moparisthebest/curl
1
0
Fork 0
mirror of https://github.com/moparisthebest/curl synced 2024-11-15 22:15:13 -05:00
Code Issues Releases Wiki Activity
13,675 Commits 10 Branches 144 Tags 113 MiB
b370fcd300
Commit Graph

2244 Commits

Author SHA1 Message Date
Gunter Knauf
8266727062 trial with an address which has a valid domain part but invalid host to avoid dns redirections. 2008-12-30 09:16:38 +00:00
Dan Fandrich
4607dfe257 Mention what makes this test special 2008-12-11 03:01:38 +00:00
Dan Fandrich
01d6133bd7 Added test cases 1089 and 1090 to test --write-out after a redirect to 
test a report that the size didn't work, but these test cases pass.
 2008-12-09 21:59:57 +00:00
Daniel Stenberg
18371aaff9 - Fred Machado posted about a weird FTP problem on the curl-users list and when 
researching it, it turned out he got a 550 response back from a SIZE command
  and then I fell over the text in RFC3659 that says:

   The presence of the 550 error response to a SIZE command MUST NOT be taken
   by the client as an indication that the file cannot be transferred in the
   current MODE and TYPE.

  In other words: the change I did on September 30th 2008 and that has been
  included in the last two releases were a regression and a bad idea. We MUST
  NOT take a 550 response from SIZE as a hint that the file doesn't exist.
 2008-12-08 20:20:51 +00:00
Dan Fandrich
ecc6f550eb Added tests 1087 and 1088 to test Basic authentication on a redirect 
with and without --location-trusted
 2008-11-25 23:30:53 +00:00
Dan Fandrich
640974fb28 If a HTTP request is Basic and num is already >=1000, the HTTP test server 
adds 1 to num to get the data section to return. This allows testing
authentication negotiations using the Basic authentication method.
 2008-11-25 23:23:47 +00:00
Dan Fandrich
0fa14c8662 Fully clean up after test 608 so that it can be run twice in succession. 2008-11-24 22:06:43 +00:00
Daniel Stenberg
ba9f8c674c restored from my messy previous commit mistake 2008-11-21 07:47:31 +00:00
Daniel Stenberg
40e8b4e527 - I removed the default use of "Pragma: no-cache" from libcurl when a proxy is 
used. It has been used since forever but it was never a good idea to use
  unless explicitly asked for.
 2008-11-19 22:00:14 +00:00
Daniel Stenberg
4741e64c89 Josef Wolf's extension that allows a $TESTDIR/gdbinit$testnum file that when 
you use runtests.pl -g, will be sourced by gdb to allow additional fancy
or whatever you see fit
 2008-11-19 21:56:11 +00:00
Dan Fandrich
cdd6054e08 Display the time in verbose mode during the torture tests to help determine 
when the tests stall.
 2008-11-17 20:24:13 +00:00
Dan Fandrich
d1f063c62d Shortened some FTP responses to allow the timeout to be reduced by a second 
while still causing a timeout during the data phase.
 2008-11-13 01:45:59 +00:00
Dan Fandrich
b2ed1e2607 Fixed an OOM problem with test 560 2008-11-12 22:26:06 +00:00
Dan Fandrich
fb8870297d Give the test an extra second to run so it passes on slow machines 2008-11-12 01:04:27 +00:00
Daniel Stenberg
d07d1a6ef8 Added test case 560: 
This test was added after the HTTPS-using-multi-interface with OpenSSL
regression of 7.19.1 to hopefully prevent this embarassing mistake from
appearing again... Unfortunately the bug wasn't triggered by this test, which
presumably is because the connect to a local server is too fast/different
compared to the real/distant servers we saw the bug happen with.
 2008-11-11 21:59:25 +00:00
Daniel Stenberg
8bdd60fa71 Added missing <keywords> 2008-11-11 21:58:41 +00:00
Yang Tse
95a849efc2 terminate with appropriate exit code 2008-11-07 12:22:43 +00:00
Dan Fandrich
2903a5c050 Added test 1086 to test a timeout the occurs during an FTP data transfer. 2008-11-06 00:13:18 +00:00
Dan Fandrich
4d50b9f1f1 Make the SLOWDOWN option slow the FTP data connection, not just the 
control connection.
 2008-11-06 00:10:58 +00:00
Yang Tse
02fc7bb5f6 fix OOM handling 2008-10-31 14:46:48 +00:00
Yang Tse
0ce97f77e0 Use our Curl_addrinfo definition even when an addrinfo struct is available. 
Use a wrapper function to call system's getaddrinfo().
 2008-10-30 13:45:25 +00:00
Dan Fandrich
dc31387c6f SLOWDOWN actually causes a 0.01 second delay between bytes 2008-10-30 01:44:18 +00:00
Dan Fandrich
a10044e110 Changed the "resolve" test precheck program to verify that an IPv6 socket 
can be created before resolving the IPv6 name.  In the context of running
a test, it doesn't make sense to run an IPv6 test when a host is resolvable
but IPv6 isn't usable.  This should fix failures of test 1085 on hosts with
library and DNS support for IPv6 but where actual use of IPv6 has been
administratively disabled.
 2008-10-28 20:03:22 +00:00
Yang Tse
b17ca44f0b fix test # 558 and 559 CFLAGS 2008-10-28 00:35:08 +00:00
Yang Tse
9230708e47 don't skip tests 558 and 559 on i686 icc autobuilds 2008-10-27 20:09:35 +00:00
Yang Tse
92f3b3895e test #558 tests internal hash create/destroy 
test #559 tests internal hash create/add/destroy
 2008-10-27 20:01:58 +00:00
Yang Tse
310d842b70 Skip test #558 when libcurl is built with hidden symbols 2008-10-27 14:02:50 +00:00
Yang Tse
1498de83d6 For tracing purposes log a fake call to getaddrinfo 
when allocating/building the fake Curl_addrinfo.
 2008-10-27 08:20:36 +00:00
Yang Tse
39e5fa6ae8 avoid using Curl_ip2addr(), simply build up a fake Curl_addrinfo 2008-10-27 03:00:47 +00:00
Yang Tse
dc289aa4fa convert test #558 into something more interesting, attempting 
now to minimally exercise some internal hash routines.
 2008-10-26 21:40:20 +00:00
Yang Tse
6db8f53445 test #558 verifies loop operation using malloc() and free() 2008-10-26 03:03:29 +00:00
Yang Tse
068ba17e21 moved some definitions from tftp.h to tftpd.c 2008-10-23 14:34:08 +00:00
Yang Tse
4d10c96aa6 fix compiler warning 2008-10-23 14:07:28 +00:00
Dan Fandrich
9391d980c3 Tweaked a few tests to test proper Turkish locale handling 2008-10-23 01:53:27 +00:00
Yang Tse
81e48ada47 For i686 icc autobuilds: 
Re-enable all tests for debug-enabled builds.

  For debug-disabled builds only 8 tests are enabled.
 2008-10-22 15:03:15 +00:00
Dan Fandrich
7ff38c14a9 Fixed some problems with SFTP range support to fix test cases 634 through 637. 2008-10-21 07:10:25 +00:00
Dan Fandrich
7ded272b94 Added missing HTTP proxy and other keywords 2008-10-16 21:34:34 +00:00
Dan Fandrich
357383159e A <precheck> command is considered to have failed if it returns a non-zero 
return code.  This way, if the precheck command can't be run at all for
whatever reason, it's treated as a precheck failure which causes the
test to be skipped.
 2008-10-15 17:41:02 +00:00
Yang Tse
e16bccbb91 attempt to fix compiler warning: 
`variable' might be clobbered by `longjmp' or `vfork'
 2008-10-14 17:35:25 +00:00
Dan Fandrich
a102c2c22b Don't rely on shell support to run multiple precheck tests 2008-10-13 20:41:02 +00:00
Dan Fandrich
d74d3fe851 Ensure the IPv6 stack is operational before running this test (other tests 
use the startup of the IPv6 test server as a substitute check for this).
 2008-10-12 05:27:26 +00:00
Dan Fandrich
5ecff1e4c3 Added HTTP as a required feature 2008-10-09 18:53:17 +00:00
Dan Fandrich
f6d80d66a2 Added tests 633 through 637 to test the new file range support for SFTP. 
All but the first test cause an infinite loop or other failure and so
are added to DISABLED.
 2008-10-09 05:16:06 +00:00
Daniel Stenberg
830018aa38 - Bug #2152270 (http://curl.haxx.se/bug/view.cgi?id=2152270) identified and 
fixed a CURLINFO_REDIRECT_URL memory leak and an additional wrong-doing:

  Any subsequent transfer with a redirect leaks memory, eventually crashing
  the process potentially.

  Any subsequent transfer WITHOUT a redirect causes the most recent redirect
  that DID occur on some previous transfer to still be reported.
 2008-10-08 22:01:23 +00:00
Dan Fandrich
8dfddd279b Added tests 1082 through 1085 to test symbolic --interface parameters 2008-10-08 21:46:55 +00:00
Dan Fandrich
11a8a25528 Created test cases 1080 and 1081 to reproduce a problem of 
CURLINFO_REDIRECT_URL leaking memory and returning incorrect results when
two URLs are requested. Reported by vmpdemo in bug #2152270
 2008-10-08 03:32:10 +00:00
Dan Fandrich
95456b8e78 Added const to some pointer variables 2008-10-08 01:17:51 +00:00
Dan Fandrich
b9ce871463 Changed the handling of read/write errors in Curl_perform() to allow a 
a fresh connection to be made in such cases and the request retransmitted.
This should fix test case 160.  Added test case 1079 in an attempt to
test a similar connection dropping scenario, but as a race condition, it's
hard to test reliably.
 2008-10-07 23:15:02 +00:00
Dan Fandrich
feeabd08ab Document how to disable tests when certain --disable-* flags are used. 2008-10-07 20:28:25 +00:00
Yang Tse
445e4a9792 revert change introduced in tftpd.c revision 1.44 2008-10-03 03:42:44 +00:00
Yang Tse
9cea2dfb8f fix compiler warning: dereferencing type-punned pointer will break strict-aliasing rules 2008-10-02 14:44:18 +00:00
Yang Tse
26a651f7ae fix compiler warning: variable' might be clobbered by longjmp' or `vfork' 2008-10-02 13:28:10 +00:00
Yang Tse
ac0e0351a0 runtests.pl enables picky compiler warnings unless explicitly disabled 2008-10-02 03:59:25 +00:00
Dan Fandrich
88513d2d1a Fixed some compiler warnings with gcc 2008-10-01 17:34:24 +00:00
Dan Fandrich
d3fdbe48ae Added "HTTP proxy" keyword 2008-09-30 17:18:27 +00:00
Daniel Stenberg
038542ea3e - The libcurl FTP code now returns CURLE_REMOTE_FILE_NOT_FOUND error when SIZE 
gets a 550 response back for the cases where a download (or NOBODY) is
  wanted. It still allows a 550 as response if the SIZE is used as part of an
  upload process (like if resuming an upload is requested and the file isn't
  there before the upload). I also modified the FTP test server and a few test
  cases accordingly to match this modified behavior.
 2008-09-30 09:51:58 +00:00
Dan Fandrich
372203f1fa Added "HTTP proxy" and "proxytunnel" keywords where applicable 2008-09-29 22:44:04 +00:00
Yang Tse
a632f6d5b1 if a test execution is aborted due to a signal, and the process 
returns no other exitcode, use 2000 + signal number as return code
 2008-09-26 18:56:56 +00:00
Yang Tse
42271ad463 use shift right. Division result is not integral. 2008-09-26 14:08:33 +00:00
Yang Tse
57ee847ce7 Avoid the use of the '? :' operator inside the call to our 
test-server logging function. It doesn't work on some systems.
 2008-09-26 11:21:22 +00:00
Yang Tse
985bd18904 attempt to avoid HTTP server startup misdetection on some systems 2008-09-26 01:08:24 +00:00
Yang Tse
2d1f798d14 fix potential buffer overflow in test-server logging function 2008-09-26 00:17:01 +00:00
Yang Tse
82107a02f5 Re-enable test #100 on i686 icc autobuilds 2008-09-24 01:29:23 +00:00
Daniel Stenberg
42224594b6 remove the entire comment now when we no longer set TZ 2008-09-23 11:02:56 +00:00
Daniel Stenberg
d369a2b775 - Introducing Jamie Lokier's function for date to epoch conversion used in the 
date parser function. This makes our function less dependent on system-
  provided functions and instead we do all the magic ourselves. We also no
  longer depend on the TZ environment variable.
 2008-09-23 11:00:01 +00:00
Daniel Stenberg
391e8afd1f - Made the SOCKS code use the new Curl_read_plain() function to fix the bug 
Markus Moeller reported: http://curl.haxx.se/mail/archive-2008-09/0016.html

- recv() errors other than those equal to EAGAIN now cause proper
  CURLE_RECV_ERROR to get returned. This made test case 160 fail so I've now
  disabled it until we can figure out another way to exercise that logic.
 2008-09-22 23:12:00 +00:00
Daniel Stenberg
de48e4e4df better description 2008-09-22 21:33:18 +00:00
Yang Tse
1e076a4ae0 Re-enable tests #1 on i686 icc autobuilds 2008-09-22 18:55:42 +00:00
Dan Fandrich
abe61b9926 Fixed test 539 to handle an out of memory condition that shows up now 
that memdebug.h is included in the test programs.
 2008-09-22 17:20:29 +00:00
Yang Tse
2b767161da fix compiler warning: defined but not used 2008-09-21 04:02:13 +00:00
Yang Tse
7c9631081d fix compiler warning: external declaration in primary source file 2008-09-21 03:48:25 +00:00
Yang Tse
b6f29bef06 fix compiler warning: defined but not used 2008-09-21 02:35:20 +00:00
Yang Tse
fe5f448015 fix compiler warning: external definition with no prior declaration 2008-09-20 12:33:02 +00:00
Yang Tse
7beb473a3d include "memdebug.h" 2008-09-20 04:26:55 +00:00
Yang Tse
f7ef60c13f fix compiler warning: external definition with no prior declaration 2008-09-18 19:17:28 +00:00
Yang Tse
8b2bfa4212 fix compiler warning: external definition with no prior declaration 2008-09-18 19:02:40 +00:00
Yang Tse
a6c915aab9 fix compiler warning: external declaration in primary source file 2008-09-18 16:21:09 +00:00
Dan Fandrich
974145f61c Changed the test data file so it passes an XML syntax check 2008-09-15 22:35:09 +00:00
Yang Tse
eae27d1788 Disable all tests on i686 icc autobuilds to inspect build messages 2008-09-08 16:50:04 +00:00
Dan Fandrich
c3d871aef4 Added HTTP 1.0 downgrade tests with proxies 2008-09-06 18:24:04 +00:00
Yang Tse
59e378f48f remove unnecessary typecasting of malloc() 2008-09-06 05:29:05 +00:00
Dan Fandrich
91ff938035 Improved the logic the decides whether to use HTTP 1.1 features or not in a 
request.

Detect cases where an upload must be sent chunked and the server supports
only HTTP 1.0 and return CURLE_UPLOAD_FAILED.
 2008-09-05 17:58:53 +00:00
Daniel Stenberg
18110b519c - Martin Drasar provided the CURLOPT_POSTREDIR patch. It renames 
CURLOPT_POST301 (but adds a define for backwards compatibility for you who
  don't define CURL_NO_OLDIES). This option allows you to now also change the
  libcurl behavior for a HTTP response 302 after a POST to not use GET in the
  subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the
  patch somewhat before commit. The curl tool got a matching --post302
  option. Test case 1076 was added to verify this.
 2008-09-05 16:13:20 +00:00
Daniel Stenberg
780f13db30 Stefan Krause's mail to curl-library at 03 Sep 2008 made me add these two 
new date strings to get tested too.
 2008-09-05 08:15:21 +00:00
Yang Tse
8733e087d7 fix print formatting string directives 2008-09-04 05:29:10 +00:00
Dan Fandrich
85a79f9d67 Added tests 1071 through 1074 to test automatic downgrading from HTTP 1.1 
to HTTP 1.0 upon receiving a response from the HTTP server.  Tests 1072
and 1073 are similar to test 1069 in that they involve the impossible
scenario of sending chunked data to a HTTP 1.0 server.  All these currently
fail and are added to DISABLED.

Added test 1075 to test --anyauth with Basic authentication.
 2008-08-29 23:42:39 +00:00
Daniel Stenberg
d24465b79a test 1070 added 2008-08-29 10:48:27 +00:00
Daniel Stenberg
c67a99ff27 - When libcurl was doing a HTTP POST and the server would respond with 
"Connection: close" and actually close the connection after the
  response-body, libcurl could still have outstanding data to send and it
  would not properly notice this and stop sending. This caused weirdness and
  sad faces. http://curl.haxx.se/bug/view.cgi?id=2080222

  Note that there are still reasons to consider libcurl's behavior when
  getting a >= 400 response code while sending data, as Craig Perras' note
  "http upload: how to stop on error" specifies:
  http://curl.haxx.se/mail/archive-2008-08/0138.html
 2008-08-29 10:47:59 +00:00
Daniel Stenberg
e138ae5ec9 - I'm abandoning the system with the web site mirrors (but keeping download 
files bing mirrored) and thus I've changed the URL in the cookiejar header
  to no longer use curlm.haxx.se but instead use the main site curl.haxx.se
 2008-08-28 11:35:54 +00:00
Dan Fandrich
8ce78ca488 Fixed test case 1065 by changing the handling of CURLOPT_UPLOAD to set 
the HTTP method to GET (or HEAD) when given a value of 0.
 2008-08-28 06:28:07 +00:00
Dan Fandrich
370c3afc71 Added test 1069 to test PUT from stdin without content length. It fails 
in a similar manner to test 1065 so is added to DISABLED.
 2008-08-28 02:24:46 +00:00
Dan Fandrich
93357ef017 Added test 1069 to test PUT from stdin without content length. It fails 
in a similar manner to test 1065 so is added to DISABLED.
 2008-08-28 02:18:44 +00:00
Dan Fandrich
753592cc70 Added test case 1068 to do a simple HTTP PUT from stdin 2008-08-28 02:03:54 +00:00
Dan Fandrich
fc09d10560 Added multi keyword 2008-08-26 20:21:59 +00:00
Dan Fandrich
59b2e3ea4a Added multi keyword 2008-08-26 20:11:12 +00:00
Yang Tse
d744c85310 Re-enable all tests on x86_64 and ia64. 2008-08-24 23:26:07 +00:00
Yang Tse
62d94ff342 Fix wrong signed int formatting string directive in test case #557. 
This error did not cause test failures on systems where sizeof(int) == sizeof(long).
 2008-08-24 17:10:24 +00:00
Yang Tse
71d3c5bf41 Disable all tests except #557 on x86_64 and ia64 to debug trace curl_mprintf() on these systems. 2008-08-24 15:57:52 +00:00
Daniel Stenberg
b34390017b added test case 1067 to verify --referer "firstone.html;auto" 2008-08-23 21:27:58 +00:00
Daniel Stenberg
a604682805 Andy Tsouladze's fix to kill the knowledge of servers properly after they have 
been killed.
 2008-08-23 11:25:14 +00:00
Dan Fandrich
e3ad6d2bd1 Fixed a problem when --dump-header - was given with more than one URL, 
which caused an error when the second header was dumped due to stdout
being closed.  Added test case 1066 to verify.  Also fixed a potential
problem where a closed file descriptor might be used for an upload
when more than one URL is given.
 2008-08-22 22:57:25 +00:00
Yang Tse
e5b713ee63 Increase to 20 the number of CVS update retries. 2008-08-22 18:18:20 +00:00
Yang Tse
95cef39def Test case 557 now also verifies signed and unsigned int formatting. 2008-08-21 05:19:40 +00:00
Yang Tse
1c68e79091 Simplify condition check 2008-08-20 23:29:07 +00:00
Yang Tse
3e0b6a7d1f Update test case 557 2008-08-18 18:52:13 +00:00
Yang Tse
2f71461b29 Added test case 557 to verify libcurl's internal curl_m*printf() functions 
formatting functionality when handling signed and unsigned longs, as well as
our curl_off_t data type.
 2008-08-18 09:58:08 +00:00
Yang Tse
ac18b471d2 libcurl internal base64.h header file renamed to curl_base64.h 2008-08-17 00:25:38 +00:00
Dan Fandrich
a923d8541c Added test case 1065 to test a PUT with a single file but two URLs. This 
was discovered to be problematic while investigating an incident reported by
Von back in May.  curl in this case doesn't include a Content-Length: or
Transfer-Encoding: chunked header which is illegal. This test case is
added to DISABLED until a solution is found.
 2008-08-15 19:18:46 +00:00
Dan Fandrich
527a5f0980 Added Range keyword 2008-08-14 19:18:18 +00:00
Dan Fandrich
6e878d2ca4 Added test 1063 to test an invalid large range on a file: 2008-08-14 19:18:01 +00:00
Dan Fandrich
7eab7fa353 Fixed a buffer overflow problem in Curl_proxyCONNECT that could occur 
when a server responded with long headers and data.  Luckily, the buffer
overflowed into another unused buffer, so no actual harm was done.
Added test cases 1060 and 1061 to verify.
 2008-08-12 20:07:52 +00:00
Dan Fandrich
9ee7a014c9 Handle short reads 2008-08-12 18:32:55 +00:00
Daniel Stenberg
14a5596346 - Andy Tsouladze fixed runtests.pl to not attempt to execute the stunnel 
_directory_ if that happened to appear in the path!
 2008-08-12 07:21:39 +00:00
Dan Fandrich
e8e8177e9d Added HTTP CONNECT keywords 2008-08-11 23:16:48 +00:00
Dan Fandrich
f1fe04245a Fixed a boundary condition error in ftp_readresp() whereby a non-terminal 
line of a multiline FTP response whose last byte landed exactly at the end
of the BUFSIZE-length buffer would be treated as the terminal response
line.  The following response code read in would then actually be the
end of the previous response line, and all responses from then on would
correspond to the wrong command. Test case 1062 verifies this.

Stop closing a never-opened ftp socket.
 2008-08-11 23:16:08 +00:00
Yang Tse
3a1d28379a Die when curlbuild.h is not created or available 2008-08-11 00:15:20 +00:00
Yang Tse
68cfe929c4 Fix NetWare curlbuild.h 
NetWare curlbuild.h settings depend on whether LIBC or CLIB is used.

The NetWare specific Makefile is capable of knowing which target is being built.
So, finally, the NetWare Makefile will take care of generating curlbuild.h
 2008-08-10 18:33:41 +00:00
Yang Tse
b023f9bd2a When running testcurl.pl display definitions from curlbuild.h 2008-08-09 23:14:40 +00:00
Yang Tse
f01d18e4b9 Reintroduce the adjustment previously done in testcurl.pl so that it copies the 
CVS checked out curlbuild.h.dist as curlbuild.h for any non-configure target
when host system is not running buildconf.bat.

All the curlbuild.h stuff was done taking in consideration that no adjustment
would be needed in non-configure makefiles.

As it is documented, when trying to build on non-configure capable systems or on
systems which for any reason don't run the true configure script, it is required
to have the proper curlbuild.h in place before calling any makefile.

Due to the hardcore memory debugging stuff c-ares enabled debug builds also need
the file in the proper place before attempting to build c-ares.
 2008-08-08 12:34:01 +00:00
Dan Fandrich
fa001f27a5 Made ftp a required feature 2008-08-08 07:51:50 +00:00
Dan Fandrich
40b2e06a7f Added test1059 to test the FTP proxy tunnel problem fixed July 11. 2008-08-08 07:26:30 +00:00
Yang Tse
8008499028 Peek at predefined symbols done. and now removed. 
Netware's autobuilds gcc can not been told apart from a standard built gcc.
 2008-08-08 05:58:08 +00:00
Yang Tse
8d36acd29b Take a peek at netware's gcc predefined symbols. 2008-08-08 03:09:16 +00:00
Yang Tse
f6a958dc3a Remove last adjustment done to testcurl.pl to verify if change introduced by 
Guenter Knauf in lib/Makefile.netware is enough to get the netware autobuilds
going again.
 2008-08-07 22:40:06 +00:00
Yang Tse
a7d52c414f Adjust testcurl.pl to copy checked out curlbuild.h.dist as curlbuild.h 
for non-configure targets when host system doesn't run buildconf.bat.
 2008-08-07 20:41:12 +00:00
Yang Tse
14240e9e10 Initial support of curlbuild.h and curlrules.h which allows 
to have a curl_off_t data type no longer gated to off_t.
 2008-08-07 00:29:08 +00:00
Daniel Stenberg
3a499099af - Test cases 1051, 1052 and 1055 were added by Daniel Fandrich on July 30 and 
proved how PUT and POST with a redirect could lead to a "hang" due to the
  data stream not being rewound properly when it had to in order to get sent
  properly (again) to the subsequent URL. This is now fixed and these test
  cases are no longer disabled.
 2008-08-04 22:00:22 +00:00
Daniel Stenberg
8d012181b0 - Test case 1041 (added by Daniel Fandrich April 14th) proved a bug where PUT 
with -C - sent garbage in the Content-Range: header. I fixed this problem by
  making sure libcurl always sets the size of the _entire_ upload if an app
  attemps to do resumed uploads since libcurl simply cannot know the size of
  what is currently at the server end. Test 1041 is no longer disabled.
 2008-08-03 22:20:58 +00:00
Dan Fandrich
6838fb32af Improved title 2008-08-03 05:13:05 +00:00
Dan Fandrich
f27299dc3b Added tests 1057 and 1058 to test FTP and HTTPS transfers with ranges 
relative to end of file.
 2008-08-01 22:12:34 +00:00
Dan Fandrich
9251dd7b24 User names embedded in proxy URLs without a password were parsed 
incorrectly--the host name is treated as part of the user name and the
port number becomes the password.  This can be observed in test 279
(was KNOWN_ISSUE #54).
 2008-08-01 02:09:08 +00:00
Dan Fandrich
b13b9f3331 Fixed keyword 2008-07-31 05:00:02 +00:00
Dan Fandrich
108e584983 Added keywords 2008-07-31 02:51:44 +00:00
Dan Fandrich
f3b4071209 Added test of IPv6 scope handling 2008-07-31 02:38:51 +00:00
Yang Tse
0de08d418f s/silly/underquoted definition/ 2008-07-31 01:41:20 +00:00
Dan Fandrich
bc649593e4 Added test cases 1052 through 1055 to test uploading data from files 
during redirects.  Test cases 1052 and 1055 show problems (maybe the same
root cause as 1051) and are disabled.
 2008-07-30 21:04:44 +00:00
Dan Fandrich
1f26ea4a85 Added test case 1051 to test Location: following with PUT, as reported 
by Ben Sutcliffe.  The test when run manually shows a problem in curl,
but the test harness web server doesn't run the test correctly so it's
disabled for now.
 2008-07-30 07:24:59 +00:00
Yang Tse
912c29fd8c Undo using the sreadfrom() wrapper to replace recvfrom() in our code, for real ;-) 2008-07-30 06:20:43 +00:00
Yang Tse
537490e391 Undo using the sreadfrom() wrapper to replace recvfrom() in our code. 2008-07-30 05:10:42 +00:00
Yang Tse
7a588144b7 Reinstate hiding aclocal 'underquoted definition' warnings. 2008-07-30 04:42:16 +00:00
Dan Fandrich
adc032e7d8 Return an error code when extra files are found in filecheck: 2008-07-29 18:57:01 +00:00
Dan Fandrich
4ff37a4ed1 Added test case 1050 to test --ftp-port with an IPv6 address. 
Made --interface tests less restrictive on host address.
 2008-07-29 01:05:28 +00:00
Dan Fandrich
f042a7419d Added test cases 1045 through 1049 as simple tests of --interface using the 
localhost interface.
 2008-07-28 18:39:32 +00:00
Dan Fandrich
b6b03c8ab9 Added feature in runtests.pl to select tests based on key word. 2008-07-27 02:34:27 +00:00
Dan Fandrich
e06944438a Added test 1044 to test large file support in ftp with -I. 2008-07-26 20:09:36 +00:00
Yang Tse
b217e6eed7 No longer hide aclocal 'underquoted definition' warnings. 
http://sources.redhat.com/automake/automake.html#Extending-aclocal documents
that starting with Automake 1.8, aclocal will warn about all underquoted calls
to AC_DEFUN due to the fact that in a single aclocal run it might include more
than once all .m4 files which it finds available, this includes .m4 files from
other software packages.

If the first argument to AC_DEFUN is underquoted and the same macro is included
more than once, successive inclusions after the first one will expand the macro
instead of assuming it is the same as the first one included.
 2008-07-26 00:19:03 +00:00
Dan Fandrich
932b589780 Changed the long logfile elision code in runtests.pl to properly handle 
lines ending in \r.
 2008-07-24 02:16:48 +00:00
Dan Fandrich
27c282a6ee Mention that the test harness can't check every possible feature. 2008-07-23 23:03:52 +00:00
Yang Tse
51e84c77e7 fix compiler warning: implicit conversion from "long" to "int" 2008-07-21 09:23:56 +00:00
Yang Tse
1b37baf656 Use the sreadfrom() wrapper to replace recvfrom() in our code. 2008-07-21 03:06:07 +00:00
Dan Fandrich
ed2dbefa73 Fixed the XML syntax of a few test files. 2008-07-17 22:39:23 +00:00
Yang Tse
1e7125ae7b add comment for include paths 2008-07-15 05:46:49 +00:00
Dan Fandrich
aa4a7471dd Added test1042 and test1043 to test -C - on HTTP. 2008-07-15 04:12:15 +00:00
Dan Fandrich
69a03ce23c Added test1040 and test1041 to test -C - on HTTP. Test 1041 failed so it's 
added to DISABLED.
 2008-07-15 03:36:38 +00:00
Dan Fandrich
336992cc54 Fixed test 553 to pass the torture test. 2008-07-11 18:23:06 +00:00
Dan Fandrich
13afcbd1eb Avoid a potential zombie process when killing an old ftpserver 2008-07-11 17:18:37 +00:00
Dan Fandrich
8d49a8f278 Added test cases 1038 and 1039 to test Adrian Kreher's report that ftp 
uploads with -C - didn't resume properly, but the tests pass.
 2008-07-11 05:08:06 +00:00
Yang Tse
d8f109176c fallback to gettimeofday when monotonic clock is unavailable at run-time 2008-07-10 07:16:45 +00:00
Dan Fandrich
bbb1b99ce1 Added tests 1036 and 1037 to verify resumed ftp downloads with -C - 2008-07-10 06:09:03 +00:00
Dan Fandrich
60f0b4fffe Fixed test 554 to pass the torture test. 2008-07-08 21:16:18 +00:00
Dan Fandrich
a25959184e Added test cases 1034 & 1035 to test IDN name conversion failures. 2008-07-07 23:52:52 +00:00
Daniel Stenberg
0e5da5b8bc - Scott Barrett provided a test case for a segfault in the FTP code and the 
fix for it. It occured when you did a FTP transfer using
  CURLFTPMETHOD_SINGLECWD and then did another one on the same easy handle but
  switched to CURLFTPMETHOD_NOCWD. Due to the "dir depth" variable not being
  cleared properly.  Scott's test case is now known as test 539 and it
  verifies the fix.
 2008-07-07 20:37:07 +00:00
Daniel Stenberg
82412f218f Phil Blundell provided a fix for libcurl's treatment of unexpected 1xx 
response codes. Previously libcurl would hang on such occurances. I added
test case 1033 to verify.
 2008-07-03 08:47:53 +00:00
Daniel Stenberg
d92945bb8a - Eduard Bloch filed the debian bug report #487567 
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487567) pointing out that
  libcurl used Content-Range: instead of Range when doing a range request with
  --head (CURLOPT_NOBODY). This is now fixed and test case 1032 was added to
  verify.
 2008-06-22 20:38:16 +00:00
Dan Fandrich
a837bd08b0 Edited some test keywords for consistency 2008-06-21 17:56:48 +00:00
Dan Fandrich
70d834c512 Always use $LOGDIR when referring to the log directory. 2008-06-19 01:12:02 +00:00
Dan Fandrich
5304b13365 Added SSH failure test cases 628-632 2008-06-19 00:18:58 +00:00
Daniel Stenberg
2d0fea2650 fixed the language somewhat 2008-06-13 20:45:34 +00:00
Dan Fandrich
024c7641a9 Added IPv6 keywords for some more tests that require IPv6 networking support 2008-06-12 23:50:57 +00:00
Daniel Stenberg
5abfdc0140 - curl the tool now deals with its command line options somewhat differently! 
All boolean options (such as -O, -I, -v etc), both short and long versions,
  now always switch on/enable the option named. Using the same option multiple
  times thus make no difference. To switch off one of those options, you need
  to use the long version of the option and type --no-OPTION. Like to disable
  verbose mode you use --no-verbose!

- Added --remote-name-all to curl, which if used changes the default for all
  given URLs to be dealt with as if -O is used. So if you want to disable that
  for a specific URL after --remote-name-all has been used, you muse use -o -
  or --no-remote-name.
 2008-06-08 20:53:49 +00:00
Daniel Stenberg
930a45e7a9 - Added CURLINFO_PRIMARY_IP as a new information retrievable with 
curl_easy_getinfo. It returns a pointer to a string with the most recently
  used IP address. Modified test case 500 to also verify this feature. The
  implementing of this feature was sponsored by Lenny Rachitsky at NeuStar.
 2008-06-06 17:33:35 +00:00
Daniel Stenberg
e7b5a8e6cb curl returns 0 for these options now 2008-06-01 22:10:21 +00:00
Daniel Stenberg
27eaf0cf02 now returns 0 2008-06-01 22:04:09 +00:00
Daniel Stenberg
f7815fa93c - Bug report #1973352 (http://curl.haxx.se/bug/view.cgi?id=1973352) identified 
how the HTTP redirect following code didn't properly follow to a new URL if
  the new url was but a query string such as "Location: ?moo=foo". Test case
  1031 was added to verify this fix.
 2008-05-26 20:39:41 +00:00
Dan Fandrich
d31da176eb Made sure to pass longs in to curl_easy_setopt where necessary in the 
libtest code.
 2008-05-22 21:49:52 +00:00
Daniel Stenberg
c1dfe2c529 wait for all 129 bytes 2008-05-13 21:43:37 +00:00
Daniel Stenberg
7f88e8badb Added test case 556 that uses curl_easy_send() and curl_easy_recv() 2008-05-13 21:42:07 +00:00
Yang Tse
ed80eb5b0f configure script will now define HAVE_CLOCK_GETTIME_MONOTONIC symbol only 
when function clock_gettime() is available and the monotonic timer is
also available. Otherwise, in some cases, librt or libposix4 could be used
for linking even when finally not using the clock_gettime() function due
to lack of the monotonic clock.
 2008-05-12 02:04:21 +00:00
Yang Tse
60dd765b3d fix syntax error: missing semicolon 2008-05-10 23:50:55 +00:00
Yang Tse
19479ea021 Internal time differences now use monotonic time source if available. 
This also implies the removal of the winmm.lib dependency for WIN32.
 2008-05-09 16:31:51 +00:00
Daniel Stenberg
fc9e0d2249 - Ben Van Hof filed bug report #1945240: "libcurl sometimes sends body twice 
when using CURL_AUTH_ANY" (http://curl.haxx.se/bug/view.cgi?id=1945240).
  The problem was that when libcurl rewound a stream meant for upload when it
  would prepare for a second request, it could accidentally continue the
  sending of the rewound data on the first request instead of on the second.
  Ben also provided test case 1030 that verifies this fix.
 2008-05-03 21:45:12 +00:00
Dan Fandrich
45edad84cb Document that variable replacement now takes place in the test file <stdout> section. 2008-05-01 17:48:00 +00:00
Daniel Stenberg
fd31f7e7e5 use variables to support other IPs and port numbers 2008-05-01 10:52:12 +00:00
Daniel Stenberg
7b2531da24 do variable replacement in the stdout data read from the test case 2008-05-01 10:51:16 +00:00
Dan Fandrich
848a13654d Added precheck for hard-coded test server address and port 2008-05-01 00:20:01 +00:00
Dan Fandrich
1cca8f5a30 Made file XML compatible 2008-05-01 00:18:16 +00:00
Daniel Stenberg
852989856d - To make it easier for applications that want lots of magic stuff done on 
redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now
  introduce the new CURLINFO_REDIRECT_URL option that lets applications
  extract the URL libcurl would've redirected to if it had been told to. This
  then enables the application to continue to that URL as it thinks is
  suitable, without having to re-implement the magic of creating the new URL
  from the Location: header etc. Test 1029 verifies it.
 2008-04-30 21:20:08 +00:00
Dan Fandrich
ab71654078 Added test 1028 to test an HTTP redirect to a FTP URL. 2008-04-29 02:30:09 +00:00
Yang Tse
b8193b6321 tests/libtest/delay.pl no longer used. The 'delay' attribute of the 
test harness <command> subsection now provides this functionality.
 2008-04-25 11:01:26 +00:00
Yang Tse
113d0937de Add 'timeout' and 'delay' attributes support for the test harness <command> subsection 2008-04-25 04:19:50 +00:00
Yang Tse
e0f0a2ccee <postcheck> delay no longer needed for this test. 
http://curl.haxx.se/mail/lib-2008-04/0392.html
 2008-04-23 23:58:00 +00:00
Yang Tse
96edebf4d9 improve synchronization between test harness runtests.pl script 
and test harness servers to minimize risk of false test failures.

http://curl.haxx.se/mail/lib-2008-04/0392.html
 2008-04-23 23:55:34 +00:00
Yang Tse
ad1dd08693 fix minor memory leak triggered upon test failure 2008-04-22 13:07:27 +00:00
Yang Tse
95fd093c4a Remove fflush() + fsync() previously introduced accelerated writing of 
server input and response request files of the test harness sws server.

Reintroduce, for test # 1001, the <postcheck> small delay. The delay is
needed even with the accelerated writing of server input and response
request files in test harness sws server.

http://curl.haxx.se/mail/lib-2008-04/0385.html
 2008-04-22 12:40:05 +00:00
Yang Tse
ed1ad28e29 Remove previously introduced small delay to verify if it can be avoided 
with the accelerated writing of server input and response request files
in test harness sws server.
 2008-04-22 00:23:18 +00:00
Dan Fandrich
768e3e796e Ignore the result of the postcheck command in torture mode 2008-04-21 17:19:44 +00:00
Dan Fandrich
3869d4a3a7 Make the test work with nroffs that use special escaping for bold output. 2008-04-21 16:57:27 +00:00
Yang Tse
a87c468c5c accelerate the writing of server input and response request files 
to disk, trying to defeat file and disk write-behind algorithms
 2008-04-20 19:15:08 +00:00
Dan Fandrich
7abf50a5c0 Added test cases 1026 and 1027 to do some rudimentary tests on the --manual 
and --help options.
 2008-04-18 22:31:52 +00:00
Yang Tse
d3f46eb61b test 1001 needs a small delay between client part execution and test 
result file verifications to allow the test server to completely write
out all files
 2008-04-18 17:25:54 +00:00
Yang Tse
72c58b0d1d test 1001 needs a small delay between client part execution and test 
result file verifications to allow the test server to completely write
out all files
 2008-04-18 17:17:14 +00:00
Yang Tse
6c89e1b311 fix compiler warning: enumerated type mixed with another type 2008-04-17 11:59:46 +00:00
Daniel Stenberg
0331071346 Added test case 555, a variation of 547 but using multi interface instead of 
easy. This was reported not working by Penugonda Chenna Reddy in
http://curl.haxx.se/mail/lib-2008-04/0046.html but I fail to repeat that
problem.
 2008-04-16 21:11:46 +00:00
Dan Fandrich
a9591ad1b7 Added test case 1025 to test a command-line cookie with Location: following 2008-04-10 18:18:55 +00:00
Dan Fandrich
c97d112b30 Added test case 1024 to test a scenario similar to the one reported 
by Ben Combee where libcurl would send the wrong cookie to a redirected
server.  libcurl was doing the right thing in this test case.
 2008-04-10 04:21:08 +00:00
Yang Tse
6fd3ff4032 fix compiler warning: argument is incompatible with corresponding format string conversion 2008-04-07 15:40:49 +00:00
Yang Tse
532d4b5106 SunSSH sshd ignores UsePrivilegeSeparation option 2008-04-04 14:47:32 +00:00
Yang Tse
5788719988 SunSSH 1.2 options sync 2008-04-04 14:08:36 +00:00
Daniel Stenberg
ac0b911eda oops, forgot to add test554 2008-04-04 11:39:32 +00:00
Dan Fandrich
10232bfe9e Added test627 to test SFTP with CURLOPT_NOBODY 2008-04-04 02:06:35 +00:00
Daniel Stenberg
a2314225e0 - Added CURLFORM_STREAM as a supported option to curl_formadd() to allow an 
application to provide data for a multipart with the read callback. Note
  that the size needs to be provided with CURLFORM_CONTENTSLENGTH when the
  stream option is used. This feature is verified by the new test case
  554. This feature was sponsored by Xponaut.
 2008-03-31 10:02:23 +00:00
Dan Fandrich
7f7b643c0d Made the test work on perl 5.00 2008-03-28 18:19:11 +00:00
Daniel Stenberg
95bd901efe - Fixed the problem with doing a zero byte SCP transfer, verified with test 
case 617 (which was added by Daniel Fandrich 5 Mar 2008).
 2008-03-22 22:00:21 +00:00
Gunter Knauf
c0a30b04c2 added --extvercmd parameter which can be used to specify an external command to display 'curl --version', f.e. with MinW32 crosscompile --extvercmd=/usr/bin/wine can be used. 2008-03-20 16:10:54 +00:00
Dan Fandrich
e9a460411f Fixed an infinite loop when given an invalid SFTP quote command. 2008-03-18 22:59:04 +00:00
Dan Fandrich
a57098ea9b Added test 626 to reproduce an infinite loop when given an invalid 
SFTP quote command reported by Vincent Le Normand, but left it disabled.
 2008-03-18 17:05:29 +00:00
Dan Fandrich
942daece00 Spell the commands right 2008-03-15 01:03:23 +00:00
Dan Fandrich
040a4443a1 Added tests 622-625 to test SFTP/SCP uploads. Test 625 was an attempt to 
reproduce the --ftp-create-dirs problem reported by Brian Ulm, but that
seems to need a call curl_easy_reset() which this test case doesn't do.
 2008-03-13 22:51:39 +00:00
Daniel Stenberg
fc9ad03e66 updated according to the name resolve race condition fix just committed 2008-03-11 22:58:52 +00:00
Dan Fandrich
458925ae0b Added tests 618-621 to test SFTP/SCP transfers of more than one file 
(test 620 tests the just-fixed problem reported by Brian Ulm).
 2008-03-10 19:40:27 +00:00
Michal Marek
e44dc92197 fixed typo 2008-03-10 14:32:19 +00:00
Dan Fandrich
b16ea66cec Added tests 616 and 617 to see how SFTP and SCP cope with zero-length 
files, as questioned by Mike Protts. SFTP does for me but SCP doesn't
so test 617 is disabled for now.
 2008-03-06 01:15:28 +00:00
Dan Fandrich
80cec5a62a Fixed the test harness so it will write out zero-length data files. 2008-03-06 01:11:43 +00:00
Yang Tse
6c2c281a7e fix log message used when unable to connect to destination port 2008-03-05 18:27:31 +00:00
Yang Tse
18cbb4d7d6 signal handling to properly cleanup on SIGINT and SIGTERM 2008-02-28 10:15:21 +00:00
Yang Tse
22e84d92b7 when terminating do it falling through cleanup code 2008-02-28 10:13:07 +00:00
Yang Tse
3d74649908 avoid inclusion of setup.h in util.h 2008-02-28 09:38:32 +00:00
Yang Tse
ed63d9d4de header inclusion cleanup 2008-02-28 00:55:06 +00:00
Yang Tse
8adc7038fe make comment more precise 2008-02-27 14:54:18 +00:00
Daniel Stenberg
b12fef3f31 Michal Marek's cleanup of how curl_easy_setopt() is used in examples and 
test code. Thanks to his curl_easy_setopt() typechecker work...
 2008-02-27 09:06:15 +00:00
Gunter Knauf
97a41f3646 trial to fix the HP-UX breakage... 2008-02-26 23:06:15 +00:00
Yang Tse
058e764af8 all reads from stdin and writes to stdout will be retried until the 
whole operation completes or an unrecoverable condition is detected
 2008-02-26 18:13:59 +00:00
Yang Tse
0d09f342c4 refactor some code out to write_pidfile() in util.c 2008-02-26 15:06:44 +00:00
Yang Tse
1d95109ffa Revert sockfilt.c back to revision 1.42 
Changes introduced in revision 1.43 were useless
 2008-02-22 09:31:18 +00:00
Yang Tse
064eebeaf1 Avoid timeout restart when signal caught while awaiting socket and stdin events 2008-02-20 17:17:18 +00:00
Daniel Stenberg
e6170eb20d - Fixed test case 405 to not fail when libcurl is built with GnuTLS 2008-02-20 12:18:08 +00:00
Daniel Stenberg
2c80bcbc81 made the non-matching error code output nicer since we know it is a number 
and the string contains a newline...
 2008-02-20 12:14:31 +00:00
Daniel Stenberg
55700cb01f - We no longer support setting the CURLOPT_URL option from inside a callback 
such as the CURLOPT_SSL_CTX_FUNCTION one treat that as if it was a Location:
  following. The patch that introduced this feature was done for 7.11.0, but
  this code and functionality has been broken since about 7.15.4 (March 2006)
  with the introduction of non-blocking OpenSSL "connects".

  It was a hack to begin with and since it doesn't work and hasn't worked
  correctly for a long time and nobody has even noticed, I consider it a very
  suitable subject for plain removal. And so it was done.
 2008-02-20 08:28:02 +00:00
Dan Fandrich
0cae201044 Added test309 to test HTTP redirect to HTTPS URL 2008-02-19 21:57:41 +00:00
Yang Tse
9df37b93df juggle() actually returns bool. 
Remove redundant and unreachable log message.
 2008-02-19 18:51:08 +00:00
Yang Tse
c9eb41c056 Reduce to 20 seconds the time allowed to set SO_REUSEADDR option on sockfilt listener socket. 
Log some more error descriptions.
 2008-02-18 20:13:30 +00:00
Yang Tse
23547fa2a0 sockfilt will quit when orphaned 2008-02-17 04:36:08 +00:00
Daniel Stenberg
11fae450fa make this test disabled properly when built with yassl 2008-02-13 21:36:24 +00:00
Yang Tse
cf9259dd92 verifyserver() actually returns the pid of the unsecure http and ftp servers 
when verifying the https and ftps servers
 2008-02-13 06:06:57 +00:00
Yang Tse
6634e3c3a3 On heavily loaded systems any test server start up can take longer than the 
timeout passed to startnew, when this happens startnew completes without being
able to read the pidfile and consequently returns a zero pid2.

To fix the above posibility the server pid is recovered from the verification
stage which will actually return the server pid when verification is valid.
 2008-02-12 13:47:56 +00:00
Yang Tse
533ae704a1 fix grammatical issues 2008-02-12 01:11:55 +00:00
Yang Tse
dc9fe9c361 shell startup scripts and possible influence in scp/sftp/socks tests 2008-02-11 20:21:06 +00:00
Dan Fandrich
75c369dcca Disable test due to keyword before disabling due to bad server. 2008-02-11 20:10:36 +00:00
Yang Tse
8f9e0357dd Additional SunSSH 1.1 ssh server options 2008-02-11 14:28:48 +00:00
Yang Tse
6942d313ff Verify only once test harness sftp server connectivity and functionality. 
Make sure that the sftp client tool uses the ssh client binary that we have
used to generate the configuration files, otherwise sftp might be using one
located in the preferred path compiled into sftp.
 2008-02-10 02:52:17 +00:00
Dan Fandrich
15e56c3284 Fixed some XML parsing problems. 2008-02-09 02:37:31 +00:00
Dan Fandrich
fc1443dcfc Added key words to all SSL-using tests so they can be skipped if necessary. 
Removed a few unnecessary requires SSL statements.
 2008-02-09 02:08:34 +00:00
Dan Fandrich
59e3651af3 Fixed test to use HTTPS as documented. 2008-02-09 02:01:36 +00:00
Dan Fandrich
f01d324c83 Missed checking in these test data files. 2008-02-08 18:42:12 +00:00
Yang Tse
405e192b8c Get rid of sftp subsystem additional parameters, they aren't widely supported 2008-02-08 17:32:58 +00:00
Yang Tse
1a340de0e5 To verify that the sftp server is actually running, responsive and that 
all curl's tests generated configuration and key files are fine, a real
connection is established to the test harness sftp server authenticating
and running a simple sftp remote pwd command.

The verification is done using OpenSSH's or SunSSH's sftp client tool with
a configuration file with the same options as the test harness socks server
with the exception that dynamic forwarding is not used for sftp.
 2008-02-08 13:54:02 +00:00
Dan Fandrich
ce1649564c Added tests 1022 and 1023 to validate output of curl-config --version and 
--vernum
 2008-02-08 01:21:03 +00:00
Yang Tse
bad6410d08 Don't try to compare more than strlen chars 2008-02-06 17:35:17 +00:00
Yang Tse
fecb67b246 Use a long int data type to handle getpid() result 2008-02-06 16:54:01 +00:00
Yang Tse
2c0956200f Fix buffer size specification. 
Improve handling of boundary conditions for huge requests.
 2008-02-05 18:37:53 +00:00
Yang Tse
acd9d72466 Minor variable type cleanups. 
Disable "swsbounce" mode when the received request
isn't for the same test and part number.
 2008-02-05 14:43:16 +00:00
Yang Tse
cd63a461d7 proper initialization of httprequest, no longer zeroing out twice 
the whole 150000+ bytes struct, and also removing an equally big
additional buffer for pipelining treatment.
 2008-02-05 02:21:38 +00:00
Yang Tse
03bbf4de48 When possible, use additional config options for test harness ssh server, 
which are deprecated in recent OpenSSH versions but are current for SunSSH.
 2008-01-31 16:37:16 +00:00
Daniel Stenberg
a62e155ca4 - Niklas Angebrand made the cookie support in libcurl properly deal with the 
"HttpOnly" feature introduced by Microsoft and apparently also supported by
  Firefox: http://msdn2.microsoft.com/en-us/library/ms533046.aspx . HttpOnly
  is now supported when received from servers in HTTP headers, when written to
  cookie jars and when read from existing cookie jars.
 2008-01-31 12:21:57 +00:00
Daniel Stenberg
7b9435890d add verbose output to test 509 for easier debugging 2008-01-29 23:10:25 +00:00
Daniel Stenberg
ceb5a8ca7b - Michal Marek fixed minor mistake in test case 553 that prevented it from 
working on other IP-addresses or port numbers.
 2008-01-29 12:31:11 +00:00
Yang Tse
8fca5c2e69 Dont rely on PAMAuthenticationViaKbdInt default being 'no' 2008-01-27 02:35:20 +00:00
Daniel Stenberg
5f2055729e added test 1021 to verify my fix for bug report #1879375 2008-01-26 00:13:38 +00:00
Yang Tse
69e540dfa6 improve request initialization for test harness HTTP server 2008-01-25 05:08:53 +00:00
Yang Tse
2198869eb1 Dmitry Kurochkin's test harness HTTP server pipelining fix fot test 530 2008-01-25 05:07:04 +00:00
Yang Tse
bdb2beb8e4 check availability of poll.h header at configuration time, and include 
it when sys/poll.h is unavailable
 2008-01-22 14:52:54 +00:00
Yang Tse
3caeb0a91f undo using internal *printf() clones for test #530 2008-01-21 05:35:08 +00:00
Yang Tse
a4eddf0d0d use internal *printf() clones since snprintf() not available on all platforms 2008-01-20 22:53:56 +00:00
Yang Tse
e9490fdbd9 Also disable GSSAPIAuthentication for the test harness ssh client 2008-01-20 04:05:25 +00:00
Daniel Stenberg
daadcfd1de Dmitry Kurochkin fixed test case 530 (pipelining) 2008-01-19 10:14:45 +00:00
Yang Tse
01d95b56a0 fix failure to properly detect SSH and SOCKS servers start up on loaded systems 2008-01-18 09:18:59 +00:00
Yang Tse
0530b0a5ca Don't abort tests 518 and 537 when unable to raise the open-file soft limit 2008-01-17 18:57:50 +00:00
Dan Fandrich
bcfc7d90d1 Put the comments in an XML-valid location. 2008-01-17 04:10:28 +00:00
Daniel Stenberg
c522f349fe Added test 553. This test case and code is based on the bug recipe Joe Malicki 
provided for bug report #1871269, fixed on Jan 14 2008 before the 7.18.0
release.
 2008-01-16 22:54:54 +00:00
Daniel Stenberg
6893fcaa9b remove trailing comma too, even though I don't think it does any harm 2008-01-16 22:09:51 +00:00
Daniel Stenberg
301ae1ae1b Nathan Coulter's patch that makes runtests.pl respect the PATH when figuring 
out what valgrind to run.
 2008-01-16 22:08:37 +00:00
Daniel Stenberg
b3de497d83 Dmitry Kurochkin worked a lot on improving the HTTP Pipelining support that 
previously had a number of flaws, perhaps most notably when an application
fired up N transfers at once as then they wouldn't pipeline at all that
nicely as anyone would think... Test case 530 was also updated to take the
improved functionality into account.
 2008-01-16 12:24:00 +00:00
Yang Tse
69f685056d startnew() shouldn't return a positive pid as reported in the pidfile 
by the spawned server itself unless it is actually alive
 2008-01-14 19:28:54 +00:00
Yang Tse
502da27d65 add client features part 2008-01-13 03:27:14 +00:00
Yang Tse
5004529685 Remove hardcoded verbosity 2008-01-12 04:32:03 +00:00
Yang Tse
2b63eb8511 Ooops 2008-01-12 00:12:16 +00:00
Yang Tse
f09fe4b49f Ooops 2008-01-11 21:59:05 +00:00
Yang Tse
35be09cf58 When verifying that test harness's SSH and SOCKS servers have been 
started check also that the process is actually alive, since they
could have died once the pidfile was written out
 2008-01-11 20:17:33 +00:00
Daniel Stenberg
08adf67969 Daniel Egger made CURLOPT_RANGE work on file:// URLs the very same way it 
already worked for FTP:// URLs
 2008-01-11 14:20:41 +00:00
Yang Tse
14ff7e75e0 Temporary change to help debugging SSH server verification failures 2008-01-10 16:19:14 +00:00
Yang Tse
c249a8aa1b Fix file Id 2008-01-09 01:11:59 +00:00
Yang Tse
fc794ae012 Add /usr/freeware/sbin and /usr/freeware/libexec to the ssh binaries 
locations search list.
 2008-01-09 00:58:48 +00:00
Yang Tse
32cc75d6cb Partially cleanup debugging messages in test harness, introduced for 
new minimum SSH version support for SCP, SFTP and SOCKS tests.

Some verbosity which still remains, will go out before next release.
 2008-01-08 20:12:43 +00:00
Yang Tse
1c0a19ad53 Remove increased loglevel intended to debug autobuild's publickey 
authentication failures when using OpenSSH 2.9.9 or SunSSH.

Verified fact: Even when only using publickey authentication,
OpenSSH and SunSSH first validate the user, this implies that
if the user validation fails, 'invalid user', the publickey
authentication will not be allowed to complete.
 2008-01-08 19:18:25 +00:00
Yang Tse
34d02d1969 Increase loglevel to debug autobuild's publickey authentication 
failures when using OpenSSH 2.9.9 or SunSSH
 2008-01-08 00:40:02 +00:00
Yang Tse
2408b236ca Display ssh server log and configuration upon socks server failure 2008-01-08 00:39:31 +00:00
Dan Fandrich
4acd437952 Fixed test description 2008-01-07 19:54:40 +00:00
Yang Tse
9c6533d287 Increase MaxAuthTries from 0 to 10. Using a value of 0 is too restrictive 2008-01-06 02:02:55 +00:00
Daniel Stenberg
3df484088f added keyword 2008-01-05 12:15:41 +00:00
Dan Fandrich
fcb2595ed6 "yes" must be in quotes to be XML compatible 2008-01-04 23:57:39 +00:00
Daniel Stenberg
fe0d7aee49 Daniel Egger provided 'nonewline=yes' support for the <stdout> section 2008-01-04 23:31:04 +00:00
Yang Tse
a4945fe687 Missing newline at end of message 2008-01-04 19:56:56 +00:00
Yang Tse
88d89b2177 Fix 'format string' compiler warning 2008-01-04 15:39:06 +00:00
Yang Tse
61a2d5ea75 'ControlPath' ssh client configuration file option requires OpenSSH 4.2 or 
later to accept 'none' as an indication to disable connection multiplexing
 2008-01-04 14:12:10 +00:00
Yang Tse
c479c64333 SunSSH 1.1 ssh client does not support config file options: 
ConnectTimeout
 ForwardX11Trusted
 HashKnownHosts
 RekeyLimit
 ServerAliveCountMax
 ServerAliveInterval
 2008-01-04 13:24:17 +00:00
Yang Tse
7a2177dc42 - Display curl_ssh_config when socks server fails to start. 
- Capability of running socks5 tests must be based on ssh daemon version
  and not on ssh client version.
 2008-01-04 13:00:40 +00:00
Yang Tse
bf6e2f28ba Make sure @INC is modified before 'using' the sshhelp module. 2008-01-04 03:05:33 +00:00
Yang Tse
f5da1e5484 'LocalCommand' no longer used for ssh client config file. When used it 
requires a non blank argument.
 2008-01-04 03:04:30 +00:00
Yang Tse
fd8d862c37 Modify test harness so that the minimum SSH version required to run 
SCP, SFTP and SOCKS4 tests is now OpenSSH 2.9.9 or SunSSH 1.0

For SOCKS5 tests minimum versions are OpenSSH 3.7 or SunSSH 1.0
 2008-01-03 20:48:22 +00:00
Daniel Stenberg
f277124a0f In an attempt to repeat the problem in bug report #1850730 
(http://curl.haxx.se/bug/view.cgi?id=1850730) I wrote up test case 552. The
test is doing a 70K POST with a read callback and an ioctl callback over a
proxy requiring Digest auth. The test case code is more or less identical to
the test recipe code provided by Spacen Jasset (who submitted the bug report).
 2007-12-26 21:48:52 +00:00
Dan Fandrich
9cd30c2012 Use getcwd() to get the directory, which works even if one of the directory 
components doesn't have read permission set.
 2007-12-22 18:25:43 +00:00
Dan Fandrich
d639ed1aaf Use getcwd() to get the directory, which works even if one of the 
directory components doesn't have read permission set.
 2007-12-20 21:21:43 +00:00
Daniel Stenberg
82c9379b6c spell! 2007-12-15 22:19:08 +00:00
Daniel Stenberg
c1730dc50a Add test 551 that tests callback-post over a proxy that requires Digest auth. 
A failed attempt to repeat bug report #1850730 (ie the test works fine).
 2007-12-15 22:13:07 +00:00
Dan Fandrich
26115aac5d Added missing <features> 2007-12-14 01:09:45 +00:00
Dan Fandrich
ca6b27aed2 Fixed typo in test title 2007-12-14 01:05:30 +00:00
Daniel Stenberg
963ef5414c add keywords 2007-12-08 22:56:17 +00:00
Daniel Stenberg
975812d246 add missing files 2007-12-08 22:56:05 +00:00
Daniel Stenberg
089668ec73 correct the comment about size 2007-12-08 22:53:49 +00:00
Daniel Stenberg
cc0ce38acc add test 549 and 550 2007-12-08 22:53:28 +00:00
Daniel Stenberg
7d3ea12b62 Spacen Jasset reported a problem with doing POST (with data read with a 
callback) over a proxy when NTLM is used as auth with the proxy. The bug
also concerned Digest and was limited to using callback only. Spacen worked
with us to provide a useful patch. I added the test case 547 and 548 to
verify two variations of POST over proxy with NTLM.
 2007-12-05 21:20:14 +00:00
Daniel Stenberg
59dc9085d1 fix compiler warning 2007-12-05 11:10:24 +00:00
Daniel Stenberg
4e4f33a297 added test548 which uses the lib547 source file, preparing for test547 which 
is supposed to repeat the bug report "NTLM proxy authentication with
CURLOPT_READDATA seems broken." posted on the curl-library mailing list on dec
3 2007.
 2007-12-05 11:08:56 +00:00
Daniel Stenberg
1f058f1014 removed the ;type= thing for FTP urls through proxy, since that's now only 
present when enabled by on option which isn't done by default (and isn't even
available for the curl app atm)
 2007-12-03 09:50:32 +00:00
Yang Tse
cf806748ec To allow remote log inspection avoid redirecting messages to stderr. 
Cleanup some debugging messages. Unlink log file on exit.
 2007-11-28 01:46:28 +00:00
Yang Tse
0c367fef94 ConnectTimeout requires OpenSSH 3.7 or later 2007-11-27 20:57:22 +00:00
Yang Tse
a418d290f1 Explicitly disallow remote hosts to connect to local forwarded ports, 
the socks server port in the test suite. This is the default setting
unless a tinkered built ssh is being used.
 2007-11-27 00:52:30 +00:00
Yang Tse
08cb30801c Stop ssh and socks servers when verification fails 2007-11-26 14:26:40 +00:00
Yang Tse
788de4f7ba Providing an explicit bind address besides the port for dynamic application-level 
port forwarding, our socks port, prevents ssh from running on some systems.

By default, ssh binds local port forwardings to the loopback address, since this
was the address being given as the explicit bind address, now it isn't given.
 2007-11-26 14:07:09 +00:00
Daniel Stenberg
05221e9056 test1015 --data-urlencode 2007-11-26 11:04:21 +00:00
Yang Tse
d59841618d Temporary change to better debug startup failures 
of test suite ssh and socks servers.
 2007-11-26 02:45:24 +00:00
Yang Tse
8d3964782a Allow different start timeout specification for each server 2007-11-25 03:55:53 +00:00
Yang Tse
5b809a3104 make 'checkdied' in runtests.pl more robust 2007-11-23 12:18:45 +00:00
Yang Tse
3daa54d636 Revert last change since it breaks running the test suite 
when builddir is different from srcdir.
 2007-11-23 09:50:44 +00:00
Yang Tse
8f1829d1d2 Improve chance of running runtests.pl from outside the 
source tree 'tests' directory
 2007-11-23 04:03:46 +00:00
Yang Tse
6efb6addf2 Debugging messages to trace startnew failures 2007-11-22 19:56:38 +00:00
Yang Tse
61e2e86aef Temporary change adding additional debugging messages to better pinpoint 
startup failures of test suite ssh and socks servers.
 2007-11-21 19:33:09 +00:00
Yang Tse
9b86eecb94 Fix trying to return outside of a subroutine 2007-11-21 17:50:30 +00:00
Yang Tse
6dfb5b4e1f Don't gather additional debug info unless sshd actually fails 2007-11-20 16:47:56 +00:00
Yang Tse
258c4686b2 Improve detection of sshd un/supported options. 
Gather additional debug info when the test suite ssh server fails to start.
 2007-11-20 14:10:09 +00:00
Yang Tse
5376d1047c This is a temporary change to test if OpenSSH 3.6 and SunSSH 1.1 
are good/compatible enough to run the test suite ssh server and
socks tests
 2007-11-19 17:20:32 +00:00
Yang Tse
968e943eac Temporary change to help debugging string(s) returned by sshd -V 
when sshd is not being identified as an OpenSSH daemon
 2007-11-19 01:49:28 +00:00
Yang Tse
536f98a766 Add /opt/ssh/sbin and /opt/ssh/libexec to the sshd locations search list. 
Improve wording of a couple of debug messages.
 2007-11-18 01:16:44 +00:00
Yang Tse
c4e5613a7d When unable to start test suite sshserver, log if OpenSSH has not been 
found or the OpenSSH version found
 2007-11-17 17:43:33 +00:00
Yang Tse
2b15823dab Add /usr/local/sbin and /usr/freeware/bin to the sshd locations search list 2007-11-17 02:28:54 +00:00
Daniel Stenberg
59dcc7e191 Michal Marek made the test suite remember what test servers that fail to 
start so that subsequent tries are simply skipped.
 2007-11-16 23:06:53 +00:00
Daniel Stenberg
44d408204a Michal Marek fixed the test suite to better deal with the case when the HTTP 
ipv6 server can't run.
 2007-11-15 22:41:31 +00:00
Yang Tse
ed636cbe44 Replace isupper with our uppercase macro version 2007-11-15 13:20:18 +00:00
Yang Tse
c960cd41e8 Fix comment 2007-11-08 16:32:31 +00:00
Dan Fandrich
c8355c27e9 Sort the directory listing because the server doesn't always do it. 2007-11-05 20:54:35 +00:00
Dan Fandrich
c2d7e2ae17 Added some keywords 2007-11-05 20:53:15 +00:00
Dan Fandrich
2f3d520571 Ignore more features that curl-config is not expected to know about 2007-11-01 21:20:24 +00:00
Dan Fandrich
8be493296d Make postcheck failure message more like the others 2007-11-01 17:42:39 +00:00
Dan Fandrich
6f33531861 Added test case 1014 to compare curl-config --features with curl --version 2007-11-01 03:09:27 +00:00
Dan Fandrich
16897354bc Added test case 1013 to check that curl-config --protocols matches the 
protocols listed in curl --version
 2007-11-01 00:36:55 +00:00
Dan Fandrich
6790c559af Detect curl source when valgrind provides an absolute source file name 2007-10-31 18:32:06 +00:00
Dan Fandrich
38cd2d781f Added test case 546 to check that subsequent FTP transfers work after a 
failed one using the multi interface
 2007-10-29 22:57:31 +00:00
Dan Fandrich
15feb8217f Fixed the 2000-series tests so that the downloaded data is actually checked 2007-10-27 01:04:36 +00:00
Dan Fandrich
59dccb34b0 Made the magic testnumber > 10000 support actually work 2007-10-27 01:02:57 +00:00
Dan Fandrich
e8057241c6 Fixed the test case to create only a single test file, which is all the 
test harness supports.
 2007-10-26 20:19:49 +00:00
Dan Fandrich
3f55ed0ef7 Check that all servers in the <server> section are supported, not just 
the first.
 2007-10-26 19:26:04 +00:00
Yang Tse
1d49c04545 Detect, log and avoid storing a request with a negative size. 2007-10-26 00:36:36 +00:00
Dan Fandrich
43885493ea Disable valgrind for this test to avoid the rlimit = soft rlimit problem 
found by Michal Marek.
 2007-10-25 21:49:45 +00:00
Dan Fandrich
1eac702c1a Added test case 2004. 
Disable valgrind in test case 1004 due to a libtool bug.
 2007-10-25 21:04:51 +00:00
Patrick Monnerat
0678a51d3b Allow test server to handle binary POSTs. 
Tests 35, 544 545 added: binary data POSTs.
 2007-10-25 19:40:05 +00:00
Dan Fandrich
b7dd186d36 When valgrind is disabled in the test file, don't run it at all (as opposed 
to running it and ignoring its output).
 2007-10-25 19:39:52 +00:00
Yang Tse
26c1c8b2ad Don't show valgrind log files of other tests 2007-10-25 18:07:13 +00:00
Daniel Stenberg
824aa5f918 Michal Marek fixed the test script to be able to use valgrind even when the 
lib is built shared with libtool.
 2007-10-25 14:30:51 +00:00
Daniel Stenberg
91e27ce755 Fixed a TFTP memory leak. Enabled test 2003 to verify this. 2007-10-25 07:47:38 +00:00
Dan Fandrich
65ed696625 Fixed the test TFTP server to support the >10000 test number notation 
Added test cases 2002 and 2003 (the latter disabled for now)
 2007-10-24 22:48:23 +00:00
Daniel Stenberg
3e3eaaada7 enable 2000 and 2001 2007-10-24 21:27:25 +00:00
Dan Fandrich
38649d1362 Added test cases 2000 and 2001 which test multiple protocols using the 
same easy handle
Fixed the filecheck: make target to work outside the source tree
 2007-10-24 19:40:07 +00:00
Dan Fandrich
4f00a02ba3 Fixed the test FTP server to support the >10000 test number notation 2007-10-24 19:39:29 +00:00
Patrick Monnerat
c67c54d4b3 Close log/server.input ASAP to avoid lengthy file lock on cygwin 2007-10-24 13:03:08 +00:00
Yang Tse
8e7da9464a Read callback should return 0 when no more data left 2007-10-23 15:10:48 +00:00
Yang Tse
92433e596b We use this ZERO_NULL to avoid picky compiler warnings, 
when assigning a NULL pointer to a function pointer var.
 2007-10-17 16:58:32 +00:00
Dan Fandrich
2741f97a69 Fixed a couple of typos that messed up the tests. 2007-10-12 02:09:45 +00:00
Dan Fandrich
d7fbe07ee2 Added some <keywords> sections and use some key words more consistently. 2007-10-12 01:44:22 +00:00
Dan Fandrich
2fce1f3e97 Fixed the -l option of runtests.pl 
Added support for skipping tests based on key words.
 2007-10-11 21:15:09 +00:00
Yang Tse
54bcde0a14 also log error message string 2007-10-09 23:24:28 +00:00
Yang Tse
660c86ce95 logmsg already appends '\n' 2007-10-09 23:21:29 +00:00
Daniel Stenberg
6dd6b4d1fa I enabled test 1009 and made the --local-port use a wide range to reduce the 
risk of failures.
 2007-10-04 21:26:26 +00:00
Daniel Stenberg
67d94514b0 Kim Rinnewitz reported that --local-port didn't work with TFTP transfers. 
This happened because the tftp code always uncondionally did a bind()
without caring if one already had been done and then it failed. I wrote a
test case (1009) to verify this, but it is a bit error-prone since it will
have to pick a fixed local port number and since the tests are run on so
many different hosts in different situations I add it in disabled state.
 2007-10-04 10:01:41 +00:00
Yang Tse
06be8bc389 On error, close "log/server.response" 2007-10-04 02:09:33 +00:00
Yang Tse
0ac5fd354b If TCP_NODELAY is not defined we can't disable the Nagle algorithm 2007-10-03 23:38:07 +00:00
Yang Tse
059707be32 Renamed a couple of global variables to avoid shadowing warnings 2007-10-02 16:05:28 +00:00
Daniel Stenberg
119364741e known bug #46: chunked-encoded CONNECT responses from a http proxy now works. 
Added test case 1008 to verify. Note that #47 is still there.
 2007-10-02 10:21:36 +00:00
Daniel Stenberg
8d1239c091 Disable the Nagle algorithm and send back responses in small chunks in an 
attempt to force smaller bits to get read by clients.
 2007-10-02 10:13:37 +00:00
Daniel Stenberg
9ca2644429 Added test536 that was accidentally missing. I also wrote up a new makefile 
target called 'filecheck' so that if you run 'make filecheck' in this directory
it'll check if the local files are also mentioned in the Makefile.am so that
they are properly included in release archives!
 2007-09-30 22:58:24 +00:00
Daniel Stenberg
ec08e2f9f2 Alex Fishman reported a curl_easy_escape() problem that was made the 
function do wrong on all input bytes that are >= 0x80 (decimal 128) due to a
signed / unsigned mistake in the code. I fixed it and added test case 543 to
verify.
 2007-09-30 22:40:24 +00:00
Yang Tse
b108c664ac Fix missing right parenthesis 2007-09-30 01:27:39 +00:00
Yang Tse
64db60397b Fix comparison between signed and unsigned 2007-09-30 01:01:43 +00:00
Dan Fandrich
9fc8800b6d Removed cut-and-paste cruft leading to fclose() of an unopened file 2007-09-27 17:22:10 +00:00
Dan Fandrich
16b95fc773 Enabled a few more gcc warnings with --enable-debug. Renamed a few 
variables to avoid shadowing global declarations.
 2007-09-27 01:45:22 +00:00
Daniel Stenberg
fd4cf78f36 Philip Langdale provided the new CURLOPT_POST301 option for 
curl_easy_setopt() that alters how libcurl functions when following
redirects. It makes libcurl obey the RFC2616 when a 301 response is received
after a non-GET request is made. Default libcurl behaviour is to change
method to GET in the subsequent request (like it does for response code 302
- because that's what many/most browsers do), but with this CURLOPT_POST301
option enabled it will do what the spec says and do the next request using
the same method again. I.e keep POST after 301.

The curl tool got this option as --post301

Test case 1011 and 1012 were added to verify.
 2007-09-26 12:44:59 +00:00
Daniel Stenberg
a6315359d7 Max Katsev reported that when doing a libcurl FTP request with 
CURLOPT_NOBODY enabled but not CURLOPT_HEADER, libcurl wouldn't do TYPE
before it does SIZE which makes it less useful. I walked over the code and
made it do this properly, and added test case 542 to verify it.
 2007-09-26 12:00:01 +00:00
Daniel Stenberg
775f86cb5a Immanuel Gregoire fixed KNOWN_BUGS #44: --ftp-method nocwd did not handle 
URLs ending with a slash properly (it should list the contents of that
directory). Test case 351 brought back and also test 1010 was added.
 2007-09-24 21:47:35 +00:00
Dan Fandrich
4686adb433 Added variable substitution to the <verify><file> section. 
Made a few more tests work remotely.
 2007-09-20 20:39:17 +00:00
Dan Fandrich
0159636373 Use double quotes in command lines for consistency. 2007-09-18 20:41:20 +00:00
Dan Fandrich
4f067b1d1c IPv6 is a required feature for these two tests, even if it's not obvious. 2007-09-18 17:41:04 +00:00
Dan Fandrich
ae60745e3e Fixed the required server entry 2007-09-17 23:23:13 +00:00
Dan Fandrich
7f496d8c3f Changed some FTP tests to validate the format of the PORT and EPRT commands 
sent by curl, if not the addresses themselves.
 2007-09-17 21:44:57 +00:00
Dan Fandrich
048c74f2fa Added %CLIENTIP and %CLIENT6IP data file substitution variables. 
Added hooks to the test suite to make it possible to test a curl running
on a remote host.
 2007-09-17 21:42:01 +00:00
Dan Fandrich
0ed57d370d Allow setting the IP address on which to listen for connections. 2007-09-17 21:39:34 +00:00
Dan Fandrich
9b11a84e74 Make the ftp server connect to the address given by curl in the PORT/EPRT 
instead of hard-coding it to 127.0.0.1
 2007-09-17 18:12:11 +00:00
Dan Fandrich
26f8de459a Made the directory postprocessor more forgiving of input directory format 2007-09-17 17:22:46 +00:00
Daniel Stenberg
e04151ed76 Michal Marek made libcurl automatically append ";type=<a|i>" when using HTTP 
proxies for FTP urls.
 2007-09-15 21:14:12 +00:00
Dan Fandrich
05e4a3026d Replaced 127.0.0.1 with %HOSTIP where possible 2007-09-14 19:32:31 +00:00
Daniel Stenberg
9e241864e3 Extracting the CURLINFO_PRIVATE pointer makes no point since nothing set 
it. This caused a segfault in some fprintf() implementations. Like on Solaris.
 2007-09-12 10:46:14 +00:00
Daniel Stenberg
9e88343a17 Daniel S (12 September 2007) 
- Bug report #1792649 (http://curl.haxx.se/bug/view.cgi?id=1792649) pointed
  out a problem with doing an empty upload over FTP on a re-used connection.
  I added test case 541 to reproduce it and to verify the fix.

- I noticed while writing test 541 that the FTP code wrongly did a CWD on the
  second transfer as it didn't store and remember the "" path from the
  previous transfer so it would instead CWD to the entry path as stored. This
  worked, but did a superfluous command. Thus, test case 541 now also verifies
  this fix.
 2007-09-11 22:23:57 +00:00
Dan Fandrich
d030dfa6e2 Added test case 1007 to test permission problem when uploading with TFTP 
(to validate bug #1790403).
 2007-09-07 20:05:20 +00:00
Dan Fandrich
6fd1cfeab1 Minor updates 2007-09-05 17:17:59 +00:00
Dan Fandrich
f6251734fc Added more accurate error code returns from SFTP operations. Added test 
case 615 to test an SFTP upload failure.
 2007-08-30 23:03:59 +00:00
Dan Fandrich
9f44a95522 Renamed several libcurl error codes and options to make them more general 
and allow reuse by multiple protocols. Several unused error codes were
removed.  In all cases, macros were added to preserve source (and binary)
compatibility with the old names.  These macros are subject to removal at
a future date, but probably not before 2009.  An application can be
tested to see if it is using any obsolete code by compiling it with the
CURL_NO_OLDIES macro defined.

Documented some newer error codes in libcurl-error(3)
 2007-08-30 20:34:57 +00:00
Dan Fandrich
5d4c981e13 Fixed a few compiler warnings. Try to do a slightly better job of 
cleaning up after an OOM condition in curl_multi_add_handle
 2007-08-30 18:26:19 +00:00
Dan Fandrich
5cb2ee878c Mention that 'make test' does more than just run all the tests (suggested 
by Kris/tinker105 in bug #1779054) and mention the torture tests.
 2007-08-28 18:23:19 +00:00
Daniel Stenberg
7cba40b218 Bug report #1779054 (http://curl.haxx.se/bug/view.cgi?id=1779054) pointed 
out that libcurl didn't deal with large responses from server commands, when
the single response was consisting of multiple lines but of a total size of
16KB or more. Dan Fandrich improved the ftp test script and provided test
case 1006 to repeat the problem, and I fixed the code to make sure this new
test case runs fine.
 2007-08-24 14:00:42 +00:00
Dan Fandrich
975fafdc49 Added test case 1005 to test excessively-long replies spread out over 
multiple lines (similar to test case 1003).
 2007-08-23 23:25:47 +00:00
Dan Fandrich
9537580ba2 Allow ftp server alternate replies to contain backslash-escaped control 
characters.
 2007-08-23 23:24:39 +00:00
Dan Fandrich
7ffae92daf Need even more time to wait for an accept. 2007-08-23 18:45:28 +00:00
Dan Fandrich
abca03cf36 Added test1004 to validate a previous fix for a memory leak when an 
empty proxy server is selected.
 2007-08-23 17:35:00 +00:00
Daniel Stenberg
381e372939 Bug report #1779054 (http://curl.haxx.se/bug/view.cgi?id=1779054) pointed 
out that libcurl didn't deal with very long (>16K) FTP server response lines
properly. Starting now, libcurl will chop them off (thus the client app will
not get the full line) but survive and deal with them fine otherwise. Test
case 1003 was added to verify this.
 2007-08-22 14:18:06 +00:00
Daniel Stenberg
c347db2e0a added a size > buffer size check to make it easier to track this in the 
future
 2007-08-22 14:09:13 +00:00
Daniel Stenberg
232a4553b8 Upped the buffer size to 17000+ bytes to prepare for the upcoming test 1003 
that verfies ridiculously long server response lines. Also changed sprintf
to snprintf in a few places.
 2007-08-22 13:57:49 +00:00
Dan Fandrich
1a8d8aa227 Increase timeout for accept for improved reliability on loaded servers. 2007-08-20 17:53:38 +00:00
Daniel Stenberg
014fe6971e remove stupid comment since there's no content in this test case 2007-08-17 22:24:51 +00:00
Daniel Stenberg
3217809294 Robson Braga Araujo filed bug report #1776235 
(http://curl.haxx.se/bug/view.cgi?id=1776235) about ftp requests with NOBODY
on a directory would do a "SIZE (null)" request. This is now fixed and test
case 1000 was added to verify.
 2007-08-17 22:22:43 +00:00
Daniel Stenberg
dcf698dc74 some keywords for future stats/coverage checks 2007-08-17 22:17:23 +00:00
Daniel Stenberg
54117be639 Moved the 5320 and 5322 into the 1000-series instead which is a documented 
range. They are about FTP but the 100-199 range is full.
 2007-08-17 22:11:25 +00:00
Daniel Stenberg
5a79532aee Song Ma provided a patch that cures a problem libcurl has when doing resume 
HTTP PUT using Digest authentication. Test case 5320 and 5322 were also
added to verify the functionality.
 2007-08-17 20:21:32 +00:00
Dan Fandrich
652e2cf57c Removed redundant dependency lines 2007-08-13 18:11:37 +00:00
Dan Fandrich
c7a66d5af4 There's no need to ignore the User-Agent for this test. 2007-08-09 03:28:16 +00:00
Dan Fandrich
2e60ca382d Fixed some icc compiler warnings. 2007-08-07 00:10:27 +00:00
Daniel Stenberg
6f750f3b57 Dmitriy Sergeyev reported a regression: resumed file:// transfers broke 
after 7.16.2. This is much due to the different treatment file:// gets
internally, but now I added test 231 to make it less likely to happen again
without us noticing!
 2007-08-02 14:09:08 +00:00
Dan Fandrich
5ecd56d964 Implemented only the parts of Patrick Monnerat's OS/400 patch that renamed 
some few internal identifiers to avoid conflicts, which could be useful on
other platforms.
 2007-07-23 18:51:22 +00:00
Dan Fandrich
cc44fb1dc8 Log the "<CMD> wasn't handled" error normally since it is now expected 
to occur in a couple of tests.
 2007-07-23 17:51:43 +00:00
Daniel Stenberg
4bbcc47f3f Added test case 354 that makes a simple FTP retrieval without password, which 
verifies the bug fix in #1757328.
 2007-07-22 10:08:59 +00:00
Daniel Stenberg
8ab495a088 test and verify curl -I on a single FTP file somewhat more than before 2007-07-21 21:49:23 +00:00
Daniel Stenberg
84e7bb85b1 To allow more flexibility in FTP test cases, I've removed the enforced states 
from the test server code as they served no real purpose. The test server is
here to serve for the test cases, not to attempt to function as a real server!
 2007-07-21 21:48:58 +00:00
Dan Fandrich
c7db74fe73 Revert the 512 change since newer versions of OpenSSH don't support DSA 
keys that small.
 2007-07-19 01:42:22 +00:00
Dan Fandrich
89d119646d Use 512 bit keys to reduce the time taken to generate them. This shouldn't 
really reduce security since in the common case of a daily automated build
the keys are only used for a single test run lasting a few minutes before
being deleted.
 2007-07-18 00:27:13 +00:00
Dan Fandrich
989dd9c34a Fixed test cases 613 and 614 by improving the log postprocessor to handle 
a new directory listing format that newer libssh2's can provide.  This
is probably NOT sufficient to handle all directory listing formats that
server's can provide and should be revisited.
 2007-07-17 21:53:38 +00:00
Daniel Stenberg
98b9349be7 make it do all three requests on the same connection 2007-07-16 21:44:46 +00:00
Daniel Stenberg
1da3d402f6 convert test case 540 to use a custom Host: header as well 2007-07-15 21:00:26 +00:00
Daniel Stenberg
1da3192d2d let's just export the whole argc + argv pair globally so that each test tool 
can take advantage of it however they see fit!
 2007-07-15 20:59:43 +00:00
Daniel Stenberg
15c8219340 Added test case 540 and lib540.c, the 'proxyauth.c' test app posted by Shmulik 
Regev on the libcurl mailing list on 10 Jul 2007, converted to a test case.
 2007-07-14 22:39:22 +00:00
Daniel Stenberg
5ae21ebde9 add support for arg3 as the third argument... 2007-07-14 22:38:18 +00:00
Daniel Stenberg
c7e0d8c30b add some better logging when HTTP server start fails, and make the failure 
really hard if the test server can't be resolved (like for ::1 ipv6)
 2007-07-14 22:33:46 +00:00
Daniel Stenberg
a53ba060c8 start the retry delay at 10 ms, double it for every failed attempt which makes 
it 10 seconds delay after 11 attempts
 2007-07-12 17:03:45 +00:00
Gunter Knauf
72bb5854f7 the timeout was probably too short with max = 1 sec, so lets test with 5 sec. 2007-07-12 10:54:15 +00:00
Gunter Knauf
0878b14f79 added time loop to sockfilt.c in order to wait for SO_REUSEADDR; 
added go_sleep() to util.c.
 2007-07-12 01:07:49 +00:00
Dan Fandrich
814b471d55 Added a code coverage section using gcc and gcov. 2007-07-10 22:55:51 +00:00
Dan Fandrich
19631f5d5f Force the time zone to GMT in the cookie tests in case the user is 
using one of the so-called 'right' time zones that take into account
leap seconds, which causes the tests to fail (as reported by
Daniel Black in bug report #1745964).
 2007-07-10 22:27:16 +00:00
James Housley
a8d6b40736 The previous commits changed the error code 2007-07-10 22:26:59 +00:00
Dan Fandrich
93bd512357 Fixed a curl memory leak reported by Song Ma with a modified version 
of the patch he suggested.  Added his test case as test289 to verify.
 2007-07-10 22:23:16 +00:00
Dan Fandrich
598bc3968e Add -a when running torture tests now that it's supported. 2007-07-05 01:38:00 +00:00
Gunter Knauf
c8a47bf662 revert previous patch since it turned out that older cp dont know this switch, argh! 2007-06-28 22:31:18 +00:00
James Housley
aed0cc6f2a Using fdopen() is a more correct way to implement the CURLOPT_NEW_FILE_PREMS 
file.c, but the debug interface was missing.  This adds the routines needed
to make the memory debuging work for fdopen().
 2007-06-28 11:11:29 +00:00
Gunter Knauf
5df5a2aa54 fixed nasty cp warnings about not beeing able to preserve ownership. 2007-06-28 01:20:30 +00:00
Daniel Stenberg
974fa1242a Adjusted how libcurl treats HTTP 1.1 responses without content-lenth or 
chunked encoding (that also lacks "Connection: close"). It now simply
assumes that the connection WILL be closed to signal the end, as that is how
RFC2616 section 4.4 point #5 says we should behave.
 2007-06-25 13:58:14 +00:00
Daniel Stenberg
a1b650ad7b Gerrit Bruchhuser pointed out a warning that the Intel(R) Thread Checker 
tool reports and it was indeed a legitimate one and it is one fixed. It was
a use of a share without doing the proper locking first.
 2007-06-21 14:23:38 +00:00
Daniel Stenberg
fc3c5dae87 and fix another flaw in the singlecwd case when we get ftp://site.com/, also 
from the #1739100 bug report
 2007-06-19 12:33:28 +00:00
Daniel Stenberg
cc26cc5dcd Test listing of root dir with the three ftp-methods. KNOWN_BUGS #44 make me 
disable test 351 by default by I add the test case anyway to make it easier
to work on this problem in the future.
 2007-06-18 21:04:05 +00:00
Daniel Stenberg
b0aa11fde7 Tom Regner added /usr/lib/misc to the path to scan for sftp to make the 
sftp tests run fine on gentoo
 2007-06-14 21:16:08 +00:00
Dan Fandrich
c45d44fee9 Wait longer for servers to start up since the ssh server needs to generate 
keys the first time (which can take a while on a slow or loaded host).
Enforce a longer startup wait time for the ssh client SOCKS server, too.
Check for an error code from startnew() when starting any server.
 2007-06-11 17:53:10 +00:00
Dan Fandrich
1e718a515a We do not use RSA keys in the test suite. 2007-06-11 17:49:25 +00:00
Dan Fandrich
477e27f99d Fixed the test harness so that it actually kills the ssh being used as 
the SOCKS server.
 2007-06-08 18:56:05 +00:00
Dan Fandrich
6a84d492f1 Improved compatibility with perl 5.0 on the 'open' calls. 2007-06-08 17:32:24 +00:00
Dan Fandrich
873d95a34c Incorporated Daniel Black's test706 and test707 SOCKS test cases. 2007-06-08 17:21:40 +00:00
Dan Fandrich
1500e95839 Improved compatibility with perl 5.0 on the 'open' calls. 2007-06-08 17:03:50 +00:00
Dan Fandrich
ad80490711 Changed the opens to work on older versions of perl. 
Redirect ssh output to ssh.log
 2007-06-07 22:42:26 +00:00
Dan Fandrich
073a6cea45 Renamed the sshd log file to sshd.log. 
Added more options to the ssh config file to improve the consistency of
the test environment.
Force a rewrite of the ssh config files on every invocation.
Changed the opens to work on older versions of perl.
 2007-06-07 21:42:33 +00:00
Dan Fandrich
345ffd1163 Cleaned up SOCKS tests. Use a magic port number instead of killserver 
to do nonlistening server tests, like other tests.
 2007-06-07 20:14:00 +00:00
Dan Fandrich
f0ffb35d55 Fixed some problems in starting SSH for use in SOCKS. 2007-06-07 19:49:09 +00:00
Daniel Stenberg
e86dfd9688 added 703: a socks5 version of 702 2007-06-05 13:52:34 +00:00
Daniel Stenberg
a466b31574 Daniel Black's test suite fixes and initial test cases for SOCKS4/5 using 
openssh
 2007-06-05 13:50:59 +00:00
Yang Tse
9583b51d80 In case of test failure, try not to show log files of other tests 2007-05-30 17:15:05 +00:00
Dan Fandrich
09fd3b4935 Match file times occurring in the morning. 2007-05-16 17:45:53 +00:00
Dan Fandrich
ea43bb013b Added support for quote commands before a transfer using SFTP and test 
case 614.
Allow SFTP quote commands chmod, chown, chgrp to set a value of 0.
 2007-05-15 00:28:50 +00:00
Dan Fandrich
b0a4c992e7 Added SFTP directory listing test case 613. 2007-05-14 22:03:42 +00:00
Dan Fandrich
85707460e5 Added FTPS upload tests 408 and 409. 2007-05-10 20:03:20 +00:00
Dan Fandrich
ed998270aa Added FTPS test cases 406 and 407 2007-05-08 22:14:30 +00:00
Dan Fandrich
6c8e6549d0 Check the return code from curl_multi_add_handle() 2007-05-02 06:02:13 +00:00
Dan Fandrich
5187faeeb9 Improved the test harness to allow running test servers on other than 
the default port numbers, allowing more than one test suite to run
simultaneously on the same host.
 2007-04-30 20:15:33 +00:00
Dan Fandrich
1228ec9fbb Fixed some tests to stop hard-coding the port number. 2007-04-30 19:05:48 +00:00
Dan Fandrich
f213d0db98 Added support in runtests.pl for "!n" test numbers to disable individual tests. 2007-04-25 23:18:52 +00:00
Dan Fandrich
9bdb05b4d6 When displaying log files, truncate the really longs ones such as you 
would get from a torture test.
 2007-04-25 20:09:32 +00:00
Dan Fandrich
61d7e720a5 Treat log files and -k the same when running torture tests as when not. 2007-04-24 23:28:57 +00:00
Dan Fandrich
17507eac85 Clear out FTP server options before each new client. 
Wait for child processes to die to avoid creating zombies.
 2007-04-24 21:30:39 +00:00
Dan Fandrich
6a35841b2e Added tests 610-612 to test more SFTP post-quote commands. 2007-04-23 23:00:38 +00:00
Dan Fandrich
28dde78dde Added <postcheck> support to the test harness. 2007-04-23 22:58:45 +00:00
Dan Fandrich
37171809f6 Mention NSS, <postcmd> commands 2007-04-23 21:18:30 +00:00
Dan Fandrich
3398eca7c3 Changed another nonexistent host name to be under the haxx.se domain 
to guarantee against it ever being valid.
 2007-04-23 01:51:02 +00:00
Dan Fandrich
043070f90e Changed an error message slightly so it can be caught easier by the 
autobuild logs scanner.
 2007-04-20 17:16:32 +00:00
Dan Fandrich
ae3d5949b8 Various test file cleanups, including using <servercmd> instead of writing 
directly to ftpserver.cmd and removing unneeded empty sections.
 2007-04-18 20:22:01 +00:00
Dan Fandrich
66fc5498d2 Added test cases 296, 297 and 298 to test --ftp-method handling 2007-04-18 06:30:28 +00:00
Daniel Stenberg
e3dab1bea2 jayjwa added the "DH PARAMETERS" to make this work with recent stunnels 2007-04-14 20:29:09 +00:00
Dan Fandrich
71a0d50f48 Added test cases 294 and 295 to test --ftp-account handling 2007-04-13 20:59:15 +00:00
Yang Tse
8d2a0fe85b Fix test case 534 which started to fail 2007-04-13 due to the existance 
of a new host on the net with the same silly domain the test was using
for a host which was supposed not to exist.
 2007-04-13 11:35:19 +00:00
Dan Fandrich
35935d71d2 Honour the -a option when -t is enabled. 2007-04-10 00:37:56 +00:00