Daniel Stenberg
090f5a9a45
added the new test 282
2006-11-25 13:32:48 +00:00
Daniel Stenberg
da58d03ff7
Venkat Akella found out that libcurl did not like HTTP responses that simply
...
responded with a single status line and no headers nor body. Starting now, a
HTTP response on a persistent connection (i.e not set to be closed after the
response has been taken care of) must have Content-Length or chunked
encoding set, or libcurl will simply assume that there is no body.
To my horror I learned that we had no less than 57(!) test cases that did bad
HTTP responses like this, and even the test http server (sws) responded badly
when queried by the test system if it is the test system. So although the
actual fix for the problem was tiny, going through all the newly failing test
cases got really painful and boring.
2006-11-25 13:32:04 +00:00
Daniel Stenberg
9ea3831c08
James Housley fixed SCP downloading by setting the maxdownload.
2006-11-25 09:49:29 +00:00
Yang Tse
a46f55b9de
Make sure RETSIGTYPE is properly defined
2006-11-25 01:02:52 +00:00
Daniel Stenberg
a634f64400
James Housley did lots of work and introduced SFTP downloads.
2006-11-24 22:14:39 +00:00
Yang Tse
bcd8a3b240
Define HAVE_SIGNAL_H, HAVE_SIG_ATOMIC_T and HAVE_SIG_ATOMIC_T_VOLATILE
...
as appropriate for platforms that don't have autotools support
2006-11-24 16:38:58 +00:00
Daniel Stenberg
04d5d1895c
Michael Wallner fixed this problem: When I set domains in the options
...
struct, and there are domain/search entries in /etc/resolv.conf, the domains
of the options struct will be overridden.
2006-11-22 22:54:41 +00:00
Daniel Stenberg
abd2775a70
Install ares_dns.h too
2006-11-22 22:51:01 +00:00
Yang Tse
73226415fc
Added a check in configure that verifies if <signal.h> is available,
...
defining HAVE_SIGNAL_H if the header is available.
Added a check in configure that tests if the sig_atomic_t type is
available, defining HAVE_SIG_ATOMIC_T if it is available. Providing
a suitable default in setup_once.h if not available.
Added a check in configure that tests if the sig_atomic_t type is
already defined as volatile, defining HAVE_SIG_ATOMIC_T_VOLATILE
if it is available and already defined as volatile.
2006-11-22 18:41:34 +00:00
Daniel Stenberg
ab160ef445
new french mirror
2006-11-21 07:45:49 +00:00
Yang Tse
268fe09322
Revert ftpserver.pl back to revision 1.74 Adding change done in 1.76
...
This is done to back out changes done in revisions 1.77 and 1.75
2006-11-20 16:58:41 +00:00
Yang Tse
7a557e984a
Revert runtests.pl back to revision 1.212
...
This is done to back out changes done from revisions 1.213 to 1.217
2006-11-20 16:58:04 +00:00
Yang Tse
f1a55cbe6d
Revert ftp.pm back to revision 1.5 Adding copyright notice.
...
This is done to back out changes done from revisions 1.6 to 1.10
2006-11-20 16:57:01 +00:00
Yang Tse
1e35d95df8
Add some message logging
2006-11-20 10:35:25 +00:00
Yang Tse
d8387b418d
stop slaves before stopping servers
2006-11-20 06:22:51 +00:00
Yang Tse
adea16a294
Revert to KILL test servers until all test servers
...
have proper TERM and INT signal handlers implemented.
2006-11-20 03:25:17 +00:00
Daniel Stenberg
7f2d5cab2d
log the sleep, like when done in test 190
2006-11-19 22:48:40 +00:00
Daniel Stenberg
c6ff612f6e
Frank Teo provided an updated, mostly docs changed
2006-11-19 21:55:34 +00:00
Yang Tse
8db353e1d7
Avoid passing child pid and test server pid, using the running
...
servers hash, and adjust message arguments accordingly.
2006-11-19 03:47:56 +00:00
Yang Tse
e6978117a7
Comment out the use of the "warnings" module now that ftp.pm seems to
...
be clear of warnings. Uncomment it if this module is further modified.
The "warnings" module requires perl 5.006 or later. Previous perl
versions don't have it and die on missing modules.
2006-11-19 03:47:11 +00:00
Daniel Stenberg
5dcb055077
new ruby binding, new tclcurl release
2006-11-18 14:46:33 +00:00
Yang Tse
0b5e1a9b2f
Avoid keeping dupe pids When forked pid and test server pid is the same one.
2006-11-18 04:07:01 +00:00
Yang Tse
2e17a97474
Fix warning "Use of uninitialized value in ...".
...
If the list has only one item avoid sort subroutine.
2006-11-18 04:05:42 +00:00
Yang Tse
74ddbd8a3b
The hash of running servers is now a hash of hashes which for each running
...
server holds not only its two main pids, but also the pidfile of the test
server and the 'slavepidfiles' for ftp* servers. This allows a better control
when stopping servers.
Now from runtests.pl when test servers are stopped they are signalled in
sequence TERM, INT and KILL allowing time in between for them to die. This
will give us a chance of gracefully stopping test servers, which we didn't
have when we were killing them in first instance.
2006-11-17 16:44:22 +00:00
Gisle Vanem
b8039a821b
Call libssh2_session_free() to release memory allocated during
...
libssh2 startup.
2006-11-15 05:35:35 +00:00
Gisle Vanem
438312f00e
Free 'scp->path' in case of libssh2 setup failure.
2006-11-14 20:26:13 +00:00
Daniel Stenberg
381ccaa391
Ron in bug #1595348 ( http://curl.haxx.se/bug/view.cgi?id=1595348 ) pointed
...
out a stack overwrite (and the corresponding fix) on 64bit Windows when
dealing with HTTP chunked encoding.
2006-11-13 17:29:07 +00:00
Daniel Stenberg
3204494883
bug #1595348 by Ron pointed out this flaw and fix
2006-11-13 17:26:43 +00:00
Daniel Stenberg
e264f699d4
Tor Arntsen spotted this mistake
2006-11-13 13:48:55 +00:00
Daniel Stenberg
68d4b77d44
we did 1.3.2 and are now on the 1.3.3 track!
2006-11-11 22:23:48 +00:00
Daniel Stenberg
e1ac99af1f
fix header to match actual proto
2006-11-11 22:05:33 +00:00
Daniel Stenberg
be0d17e812
cleaned up Curl_write() and the sub functions it uses for various protocols.
...
They all now return ssize_t to Curl_write().
Unfortunately, Curl_read() is in a sorrier state but it too would benefit from
a similar cleanup.
2006-11-11 21:34:43 +00:00
Daniel Stenberg
4eb35406f4
Nir Soffer updated libcurl.framework.make: fix symlinks, should link to
...
Versions, not to ./Versions and indentation improvments
2006-11-09 21:58:28 +00:00
Daniel Stenberg
624745ab20
Dmitriy Sergeyev found a SIGSEGV with his test04.c example posted on 7 Nov
...
2006. It turned out we wrongly assumed that the connection cache was present
when tearing down a connection.
2006-11-09 21:54:33 +00:00
Daniel Stenberg
9354822e09
Ciprian Badescu found a SIGSEGV when doing multiple TFTP transfers using the
...
multi interface, but I could also repeat it doing multiple sequential ones
with the easy interface. Using Ciprian's test case, I could fix it.
2006-11-09 21:36:18 +00:00
Yang Tse
17d4f9513e
Remove showing stderr log files unconditionally for tests 518 and 537.
...
Add failure checking for servers when fork()ed.
Use same code path in 'stopserver' when called with a single or multiple pids.
2006-11-09 13:20:42 +00:00
Daniel Stenberg
f830d77307
Bradford Bruce reported that when setting CURLOPT_DEBUGFUNCTION without
...
CURLOPT_VERBOSE set to non-zero, you still got a few debug messages from the
SSL handshake. This is now stopped.
2006-11-08 21:49:14 +00:00
Daniel Stenberg
a03c76b228
ok stop using old and deprecated options
2006-11-08 08:49:27 +00:00
Daniel Stenberg
35ad61429d
add missing names
2006-11-07 15:21:11 +00:00
Daniel Stenberg
b5b3d9e5c7
Olaf fixed a leftover problem with the CONNECT fix of his that would leave a
...
wrong error message in the error message buffer.
2006-11-07 14:07:02 +00:00
Gisle Vanem
6e682c2b01
Moved select_s() to Makefile.dj since select() is used in applications.
2006-11-07 13:29:15 +00:00
Gisle Vanem
7e2ea2ece0
Update copyright year.
2006-11-07 13:20:01 +00:00
Yang Tse
01926d66d7
add TODO note
2006-11-06 18:28:34 +00:00
Yang Tse
69f7d0a0ce
compiler warning fix
2006-11-06 18:27:25 +00:00
Yang Tse
d1c84705ec
remove redundant check for Win32
2006-11-06 18:26:36 +00:00
Yang Tse
3274908551
avoid a couple of potential zero size memory allocations
2006-11-06 13:56:51 +00:00
Daniel Stenberg
c730934498
mention the areslib.dsp fix
2006-11-05 23:11:22 +00:00
Daniel Stenberg
471a8b223b
add the recent crowd of contributors
2006-11-05 23:11:07 +00:00
Daniel Stenberg
47ee9202c3
Andreas Rieke fixed back the correct line endings!
2006-11-05 23:08:11 +00:00
Yang Tse
1bcbe89802
Prevent multiple initialization of memdebug configuration variables.
...
This was possible on debug c-ares enabled builds when both CURL_MEMDEBUG
and CARES_MEMDEBUG environment variables were set. Leading to a file handle
leak even when both variables had the same value, and wierd test suite
results when different.
2006-11-05 12:42:50 +00:00
