Yang Tse
532d4b5106
SunSSH sshd ignores UsePrivilegeSeparation option
2008-04-04 14:47:32 +00:00
Yang Tse
5788719988
SunSSH 1.2 options sync
2008-04-04 14:08:36 +00:00
Yang Tse
8f9e0357dd
Additional SunSSH 1.1 ssh server options
2008-02-11 14:28:48 +00:00
Yang Tse
405e192b8c
Get rid of sftp subsystem additional parameters, they aren't widely supported
2008-02-08 17:32:58 +00:00
Yang Tse
1a340de0e5
To verify that the sftp server is actually running, responsive and that
...
all curl's tests generated configuration and key files are fine, a real
connection is established to the test harness sftp server authenticating
and running a simple sftp remote pwd command.
The verification is done using OpenSSH's or SunSSH's sftp client tool with
a configuration file with the same options as the test harness socks server
with the exception that dynamic forwarding is not used for sftp.
2008-02-08 13:54:02 +00:00
Yang Tse
03bbf4de48
When possible, use additional config options for test harness ssh server,
...
which are deprecated in recent OpenSSH versions but are current for SunSSH.
2008-01-31 16:37:16 +00:00
Yang Tse
8fca5c2e69
Dont rely on PAMAuthenticationViaKbdInt default being 'no'
2008-01-27 02:35:20 +00:00
Yang Tse
e9490fdbd9
Also disable GSSAPIAuthentication for the test harness ssh client
2008-01-20 04:05:25 +00:00
Yang Tse
5004529685
Remove hardcoded verbosity
2008-01-12 04:32:03 +00:00
Yang Tse
14ff7e75e0
Temporary change to help debugging SSH server verification failures
2008-01-10 16:19:14 +00:00
Yang Tse
1c0a19ad53
Remove increased loglevel intended to debug autobuild's publickey
...
authentication failures when using OpenSSH 2.9.9 or SunSSH.
Verified fact: Even when only using publickey authentication,
OpenSSH and SunSSH first validate the user, this implies that
if the user validation fails, 'invalid user', the publickey
authentication will not be allowed to complete.
2008-01-08 19:18:25 +00:00
Yang Tse
34d02d1969
Increase loglevel to debug autobuild's publickey authentication
...
failures when using OpenSSH 2.9.9 or SunSSH
2008-01-08 00:40:02 +00:00
Yang Tse
9c6533d287
Increase MaxAuthTries from 0 to 10. Using a value of 0 is too restrictive
2008-01-06 02:02:55 +00:00
Yang Tse
61a2d5ea75
'ControlPath' ssh client configuration file option requires OpenSSH 4.2 or
...
later to accept 'none' as an indication to disable connection multiplexing
2008-01-04 14:12:10 +00:00
Yang Tse
c479c64333
SunSSH 1.1 ssh client does not support config file options:
...
ConnectTimeout
ForwardX11Trusted
HashKnownHosts
RekeyLimit
ServerAliveCountMax
ServerAliveInterval
2008-01-04 13:24:17 +00:00
Yang Tse
f5da1e5484
'LocalCommand' no longer used for ssh client config file. When used it
...
requires a non blank argument.
2008-01-04 03:04:30 +00:00
Yang Tse
fd8d862c37
Modify test harness so that the minimum SSH version required to run
...
SCP, SFTP and SOCKS4 tests is now OpenSSH 2.9.9 or SunSSH 1.0
For SOCKS5 tests minimum versions are OpenSSH 3.7 or SunSSH 1.0
2008-01-03 20:48:22 +00:00
Dan Fandrich
9cd30c2012
Use getcwd() to get the directory, which works even if one of the directory
...
components doesn't have read permission set.
2007-12-22 18:25:43 +00:00
Yang Tse
cf806748ec
To allow remote log inspection avoid redirecting messages to stderr.
...
Cleanup some debugging messages. Unlink log file on exit.
2007-11-28 01:46:28 +00:00
Yang Tse
0c367fef94
ConnectTimeout requires OpenSSH 3.7 or later
2007-11-27 20:57:22 +00:00
Yang Tse
a418d290f1
Explicitly disallow remote hosts to connect to local forwarded ports,
...
the socks server port in the test suite. This is the default setting
unless a tinkered built ssh is being used.
2007-11-27 00:52:30 +00:00
Yang Tse
d59841618d
Temporary change to better debug startup failures
...
of test suite ssh and socks servers.
2007-11-26 02:45:24 +00:00
Yang Tse
6dfb5b4e1f
Don't gather additional debug info unless sshd actually fails
2007-11-20 16:47:56 +00:00
Yang Tse
258c4686b2
Improve detection of sshd un/supported options.
...
Gather additional debug info when the test suite ssh server fails to start.
2007-11-20 14:10:09 +00:00
Yang Tse
5376d1047c
This is a temporary change to test if OpenSSH 3.6 and SunSSH 1.1
...
are good/compatible enough to run the test suite ssh server and
socks tests
2007-11-19 17:20:32 +00:00
Yang Tse
968e943eac
Temporary change to help debugging string(s) returned by sshd -V
...
when sshd is not being identified as an OpenSSH daemon
2007-11-19 01:49:28 +00:00
Yang Tse
536f98a766
Add /opt/ssh/sbin and /opt/ssh/libexec to the sshd locations search list.
...
Improve wording of a couple of debug messages.
2007-11-18 01:16:44 +00:00
Yang Tse
c4e5613a7d
When unable to start test suite sshserver, log if OpenSSH has not been
...
found or the OpenSSH version found
2007-11-17 17:43:33 +00:00
Yang Tse
2b15823dab
Add /usr/local/sbin and /usr/freeware/bin to the sshd locations search list
2007-11-17 02:28:54 +00:00
Dan Fandrich
0ed57d370d
Allow setting the IP address on which to listen for connections.
2007-09-17 21:39:34 +00:00
Dan Fandrich
c7db74fe73
Revert the 512 change since newer versions of OpenSSH don't support DSA
...
keys that small.
2007-07-19 01:42:22 +00:00
Dan Fandrich
89d119646d
Use 512 bit keys to reduce the time taken to generate them. This shouldn't
...
really reduce security since in the common case of a daily automated build
the keys are only used for a single test run lasting a few minutes before
being deleted.
2007-07-18 00:27:13 +00:00
Daniel Stenberg
b0aa11fde7
Tom Regner added /usr/lib/misc to the path to scan for sftp to make the
...
sftp tests run fine on gentoo
2007-06-14 21:16:08 +00:00
Dan Fandrich
1e718a515a
We do not use RSA keys in the test suite.
2007-06-11 17:49:25 +00:00
Dan Fandrich
6a84d492f1
Improved compatibility with perl 5.0 on the 'open' calls.
2007-06-08 17:32:24 +00:00
Dan Fandrich
073a6cea45
Renamed the sshd log file to sshd.log.
...
Added more options to the ssh config file to improve the consistency of
the test environment.
Force a rewrite of the ssh config files on every invocation.
Changed the opens to work on older versions of perl.
2007-06-07 21:42:33 +00:00
Dan Fandrich
f0ffb35d55
Fixed some problems in starting SSH for use in SOCKS.
2007-06-07 19:49:09 +00:00
Daniel Stenberg
a466b31574
Daniel Black's test suite fixes and initial test cases for SOCKS4/5 using
...
openssh
2007-06-05 13:50:59 +00:00
Yang Tse
161be66c89
when detecting un/supported sshd options use curl's sshd config file.
2007-04-03 02:36:55 +00:00
Dan Fandrich
4095c9de37
Eliminate the sshd option checking dependency on wc and make it faster.
2007-04-03 00:06:39 +00:00
Yang Tse
b8c12fe658
fix error in previous commit
2007-04-02 04:14:59 +00:00
Yang Tse
bdbaedc452
verify ssh daemon version
2007-04-02 01:21:57 +00:00
Yang Tse
fdc1b61507
sshd might fail to start if given an unsupported configuration option.
...
Try to avoid this problem checking for some possible unsupported options,
and avoid using them in the configuration file.
2007-03-31 03:21:08 +00:00
Yang Tse
f55a1c3a6c
Searching for sshd and sftp-server will be done first
...
in the PATH and afterwards in other common locations.
2007-03-30 10:11:49 +00:00
Dan Fandrich
e37a49086e
Add another option to tighten the test environment.
2007-03-29 18:46:09 +00:00
Dan Fandrich
f776c1d2eb
Abort if attempting to run as root.
2007-03-29 05:25:11 +00:00
Dan Fandrich
31b1e988f4
Only show exit status in verbose mode.
2007-03-28 04:36:09 +00:00
Dan Fandrich
884171aecf
Don't launch sshd as a daemon so its output can be logged.
2007-03-28 04:05:55 +00:00
Dan Fandrich
282127fbff
Tighten up a few more OpenSSH options
2007-03-27 04:01:39 +00:00
Dan Fandrich
b7131009fb
Changed the test harness to attempt to gracefully shut down servers
...
before resorting to the kill -9 hammer.
Added test harness infrastructure to support scp/sftp tests, using
OpenSSH as the server.
2007-03-24 01:01:28 +00:00
