... to cater for systems with unsigned time_t variables.
- Renamed the functions to curlx_timediff and Curl_timediff_us.
- Added overflow protection for both of them in either direction for
both 32 bit and 64 bit time_ts
- Reprefixed the curlx_time functions to use Curl_*
Reported-by: Peter Piekarski
Fixes#2004Closes#2005
The stub implementation is pre-loaded using LD_PRELOAD
and emulates common gssapi uses (only builds if curl is
initially built with gssapi support).
The initial tests are currently disabled for debug builds
as LD_PRELOAD is not used then.
Ref: https://github.com/curl/curl/pull/1687
The MSVC warning level defaults to 3 in CMake. Change it to 4, which is
consistent with the Visual Studio and NMake builds. Disable level 4
warning C4127 for the library and additionally C4306 for the test
servers to get a clean CURL_WERROR build as that warning is raised in
some macros in older Visual Studio versions.
Ref: https://github.com/curl/curl/pull/1667#issuecomment-314082794
Closes https://github.com/curl/curl/pull/1711
... to make all libcurl internals able to use the same data types for
the struct members. The timeval struct differs subtly on several
platforms so it makes it cumbersome to use everywhere.
Ref: #1652Closes#1693
MSVC warns that gethostbyname is deprecated. Always use getaddrinfo
instead to fix this when IPv6 is enabled, also for IPv4 resolves. This
is also consistent with what libcurl does.
Closes https://github.com/curl/curl/pull/1682
Older GCC warns:
/tests/server/rtspd.c:1194:10: warning: missing braces around
initializer [-Wmissing-braces]
Fix this by using memset instead of an initializer.
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes#1280Closes#1462
... the previous code would reset the header length wrongly (since
5113ad0424). This makes test 1060 reliable again.
Also: make sws send even smaller chunks of data to increase the
likeliness of this happening.
Include the test number in the names of files written out by tests to
reduce the chance of accidental duplication and to make it more clear
which test is associated with which file.
assign string literals to const char * instead of char * in order to
avoid a lot of these warnings:
cast from 'const char *' to 'char *' drops const qualifier
[-Wcast-qual]
This fixes the following clang warning:
getpart.c:201:17: warning: cast from function call of type 'CURLcode'
to non-matching type 'int' [-Wbad-function-cast]
In ancient MinGW versions, in6addr_any was declared as extern, but not
defined. Because of that, 22a0c57746 added
definitions for in6addr_any when compiling with MinGW. The bug was fixed in
w32api version 3.6 from 2006, so this workaround is not needed anymore for
recent versions.
This fixes the following MinGW-w64 warnings because the MinGW-w64 version of
IN6ADDR_ANY_INIT has the two additional braces inside the macro:
util.c:59:14: warning: braces around scalar initializer
util.c:59:40: warning: excess elements in scalar initializer
Ref: e4803e0da2/tree/w32api/ChangeLog
Closes https://github.com/curl/curl/pull/1379
We're mostly saying just "curl" in lower case these days so here's a big
cleanup to adapt to this reality. A few instances are left as the
project could still formally be considered called cURL.
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
The tftpd test server now logs all received options and thus all TFTP
test cases need to match them exactly.
Extended test 283 to use and verify --tftp-blksize.
The function "free" is documented in the way that no action shall occur for
a passed null pointer. It is therefore not needed that a function caller
repeats a corresponding check.
http://stackoverflow.com/questions/18775608/free-a-null-pointer-anyway-or-check-first
This issue was fixed by using the software Coccinelle 1.0.0-rc24.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
sockfilt.c:288: warning: conversion to 'DWORD' from 'size_t' may alter
its value
sockfilt.c:291: warning: conversion to 'DWORD' from 'size_t' may alter
its value
sockfilt.c:323: warning: conversion to 'DWORD' from 'size_t' may alter
its value
sockfilt.c:326: warning: conversion to 'DWORD' from 'size_t' may alter
its value
For consistency, as we seem to have a bit of a mixed bag, changed all
instances of ipv4 and ipv6 in comments and documentations to use the
correct case.
Merge multiple internal arrays into one, even if some variables
will not not be used. They are all created with the number of
file descriptors as their size.
Also fix possible thread handle leak in CloseHandle-loop.
Improves performance of test cases 574 and 575 by 50%.
A value of zero causes the thread to relinquish the remainder
of its time slice to any other thread of equal priority that is
ready to run. If there are no other threads of equal priority
ready to run, the function returns immediately, and the thread
continues execution.
http://msdn.microsoft.com/library/windows/desktop/ms686307.aspx
The ability to do HTTP requests over a UNIX domain socket has been
requested before, in Apr 2008 [0][1] and Sep 2010 [2]. While a
discussion happened, no patch seems to get through. I decided to give it
a go since I need to test a nginx HTTP server which listens on a UNIX
domain socket.
One patch [3] seems to make it possible to use the
CURLOPT_OPENSOCKETFUNCTION function to gain a UNIX domain socket.
Another person wrote a Go program which can do HTTP over a UNIX socket
for Docker[4] which uses a special URL scheme (though the name contains
cURL, it has no relation to the cURL library).
This patch considers support for UNIX domain sockets at the same level
as HTTP proxies / IPv6, it acts as an intermediate socket provider and
not as a separate protocol. Since this feature affects network
operations, a new feature flag was added ("unix-sockets") with a
corresponding CURL_VERSION_UNIX_SOCKETS macro.
A new CURLOPT_UNIX_SOCKET_PATH option is added and documented. This
option enables UNIX domain sockets support for all requests on the
handle (replacing IP sockets and skipping proxies).
A new configure option (--enable-unix-sockets) and CMake option
(ENABLE_UNIX_SOCKETS) can disable this optional feature. Note that I
deliberately did not mark this feature as advanced, this is a
feature/component that should easily be available.
[0]: http://curl.haxx.se/mail/lib-2008-04/0279.html
[1]: http://daniel.haxx.se/blog/2008/04/14/http-over-unix-domain-sockets/
[2]: http://sourceforge.net/p/curl/feature-requests/53/
[3]: http://curl.haxx.se/mail/lib-2008-04/0361.html
[4]: https://github.com/Soulou/curl-unix-socket
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
If sws is killed it might leave a stale socket file on the filesystem
which would cause an EADDRINUSE error. After this patch, it is checked
whether the socket is really stale and if so, the socket file gets
removed and another bind is executed.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
This extends sws with a --unix-socket option which causes the port to
be ignored (as the server now listens on the path specified by
--unix-socket). This feature will be available in the following patch
that enables checking for UNIX domain socket support.
Proxy support (CONNECT) is not considered nor tested. It does not make
sense anyway, first connecting through a TCP proxy, then let that TCP
proxy connect to a UNIX socket.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Instead of depending the socket domain type on use_ipv6, specify the
domain type (AF_INET / AF_INET6) as variable. An enum is used here with
switch to avoid compiler warnings in connect_to, complaining that rc
is possibly undefined (which is not possible as socket_domain is
always set).
Besides abstracting the socket type, make the debugging messages be
independent on IP (introduce location_str which points to "port XXXXX").
Rename "ipv_inuse" to "socket_type" and tighten the scope (main).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Fix detection of the AsynchDNS feature which not just depends on
pthreads support, but also on whether USE_POSIX_THREADS is set or not.
Caught by test 1014.
This patch adds a new ENABLE_THREADED_RESOLVER option (corresponding to
--enable-threaded-resolver of autotools) which also needs a check for
HAVE_PTHREAD_H.
For symmetry with autotools, CURL_USE_ARES is renamed to ENABLE_ARES
(--enable-ares). Checks that test for the availability actually use
USE_ARES instead as that is the result of whether a-res is available or
not (in practice this does not matter as CARES is marked as required
package, but nevertheless it is better to write the intent).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
There is no need for such function. Include_directories propagate by
themselves and having a function with one simple link statement makes
little sense.
gcc spit out warning: variable 'x' might be clobbered by 'longjmp' or
'vfork' messages for a few variables. These automatic variables were
expected to be changed between a setjmp/longjmp and hold their values,
so are now marked volatile.
Since the previous complex select function with initial support for
non-socket file descriptors, did not actually work correctly for
Console handles, this change simplifies the whole procedure by using
an internal waiting thread for the stdin console handle.
The previous implementation made it continuously trigger for the stdin
handle if it was being redirected to a parent process instead of
an actual Console input window.
This approach supports actual Console input handles as well as
anonymous Pipe handles which are used during input redirection.
It depends on the fact that ReadFile supports trying to read zero bytes
which makes it wait for the handle to become ready for reading.
This reverts commit 7ed25cc, reinstating commit 8ec2cb5.
As of 18-jul-2013 we still do have code in libcurl that makes use of these
memory functions. Commit 8ec2cb5 comment still applies and is yet valid.
These memory functions are solely used in Windows builds, so all related
code is protected with '#ifdef WIN32' preprocessor conditional compilation
directives.
Specifically, wcsdup() _wcsdup() are used when building a Windows target with
UNICODE and USE_WINDOWS_SSPI preprocessor symbols defined. This is the case
when building a Windows UNICODE target with Windows native SSL/TLS support
enabled.
Realizing that wcsdup() _wcsdup() are used is a bit tricky given that usage
of these is hidden behind _tcsdup() which is MS way of dealing with code
that must tolerate UNICODE and non-UNICODE compilation. Additionally, MS
header files and those compatible from other compilers use this preprocessor
conditional compilation directive in order to select at compilation time
whether 'wide' or 'ansi' MS API functions are used.
Without this code, Windows build targets with Windows native SSL/TLS support
enabled and MemoryTracking support enabled misbehave in tracking memory usage,
regardless of being a UNICODE enabled build or not.
Fixed issue with static build for MSVC2010.
After some investigation I've discovered known issue
http://public.kitware.com/Bug/view.php?id=11240 When .rc file is linked
to static lib it fails with following linker error
LINK : warning LNK4068: /MACHINE not specified; defaulting to X86
file.obj : fatal error LNK1112: module machine type 'x64' conflicts with
target machine type 'X86'
Fix add target property /MACHINE: for MSVC generation.
Also removed old workarounds - it caused errors during msvc build.
Bug: http://curl.haxx.se/mail/lib-2013-07/0046.html
If an ipv6-address is provided to CONNECT, the last hexadecimal group in
the address will be used as the test number! For example the address
"[1234::ff]" would be treated as test case 255.
This reverts commit 8ec2cb5544.
We don't have any code anywhere in libcurl (or the curl tool) that use
wcsdup so there's no such memory use to track. It seems to cause mild
problems with the Borland compiler though that we may avoid by reverting
this change again.
Bug: http://curl.haxx.se/mail/lib-2013-05/0070.html
WINSOCK only:
Since FD_CLOSE is only signaled once, it may trigger at the same
time as FD_READ. Data actually being available makes it impossible
to detect that the connection was closed by checking that recv returns
zero. Another recv attempt could block the connection if it was
not closed. This workaround abuses exceptfds in conjunction with
readfds to signal that the connection has actually closed.
