smb.c:322: warning: conversion to 'short unsigned int' from 'unsigned
int' may alter its value
smb.c:323: warning: conversion to 'short unsigned int' from 'unsigned
int' may alter its value
smb.c:482: warning: conversion to 'short unsigned int' from 'int' may
alter its value
smb.c:521: warning: conversion to 'unsigned int' from 'curl_off_t' may
alter its value
smb.c:549: warning: conversion to 'unsigned int' from 'curl_off_t' may
alter its value
smb.c:550: warning: conversion to 'short unsigned int' from 'int' may
alter its value
smb.c:489: warning: declaration of 'close' shadows a global declaration
smb.c:511: warning: declaration of 'read' shadows a global declaration
smb.c:528: warning: declaration of 'write' shadows a global declaration
smb.c:212: warning: unused parameter 'done'
smb.c:380: warning: ISO C does not allow extra ';' outside of a function
smb.c:812: warning: unused parameter 'premature'
smb.c:822: warning: unused parameter 'dead'
smb.c:311: warning: conversion from 'unsigned __int64' to 'u_short',
possible loss of data
smb.c:425: warning: conversion from '__int64' to 'unsigned short',
possible loss of data
smb.c:452: warning: conversion from '__int64' to 'unsigned short',
possible loss of data
smb.c:162: error: comma at end of enumerator list
smb.c:469: warning: conversion from 'size_t' to 'unsigned short',
possible loss of data
smb.c:517: warning: conversion from 'curl_off_t' to 'unsigned int',
possible loss of data
smb.c:545: warning: conversion from 'curl_off_t' to 'unsigned int',
possible loss of data
If the scratch buffer already existed when the CRLF conversion was
performed then the buffer pointer would be checked twice for NULL. This
second check is only necessary if the call to malloc() was performed by
the first check.
Whilst I had moved the dot stuffing code from being performed before
CRLF conversion takes place to after it, in commit 4bd860a001, I had
moved it outside the 'when something read' block of code when meant
it could perform the dot stuffing twice on partial send if nread
happened to contain the right values. It also meant the function could
potentially read past the end of buffer. This was highlighted by the
following warning:
warning: `nread' might be used uninitialized in this function
After commit 48d19acb7c the HTTP code would call Curl_nss_force_init()
twice when decoding a NTLM type-2 message, once directly and the other
through the call to Curl_sasl_decode_ntlm_type2_message().
This commit disables pipelining for HTTP/2 or upgraded connections. For
HTTP/2, we do not support multiplexing. In general, requests cannot be
pipelined in an upgraded connection, since it is now different protocol.
When the connection code decides to close a socket it informs the multi
system via the Curl_multi_closed function. The multi system may, in
turn, invoke the CURLMOPT_SOCKETFUNCTION function with
CURL_POLL_REMOVE. This happens after the socket has already been
closed. Reorder the code so that CURL_POLL_REMOVE is called before the
socket is closed.
Debug output 'typo' fix.
Don't print an extra "0x" in
* Pipe broke: handle 0x0x2546d88, url = /
Add debug output.
Print the number of connections in the connection cache when
adding one, and not only when one is removed.
Fix typos in comments.
Updated the usage of some legacy APIs, that are preventing curl from
compiling for Windows Store and Windows Phone build targets.
Suggested-by: Stefan Neis
Feature: http://sourceforge.net/p/curl/feature-requests/82/
Visual Studio 2012 introduced support for Windows Store apps as well as
supporting Windows Phone 8. Introduced build targets that allow more
modern APIs to be used as certain legacy ones are not available on these
new platforms.
Rather than define the function as extern in the source files that use
it, moved the function declaration into the SASL header file just like
the Digest and NTLM clean-up functions.
Additionally, added a function description comment block.
Previously if HTTP/2 traffic is appended to HTTP Upgrade response header
(thus they are in the same buffer), the trailing HTTP/2 traffic is not
processed and lost. The appended data is most likely SETTINGS frame.
If it is lost, nghttp2 library complains server does not obey the HTTP/2
protocol and issues GOAWAY frame and curl eventually drops connection.
This commit fixes this problem and now trailing data is processed.
Fix detection of the AsynchDNS feature which not just depends on
pthreads support, but also on whether USE_POSIX_THREADS is set or not.
Caught by test 1014.
This patch adds a new ENABLE_THREADED_RESOLVER option (corresponding to
--enable-threaded-resolver of autotools) which also needs a check for
HAVE_PTHREAD_H.
For symmetry with autotools, CURL_USE_ARES is renamed to ENABLE_ARES
(--enable-ares). Checks that test for the availability actually use
USE_ARES instead as that is the result of whether a-res is available or
not (in practice this does not matter as CARES is marked as required
package, but nevertheless it is better to write the intent).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
In preparation for moving the NTLM message code into the SASL module,
and separating the native code from the SSPI code, added functions that
simply call the functions in curl_ntlm_msg.c.
USE_NTLM would only be defined if: HTTP support was enabled, NTLM and
cryptography weren't disabled, and either a supporting cryptography
library or Windows SSPI was being compiled against.
This means it was not possible to build libcurl without HTTP support
and use NTLM for other protocols such as IMAP, POP3 and SMTP. Rather
than introduce a new SASL pre-processor definition, removed the HTTP
prerequisite just like USE_SPNEGO and USE_KRB5.
Note: Winbind support still needs to be dependent on CURL_DISABLE_HTTP
as it is only available to HTTP at present.
This bug dates back to August 2011 when I started to add support for
NTLM to SMTP.
Reworked the input token (challenge message) storage as what is passed
to the buf and desc in the response generation are typically blobs of
data rather than strings, so this is more in keeping with other areas
of the SSPI code, such as the NTLM message functions.
This temporarily breaks HTTP digest authentication in SSPI based builds,
causing CURLE_NOT_BUILT_IN to be returned. A follow up commit will
resume normal operation.
Added forward declaration of digestdata to overcome the following
compilation warning:
warning: 'struct digestdata' declared inside parameter list
Additionally made the ntlmdata forward declaration dependent on
USE_NTLM similar to how digestdata and kerberosdata are.
To provide consistent behaviour between the various HTTP authentication
functions use CURLcode based error codes for Curl_input_digest()
especially as the calling code doesn't use the specific error code just
that it failed.
These were previously hard coded, and whilst defined in security.h,
they may or may not be present in old header files given that these
defines were never used in the original code.
Not only that, but there appears to be some ambiguity between the ANSI
and UNICODE NTLM definition name in security.h.
When duplicating a handle, the data to post was duplicated using
strdup() when it could be binary and contain zeroes and it was not even
zero terminated! This caused read out of bounds crashes/segfaults.
Since the lib/strdup.c file no longer is easily shared with the curl
tool with this change, it now uses its own version instead.
Bug: http://curl.haxx.se/docs/adv_20141105.html
CVE: CVE-2014-3707
Reported-By: Symeon Paraschoudis
- Prior to this change no SSL minimum version was set by default at
runtime for PolarSSL. Therefore in most cases PolarSSL would probably
have defaulted to a minimum version of SSLv3 which is no longer secure.
The previous condition that checked if the socket was marked as readable
when also adding a writable one, was incorrect and didn't take the pause
bits properly into account.
autotools does not use features.h nor _BSD_SOURCE. As this macro
triggers warnings since glibc 2.20, remove it. It should not have
functional differences.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Typically the USE_WINDOWS_SSPI definition would not be used when the
CURL_DISABLE_CRYPTO_AUTH define is, however, it is still a valid build
configuration and, as such, the SASL Kerberos V5 (GSSAPI) authentication
data structures and functions would incorrectly be used when they
shouldn't be.
Introduced a new USE_KRB5 definition that takes into account the use of
CURL_DISABLE_CRYPTO_AUTH like USE_SPNEGO and USE_NTLM do.
Basically since servers often then don't respond well to this and
instead send the full contents and then libcurl would instead error out
with the assumption that the server doesn't support resume. As the data
is then already transfered, this is now considered fine.
Test case 1434 added to verify this. Test case 1042 slightly modified.
Reported-by: hugo
Bug: http://curl.haxx.se/bug/view.cgi?id=1443
Return a more appropriate error, rather than CURLE_OUT_OF_MEMORY when
acquiring the credentials handle fails. This is then consistent with
the code prior to commit f7e24683c4 when log-in credentials were empty.
Fixed the ability to use the current log-in credentials with DIGEST-MD5.
I had previously disabled this functionality in commit 607883f13c as I
couldn't get this to work under Windows 8, however, from testing HTTP
Digest authentication through Windows SSPI and then further testing of
this code I have found it works in Windows 7.
Some further investigation is required to see what the differences are
between Windows 7 and 8, but for now enable this functionality as the
code will return an error when AcquireCredentialsHandle() fails.
HTTP 1.1 is clearly specified to only allow three digit response codes,
and libcurl used sscanf("%3d") for that purpose. This made libcurl
support smaller numbers but not larger. It does now, but we will not
make any specific promises nor document this further since it is going
outside of what HTTP is.
Bug: http://curl.haxx.se/bug/view.cgi?id=1441
Reported-by: Balaji
Don't call CompleteAuthToken() after InitializeSecurityContext() has
returned SEC_I_CONTINUE_NEEDED as this return code only indicates the
function should be called again after receiving a response back from
the server.
This only affected the Digest and NTLM authentication code.
For consistency with other areas of the NTLM code propagate all errors
from Curl_ntlm_core_mk_nt_hash() up the call stack rather than just
CURLE_OUT_OF_MEMORY.
- Remove SSLv3 from SSL default in darwinssl, schannel, cyassl, nss,
openssl effectively making the default TLS 1.x. axTLS is not affected
since it supports only TLS, and gnutls is not affected since it already
defaults to TLS 1.x.
- Update CURLOPT_SSLVERSION doc
... for the local variable name in functions holding the return
code. Using the same name universally makes code easier to read and
follow.
Also, unify code for checking for CURLcode errors with:
if(result) or if(!result)
instead of
if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
Prefer usage of Perl modules for sha1 calculation since there
might be systems where openssl is not installed or not in path.
If openssl is used for sha1 calculation then dont rely on cut
since it is usually not available on other systems than Linux.
It turned out some features were not enabled in the build since for
example url.c #ifdefs on features that are defined on a per-backend
basis but vtls.h didn't include the backend headers.
CURLOPT_CERTINFO was one such feature that was accidentally disabled.
There is no need for such function. Include_directories propagate by
themselves and having a function with one simple link statement makes
little sense.
Coverity CID 252518. This function is in general far too complicated for
its own good and really should be broken down into several smaller
funcitons instead - but I'm adding this protection here now since it
seems there's a risk the code flow can end up here and dereference a
NULL pointer.
Coverity CID 1241957. Removed the unused argument. As this struct and
pointer now are used only for krb5, there's no need to keep unused
function arguments around.
Option --pinnedpubkey takes a path to a public key in DER format and
only connect if it matches (currently only implemented with OpenSSL).
Provides CURLOPT_PINNEDPUBLICKEY for curl_easy_setopt().
Extract a public RSA key from a website like so:
openssl s_client -connect google.com:443 2>&1 < /dev/null | \
sed -n '/-----BEGIN/,/-----END/p' | openssl x509 -noout -pubkey \
| openssl rsa -pubin -outform DER > google.com.der
Coverify CID 1157776. Removed a superfluous if() that always evaluated
true (and an else clause that never ran), and then re-indented the
function accordingly.
Coverity CID 1215284. The server name is extracted with
Curl_copy_header_value() and passed in to this function, and
copy_header_value can actually can fail and return NULL.
For private keys, use the first match from: user-specified key file
(if provided), ~/.ssh/id_rsa, ~/.ssh/id_dsa, ./id_rsa, ./id_dsa
Note that the previous code only looked for id_dsa files. id_rsa is
now generally preferred, as it supports larger key sizes.
For public keys, use the user-specified key file, if provided.
Otherwise, try to extract the public key from the private key file.
This means that passing --pubkey is typically no longer required,
and makes the key-handling behavior more like OpenSSH.
Coverity CID 1202836. If the proxy environment variable returned an empty
string, it would be leaked. While an empty string is not really a proxy, other
logic in this function already allows a blank string to be returned so allow
that here to avoid the leak.
Coverity CID 1215287. There's a potential risk for a memory leak in
here, and moving the free call to be unconditional seems like a cheap
price to remove the risk.
Coverity CID 1215296. There's a potential risk for a memory leak in
here, and moving the free call to be unconditional seems like a cheap
price to remove the risk.
Coverity detected this. CID 1241954. When Curl_poll() returns a negative value
'mcode' was uninitialized. Pretty harmless since this is debug code only and
would at worst cause an error to _not_ be returned...
Mostly because we use C strings and they end at a binary zero so we know
we can't open a file name using an embedded binary zero.
Reported-by: research@g0blin.co.uk
The switch to using Curl_expire_latest() in commit cacdc27f52 was a
mistake and was against the advice even mentioned in that commit. The
comparison in asyn-thread.c:Curl_resolver_is_resolved() makes
Curl_expire() the suitable function to use.
Bug: http://curl.haxx.se/bug/view.cgi?id=1426
Reported-By: graysky
Previously we did not handle EOF from underlying transport socket and
wrongly just returned error code CURL_AGAIN from http2_recv, which
caused busy loop since socket has been closed. This patch adds the
code to handle EOF situation and tells the upper layer that we got
EOF.
Removed ISC_REQ_* flags from calls to InitializeSecurityContext to fix
bug in NTLM handshake for HTTP proxy authentication.
NTLM handshake for HTTP proxy authentication failed with error
SEC_E_INVALID_TOKEN from InitializeSecurityContext for certain proxy
servers on generating the NTLM Type-3 message.
The flag ISC_REQ_CONFIDENTIALITY seems to cause the problem according
to the observations and suggestions made in a bug report for the
QT project (https://bugreports.qt-project.org/browse/QTBUG-17322).
Removing all the flags solved the problem.
Bug: http://curl.haxx.se/mail/lib-2014-08/0273.html
Reported-by: Ulrich Telle
Assisted-by: Steve Holme, Daniel Stenberg
As a sort of step forward, this script will now first try to get the
data from the HTTPS URL using curl, and only if that fails it will
switch back to the HTTP transfer using perl's native LWP functionality.
To reduce the risk of this script being tricked.
Using HTTPS to get a cert bundle introduces a chicken-and-egg problem so
we can't really ever completely disable HTTP, but chances are that most
users already have a ca cert bundle that trusts the mozilla.org site
that this script downloads from.
A future version of this script will probably switch to require a
dedicated "insecure" command line option to allow downloading over HTTP
(or unverified HTTPS).
By not detecting and rejecting domain names for partial literal IP
addresses properly when parsing received HTTP cookies, libcurl can be
fooled to both send cookies to wrong sites and to allow arbitrary sites
to set cookies for others.
CVE-2014-3613
Bug: http://curl.haxx.se/docs/adv_20140910A.html
Historically the default "unknown" value for progress.size_dl and
progress.size_ul has been zero, since these values are initialized
implicitly by the calloc that allocates the curl handle that these
variables are a part of. Users of curl that install progress
callbacks may expect these values to always be >= 0.
Currently it is possible for progress.size_dl and progress.size_ul
to by set to a value of -1, if Curl_pgrsSetDownloadSize() or
Curl_pgrsSetUploadSize() are passed a "size" of -1 (which a few
places currently do, and a following patch will add more). So
lets update Curl_pgrsSetDownloadSize() and Curl_pgrsSetUploadSize()
so they make sure that these variables always contain a value that
is >= 0.
Updates test579 and test599.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
As the current element in the list is free()d by Curl_llist_remove(),
when the associated connection is pending, reworked the loop to avoid
accessing the next element through e->next afterward.
SecCertificateCopyPublicKey() is not available on iPhone. Use
CopyCertSubject() instead to see if the certificate returned by
SecCertificateCreateWithData() is valid.
Reported-by: Toby Peterson
... as the struct is free()d in the end anyway. It was first pointed out
to me that one of the ->msglist assignments were supposed to have been
->pending but was a copy and paste mistake when I realized none of the
clearing of pointers had to be there.
... instead of scanning through all handles, stash only the actual
handles that are in that state in the new ->pending list and scan that
list only. It should be mostly empty or very short. And only used for
pipelining.
This avoids a rather hefty slow-down especially notable if you add many
handles to the same multi handle. Regression introduced in commit
0f147887 (version 7.30.0).
Bug: http://curl.haxx.se/mail/lib-2014-07/0206.html
Reported-by: David Meyer
Forwards the setting as minimum ssl version (if set) to polarssl. If
the server does not support the requested version the SSL Handshake will
fail.
Bug: http://curl.haxx.se/bug/view.cgi?id=1419
SecCertificateCreateWithData() returns a non-NULL SecCertificateRef even
if the buffer holds an invalid or corrupt certificate. Call
SecCertificateCopyPublicKey() to make sure cacert is a valid
certificate.
Introducing Curl_expire_latest(). To be used when we the code flow only
wants to get called at a later time that is "no later than X" so that
something can be checked (and another timeout be added).
The low-speed logic for example could easily be made to set very many
expire timeouts if it would be called faster or sooner than what it had
set its own timer and this goes for a few other timers too that aren't
explictiy checked for timer expiration in the code.
If there's no condition the code that says if(time-passed >= TIME), then
Curl_expire_latest() is preferred to Curl_expire().
If there exists such a condition, it is on the other hand important that
Curl_expire() is used and not the other.
Bug: http://curl.haxx.se/mail/lib-2014-06/0235.html
Reported-by: Florian Weimer
While waiting for a host resolve, check if the host cache may have
gotten the name already (by someone else), for when the same name is
resolved by several simultanoues requests.
The resolver thread occasionally gets stuck in getaddrinfo() when the
DNS or anything else is crappy or slow, so when a host is found in the
DNS cache, leave the thread alone and let itself cleanup the mess.
If the --cacert option is used with a CA certificate bundle that
contains multiple CA certificates, iterate through it, adding each
certificate as a trusted root CA.
This is usually due to failed auth. There's no point in us keeping such
a connection alive since it shouldn't be re-used anyway.
Bug: http://curl.haxx.se/bug/view.cgi?id=1381
Reported-by: Marcel Raad
This was done to make sure NTLM state that is bound to a connection
doesn't survive and gets used for the subsequent request - but
disconnects can also be done to for example make room in the connection
cache and thus that connection is not strictly related to the easy
handle's current operation.
The http authentication state is still kept in the easy handle since all
http auth _except_ NTLM is connection independent and thus survive over
multiple connections.
Bug: http://curl.haxx.se/mail/lib-2014-08/0148.html
Reported-by: Paras S
Problem: if CURLOPT_FORBID_REUSE is set, requests using NTLM failed
since NTLM requires multiple requests that re-use the same connection
for the authentication to work
Solution: Ignore the forbid reuse flag in case the NTLM authentication
handshake is in progress, according to the NTLM state flag.
Fixed known bug #77.
