- Disable warning C4127 "conditional expression is constant" globally
in curl_setup.h for when building with Microsoft's compiler.
This mainly affects building with the Visual Studio project files found
in the projects dir.
Prior to this change the cmake and winbuild build systems already
disabled 4127 globally for when building with Microsoft's compiler.
Also, 4127 was already disabled for all build systems in the limited
circumstance of the WHILE_FALSE macro which disabled the warning
specifically for while(0). This commit removes the WHILE_FALSE macro and
all other cruft in favor of disabling globally in curl_setup.
Background:
We have various macros that cause 0 or 1 to be evaluated, which would
cause warning C4127 in Visual Studio. For example this causes it:
#define Curl_resolver_asynch() 1
Full behavior is not clearly defined and inconsistent across versions.
However it is documented that since VS 2015 Update 3 Microsoft has
addressed this somewhat but not entirely, not warning on while(true) for
example.
Prior to this change some C4127 warnings occurred when I built with
Visual Studio using the generated projects in the projects dir.
Closes https://github.com/curl/curl/pull/4658
Starting with this change when doing parallel transfers, without this
option set, curl will prefer to create new transfers multiplexed on an
existing connection rather than creating a brand new one.
--parallel-immediate can be set to tell curl to prefer to use new
connections rather than to wait and try to multiplex.
libcurl-wise, this means that curl will set CURLOPT_PIPEWAIT by default
on parallel transfers.
Suggested-by: Tom van der Woerdt
Closes#4500
New option that allows a user to ONLY switch off curl's progress meter
and leave everything else in "talkative" mode.
Reported-by: Piotr Komborski
Fixes#4422Closes#4470
Even though it cannot fall-back to a lower HTTP version automatically. The
safer way to upgrade remains via CURLOPT_ALTSVC.
CURLOPT_H3 no longer has any bits that do anything and might be removed
before we remove the experimental label.
Updated the curl tool accordingly to use "--http3".
Closes#4197
... to avoid integer overflows later when multiplying with 1000 to
convert seconds to milliseconds.
Added test 1269 to verify.
Reported-by: Jason Lee
Closes#4166
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes#3500
This is done by making sure each individual transfer is first added to a
linked list as then they can be performed serially, or at will, in
parallel.
Closes#3804
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72ca9499ff8c1cc36c2a8d520edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a13.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2f.
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes#2873Closes#3383
If another string had been set first, the writout function for reading
the syntax from file would leak the previously allocated memory.
Reported-by: Brian Carpenter
Fixes#3322Closes#3330
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
The end port number in a given range was not included in the range used,
as it is documented to be.
Reported-by: infinnovation-dev on github
Fixes#3251Closes#3255
The tool's local port command line range parser didn't check for integer
overflows and could pass "weird" data to libcurl for this option.
libcurl however, has a strict range check for the values so it rejects
anything outside of the accepted range.
Reported-by: Brian Carpenter
Closes#3242
This enables level 4 instead of the default level 3, which of the
currently used comments only allows /* FALLTHROUGH */ to silence the
warning.
Closes https://github.com/curl/curl/pull/2747
... simply because this is usually a sign of the user having omitted the
file name and the next option is instead "eaten" by the parser as a file
name.
Add test1268 to verify
Closes#2885
This allows the use of PKCS#11 URI for certificates and keys without
setting the corresponding type as "ENG" and the engine as "pkcs11"
explicitly. If a PKCS#11 URI is provided for certificate, key,
proxy_certificate or proxy_key, the corresponding type is set as "ENG"
if not provided and the engine is set to "pkcs11" if not provided.
Acked-by: Nikos Mavrogiannopoulos
Closes#2333
- Get rid of variable that was generating false positive warning
(unitialized)
- Fix issues in tests
- Reduce scope of several variables all over
etc
Closes#2631
Adds CURLOPT_TLS13_CIPHERS and CURLOPT_PROXY_TLS13_CIPHERS.
curl: added --tls13-ciphers and --proxy-tls13-ciphers
Fixes#2435
Reported-by: zzq1015 on github
Closes#2607
The feature is only enabled if the output is believed to be a tty.
-J: There's some minor differences and improvements in -J handling, as
now J should work with -i and it actually creates a file first using the
initial name and then *renames* that to the one found in
Content-Disposition (if any).
-i: only shows headers for HTTP transfers now (as documented).
Previously it would also show for pieces of the transfer that were HTTP
(for example when doing FTP over a HTTP proxy).
-i: now shows trailers as well. Previously they were not shown at all.
--libcurl: the CURLOPT_HEADER is no longer set, as the header output is
now done in the header callback.
- Add new option CURLOPT_HAPPY_EYEBALLS_TIMEOUT to set libcurl's happy
eyeball timeout value.
- Add new optval macro CURL_HET_DEFAULT to represent the default happy
eyeballs timeout value (currently 200 ms).
- Add new tool option --happy-eyeballs-timeout-ms to expose
CURLOPT_HAPPY_EYEBALLS_TIMEOUT. The -ms suffix is used because the
other -timeout options in the tool expect seconds not milliseconds.
Closes https://github.com/curl/curl/pull/2260
By properly keeping track of the last entry in the list of URLs/uploads
to handle, curl now avoids many meaningless traverses of the list which
speeds up many-URL handling *MASSIVELY* (several magnitudes on 100K
URLs).
Added test 1291, to verify that it doesn't take ages - but we don't have
any detection of "too slow" command in the test suite.
Reported-by: arainchik on github
Fixes#1959Closes#2052
The required low-level logic was already available as part of
`libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1]
option.)
This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION`
(boolean) and the new `curl` command-line option `--compressed-ssh`
to request this `libssh2` feature. To have compression enabled, it
is required that the SSH server supports a (zlib) compatible
compression method and that `libssh2` was built with `zlib` support
enabled.
[1] https://www.libssh2.org/libssh2_session_flag.html
Ref: https://github.com/curl/curl/issues/1732
Closes https://github.com/curl/curl/pull/1735
Make the number parser aware of the maximum limit curl accepts for a
value and return an error immediately if larger, instead of running an
integer overflow later.
Fixes#1730Closes#1736
