It was used (intended) to pass in the size of the 'socks' array that is
also passed to these functions, but was rarely actually checked/used and
the array is defined to a fixed size of MAX_SOCKSPEREASYHANDLE entries
that should be used instead.
Closes#4169
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
If the state machine isn't complete, didn't fail and it didn't return
due to blocking it can just as well loop again.
This addresses the problem with SFTP directory listings where we would
otherwise return back to the parent and as the multi state machine
doesn't have any code for using CURLM_CALL_MULTI_PERFORM for as long the
doing phase isn't complete, it would return out when in reality there
was more data to deal with.
Fixes#3506Closes#3644
- no need to have them protocol specific
- no need to set pointers to them with the Curl_setup_transfer() call
- make Curl_setup_transfer() operate on a transfer pointer, not
connection
- switch some counters from long to the more proper curl_off_t type
Closes#3627
When a ssh session startup fails, it is useful to know why it has
failed. This commit changes the message from:
"Failure establishing ssh session"
to something like this, for example:
"Failure establishing ssh session: -5, Unable to exchange encryption keys"
Closes#3481
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
Ensure to clear the session object in case the libssh2 initialization
fails.
It could be argued that the libssh2 error function should be called to
get a proper error message in this case. But since the only error path
in libssh2_knownhost_init() is memory a allocation failure it's safest
to avoid since the libssh2 error handling allocates memory.
Closes#3179
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
This enables level 4 instead of the default level 3, which of the
currently used comments only allows /* FALLTHROUGH */ to silence the
warning.
Closes https://github.com/curl/curl/pull/2747
The list of state names (used in debug builds) was out of sync in
relation to the list of states (used in all builds).
I now added an assert to make sure the sizes of the two lists match, to
aid in detecting this mistake better in the future.
Regression since c92d2e14cf, shipped in 7.58.0.
Reported-by: Somnath Kundu
Fixes#2312Closes#2313
In case an identity didn't match[0], the state machine would fail in
state SSH_AUTH_AGENT instead of progressing to the next identity in
ssh-agent. As a result, ssh-agent authentication only worked if the
identity required happened to be the first added to ssh-agent.
This was introduced as part of commit c4eb10e2f0, which
stated that the "else" statement was required to prevent getting stuck
in state SSH_AUTH_AGENT. Given the state machine's logic and libssh2's
interface I couldn't see how this could happen or reproduce it and I
also couldn't find a more detailed description of the problem which
would explain a test case to reproduce the problem this was supposed to
fix.
[0] libssh2_agent_userauth returning LIBSSH2_ERROR_AUTHENTICATION_FAILED
Closes#2248
Figured out while reviewing code in the libssh backend. The pointer was
checked for NULL after having been dereferenced, so we know it would
always equal true or it would've crashed.
Pointed-out-by: Nikos Mavrogiannopoulos
Bug #2143Closes#2148
That also updates tests to expect the right error code
libssh2 back-end returns CURLE_SSH error if the remote file
is not found. Expect instead CURLE_REMOTE_FILE_NOT_FOUND
which is sent by the libssh backend.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
libssh is an alternative library to libssh2.
https://www.libssh.org/
That patch set also introduces support for ECDSA
ed25519 keys, as well as gssapi authentication.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
With this check present, scan-build warns that we might dereference this
point in other places where it isn't first checked for NULL. Thus, if it
*can* be NULL we have a problem on a few places. However, this pointer
should not be possible to be NULL here so I remove the check and thus
also three different scan-build warnings.
Closes#2111
returning 'time_t' is problematic when that type is unsigned and we
return values less than zero to signal "already expired", used in
several places in the code.
Closes#2021
... since the 'tv' stood for timeval and this function does not return a
timeval struct anymore.
Also, cleaned up the Curl_timediff*() functions to avoid typecasts and
clean up the descriptive comments.
Closes#2011
The required low-level logic was already available as part of
`libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1]
option.)
This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION`
(boolean) and the new `curl` command-line option `--compressed-ssh`
to request this `libssh2` feature. To have compression enabled, it
is required that the SSH server supports a (zlib) compatible
compression method and that `libssh2` was built with `zlib` support
enabled.
[1] https://www.libssh2.org/libssh2_session_flag.html
Ref: https://github.com/curl/curl/issues/1732
Closes https://github.com/curl/curl/pull/1735
... to make all libcurl internals able to use the same data types for
the struct members. The timeval struct differs subtly on several
platforms so it makes it cumbersome to use everywhere.
Ref: #1652Closes#1693
Add a new type of callback to Curl_handler which performs checks on
the connection. Alter RTSP so that it uses this callback to do its
own check on connection health.
... since the total amount is low this is faster, easier and reduces
memory overhead.
Also, Curl_expire_done() can now mark an expire timeout as done so that
it never times out.
Closes#1472
'left' is used as time_t but declared as long.
MinGW complains:
error: conversion to 'long int' from 'time_t {aka long long int}' may alter
its value [-Werror=conversion]
Changed the declaration to time_t.
* HTTPS proxies:
An HTTPS proxy receives all transactions over an SSL/TLS connection.
Once a secure connection with the proxy is established, the user agent
uses the proxy as usual, including sending CONNECT requests to instruct
the proxy to establish a [usually secure] TCP tunnel with an origin
server. HTTPS proxies protect nearly all aspects of user-proxy
communications as opposed to HTTP proxies that receive all requests
(including CONNECT requests) in vulnerable clear text.
With HTTPS proxies, it is possible to have two concurrent _nested_
SSL/TLS sessions: the "outer" one between the user agent and the proxy
and the "inner" one between the user agent and the origin server
(through the proxy). This change adds supports for such nested sessions
as well.
A secure connection with a proxy requires its own set of the usual SSL
options (their actual descriptions differ and need polishing, see TODO):
--proxy-cacert FILE CA certificate to verify peer against
--proxy-capath DIR CA directory to verify peer against
--proxy-cert CERT[:PASSWD] Client certificate file and password
--proxy-cert-type TYPE Certificate file type (DER/PEM/ENG)
--proxy-ciphers LIST SSL ciphers to use
--proxy-crlfile FILE Get a CRL list in PEM format from the file
--proxy-insecure Allow connections to proxies with bad certs
--proxy-key KEY Private key file name
--proxy-key-type TYPE Private key file type (DER/PEM/ENG)
--proxy-pass PASS Pass phrase for the private key
--proxy-ssl-allow-beast Allow security flaw to improve interop
--proxy-sslv2 Use SSLv2
--proxy-sslv3 Use SSLv3
--proxy-tlsv1 Use TLSv1
--proxy-tlsuser USER TLS username
--proxy-tlspassword STRING TLS password
--proxy-tlsauthtype STRING TLS authentication type (default SRP)
All --proxy-foo options are independent from their --foo counterparts,
except --proxy-crlfile which defaults to --crlfile and --proxy-capath
which defaults to --capath.
Curl now also supports %{proxy_ssl_verify_result} --write-out variable,
similar to the existing %{ssl_verify_result} variable.
Supported backends: OpenSSL, GnuTLS, and NSS.
* A SOCKS proxy + HTTP/HTTPS proxy combination:
If both --socks* and --proxy options are given, Curl first connects to
the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS
proxy.
TODO: Update documentation for the new APIs and --proxy-* options.
Look for "Added in 7.XXX" marks.
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
