When a username and password are provided in the URL, they were wrongly
removed from the stored URL so that subsequent uses of the same URL
wouldn't find the crendentials. This made doing HTTP auth with multiple
connections (like Digest) mishave.
Regression from 46e164069d (7.62.0)
Test case 335 added to verify.
Reported-by: Mike Crowe
Fixes#4228Closes#4229
RFC 7838 section 5:
When using an alternative service, clients SHOULD include an Alt-Used
header field in all requests.
Removed CURLALTSVC_ALTUSED again (feature is still EXPERIMENTAL thus
this is deemed ok).
You can disable sending this header just like you disable any other HTTP
header in libcurl.
Closes#4199
Even though it cannot fall-back to a lower HTTP version automatically. The
safer way to upgrade remains via CURLOPT_ALTSVC.
CURLOPT_H3 no longer has any bits that do anything and might be removed
before we remove the experimental label.
Updated the curl tool accordingly to use "--http3".
Closes#4197
This is only the libcurl part that provides the information. There's no
user of the parsed value. This change includes three new tests for the
parser.
Ref: #3794
It was used (intended) to pass in the size of the 'socks' array that is
also passed to these functions, but was rarely actually checked/used and
the array is defined to a fixed size of MAX_SOCKSPEREASYHANDLE entries
that should be used instead.
Closes#4169
If using the read callback for HTTP_POST, and POSTFIELDSIZE is not set,
automatically add a Transfer-Encoding: chunked header, same as it is
already done for HTTP_PUT, HTTP_POST_FORM and HTTP_POST_MIME. Update
test 1514 according to the new behaviour.
Closes#4138
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes#3500
With CURLOPT_TIMECONDITION set, a header is automatically added (e.g.
If-Modified-Since). Allow this to be replaced or suppressed with
CURLOPT_HTTPHEADER.
Fixes#4103Closes#4109
There were a leftover few prototypes of Curl_ functions that we used to
export but no longer do, this removes those prototypes and cleans up any
comments still referring to them.
Curl_write32_le(), Curl_strcpy_url(), Curl_strlen_url(), Curl_up_free()
Curl_concat_url(), Curl_detach_connnection(), Curl_http_setup_conn()
were made static in 05b100aee2.
Curl_http_perhapsrewind() made static in 574aecee20.
For the remainder, I didn't trawl the Git logs hard enough to capture
their exact time of deletion, but they were all gone: Curl_splayprint(),
Curl_http2_send_request(), Curl_global_host_cache_dtor(),
Curl_scan_cache_used(), Curl_hostcache_destroy(), Curl_second_connect(),
Curl_http_auth_stage() and Curl_close_connections().
Closes#4096
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
The header buffer size calculation can from static analysis seem to
overlow as it performs an addition between two size_t variables and
stores the result in a size_t variable. Overflow is however guarded
against elsewhere since the input to the addition is regulated by
the maximum read buffer size. Clarify this with a comment since the
question was asked.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
To make sure a HTTP/2 stream registers the end of stream.
Bug #4043 made me find this problem but this fix doesn't correct the
reported issue.
Closes#4068
Responses with status codes 1xx, 204 or 304 don't have a response body. For
these, don't parse these headers:
- Content-Encoding
- Content-Length
- Content-Range
- Last-Modified
- Transfer-Encoding
This change ensures that HTTP/2 upgrades work even if a
"Content-Length: 0" or a "Transfer-Encoding: chunked" header is present.
Co-authored-by: Daniel Stenberg
Closes#3702Fixes#3968Closes#3977
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
* Adjusted unit tests 2056, 2057
* do not generally close connections with CURLAUTH_NEGOTIATE after every request
* moved negotiatedata from UrlState to connectdata
* Added stream rewind logic for CURLAUTH_NEGOTIATE
* introduced negotiatedata::GSS_AUTHDONE and negotiatedata::GSS_AUTHSUCC
* Consider authproblem state for CURLAUTH_NEGOTIATE
* Consider reuse_forbid for CURLAUTH_NEGOTIATE
* moved and adjusted negotiate authentication state handling from
output_auth_headers into Curl_output_negotiate
* Curl_output_negotiate: ensure auth done is always set
* Curl_output_negotiate: Set auth done also if result code is
GSS_S_CONTINUE_NEEDED/SEC_I_CONTINUE_NEEDED as this result code may
also indicate the last challenge request (only works with disabled
Expect: 100-continue and CURLOPT_KEEP_SENDING_ON_ERROR -> 1)
* Consider "Persistent-Auth" header, detect if not present;
Reset/Cleanup negotiate after authentication if no persistent
authentication
* apply changes introduced with #2546 for negotiate rewind logic
Fixes#1261Closes#1975
The check that prevents payload from sending in case of authentication
doesn't check properly if the authentication is done or not.
They're cases where the proxy respond "200 OK" before sending
authentication challenge. This change takes care of that.
Fixes#2431Closes#3669
- no need to have them protocol specific
- no need to set pointers to them with the Curl_setup_transfer() call
- make Curl_setup_transfer() operate on a transfer pointer, not
connection
- switch some counters from long to the more proper curl_off_t type
Closes#3627
Without it set, we would unwillingly triger the "HTTP error before end
of send, stop sending" condition even if the entire POST body had been
sent (since it wouldn't know the expected size) which would
unnecessarily log that message and close the connection when it didn't
have to.
Reported-by: Matt McClure
Bug: https://curl.haxx.se/mail/archive-2019-02/0023.htmlCloses#3624
This allows the compiler to pack and align the structs better in
memory. For a rather feature-complete build on x86_64 Linux, gcc 8.1.2
makes the Curl_easy struct 4.9% smaller. From 6312 bytes to 6000.
Removed an unused struct field.
No functionality changes.
Closes#3610
Previously the function would edit the provided header in-place when a
semicolon is used to signify an empty header. This made it impossible to
use the same set of custom headers in multiple threads simultaneously.
This approach now makes a local copy when it needs to edit the string.
Reported-by: d912e3 on github
Fixes#3578Closes#3579
urlapi: turn three local-only functions into statics
conncache: make conncache_find_first_connection static
multi: make detach_connnection static
connect: make getaddressinfo static
curl_ntlm_core: make hmac_md5 static
http2: make two functions static
http: make http_setup_conn static
connect: make tcpnodelay static
tests: make UNITTEST a thing to mark functions with, so they can be static for
normal builds and non-static for unit test builds
... and mark Curl_shuffle_addr accordingly.
url: make up_free static
setopt: make vsetopt static
curl_endian: make write32_le static
rtsp: make rtsp_connisdead static
warnless: remove unused functions
memdebug: remove one unused function, made another static
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes#2873Closes#3383
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION
options that allow a callback based approach to sending trailing headers
with chunked transfers.
The test server (sws) was updated to take into account the detection of the
end of transfer in the case of trailing headers presence.
Test 1591 checks that trailing headers can be sent using libcurl.
Closes#3350
Only allow secure origins to be able to write cookies with the
'secure' flag set. This reduces the risk of non-secure origins
to influence the state of secure origins. This implements IETF
Internet-Draft draft-ietf-httpbis-cookie-alone-01 which updates
RFC6265.
Closes#2956
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- Include query in the path passed to generate HTTP auth.
Recent changes to use the URL API internally (46e1640, 7.62.0)
inadvertently broke authentication URIs by omitting the query.
Fixes https://github.com/curl/curl/issues/3353Closes#3356
The http status code 204 (No Content) should not change the "condition
unmet" flag. Only the http status code 304 (Not Modified) should do
this.
Closes#359
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
