The --retry logic does retry HTTP when some specific response codes are
returned, but because the -f option sets the CURLOPT_FAILONERROR to
libcurl, the return codes are different for such situations and then the
curl tool failed to consider it for retrying.
Reported by: Mike Power
Bug: http://curl.haxx.se/bug/view.cgi?id=3037362
lib/Makefile.Watcom works fine already, for src/Makefile.Watcom we
need first to tweak src/Makefile.inc a bit - therefore the handtweaked
list still exists for now.
- make both libcurl and curl makefiles use register calling convention
(previously libcurl had stack calling convention).
- added include paths to the Watcom headers so its no longer required
to set the environment vars for this.
- added -wcd=201 to supress compiler warning about unreachable code.
- use macros for all tools, and removed dependency on GNU tools like rm.
- make ipv6 and debug builds controlable via env vars and so make them
optional instead of default.
- commented WINLDAPAPI and WINBERAPI since they broke with OW 1.8, and
it seems they're not needed (anymore?).
- added rule for hugehelp.c.cvs so that it will be created when not
already exist - this is required for building from a release tarball
since there we have no hugehelp.c.cvs, thus compilation broke.
- removed C_ARG creation from lib/Makefile.Watcom and use CFLAGS
directly as done too in src/Makefile.Watcom - this has the benefit
that we will see all active cflags and defines during compile.
- added LINK-ARG to src/Makefile.Watcom in order to better control
linker input.
- a couple of other minor makefile tweaks here and there ...
- added largefile support for Watcom builds to config-win32.h. Not yet
tested if it really works, but should since Win32 supports it.
- added loaddll stuff to speed up builds if supported.
This passes -Werror to gcc when building curl and libcurl,
allowing easy dection of compile warnings.
Signed-off-by: Ben Greear <greearb@candelatech.com>
The --remote-header-name option for the command-line tool assumes that
everything beyond the filename= field is part of the filename, but that
might not always be the case, for example:
Content-Disposition: attachment; filename=file.txt; modification-date=...
This fix chops the filename off at the next semicolon, if there is one.
When getting multiple URLs, curl didn't properly reset the byte counter
after a successful transfer so if the subsequent transfer failed it
would wrongly use the previous byte counter and behave badly (segfault)
because of that. The code assumes that the byte counter and the 'stream'
pointer is well in synch.
Reported by: Jon Sargeant
Bug: http://curl.haxx.se/bug/view.cgi?id=3028241
Since uploading from stdin is very likely to not work with anyauth and
its multi-phase probing for what authentication to actually use, alert
the user about it. Multi-phase negotiate almost certainly will involve
sending data and thus libcurl will need to rewind the stream to send
again, and it cannot do that with stdin.
I think the [REMARK] and commented function calls cluttered the code a
bit too much and made the generated code ugly to read. Now we instead
track the remarks one specially and just lists them at the end of the
generated code more as additional information.
And additionally, don't show function or object pointers actual value
since they make no sense to anyone. Show 'functionpointer' and
'objectpointer' instead.
In the generated code --libcurl makes, all calls to curl_easy_setopt()
that use *_LARGE options now have the value typecasted to curl_off_t, so
that it works correctly for 32bit systems with 64bit curl_off_t type.
curl didn't properly handle escaping characters in a URL with the use of
backslash. It did an attempt, but that failed as reported in bug
3022551. The described example was using the URL
"http://example.com?{AB,C\,D}".
I've now removed the special-handling of letters following the backslash
and I also removed the bad extra check that triggered this particular
bug.
Bug: http://curl.haxx.se/bug/view.cgi?id=3022551
Reported by: Jon Sargeant
The main change is to allow input from user-specified methods,
when they are specified with CURLOPT_READFUNCTION.
All calls to fflush(stdout) in telnet.c were removed, which makes
using 'curl telnet://foo.com' painful since prompts and other data
are not always returned to the user promptly. Use
'curl --no-buffer telnet://foo.com' instead. In general,
the user should have their CURLOPT_WRITEFUNCTION do a fflush
for interactive use.
Also fix assumption that reading from stdin never returns < 0.
Old code could crash in that case.
Call progress functions in telnet main loop.
Signed-off-by: Ben Greear <greearb@candelatech.com>
The feature that uses the file name given in a
Content-disposition: header didn't properly skip trailing
carriage returns and linefeed characters from the end of the file
name when it was given without quotes.
(http://curl.haxx.se/bug/view.cgi?id=2958074) that curl on Windows with
option --trace-time did not use local time when timestamping trace lines.
This could also happen on other systems depending on time souurce.
versions --ftp-ssl and --ftp-ssl-reqd as these options are now used to
control SSL/TLS for IMAP, POP3 and SMTP as well in addition to FTP. The old
option names are still working but the new ones are the prefered ones
(listed and documented).
command is a special "hack" used by the drftpd server, but even though it is
a custom extension I've deemed it fine to add to libcurl since this server
seems to survive and people keep using it and want libcurl to support
it. The new libcurl option is named CURLOPT_FTP_USE_PRET, and it is also
usable from the curl tool with --ftp-pret. Using this option on a server
that doesn't support this command will make libcurl fail.
on FTP errors in the transient 5xx range. Transient FTP errors are in the
4xx range. The code itself only tried on 5xx errors that occured _at login_.
Now the retry code retries on all FTP transfer failures that ended with a
4xx response.
(http://curl.haxx.se/bug/view.cgi?id=2911279)
rework patch that now integrates TFTP properly into libcurl so that it can
be used non-blocking with the multi interface and more. BLKSIZE also works.
The --tftp-blksize option was added to allow setting the TFTP BLKSIZE from
the command line.
though it failed to write a very small download to disk (done in a single
fwrite call). It turned out to be because fwrite() returned success, but
there was insufficient error-checking for the fclose() call which tricked
curl to believe things were fine.
by user 'koresh' introduced the --crlfile option to curl, which makes curl
tell libcurl about a file with CRL (certificate revocation list) data to
read.
read stdin in a non-blocking fashion. This also brings back -T- (minus) to
the previous blocking behavior since it could break stuff for people at
times.
This allows curl(1) to be used as a client-side tunnel for arbitrary stream
protocols by abusing chunked transfer encoding in both the HTTP request and
HTTP response. This requires server support for sending a response while a
request is still being read, of course.
If attempting to read from stdin returns EAGAIN, then we pause our sender.
This leaves curl to attempt to read from the socket while reading from stdin
(and thus sending) is paused.
With the curl memory tracking feature decoupled from the debug build feature,
CURLDEBUG and DEBUGBUILD preprocessor symbol definitions are used as follows:
CURLDEBUG used for curl debug memory tracking specific code (--enable-curldebug)
DEBUGBUILD used for debug enabled specific code (--enable-debug)
Chen pointed out how curl couldn't upload with resume when reading from a
pipe.
This ended up with the introduction of a new return code for the
CURLOPT_SEEKFUNCTION callback that basically says that the seek failed but
that libcurl may try to resolve the situation anyway. In our case this means
libcurl will attempt to instead read that much data from the stream instead
of seeking and that way curl can now upload with resume when data is read
from a stream!
OBJECTPOINT options. Now we've introduced a new function - my_setopt_str -
within the app for setting plain string options to avoid the risk of this
mistake happening.
curl didn't use sprintf() in a way that is documented to work in POSIX but
since we use our own printf() code (from libcurl) that shouldn't be a
problem. Nonetheless I modified the code to not rely on such particular
features and to not cause further raised eyebrowse with no good reason.
plain FTP connections, and it will then allow MKD to fail once and retry the
CWD afterwards. This is especially useful if you're doing many simultanoes
connections against the same server and they all have this option enabled,
as then CWD may first fail but then another connection does MKD before this
connection and thus MKD fails but trying CWD works! The numbers can
(should?) now be set with the convenience enums now called
CURLFTP_CREATE_DIR and CURLFTP_CREATE_DIR_RETRY.
Tests has proven that if you're making an application that uploads a set of
files to an ftp server, you will get a noticable gain in speed if you're
using multiple connections and this option will be then be very useful.
version 1.1 instead of 1.0 like before. This change also introduces the new
proxy type for libcurl called 'CURLPROXY_HTTP_1_0' that then allows apps to
switch (back) to CONNECT 1.0 requests. The curl tool also got a --proxy1.0
option that works exactly like --proxy but sets CURLPROXY_HTTP_1_0.
I updated all test cases cases that use CONNECT and I tried to do some using
--proxy1.0 and some updated to do CONNECT 1.1 to get both versions run.
Curl_sspi_global_init() and Curl_sspi_global_cleanup() which previously were
named Curl_ntlm_global_init() and Curl_ntlm_global_cleanup() in http_ntlm.c
Also adjusted socks_sspi.c to remove the link-time dependency on the Windows
SSPI library using it now in the same way as it was done in http_ntlm.c.
CURLOPT_SOCKS5_GSSAPI_SERVICE and CURLOPT_SOCKS5_GSSAPI_NEC to allow libcurl
to do GSS-style authentication with SOCKS5 proxies. The curl tool got the
options called --socks5-gssapi-service and --socks5-gssapi-nec to enable
these.
