...as it is no longer required following capability and authentication
changes and is now causing problems following commit 49341628b5 as
the test number is obtained from the client address in the EHLO.
...to the client address as this frees the RCPT strings to contain
just an email address and by passing the test number into curl as the
client address remains consistent with POP3 and IMAP tests as they are
specified in the URL.
As someone reported on the mailing list a while back, the hard-coded
arbitrary timeout of 7s in test 1112 is not sufficient in some build
environments. At Arista Networks we build and test curl as part of our
automated build system, and we've run into this timeout 170 times so
far. Our build servers are typically quite busy building and testing a
lot of code in parallel, so despite being beefy machines with 32 cores
and 128GB of RAM we still hit this 7s timeout regularly.
URL: http://curl.haxx.se/mail/lib-2010-02/0200.html
The libcurl date parser returns INT_MAX for all dates > 2037 so this
test is now made to use 2037 instead of 2038 to work the same for both
32bit and 64bit time_t systems.
Implement: Expired Cookies These following situation, curl removes
cookie(s) from struct CookieInfo if the cookie expired.
- Curl_cookie_add()
- Curl_cookie_getlist()
- cookie_output()
The message numbers given in the LIST response are an index into the
list, which are only valid for the current session, rather than being a
unique message identifier. An index would only be missing from the LIST
response if a DELE command had been issued within the same session and
had not been committed by the end of session QUIT command. Once
committed the POP3 server will regenerate the message numbers in the
next session to be contiguous again. As such our LIST response should
list message numbers contiguously until we support a DELE command in the
same session.
Should a POP3 user require the unique message ID for any or all
messages then they should use the extended UIDL command. This command
will be supported by the test ftpserver in an upcoming commit.
... this also makes sure that the progess callback gets called more
often during TFTP transfers.
Added test 1238 to verify.
Bug: http://curl.haxx.se/bug/view.cgi?id=1269
Reported-by: Jo3
The new multiply() function detects range value overflows. 32bit
machines will overflow on a 32bit boundary while 64bit hosts support
ranges up to the full 64 bit range.
Added test 1236 to verify.
Bug: http://curl.haxx.se/bug/view.cgi?id=1267
Reported-by: Will Dietz
A rather big overhaul and cleanup.
1 - curl wouldn't properly detect and reject globbing that ended with an
open brace if there were brackets or braces before it. Like "{}{" or
"[0-1]{"
2 - curl wouldn't properly reject empty lists so that "{}{}" would
result in curl getting (nil) strings in the output.
3 - By using strtoul() instead of sscanf() the code will now detected
over and underflows. It now also better parses the step argument to only
accept positive numbers and only step counters that is smaller than the
delta between the maximum and minimum numbers.
4 - By switching to unsigned longs instead of signed ints for the
counters, the max values for []-ranges are now very large (on 64bit
machines).
5 - Bumped the maximum number of globs in a single URL to 100 (from 10)
6 - Simplified the code somewhat and now it stores fixed strings as
single- entry lists. That's also one of the reasons why I did (5) as now
all strings between "globs" will take a slot in the array.
Added test 1234 and 1235 to verify. Updated test 87.
This commit fixes three separate bug reports.
Bug: http://curl.haxx.se/bug/view.cgi?id=1264
Bug: http://curl.haxx.se/bug/view.cgi?id=1265
Bug: http://curl.haxx.se/bug/view.cgi?id=1266
Reported-by: Will Dietz
CURLOPT_DNS_USE_GLOBAL_CACHE broke in commit c43127414d (been
broken since the libcurl 7.29.0 release). While this option has been
documented as deprecated for almost a decade and nobody even reported
this bug, it should remain functional.
Added test case 1512 to verify
This is a regression as this logic used to work. It isn't clear when it
broke, but I'm assuming in 7.28.0 when we went all-multi internally.
This likely never worked with the multi interface. As the failed
connection is detected once the multi state has reached DO_MORE, the
Curl_do_more() function was now expanded somewhat so that the
ftp_do_more() function can request to go "back" to the previous state
when it makes another attempt - using PASV.
Added test case 1233 to verify this fix. It has the little issue that it
assumes no service is listening/accepting connections on port 1...
Reported-by: byte_bucket in the #curl IRC channel
The internal function that's used to detect known file extensions for
the default Content-Type got the the wrong pointer passed in when
CURLFORM_BUFFER + CURLFORM_BUFFERPTR were used. This had the effect that
strlen() would be used which could lead to an out-of-bounds read (and
thus segfault). In most cases it would only lead to it not finding or
using the correct default content-type.
It also showed that test 554 and test 587 were testing for the
previous/wrong behavior and now they're updated as well.
Bug: http://curl.haxx.se/bug/view.cgi?id=1262
Reported-by: Konstantin Isakov
When doing multi-part formposts, libcurl used a pseudo-random value that
was seeded with time(). This turns out to be bad for users who formpost
data that is provided with users who then can guess how the boundary
string will look like and then they can forge a different formpost part
and trick the receiver.
My advice to such implementors is (still even after this change) to not
rely on the boundary strings being cryptographically strong. Fix your
code and logic to not depend on them that much!
I moved the Curl_rand() function into the sslgen.c source file now to be
able to take advantage of the SSL library's random function if it
provides one. If not, try to use the RANDOM_FILE for seeding and as a
last resort keep the old logic, just modified to also add microseconds
which makes it harder to properly guess the exact seed.
The formboundary() function in formdata.c is now using 64 bit entropy
for the boundary and therefore the string of dashes was reduced by 4
letters and there are 16 hex digits following it. The total length is
thus still the same.
Bug: http://curl.haxx.se/bug/view.cgi?id=1251
Reported-by: "Floris"
RFC3986 details how a path part passed in as part of a URI should be
"cleaned" from dot sequences before getting used. The described
algorithm is now implemented in lib/dotdot.c with the accompanied test
case in test 1395.
Bug: http://curl.haxx.se/bug/view.cgi?id=1200
Reported-by: Alex Vinnik
The initial fix to only compare full path names were done in commit
04f52e9b4d but found out to be incomplete. This takes should make the
change more complete and there's now two additional tests to verify
(test 31 and 62).
When sending the HTTP Authorization: header for digest, the user name
needs to be escaped if it contains a double-quote or backslash.
Test 1229 was added to verify
Reported and fixed by: Nach M. S
Bug: http://curl.haxx.se/bug/view.cgi?id=1230
I found a bug which cURL sends cookies to the path not to aim at.
For example:
- cURL sends a request to http://example.fake/hoge/
- server returns cookie which with path=/hoge;
the point is there is NOT the '/' end of path string.
- cURL sends a request to http://example.fake/hogege/ with the cookie.
The reason for this old "feature" is because that behavior is what is
described in the original netscape cookie spec:
http://curl.haxx.se/rfc/cookie_spec.html
The current cookie spec (RFC6265) clarifies the situation:
http://tools.ietf.org/html/rfc6265#section-5.2.4
If the mail sent during the transfer contains a terminating <CRLF> then
we should not send the first <CRLF> of the EOB as specified in RFC-5321.
Additionally don't send the <CRLF> if there is "no mail data" as the
DATA command already includes it.
The emails that are sent to the server during these tests were
incorrectly formatted as they contained one or more LF terminated lines
rather than being CRLF terminated as per Section 2.3.7 of RFC-2821.
This wasn't a problem for the test suite as the <stdin> data matched the
<upload> data but anyone using these tests as reference would be sending
incorrect data to a server.
Updated test903 and test904 following the addition of CURLOPT_SASL_IR
as the default behaviour of SMTP AUTH responses is now to not include
the initial response. New tests with --sasl-ir support to follow.
When connecting back to an FTP server after having sent PASV/EPSV,
libcurl sometimes didn't use the proxy properly even though the proxy
was used for the initial connect.
The function wrongly checked for the CURLOPT_PROXY variable to be set,
which made it act wrongly if the proxy information was set with an
environment variable.
Added test case 711 to verify (based on 707 which uses --socks5). Also
added test712 to verify another variation of setting the proxy: with
--proxy socks5://
Bug: http://curl.haxx.se/bug/view.cgi?id=1218
Reported-by: Zekun Ni
...instead of the 220 we otherwise expect.
Made the ftpserver.pl support sending a custom "welcome" and then
created test 1219 to verify this fix with such a 230 welcome.
Bug: http://curl.haxx.se/mail/lib-2013-02/0102.html
Reported by: Anders Havn
Accessing a file with an absolute path in the root dir but with no
directory specified was not handled correctly. This fix comes with four
new test cases that verify it.
Bug: http://curl.haxx.se/mail/lib-2013-04/0142.html
Reported by: Sam Deane
... and make 1216 also verify it with a file input
These tests verify commit 3604fde3d3c9b0d, the fix for the "cookie
domain tailmatch" vulnerability. See
http://curl.haxx.se/docs/adv_20130412.html
Previously it only compared credentials if the requested needle
connection wasn't using a proxy. This caused NTLM authentication
failures when using proxies as the authentication code wasn't send on
the connection where the challenge arrived.
Added test 1215 to verify: NTLM server authentication through a proxy
(This is a modified copy of test 67)
Since commit 57aeabcc1a, it handles errors on the control connection
while waiting for the data connection better.
Test 591 and 592 are updated accordingly.
Modified sws to support and use custom CONNECT responses instead of the
previously naive hard-coded version. Made the HTTP test server able to
extract test case number from the host name in a CONNECT request by
finding the number after the last dot. It makes 'machine.moo.123' use
test case 123.
Adapted a larger amount of tests to the new <connect> style.
Bug: http://curl.haxx.se/bug/view.cgi?id=1204
Reported by: Martin Jansen
These verfy that the 'memory tracking' subsystem is actually doing its
job when using curl tool (#96), a test in libtest (#558) and also a unit
test (#1330), in order to prevent regressions in this functionallity.
curl has been accepting URLs using slightly wrong syntax for a long
time, such as when completely missing as slash "http://example.org" or
missing a slash when a query part is given
"http://example.org?q=foobar".
curl would translate these into a legitimate HTTP request to servers,
although as was shown in bug #1206 it was not adjusted properly in the
cases where a HTTP proxy was used.
Test 1213 and 1214 were added to the test suite to verify this fix.
The test HTTP server was adjusted to allow us to specify test number in
the host name only without using any slashes in a given URL.
Bug: http://curl.haxx.se/bug/view.cgi?id=1206
Reported by: ScottJi
Introducing a number of options to the multi interface that
allows for multiple pipelines to the same host, in order to
optimize the balance between the penalty for opening new
connections and the potential pipelining latency.
Two new options for limiting the number of connections:
CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections
to the same host. When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished, so we can reuse the connection.
CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total.
When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished. The free connection will then be reused, if possible, or
closed if the pending handle can't reuse it.
Several new options for pipelining:
CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a
pipeline is "full" when a connection is to be reused, a new connection
will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it.
If not, the handle will be put in a pending state until a connection is
ready (either free or a pipe got shorter).
CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a transfer with a content
length that is larger than this.
CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a chunk larger than this.
CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow
pipelining.
CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow
pipelining.
See the curl_multi_setopt() man page for details.
The majority of lines, that specify a test file for inclusion, end with
a tab character before the slash whilst some end with a space. Corrected
those that end with a space to end with a tab character as well.
Finished segregating the email protocol tests, into their own protocol
based ranges, in preparation of adding more e-mail related tests to the
test suite.
Continued segregating the email protocol tests, into their own protocol
based ranges, in preparation of adding more e-mail related tests to the
test suite.
Continued segregating the email protocol tests, into their own protocol
based ranges, in preparation of adding more e-mail related tests to the
test suite.
Started segregating the email protocol tests, into their own protocol
based ranges, in preparation of adding more e-mail related tests to the
test suite.
Updated the FETCH command to send the UID and SECTION parsed from the
URL. By default the BODY specifier doesn't include a section, BODY[] is
now sent whereas BODY[TEXT] was previously sent. In my opinion
retrieving just the message text is rarely useful when dealing with
emails, as the headers are required for example, so that functionality
is not retained. In can however be simulated by adding SECTION=TEXT to
the URL.
Also updated test801 and test1321 due to the BODY change.
Follow up fix to commit 62bd217464 to cater for servers that don't
respond with a 250 in their EHLO responses. Additionally updated the
SMTP tests to respond with a 250 response code as per RFC5321.
This bug report properly identified that when doing SMTP and aborting
the transfer with a callback, it must be considered aborted prematurely
by the code to avoid QUIT etc to be attempted as that would cause a
hang.
The new test case 1507 verifies this behavior.
Reported by: Patricia Muscalu
Bug: http://curl.haxx.se/bug/view.cgi?id=1184
Updated the automatic response tag generation to follow the examples
given in RC3501, which list a 4 character string such as A001, A002,
etc.
As a unique identifier should be generated for each command the string
generation is based on the connection id and the incrementing command
id.
When a connection is no longer used, it is kept in the cache. If the
cache is full, the oldest idle connection is closed. If no connection is
idle, the current one is closed instead.
- document the double-quote and backslash need be escaped if quoting.
- libcurl formdata escape double-quote in filename by backslash.
- curl formparse can parse filename both contains '"' and ',' or ';'.
- curl now can uploading file with ',' or ';' in filename.
Bug: http://curl.haxx.se/bug/view.cgi?id=1171
Remove internal separated behavior of the easy vs multi intercace.
curl_easy_perform() is now using the multi interface itself.
Several minor multi interface quirks and bugs have been fixed in the
process.
Much help with debugging this has been provided by: Yang Tse
lib/objnames.inc provides definition of curl_10char_object_name() shell
function. The intended purpose of this function is to transliterate a
(*.c) source file name that may be longer than 10 characters, or not,
into a string with at most 10 characters which may be used as an OS/400
object name.
Test case 1221 does unit testng of this function and also verifies
that it is possible to generate distinct short object names for all
curl and libcurl *.c source file names.
lib/objnames-test.sh is the shell script used for test case 1221.
tests/runtests.pl modified to accept shell script test cases.
More details inside lib/objnames.inc and lib/objnames-test.sh
.. that are sent when auth-negotiating before a chunked
upload or when setting the 'Transfer-Encoding: chunked'
header and intentionally sending no content.
Adjust test565 and test1333 accordingly.
It makes no difference from curl's point of view but
makes it more convenient to use the tests with a
lws-normalizing proxy between curl and the test server.
Consistently use CRLF instead. The mixed endings weren't
documented so I assume they were unintentional.
This change doesn't matter for curl itself but makes using
the tests with a proxy between curl and the test server
more convenient.
Tests that consistently use no carriage returns were
left unmodified as one can easily work around this.
DNS cache entries populated with CURLOPT_RESOLVE were not properly freed
again when done using the multi interface.
Test case 1502 added to verify.
Bug: http://curl.haxx.se/bug/view.cgi?id=3575448
Reported by: Alex Gruz
If we use memory functions (malloc, free, strdup etc) in C sources in
libcurl and we fail to include curl_memory.h or memdebug.h we either
fail to properly support user-provided memory callbacks or the memory
leak system of the test suite fails.
After Ajit's report of a failure in the first category in http_proxy.c,
I spotted a few in the second category as well. These problems are now
tested for by test 1132 which runs a perl program that scans for and
attempts to check that we use the correct include files if a memory
related function is used in the source code.
Reported by: Ajit Dhumale
Bug: http://curl.haxx.se/mail/lib-2012-11/0125.html
The existing logic only cut off the fragment from the separate 'path'
buffer which is used when sending HTTP to hosts. The buffer that held
the full URL used for proxies were not dealt with. It is now.
Test case 5 was updated to use a fragment on a URL over a proxy.
Bug: http://curl.haxx.se/bug/view.cgi?id=3579813
As pointed out in Bug report #3579064, curl_multi_perform() would
wrongly use a blocking mechanism internally for some commands which
could lead to for example a very long block if the LIST response never
showed.
The solution was to make sure to properly continue to use the multi
interface non-blocking state machine.
The new test 1501 verifies the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3579064
Reported by: Guido Berhoerster
The test would hang and get aborted with a "ABORTING TEST, since it
seems that it would have run forever." until I prevented that from
happening.
I also fixed the data file which got broken CRLF line endings when I
sucked down the path from Joe's repo == my fault.
Removed #37 from KNOWN_BUGS as this fix and test case verifies exactly
this.
I suspect this is a regression introduced in commit 207cf150, included
since 7.24.0.
Avoid showing '(nil)' as hostname in verbose output by making sure the
hostname fixup function is called early enough to set the pointers that
are used for this. The name data is set again for each request even for
re-used connections to handle multiple hostnames over the same
connection (like with proxy) or that the casing etc of the host name is
changed between requests (which has proven to be important at least once
in the past).
Test1011 was modified to use a redirect with a re-used a connection
since it then showed the bug and now lo longer does. There's currently
no easy way to have the test suite detect 'nil' texts in verbose ouputs
so no tests will detect if this problem gets reintroduced.
Bug: http://curl.haxx.se/mail/lib-2012-07/0111.html
Reported by: Gisle Vanem
Fix a bug where closed sockets (fd -1) were left in the all_sockets
list, because of missing parens in a pointer arithmetic expression
Reenable the tests that were locking up due to this bug.
Two commits ago, we fixed a bug where the connction would be closed
prematurely after a HEAD. Now I added connection-monitor to test 48 and
added a second HEAD and make sure that both are sent over the same
connection.
This triggered a failure before the bug fix and now works. Will help us
avoid a future regression of this kind.
This makes verifying easier and makes us more sure curl closes the
connection only at the correct point in time. Adjusted test 206 and 1008
accordingly and updated the docs for it.
Since the order of the cookies is sorted by the length of the paths,
having them on the same path length will make the test depend on what
order the qsort() implementation will put them. As seen in the
windows/msys output posted by Guenter in this posting:
http://curl.haxx.se/mail/lib-2012-07/0105.html
Test 1008 and 206 don't show the disconnect since it happens when SWS
awaits a new request, but 503 does and so the verify section needs that
string added.
Using this, the server will output in the protocol log when the
connection gets disconnected and thus we will verify correctly in the
test cases that the connection doesn't get closed prematurely. This is
important for example NTLM to work.
Documentation added to FILEFORMAT, test 503 updated to use this.
With this commit, checks done in previous test2017 are now done in test2018.
Whole range test2017 to test2022 DISABLED until configure is capable of
requiring a new-enough metalink library.
Don't try these without mentioned check in place!
Print "parsing (...) OK" only when no warnings are generated. If
no file is found in Metalink, treat it FAILED.
If no digest is provided, print WARNING in parse_metalink().
Also print validating FAILED after download.
These changes make tests 2012 to 2016 pass.
