... so that failures in the global init function don't count as a
working init and it can then be called again.
Reported-by: Paul Groke
Fixes#4636Closes#4653
... and use internally. This function will return TIME_T_MAX instead of
failure if the parsed data is found to be larger than what can be
represented. TIME_T_MAX being the largest value curl can represent.
Reviewed-by: Daniel Gustafsson
Reported-by: JanB on github
Fixes#4152Closes#4651
The WHILE_FALSE construction is used to avoid compiler warnings in
macro constructions. This fixes a few instances where it was not
used in order to keep the code consistent.
Closes#4649
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Given that this is performed by the NTLM code there is no need to
perform the initialisation in the HTTP layer. This also keeps the
initialisation the same as the SASL based protocols and also fixes a
possible compilation issue if both NSS and SSPI were to be used as
multiple SSL backends.
Reviewed-by: Kamil Dudka
Closes#3935
The regexp looking for assignments within conditions was too greedy
and matched a too long string in the case of multiple conditionals
on the same line. This is basically only a problem in single line
macros, and the code which exemplified this was essentially:
do { if((x) != NULL) { x = NULL; } } while(0)
..where the final parenthesis of while(0) matched the regexp, and
the legal assignment in the block triggered the warning. Fix by
making the regexp less greedy by matching for the tell-tale signs
of the if statement ending.
Also remove the one occurrence where the warning was disabled due
to a construction like the above, where the warning didn't apply
when fixed.
Closes#4647
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
ERR_error_string(NULL) should never be called. It places the error in a
global buffer, which is not thread-safe. Use ERR_error_string_n with a
local buffer instead.
Closes#4645
This commit adds curl_multi_wakeup() which was previously in the TODO
list under the curl_multi_unblock name.
On some platforms and with some configurations this feature might not be
available or can fail, in these cases a new error code
(CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup().
Fixes#4418Closes#4608
Prior to this change schannel ignored --tls-max (CURL_SSLVERSION_MAX_
macros) when --tlsv1 (CURL_SSLVERSION_TLSv1) or default TLS
(CURL_SSLVERSION_DEFAULT), using a max of TLS 1.2 always.
Closes https://github.com/curl/curl/pull/4633
- Disable the extra sensitivity except in debug builds (--enable-debug).
- Improve SYSCALL error message logic in ossl_send and ossl_recv so that
"No error" / "Success" socket error text isn't shown on SYSCALL error.
Prior to this change 0ab38f5 (precedes 7.67.0) increased the sensitivity
of OpenSSL's SSL_ERROR_SYSCALL error so that abrupt server closures were
also considered errors. For example, a server that does not send a known
protocol termination point (eg HTTP content length or chunked encoding)
_and_ does not send a TLS termination point (close_notify alert) would
cause an error if it closed the connection.
To be clear that behavior made it into release build 7.67.0
unintentionally. Several users have reported it as an issue.
Ultimately the idea is a good one, since it can help prevent against a
truncation attack. Other SSL backends may already behave similarly (such
as Windows native OS SSL Schannel). However much more of our user base
is using OpenSSL and there is a mass of legacy users in that space, so I
think that behavior should be partially reverted and then rolled out
slowly.
This commit changes the behavior so that the increased sensitivity is
disabled in all curl builds except curl debug builds (DEBUGBUILD). If
after a period of time there are no major issues then it can be enabled
in dev and release builds with the newest OpenSSL (1.1.1+), since users
using the newest OpenSSL are the least likely to have legacy problems.
Bug: https://github.com/curl/curl/issues/4409#issuecomment-555955794
Reported-by: Bjoern Franke
Fixes https://github.com/curl/curl/issues/4624
Closes https://github.com/curl/curl/pull/4623
Prior to this change:
The check if an extra wait is necessary was based not on the
number of extra fds but on the pointer.
If a non-null pointer was given in extra_fds, but extra_nfds
was zero, then the wait was skipped even though poll was not
called.
Closes https://github.com/curl/curl/pull/4610
Improved estimation of expected_len and updated related comments;
increased strictness of QNAME-encoding, adding error detection for empty
labels and names longer than the overall limit; avoided treating DNAME
as unexpected;
updated unit test 1655 with more thorough set of proofs and tests
Closes#4598
Since 59041f0, a new timer might be set in multi_done() so the clearing
of the timers need to happen afterwards!
Reported-by: Max Kellermann
Fixes#4575Closes#4583
- Use FORMAT_MESSAGE_IGNORE_INSERTS to ignore format specifiers in
Windows error strings.
Since we are not in control of the error code we don't know what
information may be needed by the error string's format specifiers.
Prior to this change Windows API error strings which contain specifiers
(think specifiers like similar to printf specifiers) would not be shown.
The FormatMessage Windows API call which turns a Windows error code into
a string could fail and set error ERROR_INVALID_PARAMETER if that error
string contained a format specifier. FormatMessage expects a va_list for
the specifiers, unless inserts are ignored in which case no substitution
is attempted.
Ref: https://devblogs.microsoft.com/oldnewthing/20071128-00/?p=24353
- Consider a modified file to be committed this year.
- Make the travis CHECKSRC also do COPYRIGHTYEAR scan in examples and
includes
- Ignore 0 parents when getting latest commit date of file.
since in the CI we're dealing with a truncated repo of last 50 commits,
the file's most recent commit may not be available. when this happens
git log and rev-list show the initial commit (ie first commit not to be
truncated) but that's incorrect so ignore it.
Ref: https://github.com/curl/curl/pull/4547
Closes https://github.com/curl/curl/pull/4549
Co-authored-by: Jay Satiro
- Open the CA file using FILE_SHARE_READ mode so that others can read
from it as well.
Prior to this change our schannel code opened the CA file without
sharing which meant concurrent openings (eg an attempt from another
thread or process) would fail during the time it was open without
sharing, which in curl's case would cause error:
"schannel: failed to open CA file".
Bug: https://curl.haxx.se/mail/lib-2019-10/0104.html
Reported-by: Richard Alcock
... as it can make it wait there for a long time for no good purpose.
Patched-by: Jay Satiro
Reported-by: Bylon2 on github
Adviced-by: Nikos Mavrogiannopoulos
Fixes#4487Closes#4541
On macOS/BSD, trying to call sendto on a connected UDP socket fails
with a EISCONN error. Because the singleipconnect has already called
connect on the socket when we're trying to use it for QUIC transfers
we need to use plain send instead.
Fixes#4529
Closes https://github.com/curl/curl/pull/4533
The ngtcp2 QUIC backend was using the MSG_DONTWAIT flag for send/recv
in order to perform nonblocking operations. On Windows this flag does
not exist. Instead, the socket must be set to nonblocking mode via
ioctlsocket.
This change sets the nonblocking flag on UDP sockets used for QUIC on
all platforms so the use of MSG_DONTWAIT is not needed.
Fixes#4531Closes#4532
To make sure that transfer is being dealt with. Streams without
Content-Length need a final read to notice the end-of-stream state.
Reported-by: Tom van der Woerdt
Fixes#4496
The URL extracted with CURLINFO_EFFECTIVE_URL was returned as given as
input in most cases, which made it not get a scheme prefixed like before
if the URL was given without one, and it didn't remove dotdot sequences
etc.
Added test case 1907 to verify that this now works as intended and as
before 7.62.0.
Regression introduced in 7.62.0
Reported-by: Christophe Dervieux
Fixes#4491Closes#4493
With MinGW-w64, `curl_socket_t` is is a 32 or 64 bit unsigned integer,
while `read` expects a 32 bit signed integer.
Use `sread` instead of `read` to use the correct parameter type.
Closes https://github.com/curl/curl/pull/4483
