clarity. This does fix one problem that causes ;type=i FTP URLs
to fail in the Turkish locale when CURLOPT_PROXY_TRANSFER_MODE is
used (test case 561)
Added tests 561 and 1092 through 1094 to test various combinations
of ;type= and ;mode= URLs that could potentially fail in the Turkish
locale.
a fresh connection to be made in such cases and the request retransmitted.
This should fix test case 160. Added test case 1079 in an attempt to
test a similar connection dropping scenario, but as a race condition, it's
hard to test reliably.
CURLOPT_POST301 (but adds a define for backwards compatibility for you who
don't define CURL_NO_OLDIES). This option allows you to now also change the
libcurl behavior for a HTTP response 302 after a POST to not use GET in the
subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the
patch somewhat before commit. The curl tool got a matching --post302
option. Test case 1076 was added to verify this.
to HTTP 1.0 upon receiving a response from the HTTP server. Tests 1072
and 1073 are similar to test 1069 in that they involve the impossible
scenario of sending chunked data to a HTTP 1.0 server. All these currently
fail and are added to DISABLED.
Added test 1075 to test --anyauth with Basic authentication.
which caused an error when the second header was dumped due to stdout
being closed. Added test case 1066 to verify. Also fixed a potential
problem where a closed file descriptor might be used for an upload
when more than one URL is given.
was discovered to be problematic while investigating an incident reported by
Von back in May. curl in this case doesn't include a Content-Length: or
Transfer-Encoding: chunked header which is illegal. This test case is
added to DISABLED until a solution is found.
when a server responded with long headers and data. Luckily, the buffer
overflowed into another unused buffer, so no actual harm was done.
Added test cases 1060 and 1061 to verify.
line of a multiline FTP response whose last byte landed exactly at the end
of the BUFSIZE-length buffer would be treated as the terminal response
line. The following response code read in would then actually be the
end of the previous response line, and all responses from then on would
correspond to the wrong command. Test case 1062 verifies this.
Stop closing a never-opened ftp socket.
by Ben Sutcliffe. The test when run manually shows a problem in curl,
but the test harness web server doesn't run the test correctly so it's
disabled for now.
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487567) pointing out that
libcurl used Content-Range: instead of Range when doing a range request with
--head (CURLOPT_NOBODY). This is now fixed and test case 1032 was added to
verify.
how the HTTP redirect following code didn't properly follow to a new URL if
the new url was but a query string such as "Location: ?moo=foo". Test case
1031 was added to verify this fix.
when using CURL_AUTH_ANY" (http://curl.haxx.se/bug/view.cgi?id=1945240).
The problem was that when libcurl rewound a stream meant for upload when it
would prepare for a second request, it could accidentally continue the
sending of the rewound data on the first request instead of on the second.
Ben also provided test case 1030 that verifies this fix.
redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now
introduce the new CURLINFO_REDIRECT_URL option that lets applications
extract the URL libcurl would've redirected to if it had been told to. This
then enables the application to continue to that URL as it thinks is
suitable, without having to re-implement the magic of creating the new URL
from the Location: header etc. Test 1029 verifies it.
such as the CURLOPT_SSL_CTX_FUNCTION one treat that as if it was a Location:
following. The patch that introduced this feature was done for 7.11.0, but
this code and functionality has been broken since about 7.15.4 (March 2006)
with the introduction of non-blocking OpenSSL "connects".
It was a hack to begin with and since it doesn't work and hasn't worked
correctly for a long time and nobody has even noticed, I consider it a very
suitable subject for plain removal. And so it was done.
(http://curl.haxx.se/bug/view.cgi?id=1850730) I wrote up test case 552. The
test is doing a 70K POST with a read callback and an ioctl callback over a
proxy requiring Digest auth. The test case code is more or less identical to
the test recipe code provided by Spacen Jasset (who submitted the bug report).
This happened because the tftp code always uncondionally did a bind()
without caring if one already had been done and then it failed. I wrote a
test case (1009) to verify this, but it is a bit error-prone since it will
have to pick a fixed local port number and since the tests are run on so
many different hosts in different situations I add it in disabled state.
target called 'filecheck' so that if you run 'make filecheck' in this directory
it'll check if the local files are also mentioned in the Makefile.am so that
they are properly included in release archives!
function do wrong on all input bytes that are >= 0x80 (decimal 128) due to a
signed / unsigned mistake in the code. I fixed it and added test case 543 to
verify.
curl_easy_setopt() that alters how libcurl functions when following
redirects. It makes libcurl obey the RFC2616 when a 301 response is received
after a non-GET request is made. Default libcurl behaviour is to change
method to GET in the subsequent request (like it does for response code 302
- because that's what many/most browsers do), but with this CURLOPT_POST301
option enabled it will do what the spec says and do the next request using
the same method again. I.e keep POST after 301.
The curl tool got this option as --post301
Test case 1011 and 1012 were added to verify.
- Bug report #1792649 (http://curl.haxx.se/bug/view.cgi?id=1792649) pointed
out a problem with doing an empty upload over FTP on a re-used connection.
I added test case 541 to reproduce it and to verify the fix.
- I noticed while writing test 541 that the FTP code wrongly did a CWD on the
second transfer as it didn't store and remember the "" path from the
previous transfer so it would instead CWD to the entry path as stored. This
worked, but did a superfluous command. Thus, test case 541 now also verifies
this fix.
out that libcurl didn't deal with large responses from server commands, when
the single response was consisting of multiple lines but of a total size of
16KB or more. Dan Fandrich improved the ftp test script and provided test
case 1006 to repeat the problem, and I fixed the code to make sure this new
test case runs fine.
out that libcurl didn't deal with very long (>16K) FTP server response lines
properly. Starting now, libcurl will chop them off (thus the client app will
not get the full line) but survive and deal with them fine otherwise. Test
case 1003 was added to verify this.
(http://curl.haxx.se/bug/view.cgi?id=1776235) about ftp requests with NOBODY
on a directory would do a "SIZE (null)" request. This is now fixed and test
case 1000 was added to verify.
after 7.16.2. This is much due to the different treatment file:// gets
internally, but now I added test 231 to make it less likely to happen again
without us noticing!
supports only ftps:// URLs with --ftp-ssl-control specified, which
implicitly encrypts the control channel but not the data channels. That
allows stunnel to be used with an unmodified ftp server in exactly the
same way that the test https server is set up.
Added test case 400 as a basic FTPS test.
something went wrong like it got a bad response code back from the server,
libcurl would leak memory. Added test case 538 to verify the fix.
I also noted that the connection would get cached in that case, which
doesn't make sense since it cannot be re-use when the authentication has
failed. I fixed that issue too at the same time, and also that the path
would be "remembered" in vain for cases where the connection was about to
get closed.
when more than FD_SETSIZE file descriptors are open.
This means that if for any reason we are not able to
open more than FD_SETSIZE file descriptors then test
518 should not be run.
test 537 is all about testing libcurl functionality
when the system has nearly exhausted the number of
free file descriptors. Test 537 will try to run with
very few free file descriptors.
case when 401 or 407 are returned, *IF* no auth credentials have been given.
The CURLOPT_FAILONERROR option is not possible to make fool-proof for 401
and 407 cases when auth credentials is given, but we've now covered this
somewhat more.
You might get some amounts of headers transferred before this situation is
detected, like for when a "100-continue" is received as a response to a
POST/PUT and a 401 or 407 is received immediately afterwards.
Added test 281 to verify this change.
would crash if a bad function sequence was used when shutting down after
using the multi interface (i.e using easy_cleanup after multi_cleanup) so
precautions have been added to make sure it doesn't any more - test case 529
was added to verify.
(http://curl.haxx.se/bug/view.cgi?id=1561470) that is said to crash when an
FTP upload fails with the multi interface. It did not, but I made a failed
upload still assume the control connection to be fine.
(http://curl.haxx.se/bug/view.cgi?id=1338648) which really is more of a
feature request, but anyway. It pointed out that --max-redirs did not allow
it to be set to 0, which then would return an error code on the first
Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS
set to 0, or -1 for infinity. Added test case 274 to verify.
(wrongly) sends *two* WWW-Authenticate headers for Digest. While this should
never happen in a sane world, libcurl previously got into an infinite loop
when this occurred. Dave added test 273 to verify this.
from the command line tool with --ignore-content-length. This will make it
easier to download files from Apache 1.x (and similar) servers that are
still having problems serving files larger than 2 or 4 GB. When this option
is enabled, curl will simply have to wait for the server to close the
connection to signal end of transfer. I wrote test case 269 that runs a
simple test that this works.
fix the CONNECT authentication code with multi-pass auth methods (such as
NTLM) as it didn't previously properly ignore response-bodies - in fact it
stopped reading after all response headers had been received. This could
lead to libcurl sending the next request and reading the body from the first
request as response to the second request. (I also renamed the function,
which wasn't strictly necessary but...)
The best fix would to once and for all make the CONNECT code use the
ordinary request sending/receiving code, treating it as any ordinary request
instead of the special-purpose function we have now. It should make it
better for multi-interface too. And possibly lead to less code...
Added test case 265 for this. It doesn't work as a _really_ good test case
since the test proxy is too stupid, but the test case helps when running the
debugger to verify.
with CURLOPT_PROXY can use a http:// prefix and user + password. The user
and password fields are now also URL decoded properly.
Test case 264 added to verify.
address was not possible to use. It is now, but requires it written
RFC2732-style, within brackets - which incidently is how you enter numerical
IPv6 addresses in URLs. Test case 263 added to verify.
