Compare these settings in Curl_ssl_config_matches():
- verifystatus (CURLOPT_SSL_VERIFYSTATUS)
- random_file (CURLOPT_RANDOM_FILE)
- egdsocket (CURLOPT_EGDSOCKET)
Also copy the setting "verifystatus" in Curl_clone_primary_ssl_config(),
and copy the setting "sessionid" unconditionally.
This means that reusing connections that are secured with a client
certificate is now possible, and the statement "TLS session resumption
is disabled when a client certificate is used" in the old advisory at
https://curl.haxx.se/docs/adv_20170419.html is obsolete.
Reviewed-by: Daniel Stenberg
Closes#1917
So far, all of the SSL backends' private data has been declared as
part of the ssl_connect_data struct, in one big #if .. #elif .. #endif
block.
This can only work as long as the SSL backend is a compile-time option,
something we want to change in the next commits.
Therefore, let's encapsulate the exact data needed by each SSL backend
into a private struct, and let's avoid bleeding any SSL backend-specific
information into urldata.h. This is also necessary to allow multiple SSL
backends to be compiled in at the same time, as e.g. OpenSSL's and
CyaSSL's headers cannot be included in the same .c file.
To avoid too many malloc() calls, we simply append the private structs
to the connectdata struct in allocate_conn().
This requires us to take extra care of alignment issues: struct fields
often need to be aligned on certain boundaries e.g. 32-bit values need to
be stored at addresses that divide evenly by 4 (= 32 bit / 8
bit-per-byte).
We do that by assuming that no SSL backend's private data contains any
fields that need to be aligned on boundaries larger than `long long`
(typically 64-bit) would need. Under this assumption, we simply add a
dummy field of type `long long` to the `struct connectdata` struct. This
field will never be accessed but acts as a placeholder for the four
instances of ssl_backend_data instead. the size of each ssl_backend_data
struct is stored in the SSL backend-specific metadata, to allow
allocate_conn() to know how much extra space to allocate, and how to
initialize the ssl[sockindex]->backend and proxy_ssl[sockindex]->backend
pointers.
This would appear to be a little complicated at first, but is really
necessary to encapsulate the private data of each SSL backend correctly.
And we need to encapsulate thusly if we ever want to allow selecting
CyaSSL and OpenSSL at runtime, as their headers cannot be included within
the same .c file (there are just too many conflicting definitions and
declarations for that).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In 86b889485 (sasl_gssapi: Added GSS-API based Kerberos V5 variables,
2014-12-03), an SSPI-specific field was added to the kerberos5data
struct without moving the #include "curl_sspi.h" later in the same file.
This broke the build when SSPI was enabled, unless Secure Channel was
used as SSL backend, because it just so happens that Secure Channel also
requires "curl_sspi.h" to be #included.
In f4739f639 (urldata: include curl_sspi.h when Windows SSPI is enabled,
2017-02-21), this bug was fixed incorrectly: Instead of moving the
appropriate conditional #include, the Secure Channel-conditional part
was now also SSPI-conditional.
Fix this problem by moving the correct #include instead.
This is also required for an upcoming patch that moves all the Secure
Channel-specific stuff out of urldata.h and encapsulates it properly in
vtls/schannel.c instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Since 5017d5ada (polarssl: now require 1.3.0+, 2014-03-17), we require
a newer PolarSSL version. No need to keep code trying to support any
older version.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The required low-level logic was already available as part of
`libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1]
option.)
This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION`
(boolean) and the new `curl` command-line option `--compressed-ssh`
to request this `libssh2` feature. To have compression enabled, it
is required that the SSH server supports a (zlib) compatible
compression method and that `libssh2` was built with `zlib` support
enabled.
[1] https://www.libssh2.org/libssh2_session_flag.html
Ref: https://github.com/curl/curl/issues/1732
Closes https://github.com/curl/curl/pull/1735
Update the progress timers `t_nslookup`, `t_connect`, `t_appconnect`,
`t_pretransfer`, and `t_starttransfer` to track the total times for
these activities when a redirect is followed. Previously, only the times
for the most recent request would be tracked.
Related changes:
- Rename `Curl_pgrsResetTimesSizes` to `Curl_pgrsResetTransferSizes`
now that the function only resets transfer sizes and no longer
modifies any of the progress timers.
- Add a bool to the `Progress` struct that is used to prevent
double-counting `t_starttransfer` times.
Added test case 1399.
Fixes#522 and Known Bug 1.8
Closes#1602
Reported-by: joshhe on github
... to make all libcurl internals able to use the same data types for
the struct members. The timeval struct differs subtly on several
platforms so it makes it cumbersome to use everywhere.
Ref: #1652Closes#1693
Add a new type of callback to Curl_handler which performs checks on
the connection. Alter RTSP so that it uses this callback to do its
own check on connection health.
If libcurl was built with GSS-API support, it unconditionally advertised
GSS-API authentication while connecting to a SOCKS5 proxy. This caused
problems in environments with improperly configured Kerberos: a stock
libcurl failed to connect, despite libcurl built without GSS-API
connected fine using username and password.
This commit introduces the CURLOPT_SOCKS5_AUTH option to control the
allowed methods for SOCKS5 authentication at run time.
Note that a new option was preferred over reusing CURLOPT_PROXYAUTH
for compatibility reasons because the set of authentication methods
allowed by default was different for HTTP and SOCKS5 proxies.
Bug: https://curl.haxx.se/mail/lib-2017-01/0005.html
Closes https://github.com/curl/curl/pull/1454
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes#1280Closes#1462
... all other non-HTTP protocol schemes are now defaulting to "tunnel
trough" mode if a HTTP proxy is specified. In reality there are no HTTP
proxies out there that allow those other schemes.
Assisted-by: Ray Satiro, Michael Kaufmann
Closes#1505
This gives us accurate precision and it allows us to avoid storing "no
time" for systems with too low timer resolution as we then bump the time
up to 1 microsecond. Should fix test 573 on windows.
Remove the now unused curlx_tvdiff_secs() function.
Maintains the external getinfo() API with using doubles.
Fixes#1531
... since the total amount is low this is faster, easier and reduces
memory overhead.
Also, Curl_expire_done() can now mark an expire timeout as done so that
it never times out.
Closes#1472
The data->req.uploadbuf struct member served no good purpose, instead we
use ->state.uploadbuffer directly. It makes it clearer in the code which
buffer that's being used.
Removed the 'SingleRequest *' argument from the readwrite_upload() proto
as it can be derived from the Curl_easy struct. Also made the code in
the readwrite_upload() function use the 'k->' shortcut to all references
to struct fields in 'data->req', which previously was made with a mix of
both.
- Track when the cached encrypted data contains only a partial record
that can't be decrypted without more data (SEC_E_INCOMPLETE_MESSAGE).
- Change Curl_schannel_data_pending to return false in such a case.
Other SSL libraries have pending data functions that behave similarly.
Ref: https://github.com/curl/curl/pull/1387
Closes https://github.com/curl/curl/pull/1392
The 'list element' struct now has to be within the data that is being
added to the list. Removes 16.6% (tiny) mallocs from a simple HTTP
transfer. (96 => 80)
Also removed return codes since the llist functions can't fail now.
Test 1300 updated accordingly.
Closes#1435
When receiving chunked encoded data with trailers, and the write
callback returns PAUSE, there might be both body and header to store to
resend on unpause. Previously libcurl returned error for that case.
Added test case 1540 to verify.
Reported-by: Stephen Toub
Fixes#1354Closes#1357
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
This flag is meant for the current request based on authentication
state, once the request is done we can clear the flag.
Also change auth.multi to auth.multipass for better readability.
Fixes https://github.com/curl/curl/issues/1095
Closes https://github.com/curl/curl/pull/1326
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Michael Kaufmann
This commit introduces the CURL_SSLVERSION_MAX_* constants as well as
the --tls-max option of the curl tool.
Closes https://github.com/curl/curl/pull/1166
- on the first invocation: keep security context returned by
InitializeSecurityContext()
- on subsequent invocations: use MakeSignature() instead of
InitializeSecurityContext() to generate HTTP digest response
Bug: https://github.com/curl/curl/issues/870
Reported-by: Andreas Roth
Closes https://github.com/curl/curl/pull/1251
Properly resolve, convert and log the proxy host names.
Support the "--connect-to" feature for SOCKS proxies and for passive FTP
data transfers.
Follow-up to cb4e2be
Reported-by: Jay Satiro
Fixes https://github.com/curl/curl/issues/1248
Replace use of fixed macro BUFSIZE to define the size of the receive
buffer. Reappropriate CURLOPT_BUFFERSIZE to include enlarging receive
buffer size. Upon setting, resize buffer if larger than the current
default size up to a MAX_BUFSIZE (512KB). This can benefit protocols
like SFTP.
Closes#1222
In addition to unix domain sockets, Linux also supports an
abstract namespace which is independent of the filesystem.
In order to support it, add new CURLOPT_ABSTRACT_UNIX_SOCKET
option which uses the same storage as CURLOPT_UNIX_SOCKET_PATH
internally, along with a flag to specify abstract socket.
On non-supporting platforms, the abstract address will be
interpreted as an empty string and fail gracefully.
Also add new --abstract-unix-socket tool parameter.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Chungtsun Li (typeless)
Reviewed-by: Daniel Stenberg
Reviewed-by: Peter Wu
Closes#1197Fixes#1061
CURLOPT_SOCKS_PROXY -> CURLOPT_PRE_PROXY
Added the corresponding --preroxy command line option. Sets a SOCKS
proxy to connect to _before_ connecting to a HTTP(S) proxy.
Adds access to the effectively used protocol/scheme to both libcurl and
curl, both in string and numeric (CURLPROTO_*) form.
Note that the string form will be uppercase, as it is just the internal
string.
As these strings are declared internally as const, and all other strings
returned by curl_easy_getinfo() are de-facto const as well, string
handling in getinfo.c got const-ified.
Closes#1137
