Removed this pointer to a downloaded bytes counter because it was set in
smtp_init() to point to the same variable the transfer functions keep
the count in (k->bytecount), effectively making the code in transfer.c
"*k->bytecountp = k->bytecount" a no-op.
Removed user and passwd from the SMTP struct as these cannot be set on
a per-request basis and are leftover from legacy FTP code.
Changed some comments still using FTP terminology.
... since they're not used by the easy interface really, I wanted to
remove the association. Also, I unified the pingpong statemachine driver
into a single function with a 'wait' argument: Curl_pp_statemach.
Reworked the pp->endofresp() function so that the conndata, line and
line length are passed down to it just as with Curl_client_write()
rather than each implementation of the function having to query
these values.
Additionally changed the int return type to bool as this is more
representative of the function's usage.
Corrected the order of the upgrade_tls() functions and moved the handler
upgrade and getsock() functions out from the middle of the state related
functions.
Added honoring of the tls_supported flag when starting a TLS upgrade
rather than unconditionally attempting it. If the use_ssl flag is set
to CURLUSESSL_TRY and the server doesn't support TLS upgrades then the
connection will continue to authenticate. If this flag is set to
CURLUSESSL_ALL then the connection will complete with a failure as it
did previously.
Follow up fix to commit 62bd217464 to cater for servers that don't
respond with a 250 in their EHLO responses. Additionally updated the
SMTP tests to respond with a 250 response code as per RFC5321.
Fixed a small issue where smtp_endofresp() would look for capabilities
in the description part of a failure response. In theory a server
shouldn't respond with SIZE or AUTH in an EHLO command's failure
response but if it did then capabilities would be unnecessarily set
before eventually failing.
Changed the SMTP_AUTH_PASSWD state constant to SMTP_AUTH_LOGIN_PASSWD to
better describe the state as the second part of an AUTH LOGIN command,
as well as for consistency with the imap and pop3 modules.
Minor code tidy up to add comments similar to those used in the pop3
and imap end of resp functions, in order to assist anyone reading the
code and highlight the similarities between each of these protocols.
smtp_state_upgrade_tls() would attempt to incorrectly complete the
upgrade to smtps and start the EHLO command if
Curl_ssl_connect_nonblocking() returned a failure code and if ssldone
was set to TRUE. This would only happen when a non-blocking API hadn't
been provided by the SSL implementation and curlssl_connect() was
called underneath.
Remove internal separated behavior of the easy vs multi intercace.
curl_easy_perform() is now using the multi interface itself.
Several minor multi interface quirks and bugs have been fixed in the
process.
Much help with debugging this has been provided by: Yang Tse
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
SMTP client will send SIZE parameter in MAIL FROM command only if server
supports it. Without this patch server might say "504 Command parameter
not implemented" and reject the message.
Bug: http://curl.haxx.se/bug/view.cgi?id=3564114
Re-factored the smtp_state_*_resp() functions to 1) Match the constants
that were refactored in commit 00fddba672, 2) To be more readable and
3) To match their counterparties in pop3.c.
Corrected lines longer than 78 characters.
Removed unnecessary braces in smtp_state_helo_resp().
Introduced some comments in data sending functions.
Tidied up comments to match changes made in pop3.c.
Added a service type parameter to Curl_sasl_create_digest_md5_message()
to allow the function to be used by different services rather than being
hard coded to "smtp".
Rather than encoding the password message itself the
smtp_state_authpasswd_resp() function now delegates the work to the same
function that smtp_state_authlogin_resp() and smtp_authenticate() use
when constructing the encoded user name.
In preparation for moving to the SASL module re-factored the
smtp_auth_login_user() function to smtp_auth_login() so that it can be
used for both user names and passwords as sending both of these under
the login authentication mechanism is the same.
Move the SMTP_AUTH constants into a separate header file in
preparation for adding SASL based authentication to POP3 as the two
protocols will need to share them.
Due to the result code being reset to CURLE_OK when smtp_dophase_done()
was called, postdata would incorrectly be sent to the server when the
MAIL FROM or RCPT command was rejected.
As such, libcurl would return the wrong result code from performing the
operation and additionally set CURLINFO_RESPONSE_CODE to be that
returned by the postdata command.
Bug: http://curl.haxx.se/mail/lib-2012-05/0108.html
Reported by: Gokhan Sengun
A dot character at the beginning of a line would not be escaped to a
double dot as required by RFC-2821, instead it would be deleted by the
mail server. Please see section 4.5.2 of the RFC for more information.
Note: This fix also simplifies the detection of repeated CRLF.CRLF
combinations, such as CRLF.CRLF.CRLF, a little rather than having to
advance the eob counter to 2.
Moved the server greeting response handling code from the statemach_act
functions to separate response functions. This makes the code simpler
to follow and provides consistency with the other responses that are
handled here.
Changed the returned curl error codes for EHLO and HELO responses from
CURLE_LOGIN_DENIED to CURLE_REMOTE_ACCESS_DENIED as a negative response
from these commands represents no service as opposed to a login error.
Curl_protocol_connect() now does the tunneling through the HTTP proxy if
requested instead of letting each protocol specific connection function
do it.
Set the conn->data->info.httpcode variable in smtp_statemach_act() to
allow Curl_getinfo() to return the SMTP response code via the
CURLINFO_RESPONSE_CODE action.
Curl_smtp_escape_eob() would leave off final CRLFs from emails ending
in multiple blank lines additionally leaving the smtpc->eob variable
with the character count in, which would cause problems for additional
emails when sent through multiple calls to curl_easy_perform() after a
CURLOPT_CONNECT_ONLY.
Fixed the use of angled brackets "<>" in the optional AUTH parameter as
per RFC-2554 section 5. The address should not include them but an
empty address should be replaced by them.
Added a new CURLOPT_MAIL_AUTH option that allows the calling program to
set the optional AUTH parameter in the MAIL FROM command.
When this option is specified and an authentication mechanism is used
to communicate with the mail server then the AUTH parameter will be
included in the MAIL FROM command. This is particularly useful when the
calling program is acting as a relay in a trusted environment and
performing server to server communication, as it allows the relaying
server to specify the address of the mailbox that was used to
authenticate and send the original email.
Fixed incorrect behavior in smtp_done() which would cause the end of
block data to be sent to the SMTP server if libcurl was operating in
connect only mode. This would cause the server to return an error as
data would not be expected which in turn caused libcurl to return
CURLE_RECV_ERROR.
Protocols (IMAP, POP3 and SMTP) that use the path part of a URL in a
decoded manner now use the new Curl_urldecode() function to reject URLs
with embedded control codes (anything that is or decodes to a byte value
less than 32).
URLs containing such codes could easily otherwise be used to do harm and
allow users to do unintended actions with otherwise innocent tools and
applications. Like for example using a URL like
pop3://pop3.example.com/1%0d%0aDELE%201 when the app wants a URL to get
a mail and instead this would delete one.
This flaw is considered a security vulnerability: CVE-2012-0036
Security advisory at: http://curl.haxx.se/docs/adv_20120124.html
Reported by: Dan Fandrich
The STARTTLS response code in SMTP, POP3 and IMAP would return
CURLE_LOGIN_DENIED rather than CURLE_USE_SSL_FAILED when SSL/TLS
was not available on the server.
Reported by: Gokhan Sengun
Bug: http://curl.haxx.se/mail/lib-2012-01/0018.html
By setting PROTOPT_NOURLQUERY in the protocol handler struct, the
protocol will get the "query part" of the URL cut off before the data is
handled by the protocol-specific code. This makes libcurl adhere to
RFC3986 section 2.2.
Test 1220 is added to verify a file:// URL with query-part.
Now called 'use_ssl' instead, which better matches the current CURLOPT
name and since the option is used for all pingpong protocols (at least)
it makes sense to not use 'ftp' in the name.
After a PORT has been issued, and the multi handle would switch to the
CURLM_STATE_DO_MORE state (which is unique for FTP), libcurl would
return the wrong fdset to wait for when curl_multi_fdset() is
called. The code would blindly assume that it was waiting for a connect
of the second connection, while that isn't true immediately after the
PORT command.
Also, the function multi.c:domore_getsock() was highly FTP-centric and
therefore ugly to keep in protocol-agnostic code. I solved this problem
by introducing a new function pointer in the Curl_handler struct called
domore_getsock() which is only called during the DOMORE state for
protocols that set that pointer.
The new ftp.c:ftp_domore_getsock() function now returns fdset info about
the control connection's command/response handling while such a state is
in use, and goes over to waiting for a writable second connection first
once the commands are done.
The original problem could be seen by running test 525 and checking the
time stamps in the FTP server log. I can verify that this fix at least
fixes this problem.
Bug: http://curl.haxx.se/mail/lib-2011-10/0250.html
Reported by: Gokhan Sengun
Modified smtp_endofresp() to detect NTLM from the server specified list
of supported authentication mechanisms.
Modified smtp_authenticate() to start the sending of the NTLM data.
Added smtp_auth_ntlm_type1_message() which creates a NTLM type-1
message. This function is used by authenticate() to start the sending
of data and by smtp_state_auth_ntlm_resp() when the AUTH command
doesn't contain the type-1 message as part of the initial response.
This lack of initial response can happen if an OOM error occurs or the
type-1 message is longer than 504 characters. As the main AUTH command
is limited to 512 character the data has to be transmitted in two
parts; one containing the AUTH NTLM and the second containing the
type-1 message.
Added smtp_state_auth_ntlm_type2msg_resp() which handles the incoming
type-2 message and sends an outgoing type-3 message. This type-2
message is sent by the server in response to our type-1 message.
Modified smtp_state_auth_resp() to handle the response to: the AUTH
NTLM without the initial response and the type-2 response.
Modified smtp_disconnect() to cleanup the NTLM SSPI stack.
Changed the name of variable l, in several functions, which represents
the length of strings being sent to the server, to len which is more
meaningful and consistent with other code in smtp.c and elsewhere.
Reworked smtp_authenticate() to be simpler and easier to follow.
Variables and now initialised in their definitions and if no username
and password are specified the function sets the state to SMTP_STOP and
returns immediately, rather than being part of a huge if statement.
