Since curl 7.55.0, NetworkManager almost always failed its connectivity
check by timeout. I bisected this to 5113ad04 (http-proxy: do the HTTP
CONNECT process entirely non-blocking).
This patch replaces !Curl_connect_complete with Curl_connect_ongoing,
which returns false if the CONNECT state was left uninitialized and lets
the connection continue.
Closes#1803Fixes#1804
Also-fixed-by: Gergely Nagy
Add a new type of callback to Curl_handler which performs checks on
the connection. Alter RTSP so that it uses this callback to do its
own check on connection health.
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes#1280Closes#1462
... with a strlen() if no size was set, and do this in the pretransfer
function so that the info is set early. Otherwise, the default strlen()
done on the POSTFIELDS data never sets state.infilesize.
Reported-by: Vincas Razma
Bug: #1294
... since the total amount is low this is faster, easier and reduces
memory overhead.
Also, Curl_expire_done() can now mark an expire timeout as done so that
it never times out.
Closes#1472
If we use FTPS over CONNECT, the TLS handshake for the FTPS control
connection needs to be initiated in the SENDPROTOCONNECT state, not
the WAITPROXYCONNECT state. Otherwise, if the TLS handshake completed
without blocking, the information about the completed TLS handshake
would be saved to a wrong flag. Consequently, the TLS handshake would
be initiated in the SENDPROTOCONNECT state once again on the same
connection, resulting in a failure of the TLS handshake. I was able to
observe the failure with the NSS backend if curl ran through valgrind.
Note that this commit partially reverts curl-7_21_6-52-ge34131d.
When using basic-auth, connections and proxy connections
can be re-used with different Authorization headers since
it does not authenticate the connection (like NTLM does).
For instance, the below command should re-use the proxy
connection, but it currently doesn't:
curl -v -U alice:a -x http://localhost:8181http://localhost/
--next -U bob:b -x http://localhost:8181http://localhost/
This is a regression since refactoring of ConnectionExists()
as part of: cb4e2be7c6
Fix the above by removing the username and password compare
when re-using proxy connection at proxy_info_matches().
However, this fix brings back another bug would make curl
to re-print the old proxy-authorization header of previous
proxy basic-auth connection because it wasn't cleared.
For instance, in the below command the second request should
fail if the proxy requires authentication, but would succeed
after the above fix (and before aforementioned commit):
curl -v -U alice:a -x http://localhost:8181http://localhost/
--next -x http://localhost:8181http://localhost/
Fix this by clearing conn->allocptr.proxyuserpwd after use
unconditionally, same as we do for conn->allocptr.userpwd.
Also fix test 540 to not expect digest auth header to be
resent when connection is reused.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Closes https://github.com/curl/curl/pull/1350
This flag is meant for the current request based on authentication
state, once the request is done we can clear the flag.
Also change auth.multi to auth.multipass for better readability.
Fixes https://github.com/curl/curl/issues/1095
Closes https://github.com/curl/curl/pull/1326
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Michael Kaufmann
This fixes assertion error which occurs when redirect is done with 0
length body via HTTP/2, and the easy handle is reused, but new
connection is established due to hostname change:
curl: http2.c:1572: ssize_t http2_recv(struct connectdata *,
int, char *, size_t, CURLcode *):
Assertion `httpc->drain_total >= data->state.drain' failed.
To fix this bug, ensure that http2_handle_stream is called.
Fixes#1286Closes#1302
- While negotiating auth during PUT/POST if a user-specified
Content-Length header is set send 'Content-Length: 0'.
This is what we do already in HTTPREQ_POST_FORM and what we did in the
HTTPREQ_POST case (regression since afd288b).
Prior to this change no Content-Length header would be sent in such a
case.
Bug: https://curl.haxx.se/mail/lib-2017-02/0006.html
Reported-by: Dominik Hölzl
Closes https://github.com/curl/curl/pull/1242
Replace use of fixed macro BUFSIZE to define the size of the receive
buffer. Reappropriate CURLOPT_BUFFERSIZE to include enlarging receive
buffer size. Upon setting, resize buffer if larger than the current
default size up to a MAX_BUFSIZE (512KB). This can benefit protocols
like SFTP.
Closes#1222
* HTTPS proxies:
An HTTPS proxy receives all transactions over an SSL/TLS connection.
Once a secure connection with the proxy is established, the user agent
uses the proxy as usual, including sending CONNECT requests to instruct
the proxy to establish a [usually secure] TCP tunnel with an origin
server. HTTPS proxies protect nearly all aspects of user-proxy
communications as opposed to HTTP proxies that receive all requests
(including CONNECT requests) in vulnerable clear text.
With HTTPS proxies, it is possible to have two concurrent _nested_
SSL/TLS sessions: the "outer" one between the user agent and the proxy
and the "inner" one between the user agent and the origin server
(through the proxy). This change adds supports for such nested sessions
as well.
A secure connection with a proxy requires its own set of the usual SSL
options (their actual descriptions differ and need polishing, see TODO):
--proxy-cacert FILE CA certificate to verify peer against
--proxy-capath DIR CA directory to verify peer against
--proxy-cert CERT[:PASSWD] Client certificate file and password
--proxy-cert-type TYPE Certificate file type (DER/PEM/ENG)
--proxy-ciphers LIST SSL ciphers to use
--proxy-crlfile FILE Get a CRL list in PEM format from the file
--proxy-insecure Allow connections to proxies with bad certs
--proxy-key KEY Private key file name
--proxy-key-type TYPE Private key file type (DER/PEM/ENG)
--proxy-pass PASS Pass phrase for the private key
--proxy-ssl-allow-beast Allow security flaw to improve interop
--proxy-sslv2 Use SSLv2
--proxy-sslv3 Use SSLv3
--proxy-tlsv1 Use TLSv1
--proxy-tlsuser USER TLS username
--proxy-tlspassword STRING TLS password
--proxy-tlsauthtype STRING TLS authentication type (default SRP)
All --proxy-foo options are independent from their --foo counterparts,
except --proxy-crlfile which defaults to --crlfile and --proxy-capath
which defaults to --capath.
Curl now also supports %{proxy_ssl_verify_result} --write-out variable,
similar to the existing %{ssl_verify_result} variable.
Supported backends: OpenSSL, GnuTLS, and NSS.
* A SOCKS proxy + HTTP/HTTPS proxy combination:
If both --socks* and --proxy options are given, Curl first connects to
the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS
proxy.
TODO: Update documentation for the new APIs and --proxy-* options.
Look for "Added in 7.XXX" marks.
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
Previously it only held references to them, which was reckless as the
thread lock was released so the cookies could get modified by other
handles that share the same cookie jar over the share interface.
CVE-2016-8623
Bug: https://curl.haxx.se/docs/adv_20161102I.html
Reported-by: Cure53
Add the new option CURLOPT_KEEP_SENDING_ON_ERROR to control whether
sending the request body shall be completed when the server responds
early with an error status code.
This is suitable for manual NTLM authentication.
Reviewed-by: Jay Satiro
Closes https://github.com/curl/curl/pull/904
With HTTP/2 each transfer is made in an indivial logical stream over the
connection, making most previous errors that caused the connection to get
forced-closed now instead just kill the stream and not the connection.
Fixes#941
Hooked up the HTTP authentication layer to query the new 'is mechanism
supported' functions when deciding what mechanism to use.
As per commit 00417fd66c existing functionality is maintained for now.
- the expression of an 'if' was always true
- a 'while' contained a condition that was always true
- use 'if(k->exp100 > EXP100_SEND_DATA)' instead of 'if(k->exp100)'
- fixed a typo
Closes#889
- Change the parser to not require a minor version for HTTP/2.
HTTP/2 connection reuse broke when we changed from HTTP/2.0 to HTTP/2
in 8243a95 because the parser still expected a minor version.
Bug: https://github.com/curl/curl/issues/855
Reported-by: Andrew Robbins, Frank Gevaerts
Only protocols that actually have a protocol registered for ALPN and NPN
should try to get that negotiated in the TLS handshake. That is only
HTTPS (well, http/1.1 and http/2) right now. Previously ALPN and NPN
would wrongly be used in all handshakes if libcurl was built with it
enabled.
Reported-by: Jay Satiro
Fixes#789
curl_printf.h defines printf to curl_mprintf, etc. This can cause
problems with external headers which may use
__attribute__((format(printf, ...))) markers etc.
To avoid that they cause problems with system includes, we include
curl_printf.h after any system headers. That makes the three last
headers to always be, and we keep them in this order:
curl_printf.h
curl_memory.h
memdebug.h
None of them include system headers, they all do funny #defines.
Reported-by: David Benjamin
Fixes#743
Previously, connections were closed immediately before the user had a
chance to extract the socket when the proxy required Negotiate
authentication.
This regression was brought in with the security fix in commit
79b9d5f1a4Closes#655
Supports HTTP/2 over clear TCP
- Optimize switching to HTTP/2 by removing calls to init and setup
before switching. Switching will eventually call setup and setup calls
init.
- Supports new version to “force” the use of HTTP/2 over clean TCP
- Add common line parameter “--http2-prior-knowledge” to the Curl
command line tool.
Renamed the header and source files for this module as they are HTTP
specific and as such, they should use the naming convention as other
HTTP authentication source files do - this revert commit 260ee6b7bf.
Note: We could also rename curl_ntlm_wb.[c|h], however, the Winbind
code needs separating from the HTTP protocol and migrating into the
vauth directory, thus adding support for Winbind to the SASL based
protocols such as IMAP, POP3 and SMTP.
At one point during the development of HTTP/2, the commit 133cdd29ea
introduced automatic decompression of Content-Encoding as that was what
the spec said then. Now however, HTTP/2 should work the same way as
HTTP/1 in this regard.
Reported-by: Kazuho Oku
Closes#661
nghttp2 callback deals with TLS layer and therefore the header does not
need to be broken into chunks.
Bug: https://github.com/curl/curl/issues/659
Reported-by: Kazuho Oku
This commit adds trailer support in HTTP/2. In HTTP/1.1, chunked
encoding must be used to send trialer fields. HTTP/2 deprecated any
trandfer-encoding, including chunked. But trailer fields are now
always available.
Since trailer fields are relatively rare these days (gRPC uses them
extensively though), allocating buffer for trailer fields is done when
we detect that HEADERS frame containing trailer fields is started. We
use Curl_add_buffer_* functions to buffer all trailers, just like we
do for regular header fields. And then deliver them when stream is
closed. We have to be careful here so that all data are delivered to
upper layer before sending trailers to the application.
We can deliver trailer field one by one using NGHTTP2_ERR_PAUSE
mechanism, but current method is far more simple.
Another possibility is use chunked encoding internally for HTTP/2
traffic. I have not tested it, but it could add another overhead.
Closes#564
The push headers are freed after the push callback has been invoked,
meaning this code should only free the headers if the callback was never
invoked and thus the headers weren't freed at that time.
Reported-by: Davey Shafik
They tend to never get updated anyway so they're frequently inaccurate
and we never go back to revisit them anyway. We document issues to work
on properly in KNOWN_BUGS and TODO instead.
... and assign it from the set.fread_func_set pointer in the
Curl_init_CONNECT function. This A) avoids that we have code that
assigns fields in the 'set' struct (which we always knew was bad) and
more importantly B) it makes it impossibly to accidentally leave the
wrong value for when the handle is re-used etc.
Introducing a state-init functionality in multi.c, so that we can set a
specific function to get called when we enter a state. The
Curl_init_CONNECT is thus called when switching to the CONNECT state.
Bug: https://github.com/bagder/curl/issues/346Closes#346
Return 0 instead of NGHTTP2_ERR_CALLBACK_FAILURE if we can't locate the
SessionHandle. Apparently mod_h2 will sometimes send a frame for a
stream_id we're finished with.
Use nghttp2_session_get_stream_user_data and
nghttp2_session_set_stream_user_data to identify SessionHandles instead
of a hash.
Closes#372
Otherwise it would never be called for an HTTP/2 connection, which has
its own disconnect handler.
I spotted this while debugging <https://bugzilla.redhat.com/1248389>
where the http_disconnect() handler was called on an FTP session handle
causing 'dnf' to crash. conn->data->req.protop of type (struct FTP *)
was reinterpreted as type (struct HTTP *) which resulted in SIGSEGV in
Curl_add_buffer_free() after printing the "Connection cache is full,
closing the oldest one." message.
A previously working version of libcurl started to crash after it was
recompiled with the HTTP/2 support despite the HTTP/2 protocol was not
actually used. This commit makes it work again although I suspect the
root cause (reinterpreting session handle data of incompatible protocol)
still has to be fixed. Otherwise the same will happen when mixing FTP
and HTTP/2 connections and exceeding the connection cache limit.
Reported-by: Tomas Tomecek
Bug: https://bugzilla.redhat.com/1248389
Currently, libcurl rejects responses with "Content-Encoding: compress"
when CURLOPT_ACCEPT_ENCODING is set to "". I think that libcurl should
treat the Content-Encoding "compress" the same as other
Content-Encodings that it does not support, e.g. "bzip2". That means
just ignoring it.
With many easy handles using the same connection for multiplexing, it is
important we store and keep the transfer-oriented stuff in the
SessionHandle so that callbacks and callback data work fine even when
many easy handles share the same physical connection.
Error: CLANG_WARNING:
lib/http.c:173:16: warning: Value stored to 'http' during its initialization is never read
Error: COMPILER_WARNING:
lib/http.c: scope_hint: In function ‘http_disconnect’
lib/http.c:173:16: warning: unused variable ‘http’ [-Wunused-variable]
to allow code to act differently on the situation.
Also added some more info message for the connection re-use function to
make it clearer when connections are not re-used.
... from the connection struct. The stream one being the 'struct HTTP'
which is kept in the SessionHandle struct (easy handle).
lookup streams for incoming frames in the stream hash, hashing is based
on the stream id and we get the SessionHandle for the incoming stream
that way.
