With the curl memory tracking feature decoupled from the debug build feature,
CURLDEBUG and DEBUGBUILD preprocessor symbol definitions are used as follows:
CURLDEBUG used for curl debug memory tracking specific code (--enable-curldebug)
DEBUGBUILD used for debug enabled specific code (--enable-debug)
out that the cookie parser would leak memory when it parses cookies that are
received with domain, path etc set multiple times in the same header. While
such a cookie is questionable, they occur in the wild and libcurl no longer
leaks memory for them. I added such a header to test case 8.
as reported by Ebenezer Ikonne (on curl-users) and Laurent Rabret (on
curl-library). The transfer was mistakenly marked to get more data to send
but since it didn't actually have that, it just hung there...
If the CURLOPT_PORT option is used on an FTP URL like
"ftp://example.com/file;type=A" the ";type=A" is stripped off.
I added test case 562 to verify, only to find out that I couldn't repeat
this bug so I hereby consider it not a bug anymore!
I've now made TFTP "connections" not being kept for re-use within libcurl.
TFTP is UDP-based so the benefit was really low (if even existing) to begin
with so instead of tracking down to fix this problem we instead removed the
re-use. I also enabled test case 1099 that I wrote a few days ago to verify
that this change fixes the reported problem.
proxy. libcurl would then wrongly close the connection after each
request. In his case it had the weird side-effect that it killed NTLM auth
for the proxy causing an inifinite loop!
I added test case 1098 to verify this fix. The test case does however not
properly verify that the transfers are done persistently - as I couldn't
think of a clever way to achieve it right now - but you need to read the
stderr output after a test run to see that it truly did the right thing.
version 1.1 instead of 1.0 like before. This change also introduces the new
proxy type for libcurl called 'CURLPROXY_HTTP_1_0' that then allows apps to
switch (back) to CONNECT 1.0 requests. The curl tool also got a --proxy1.0
option that works exactly like --proxy but sets CURLPROXY_HTTP_1_0.
I updated all test cases cases that use CONNECT and I tried to do some using
--proxy1.0 and some updated to do CONNECT 1.1 to get both versions run.
(http://curl.haxx.se/bug/view.cgi?id=2535504) pointing out that realms with
quoted quotation marks in HTTP Digest headers didn't work. I've now added
test case 1095 that verifies my fix.
clarity. This does fix one problem that causes ;type=i FTP URLs
to fail in the Turkish locale when CURLOPT_PROXY_TRANSFER_MODE is
used (test case 561)
Added tests 561 and 1092 through 1094 to test various combinations
of ;type= and ;mode= URLs that could potentially fail in the Turkish
locale.
researching it, it turned out he got a 550 response back from a SIZE command
and then I fell over the text in RFC3659 that says:
The presence of the 550 error response to a SIZE command MUST NOT be taken
by the client as an indication that the file cannot be transferred in the
current MODE and TYPE.
In other words: the change I did on September 30th 2008 and that has been
included in the last two releases were a regression and a bad idea. We MUST
NOT take a 550 response from SIZE as a hint that the file doesn't exist.
This test was added after the HTTPS-using-multi-interface with OpenSSL
regression of 7.19.1 to hopefully prevent this embarassing mistake from
appearing again... Unfortunately the bug wasn't triggered by this test, which
presumably is because the connect to a local server is too fast/different
compared to the real/distant servers we saw the bug happen with.
can be created before resolving the IPv6 name. In the context of running
a test, it doesn't make sense to run an IPv6 test when a host is resolvable
but IPv6 isn't usable. This should fix failures of test 1085 on hosts with
library and DNS support for IPv6 but where actual use of IPv6 has been
administratively disabled.
return code. This way, if the precheck command can't be run at all for
whatever reason, it's treated as a precheck failure which causes the
test to be skipped.
fixed a CURLINFO_REDIRECT_URL memory leak and an additional wrong-doing:
Any subsequent transfer with a redirect leaks memory, eventually crashing
the process potentially.
Any subsequent transfer WITHOUT a redirect causes the most recent redirect
that DID occur on some previous transfer to still be reported.
a fresh connection to be made in such cases and the request retransmitted.
This should fix test case 160. Added test case 1079 in an attempt to
test a similar connection dropping scenario, but as a race condition, it's
hard to test reliably.
gets a 550 response back for the cases where a download (or NOBODY) is
wanted. It still allows a 550 as response if the SIZE is used as part of an
upload process (like if resuming an upload is requested and the file isn't
there before the upload). I also modified the FTP test server and a few test
cases accordingly to match this modified behavior.
date parser function. This makes our function less dependent on system-
provided functions and instead we do all the magic ourselves. We also no
longer depend on the TZ environment variable.
Markus Moeller reported: http://curl.haxx.se/mail/archive-2008-09/0016.html
- recv() errors other than those equal to EAGAIN now cause proper
CURLE_RECV_ERROR to get returned. This made test case 160 fail so I've now
disabled it until we can figure out another way to exercise that logic.
CURLOPT_POST301 (but adds a define for backwards compatibility for you who
don't define CURL_NO_OLDIES). This option allows you to now also change the
libcurl behavior for a HTTP response 302 after a POST to not use GET in the
subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the
patch somewhat before commit. The curl tool got a matching --post302
option. Test case 1076 was added to verify this.
to HTTP 1.0 upon receiving a response from the HTTP server. Tests 1072
and 1073 are similar to test 1069 in that they involve the impossible
scenario of sending chunked data to a HTTP 1.0 server. All these currently
fail and are added to DISABLED.
Added test 1075 to test --anyauth with Basic authentication.
"Connection: close" and actually close the connection after the
response-body, libcurl could still have outstanding data to send and it
would not properly notice this and stop sending. This caused weirdness and
sad faces. http://curl.haxx.se/bug/view.cgi?id=2080222
Note that there are still reasons to consider libcurl's behavior when
getting a >= 400 response code while sending data, as Craig Perras' note
"http upload: how to stop on error" specifies:
http://curl.haxx.se/mail/archive-2008-08/0138.html
which caused an error when the second header was dumped due to stdout
being closed. Added test case 1066 to verify. Also fixed a potential
problem where a closed file descriptor might be used for an upload
when more than one URL is given.
was discovered to be problematic while investigating an incident reported by
Von back in May. curl in this case doesn't include a Content-Length: or
Transfer-Encoding: chunked header which is illegal. This test case is
added to DISABLED until a solution is found.
when a server responded with long headers and data. Luckily, the buffer
overflowed into another unused buffer, so no actual harm was done.
Added test cases 1060 and 1061 to verify.
line of a multiline FTP response whose last byte landed exactly at the end
of the BUFSIZE-length buffer would be treated as the terminal response
line. The following response code read in would then actually be the
end of the previous response line, and all responses from then on would
correspond to the wrong command. Test case 1062 verifies this.
Stop closing a never-opened ftp socket.
NetWare curlbuild.h settings depend on whether LIBC or CLIB is used.
The NetWare specific Makefile is capable of knowing which target is being built.
So, finally, the NetWare Makefile will take care of generating curlbuild.h
CVS checked out curlbuild.h.dist as curlbuild.h for any non-configure target
when host system is not running buildconf.bat.
All the curlbuild.h stuff was done taking in consideration that no adjustment
would be needed in non-configure makefiles.
As it is documented, when trying to build on non-configure capable systems or on
systems which for any reason don't run the true configure script, it is required
to have the proper curlbuild.h in place before calling any makefile.
Due to the hardcore memory debugging stuff c-ares enabled debug builds also need
the file in the proper place before attempting to build c-ares.
proved how PUT and POST with a redirect could lead to a "hang" due to the
data stream not being rewound properly when it had to in order to get sent
properly (again) to the subsequent URL. This is now fixed and these test
cases are no longer disabled.
with -C - sent garbage in the Content-Range: header. I fixed this problem by
making sure libcurl always sets the size of the _entire_ upload if an app
attemps to do resumed uploads since libcurl simply cannot know the size of
what is currently at the server end. Test 1041 is no longer disabled.
incorrectly--the host name is treated as part of the user name and the
port number becomes the password. This can be observed in test 279
(was KNOWN_ISSUE #54).
by Ben Sutcliffe. The test when run manually shows a problem in curl,
but the test harness web server doesn't run the test correctly so it's
disabled for now.
http://sources.redhat.com/automake/automake.html#Extending-aclocal documents
that starting with Automake 1.8, aclocal will warn about all underquoted calls
to AC_DEFUN due to the fact that in a single aclocal run it might include more
than once all .m4 files which it finds available, this includes .m4 files from
other software packages.
If the first argument to AC_DEFUN is underquoted and the same macro is included
more than once, successive inclusions after the first one will expand the macro
instead of assuming it is the same as the first one included.
fix for it. It occured when you did a FTP transfer using
CURLFTPMETHOD_SINGLECWD and then did another one on the same easy handle but
switched to CURLFTPMETHOD_NOCWD. Due to the "dir depth" variable not being
cleared properly. Scott's test case is now known as test 539 and it
verifies the fix.
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487567) pointing out that
libcurl used Content-Range: instead of Range when doing a range request with
--head (CURLOPT_NOBODY). This is now fixed and test case 1032 was added to
verify.
All boolean options (such as -O, -I, -v etc), both short and long versions,
now always switch on/enable the option named. Using the same option multiple
times thus make no difference. To switch off one of those options, you need
to use the long version of the option and type --no-OPTION. Like to disable
verbose mode you use --no-verbose!
- Added --remote-name-all to curl, which if used changes the default for all
given URLs to be dealt with as if -O is used. So if you want to disable that
for a specific URL after --remote-name-all has been used, you muse use -o -
or --no-remote-name.
curl_easy_getinfo. It returns a pointer to a string with the most recently
used IP address. Modified test case 500 to also verify this feature. The
implementing of this feature was sponsored by Lenny Rachitsky at NeuStar.
how the HTTP redirect following code didn't properly follow to a new URL if
the new url was but a query string such as "Location: ?moo=foo". Test case
1031 was added to verify this fix.
when function clock_gettime() is available and the monotonic timer is
also available. Otherwise, in some cases, librt or libposix4 could be used
for linking even when finally not using the clock_gettime() function due
to lack of the monotonic clock.
when using CURL_AUTH_ANY" (http://curl.haxx.se/bug/view.cgi?id=1945240).
The problem was that when libcurl rewound a stream meant for upload when it
would prepare for a second request, it could accidentally continue the
sending of the rewound data on the first request instead of on the second.
Ben also provided test case 1030 that verifies this fix.
redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now
introduce the new CURLINFO_REDIRECT_URL option that lets applications
extract the URL libcurl would've redirected to if it had been told to. This
then enables the application to continue to that URL as it thinks is
suitable, without having to re-implement the magic of creating the new URL
from the Location: header etc. Test 1029 verifies it.
server input and response request files of the test harness sws server.
Reintroduce, for test # 1001, the <postcheck> small delay. The delay is
needed even with the accelerated writing of server input and response
request files in test harness sws server.
http://curl.haxx.se/mail/lib-2008-04/0385.html
