Amblard
Bug: http://curl.haxx.se/bug/view.cgi?id=3349271
Improved library search by check_function_exists_concat() macro:
it does not revert the list of libraries any more.
Improved OpenSSL library search: first find zlib, then search for
openssl libraries that may depend on zlib.
For Unix: openssl libraries can now be detected in nonstandard
locations. Supply CMAKE_LIBRARY_PATH to CMake on command line.
Added installation capability (very basic one yet).
The make target checksrc now works in the root makefile and in both the
src and lib directories.
It is also run automatically on "all" if configure --enable-debug was
used.
For now we directly import the Idn* symbols with the linker;
an upcoming release of OWC will have these added to the import
lib normaliz.lib, and prototypes are added to winnnls.h.
It is now possible to use any combination of features without
having to 1st add makefile targets to the main makefile. The
main makefile now passes the 'mingw32-feat1-feat2' as var CFG,
and the ./[lib|src]/Makefile.m32 parses the CFG var to determine
the features to be enabled.
Added CURLOPT_TRANSFER_ENCODING as the option to set to request Transfer
Encoding in HTTP requests (if built zlib enabled). I also renamed
CURLOPT_ENCODING to CURLOPT_ACCEPT_ENCODING (while keeping the old name
around) to reduce the confusion when we have to encoding options for
HTTP.
--tr-encoding is now the new command line option for curl to request
this, and thus I updated the test cases accordingly.
* Rename the object object directory from 'objs' to 'BCC_obj' to be in
sync with my previous patch for lib/Makefile.b32.
* Turn off these warnings to keep the build totally silent (with CBuilder-6
that is).
-w-inl 8026 Functions X are not expanded inline.
-w-pia 8060 Possibly incorrect assignment
-w-pin 8061 Initialization is only partially bracketed
(same added in src/Makefile.b32)
* $(MKDIR) and $(RMDIR) have been replaced with the shell-commands 'md'
and 'rd'. When having MingW/Msys programs 'mkdir.exe' and 'rmdir.exe' in
$PATH, this confuses Borland's make and the result (the cleaning etc.) would
not be as expected.
* Removed the preprocessing step; no need for PP_CMD and the .int files.
curl.exe builds fine w/o and the makefile gets simpler.
* Added a target for creating a compressed hugehelp.c if WITH_ZLIB is defined.
It assumes groff, gzip and perl is available if such an "advanced" users
requests it. Okay? BTW. My groff and Perl needs unix-slashes ('/').
Other perls should handle both forms ('/' and '\').
All C and H files now (should) feature the proper project curl source
code header, which includes basic info, a copyright statement and some
basic disclaimers.
This enables people to specify a path to the netrc file to use.
The new option override --netrc if both are present. However it
does follow --netrc-optional if specified.
Since the feature requires support for TCP_KEEPIDLE and TCP_KEEPINTVL to
function as documented, it now warns if that support is missing when the
option is used.
... to not make the connection between the tool and the libcurl used
tighter than necessary, the tlsauth options are now always present but
if the used libcurl doesn't have TLSAUTH support it will return failure.
Also, replaced strncmp() with strequal to get case insensitive matching.
Instead of reopening the downloaded file, fsetxattr uses the (already
open) file descriptor to attach extended attributes. This makes the
procedure more robust against errors caused by moved or deleted files.
CURLOPT_RESOLVE is a new option that sends along a curl_slist with
name:port:address sets that will populate the DNS cache with entries so
that request can be "fooled" to use another host than what otherwise
would've been used. Previously we've encouraged the use of Host: for
that when dealing with HTTP, but this new feature has the added bonus
that it allows the name from the URL to be used for TLS SNI and server
certificate name checks as well.
This is a first change. Surely more will follow to make it decent.
setxattr is a glibc call to set extended attributes, so configure now
checks for it and the code is adapted to only build when the
functionality is present.
It is often convinient to track back the source of a once downloaded
file; this patch makes curl store the source URL and other metadata
alongside the retrieved file by using the extended attributes (if
supported by the file system and enabled by --xattr).
These haven't worked in at least 8 years due to missing source
files, and most active RiscOS developers these days apparently
cross-compile anyway.
Signed-off-by: James Bursa <james@zamez.org>
Some options, such as the automatic decompression and some SSL related
ones now will bail out if the underlying libcurl doesn't have support
for the particular feature needed.
If the filename contains a backslash, only use filename portion. The
idea is that even systems that don't handle backslashes as path
separators probably want that path removed for convenience.
This flaw is considered a security problem, see the curl security
vulnerability http://curl.haxx.se/docs/adv_20101013.html
Having an open brace without a closing brace caused a segfault.
Having a closing brace too many caused a silent error to occur, which
caused curl to bail out and return an error code but no error message
was shown. It does now!
All error message outputs no longer wrongly get _two_ newlines written
after the error message.
Reported by: Vlad Ureche
Bug: http://curl.haxx.se/bug/view.cgi?id=3083942
Renamed SDK_* to NDK_*; made NDK_* defines overwriteable from
environment; removed now obsolete YACC macro;
moved some curl_config.h defines to IPv6 section since they
are only needed when IPv6 is enabled - this makes libcurl compile
with older NDKs too which were not IPv6-aware.
