- Enable protocol family logic for IPv6 resolves even when support
for synthesized addresses is enabled.
This is a follow up to the parent commit that added support for
synthesized IPv6 addresses from IPv4 on iOS/OS X. The protocol family
logic needed for IPv6 was inadvertently excluded if support for
synthesized addresses was enabled.
Bug: https://github.com/curl/curl/issues/863
Ref: https://github.com/curl/curl/pull/866
Ref: https://github.com/curl/curl/pull/867
Use getaddrinfo() to resolve the IPv4 address literal on iOS/Mac OS X.
If the current network interface doesn’t support IPv4, but supports
IPv6, NAT64, and DNS64.
Closes#866Fixes#863
Calling QueryContextAttributes with SECPKG_ATTR_APPLICATION_PROTOCOL
fails on Windows < 8.1 so we need to disable ALPN on these OS versions.
Inspiration provide by: Daniel Seither
Closes#848Fixes#840
- Change the parser to not require a minor version for HTTP/2.
HTTP/2 connection reuse broke when we changed from HTTP/2.0 to HTTP/2
in 8243a95 because the parser still expected a minor version.
Bug: https://github.com/curl/curl/issues/855
Reported-by: Andrew Robbins, Frank Gevaerts
Sessionid cache management is inseparable from managing individual
session lifetimes. E.g. for reference-counted sessions (like those in
SChannel and OpenSSL engines) every session addition and removal
should be accompanied with refcount increment and decrement
respectively. Failing to do so synchronously leads to a race condition
that causes symptoms like use-after-free and memory corruption.
This commit:
- makes existing session cache locking explicit, thus allowing
individual engines to manage lock's scope.
- fixes OpenSSL and SChannel engines by putting refcount management
inside this lock's scope in relevant places.
- adds these explicit locking calls to other engines that use
sessionid cache to accommodate for this change. Note, however,
that it is unknown whether any of these engines could also have
this race.
Bug: https://github.com/curl/curl/issues/815Fixes#815Closes#847
Mostly in order to support broken web sites that redirect to broken URLs
that are accepted by browsers.
Browsers are typically even more leniant than this as the WHATWG URL
spec they should allow an _infinite_ amount. I tested 8000 slashes with
Firefox and it just worked.
Added test case 1141, 1142 and 1143 to verify the new parser.
Closes#791
Regression from the previous *printf() rearrangements, this file missed to
include the correct header to make sure snprintf() works universally.
Reported-by: Moti Avrahami
Bug: https://curl.haxx.se/mail/lib-2016-05/0196.html
While compiling lib/curl_multibyte.c with '-DUSE_WIN32_IDN' etc. I was
getting:
f:\mingw32\src\inet\curl\lib\memdebug.h(38): error C2054: expected '('
to follow 'CURL_EXTERN'
f:\mingw32\src\inet\curl\lib\memdebug.h(38): error C2085:
'curl_domalloc': not in formal parameter list
...as otherwise the TLS libs will skip the CN/SAN check and just allow
connection to any server. curl previously skipped this function when SNI
wasn't used or when connecting to an IP address specified host.
CVE-2016-3739
Bug: https://curl.haxx.se/docs/adv_20160518A.html
Reported-by: Moti Avrahami
CID 1024412: Memory - illegal accesses (OVERRUN). Claimed to happen when
we run over 'workend' but the condition says <= workend and for all I
can see it should be safe. Compensating for the warning by adding a byte
margin in the buffer.
Also, removed the extra brace level indentation in the code and made it
so that 'workend' is only assigned once within the function.
The proper FTP wildcard init is now more properly done in Curl_pretransfer()
and the corresponding cleanup in Curl_close().
The previous place of init/cleanup code made the internal pointer to be NULL
when this feature was used with the multi_socket() API, as it was made within
the curl_multi_perform() function.
Reported-by: Jonathan Cardoso Machado
Fixes#800
Prior to this change a width arg could be erroneously output, and also
width and precision args could not be used together without crashing.
"%0*d%s", 2, 9, "foo"
Before: "092"
After: "09foo"
"%*.*s", 5, 2, "foo"
Before: crash
After: " fo"
Test 557 is updated to verify this and more
The new way of disabling certificate verification doesn't work on
Mountain Lion (OS X 10.8) so we need to use the old way in that version
too. I've tested this solution on versions 10.7.5, 10.8, 10.9, 10.10.2
and 10.11.
Closes#802
curl's representation of HTTP/2 responses involves transforming the
response to a format that is similar to HTTP/1.1. Prior to this change,
curl would do this by separating header names and values with only a
colon, without introducing a space after the colon.
While this is technically a valid way to represent a HTTP/1.1 header
block, it is much more common to see a space following the colon. This
change introduces that space, to ensure that incautious tools are safely
able to parse the header block.
This also ensures that the difference between the HTTP/1.1 and HTTP/2
response layout is as minimal as possible.
Bug: https://github.com/curl/curl/issues/797Closes#798Fixes#797
... introduced in curl-7_48_0-293-g2968c83:
Error: COMPILER_WARNING:
lib/vtls/openssl.c: scope_hint: In function ‘Curl_ossl_check_cxn’
lib/vtls/openssl.c:767:15: warning: conversion to ‘int’ from ‘ssize_t’
may alter its value [-Wconversion]
- In the case of recv error, limit returning 'connection still in place'
to EINPROGRESS, EAGAIN and EWOULDBLOCK.
This is an improvement on the parent commit which changed the openssl
connection check to use recv MSG_PEEK instead of SSL_peek.
Ref: https://github.com/curl/curl/commit/856baf5#comments
Calling SSL_peek can cause bytes to be read from the raw socket which in
turn can upset the select machinery that determines whether there's data
available on the socket.
Since Curl_ossl_check_cxn only tries to determine whether the socket is
alive and doesn't actually need to see the bytes SSL_peek seems like
the wrong function to call.
We're able to occasionally reproduce a connect timeout due to this
bug. What happens is that Curl doesn't know to call SSL_connect again
after the peek happens since data is buffered in the SSL buffer and thus
select won't fire for this socket.
Closes#795
Only protocols that actually have a protocol registered for ALPN and NPN
should try to get that negotiated in the TLS handshake. That is only
HTTPS (well, http/1.1 and http/2) right now. Previously ALPN and NPN
would wrongly be used in all handshakes if libcurl was built with it
enabled.
Reported-by: Jay Satiro
Fixes#789
Sometimes, in systems with both ipv4 and ipv6 addresses but where the
network doesn't support ipv6, Curl_is_connected returns an error
(intermittently) even if the ipv4 socket connects successfully.
This happens because there's a for-loop that iterates on the sockets but
the error variable is not resetted when the ipv4 is checked and is ok.
This patch fixes this problem by setting error to 0 when checking the
second socket and not having a result yet.
Fixes#794
curl_printf.h defines printf to curl_mprintf, etc. This can cause
problems with external headers which may use
__attribute__((format(printf, ...))) markers etc.
To avoid that they cause problems with system includes, we include
curl_printf.h after any system headers. That makes the three last
headers to always be, and we keep them in this order:
curl_printf.h
curl_memory.h
memdebug.h
None of them include system headers, they all do funny #defines.
Reported-by: David Benjamin
Fixes#743
Mostly because they're not needed, because memdebug.h is always included
last of all headers so the others already included the correct ones.
But also, starting now we don't want this to accidentally include any
system headers, as the header included _before_ this header may add
defines and other fun stuff that we won't want used in system includes.
Previously, connections were closed immediately before the user had a
chance to extract the socket when the proxy required Negotiate
authentication.
This regression was brought in with the security fix in commit
79b9d5f1a4Closes#655
WinSock destroys recv() buffer if send() is failed. As result - server
response may be lost if server sent it while curl is still sending
request. This behavior noticeable on HTTP server short replies if
libcurl use several send() for request (usually for POST request).
To workaround this problem, libcurl use recv() before every send() and
keeps received data in intermediate buffer for further processing.
Fixes: #657Closes: #668
This commit fixes a Clang warning introduced in curl-7_48_0-190-g8f72b13:
Error: CLANG_WARNING:
lib/connect.c:1120:11: warning: The right operand of '==' is a garbage value
1118| }
1119|
1120|-> if(-1 == rc)
1121| error = SOCKERRNO;
1122| }
... but output non-stripped version of the line, even if that then can
make the script identify the wrong position in the line at
times. Showing the line stripped (ie without comments) is just too
surprising.
- Error if a header line is larger than supported.
- Warn if cumulative header line length may be larger than supported.
- Allow spaces when parsing the path component.
- Make sure each header line ends in \r\n. This fixes an out of bounds.
- Disallow header continuation lines until we decide what to do.
Ref: https://github.com/curl/curl/issues/659
Ref: https://github.com/curl/curl/pull/663
This commit ensures that streams which was closed in on_stream_close
callback gets passed to http2_handle_stream_close. Previously, this
might not happen. To achieve this, we increment drain property to
forcibly call recv function for that stream.
To more accurately check that we have no pending event before shutting
down HTTP/2 session, we sum up drain property into
http_conn.drain_total. We only shutdown session if that value is 0.
With this commit, when stream was closed before reading response
header fields, error code CURLE_HTTP2_STREAM is returned even if
HTTP/2 level error is NO_ERROR. This signals the upper layer that
stream was closed by error just like TCP connection close in HTTP/1.
Ref: https://github.com/curl/curl/issues/659
Ref: https://github.com/curl/curl/pull/663
This commit ensures that data from network are processed before HTTP/2
session is terminated. This is achieved by pausing nghttp2 whenever
different stream than current easy handle receives data.
This commit also fixes the bug that sometimes processing hangs when
multiple HTTP/2 streams are multiplexed.
Ref: https://github.com/curl/curl/issues/659
Ref: https://github.com/curl/curl/pull/663
Previously, when a stream was closed with other than NGHTTP2_NO_ERROR
by RST_STREAM, underlying TCP connection was dropped. This is
undesirable since there may be other streams multiplexed and they are
very much fine. This change introduce new error code
CURLE_HTTP2_STREAM, which indicates stream error that only affects the
relevant stream, and connection should be kept open. The existing
CURLE_HTTP2 means connection error in general.
Ref: https://github.com/curl/curl/issues/659
Ref: https://github.com/curl/curl/pull/663
... but ignore EAGAIN if the stream has ended so that we don't end up in
a loop. This is a follow-up to c8ab613 in order to avoid the problem
d261652 was made to fix.
Reported-by: Jay Satiro
Clues-provided-by: Tatsuhiro Tsujikawa
Discussed in #750
As these two options provide identical functionality, the former for
SOCK5 proxies and the latter for HTTP proxies, merged the two options
together.
As such CURLOPT_SOCKS5_GSSAPI_SERVICE is marked as deprecated as of
7.49.0.
Calculate the service name and proxy service names locally, rather than
in url.c which will allow for us to support overriding the service name
for other protocols such as FTP, IMAP, POP3 and SMTP.
It turns out the google GFE HTTP/2 servers send a PING frame immediately
after a stream ends and its last DATA has been received by curl. So if
we don't drain that from the socket, it makes the socket readable in
subsequent checks and libcurl then (wrongly) assumes the connection is
dead when trying to reuse the connection.
Reported-by: Joonas Kuorilehto
Discussed in #750
Although this should never happen due to the relationship between the
'mech' and 'resp' variables, and the way they are allocated together,
it does cause problems for code analysis tools:
V595 The 'mech' pointer was utilized before it was verified against
nullptr. Check lines: 376, 381. curl_sasl.c 376
Bug: https://github.com/curl/curl/issues/745
Reported-by: Alexis La Goutte
This wouldn't cause a problem because of the way the function is called,
but prior to this change, we were processing the challenge message when
the credentials were NULL rather than when the challenge message was
populated.
This also brings this part of the Kerberos 5 code in line with the
Negotiate code.
Although mutual authentication is currently turned off and can only be
enabled by changing libcurl source code, authentication using Kerberos
5 has been broken since commit 79543caf90 in this use case.
This wouldn't cause a problem because of the way the function is called,
but prior to this change, we were processing the challenge message when
the credentials were NULL rather than when the challenge message was
populated.
This also brings this part of the Kerberos 5 code in line with the
Negotiate code.
Prior to this change, we were generating the output token when the
credentials were NULL rather than when the output token was NULL.
This also brings this part of the Kerberos 5 code in line with the
Negotiate code.
Prior to this change, we were generating the SPN in the SSPI code when
the credentials were NULL and in the GSS-API code when the context was
empty. It is better to decouple the SPN generation from these checks
and only generate it when the SPN itself is NULL.
This also brings this part of the Kerberos 5 code in line with the
Negotiate code.
It offers extra info from nghttp2 in certain error cases. Like for
example when trying prior-knowledge http2 on a server that doesn't speak
http2 at all. The error message is passed on as a verbose message to
libcurl.
Discussed in #722
The error callback was added in nghttp2 1.9.0
For consistency with the spnego and oauth2 code moved the setting of
the host name outside of the Curl_auth_create_gssapi_user_messag()
function.
This will allow us to more easily override it in the future.
I had accidentally used the proxy server name for the host and the host
server name for the proxy in commit ad5e9bfd5d and 6d6f9ca1d9. Whilst
Windows SSPI was quite happy with this, GSS-API wasn't.
Thanks-to: Michael Osipov
When an upload is done, there are two places where that can be detected
and only one of them would rewind the input stream - which sometimes is
necessary for example when doing NTLM HTTP POSTs and more.
This could then end up libcurl hanging.
Figured-out-by: Isaac Boukris
Reported-by: Anatol Belski
Fixes#741
So that we only do the extra typedefs in curl_memory.h when we really
need to and avoid double typedefs.
follow-up commit to 7218b52c49
Thanks-to: Steve Holme
The define is not in our name space and is therefore not protected by
our API promises.
It was only really used by libcurl internals but was mostly erased from
there already in 8aabbf5 (March 2015). This is supposedly the final
death blow to that define from everywhere.
As a side-effect, making sure _MPRINTF_REPLACE is gone and not used, I
made the lib tests in tests/libtest/ use curl_printf.h for its redefine
magic and then subsequently the use of sprintf() got banned in the tests
as well (as it is in libcurl internals) and I then replaced them all
with snprintf().
In the unlikely event that any users is actually using this define and
gets sad by this change, it is very easily copied to the user's own
code.
Supports HTTP/2 over clear TCP
- Optimize switching to HTTP/2 by removing calls to init and setup
before switching. Switching will eventually call setup and setup calls
init.
- Supports new version to “force” the use of HTTP/2 over clean TCP
- Add common line parameter “--http2-prior-knowledge” to the Curl
command line tool.
The code copied one byte from a 32bit integer, which works fine as long
as the byte order is the same. Not a fine assumption. Reported by PVS
Studio.
Reported-by: Alexis La Goutte
When compiling with OpenSSL 1.1.0 (so that the HAVE_X509_GET0_SIGNATURE
&& HAVE_X509_GET0_EXTENSIONS pre-processor block is active), Visual C++
14 complains:
warning C4701: potentially uninitialized local variable 'palg' used
warning C4701: potentially uninitialized local variable 'psig' used
Also display the GSS_C_GSS_CODE (major code) when specified instead of
only GSS_C_MECH_CODE (minor code).
In addition, the old code was printing a colon twice after the prefix
and also miscalculated the length of the buffer in between calls to
gss_display_status (the length of ": " was missing).
Also, gss_buffer is not guaranteed to be NULL terminated and thus need
to restrict reading by its length.
Closes#738
Since commit a5aec58 the handler schemes need to match for the
connections to be reused and for HTTP/2 multiplexing to work, reusing
connections is very important!
Closes#736
Renamed the header and source files for this module as they are HTTP
specific and as such, they should use the naming convention as other
HTTP authentication source files do - this revert commit 260ee6b7bf.
Note: We could also rename curl_ntlm_wb.[c|h], however, the Winbind
code needs separating from the HTTP protocol and migrating into the
vauth directory, thus adding support for Winbind to the SASL based
protocols such as IMAP, POP3 and SMTP.
libidn's tld_check_lz returns an error offset of the first character
that it failed to process, however that offset is not a byte offset and
may not even be in the locale encoding therefore we can't use it to show
the user the character that failed to process.
Bug: https://github.com/curl/curl/issues/731
Reported-by: Karlson2k
As the GSS-API and SSPI based source files are no longer library/API
specific, following the extraction of that authentication code to the
vauth directory, combine these files rather than maintain two separate
versions.
Not picked up by checksrc or Visual Studio but my own code review, this
would haven broken Intel based Unix builds - Perhaps I should learn to
type on my laptop's keyboard before committing!
Updated the makefiles and Visual Studio project files to support moving
the authentication code to the new lib/vauth directory that was started
in commit 0d04e859e1.
warning C4701: potentially uninitialized local variable 'size' used
Technically this can't happen, as the usage of 'size' is protected by
'if(parsed)' and 'parsed' is only set after 'size' has been parsed.
Anyway, lets keep the compiler happy.
formdata.c:390: warning: cast from pointer to integer of different size
Introduced in commit ca5f9341ef this happens because a char*, which is
32-bits wide in 32-bit land, is being cast to a curl_off_t which is
64-bits wide where 64-bit integers are supported by the compiler.
This doesn't happen in 64-bit land as a pointer is the same size as a
curl_off_t.
This fix doesn't address the fact that a 64-bit value cannot be used
for CURLFORM_CONTENTLEN when set in a form array and compiled on a
32-bit platforms, it does at least suppress the compilation warning.
... to allow users to see which specfic wildcard that matched when such
is used.
Also minor logic cleanup to simplify the code, and I removed all tabs
from verbose strings.
Simplify the code by using a single entry that looks for a socket in the
socket hash. As indicated in #712, the code looked for CURL_SOCKET_BAD
at some point and that is ineffective/wrong and this makes it easier to
avoid that.
... as it implies we need to check for that on all the other variable
references as well (as Coverity otherwise warns us for missing NULL
checks), and we're alredy making sure that the pointer is never NULL.
RFC 6265 section 4.1.1 spells out that the first name/value pair in the
header is the actual cookie name and content, while the following are
the parameters.
libcurl previously had a more liberal approach which causes significant
problems when introducing new cookie parameters, like the suggested new
cookie priority draft.
The previous logic read all n/v pairs from left-to-right and the first
name used that wassn't a known parameter name would be used as the
cookie name, thus accepting "Set-Cookie: Max-Age=2; person=daniel" to be
a cookie named 'person' while an RFC 6265 compliant parser should
consider that to be a cookie named 'Max-Age' with an (unknown) parameter
'person'.
Fixes#709
Such a return value isn't documented but could still happen, and the
curl tool code checks for it. It would happen when the underlying
Curl_poll() function returns an error. Starting now we mask that error
as a user of curl_multi_wait() would have no way to handle it anyway.
Reported-by: Jay Satiro
Closes#707
I got a crash with this stack:
curl/lib/url.c:2873 (Curl_removeHandleFromPipeline)
curl/lib/url.c:2919 (Curl_getoff_all_pipelines)
curl/lib/multi.c:561 (curl_multi_remove_handle)
curl/lib/url.c:415 (Curl_close)
curl/lib/easy.c:859 (curl_easy_cleanup)
Closes#704
Prior to this change when a single protocol CURL_SSLVERSION_ was
specified by the user that version was set only as the minimum version
but not as the maximum version as well.
In makefile.m32, option -ssh2 (libssh2) automatically implied -ssl
(OpenSSL) option, with no way to override it with -winssl. Since both
libssh2 and curl support using Windows's built-in SSL backend, modify
the logic to allow that combination.
Prior to this change cookies with an expiry date that failed parsing
and were converted to session cookies could be purged in remove_expired.
Bug: https://github.com/curl/curl/issues/697
Reported-by: Seth Mos
Prevent a crash if 2 (or more) requests are made to the same host and
pipelining is enabled and the connection does not complete.
Bug: https://github.com/curl/curl/pull/690
Some systems have special files that report as 0 bytes big, but still
contain data that can be read (for example /proc/cpuinfo on
Linux). Starting now, a zero byte size is considered "unknown" size and
will be read as far as possible anyway.
Reported-by: Jesse Tan
Closes#681
... as when pipelining is used, we read things into a unified buffer and
we don't do that with HTTP/2. This could then easily make programs that
set CURLMOPT_PIPELINING = CURLPIPE_HTTP1|CURLPIPE_MULTIPLEX to get data
intermixed or plain broken between HTTP/2 streams.
Reported-by: Anders Bakken
The two options are almost the same, except in the case of OpenSSL:
CURLINFO_TLS_SESSION OpenSSL session internals is SSL_CTX *.
CURLINFO_TLS_SSL_PTR OpenSSL session internals is SSL *.
For backwards compatibility we couldn't modify CURLINFO_TLS_SESSION to
return an SSL pointer for OpenSSL.
Also, add support for the 'internals' member to point to SSL object for
the other backends axTLS, PolarSSL, Secure Channel, Secure Transport and
wolfSSL.
Bug: https://github.com/curl/curl/issues/234
Reported-by: dkjjr89@users.noreply.github.com
Bug: https://curl.haxx.se/mail/lib-2015-09/0127.html
Reported-by: Michael König
The internal Curl_done() function uses Curl_expire() at times and that
uses the timeout list. Better clean up the list once we're done using
it. This caused a segfault.
Reported-by: 蔡文凱
Bug: https://curl.haxx.se/mail/lib-2016-02/0097.html
- Add tests.
- Add an example to CURLOPT_TFTP_NO_OPTIONS.3.
- Add --tftp-no-options to expose CURLOPT_TFTP_NO_OPTIONS.
Bug: https://github.com/curl/curl/issues/481
Some TFTP server implementations ignore the "TFTP Option extension"
(RFC 1782-1784, 2347-2349), or implement it in a flawed way, causing
problems with libcurl. Another switch for curl_easy_setopt
"CURLOPT_TFTP_NO_OPTIONS" is introduced which prevents libcurl from
sending TFTP option requests to a server, avoiding many problems caused
by faulty implementations.
Bug: https://github.com/curl/curl/issues/481
If any parameter in a HTTP DIGEST challenge message is present multiple
times, memory allocated for all but the last entry should be freed.
Bug: https://github.com/curl/curl/pull/667
