Daniel Stenberg
1be1d3cfb8
Matt Veenstra updated to 7.12.3. Starting now, we'll update the version number
...
in this file automatically on releases using the maketgz script.
2004-12-08 23:09:23 +00:00
Daniel Stenberg
b970469df9
Matt Veenstra:
...
- removal of getdate.c
- Added hostares.c, hostasyn.c, hostip4.c, hostip6.c, hostsync.c,
hostthre.c, inet_ntop.c, nwlib.c, parsedate.c, sterror.c, strtoofft.c
I have tested the build on 10.3, and will build on 10.2.8 in the next days.
2004-12-08 23:02:55 +00:00
Daniel Stenberg
80a324386b
Rene Bernhardt found and fixed a buffer overrun in the NTLM code, where
...
libcurl always and unconditionally overwrote a stack-based array with 3 zero
bytes. I edited the fix to make it less likely to occur again (and added
a comment explaining the reason to the buffer size).
2004-12-07 23:09:41 +00:00
Daniel Stenberg
c78ee11c41
CURLFTPSSL_ALL should make sure that the transfer fails if the data connection
...
isn't set to encrypted properly
2004-12-07 10:00:20 +00:00
Daniel Stenberg
4435e3b269
Fixed so that the final error message is sent to the verbose info "stream"
...
even if no errorbuffer is set.
2004-12-06 23:04:30 +00:00
Daniel Stenberg
b96a0dba90
Gisle Vanem's fix for better info messages when failing to connect using
...
the multi interface
2004-12-06 22:45:45 +00:00
Gisle Vanem
30dfc00a54
'crypto_engine' not used.
2004-12-06 16:36:50 +00:00
Gisle Vanem
fe5979cfdb
Replace MINGW32 with built-in __MINGW32__.
2004-12-06 14:43:04 +00:00
Daniel Stenberg
ac269a8f68
Dan Fandrich added the --disable-cookies option to configure to build
...
libcurl without cookie support. This is mainly useful if you want to build a
minimalistic libcurl with no cookies support at all. Like for embedded
systems or similar.
2004-12-05 23:59:32 +00:00
Daniel Stenberg
35944744f8
Richard Atterer fixed libcurl's way of dealing with the EPSV
...
response. Previously, libcurl would re-resolve the host name with the new
port number and attempt to connect to that, while it should use the IP from
the control channel. This bug made it hard to EPSV from an FTP server with
multiple IP addresses!
2004-12-05 23:33:33 +00:00
Daniel Stenberg
2c27e4ee76
Bug report #1078066 : when a chunked transfer was pre-maturely closed exactly
...
at a chunk boundary it was not considered an error and thus went unnoticed.
Added test case 207 to verify.
2004-12-03 09:31:25 +00:00
Daniel Stenberg
6ac9e67bd7
made the intended one hour default timeout in the CONNECT loop actually work
2004-12-02 23:30:13 +00:00
Daniel Stenberg
8726a6b6ed
comment cleanup
2004-12-02 22:52:14 +00:00
Daniel Stenberg
15360e5e51
prevent an initial "(nil)" to get sent in the initial request when doing
...
CONNECT to a proxy with digest
2004-12-02 17:08:37 +00:00
Gisle Vanem
bfa74c2649
alarm() works unreliable on djgpp 2.03. Don't use it.
2004-11-30 14:59:24 +00:00
Daniel Stenberg
c28e15c682
Dan Fandrich's fix for libz 1.1 and "extra field" usage in a gzip stream
2004-11-30 09:44:54 +00:00
Daniel Stenberg
0966ddafaa
As reported in Mandrake's bug tracker bug 12285
...
(http://qa.mandrakesoft.com/show_bug.cgi?id=12285 ), when connecting to an
IPv6 host with FTP, --disable-epsv (or --disable-eprt) effectively disables
the ability to transfer a file. Now, when connected to an FTP server with
IPv6, these FTP commands can't be disabled even if asked to with the
available libcurl options.
2004-11-29 21:25:07 +00:00
Daniel Stenberg
5ae34aa8e1
killed trailing whitespace
2004-11-29 12:11:46 +00:00
Daniel Stenberg
c0d448f778
if gmtime() returns NULL, this returns -1 to bail out nicely
2004-11-29 08:10:10 +00:00
Daniel Stenberg
a4752673bb
typecast the coversion from long to int
2004-11-27 09:27:48 +00:00
Gisle Vanem
d85bc18178
I changed my mind. Remove ioctl() macro in setup.h instead.
2004-11-26 16:08:15 +00:00
Gisle Vanem
af114358c8
Renamed urldata.h members 'ioctl*' to 'ioctrl*' due to
...
clash with djgpp ioctl() macro in setup.h.
2004-11-26 14:57:01 +00:00
Daniel Stenberg
ffe17a8197
As reported in Mandrake's bug tracker bug 12289
...
(http://qa.mandrakesoft.com/show_bug.cgi?id=12289 ), curl would print a newline
to "finish" the progress meter after each redirect and not only after a
completed transfer.
2004-11-26 14:33:13 +00:00
Daniel Stenberg
2459e1e268
removed no longer used variable
2004-11-26 08:52:18 +00:00
Daniel Stenberg
bf51f05a50
FTP improvements:
...
If EPSV, EPRT or LPRT is tried and doesn't work, it will not be retried on
the same server again even if a following request is made using a persistent
connection.
If a second request is made to a server, requesting a file from the same
directory as the previous request operated on, libcurl will no longer make
that long series of CWD commands just to end up on the same spot. Note that
this is only for *exactly* the same dir. There is still room for improvements
to optimize the CWD-sending when the dirs are only slightly different.
Added test 210, 211 and 212 to verify these changes. Had to improve the
test script too and added a new primitive to the test file format.
2004-11-25 22:21:49 +00:00
Daniel Stenberg
5d94ff5974
made the code fit within 80 cols
2004-11-25 16:49:14 +00:00
Daniel Stenberg
7b3fba1ad5
added missing new error string
2004-11-24 18:25:33 +00:00
Daniel Stenberg
3e1caa6185
HTTP "auth done right". See lib/README.httpauth
2004-11-24 16:11:35 +00:00
Daniel Stenberg
8e34e75100
Curl_select's timeout arg is an int
2004-11-22 13:28:44 +00:00
Daniel Stenberg
1729918777
Dan Fandrich fix to compile with libc5
2004-11-20 08:57:56 +00:00
Gisle Vanem
cef290c6b4
Enable >2GB files for MingW.
2004-11-19 15:15:52 +00:00
Gisle Vanem
539e34b5df
Suppress signed vs. unsigned warnings on Win32
2004-11-19 14:38:02 +00:00
Daniel Stenberg
765683403f
Curl_select() now uses curl_socket_t on socket arguments
2004-11-19 14:03:19 +00:00
Gisle Vanem
2b403db811
Winsock sockets are not in range 0..FD_SETSIZE.
...
Shouldn't Curl_select() use curl_socket_t ?
2004-11-19 13:46:58 +00:00
Daniel Stenberg
03e7b7c95f
add select.obj
2004-11-19 13:45:46 +00:00
Daniel Stenberg
1a05a90f1c
David Phillips' FD_SETSIZE fix
2004-11-19 08:52:33 +00:00
Daniel Stenberg
dcea109bb5
Dan Fandrich fix: eliminates some pedantic CodeWarrior compiler warnings and
...
errors.
2004-11-18 14:04:40 +00:00
Daniel Stenberg
7d0d19708a
Added README.httpauth to the dist
2004-11-16 14:24:54 +00:00
Daniel Stenberg
09f14efade
saved for the future
2004-11-16 14:02:24 +00:00
Daniel Stenberg
5931d43a36
clean up start time and t_startsingle use so that redirect_time works properly
2004-11-15 11:27:03 +00:00
Gisle Vanem
c3ecd552f5
Borland doesn't have <sys/utime.h> nor utime().
2004-11-14 13:49:09 +00:00
Gisle Vanem
56f0227c92
Static lib is libcurl.lib and import lib libcurl_imp.lib.
...
Added implib command. Cleanup
2004-11-14 13:48:15 +00:00
Daniel Stenberg
dcb5a4df01
Dan fixed the CURL_DISABLE_VERBOSE_STRINGS stuff for older gcc versions since
...
they don't support C99 varargs macros.
2004-11-13 21:57:33 +00:00
Gisle Vanem
61599ceb7b
Renamed import lib to "libcurl_imp.lib".
...
Some cleanup and making it more readable.
2004-11-13 14:17:41 +00:00
Gisle Vanem
98a8103a3b
Netware target (hosted on Linux gcc) doesn't support
...
or need __declspec.
2004-11-12 11:45:05 +00:00
Daniel Stenberg
94043b1150
Dan Fandrich added the --disable-crypto-auth option to configure to allow
...
libcurl to build without Digest support. (I figure it should also explicitly
disable Negotiate and NTLM.)
2004-11-12 09:18:14 +00:00
Daniel Stenberg
8e2f57c82e
Dan Fandrich: make --disable-dict actually disable dict
2004-11-11 23:13:06 +00:00
Daniel Stenberg
59c063dfd3
Fix behaviour when passing NULL to CURLOPT_POSTFIELDS and CURLOPT_HTTPPOST.
2004-11-11 23:11:04 +00:00
Daniel Stenberg
710e370c34
Dan Fandrich added --disable-verbose
2004-11-11 16:34:24 +00:00
Daniel Stenberg
cd73a733c7
dates from 2038 or later now return 0x7fffffff when 32 bit time_t is used
2004-11-11 09:26:09 +00:00
