The required low-level logic was already available as part of
`libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1]
option.)
This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION`
(boolean) and the new `curl` command-line option `--compressed-ssh`
to request this `libssh2` feature. To have compression enabled, it
is required that the SSH server supports a (zlib) compatible
compression method and that `libssh2` was built with `zlib` support
enabled.
[1] https://www.libssh2.org/libssh2_session_flag.html
Ref: https://github.com/curl/curl/issues/1732
Closes https://github.com/curl/curl/pull/1735
If libcurl was built with GSS-API support, it unconditionally advertised
GSS-API authentication while connecting to a SOCKS5 proxy. This caused
problems in environments with improperly configured Kerberos: a stock
libcurl failed to connect, despite libcurl built without GSS-API
connected fine using username and password.
This commit introduces the CURLOPT_SOCKS5_AUTH option to control the
allowed methods for SOCKS5 authentication at run time.
Note that a new option was preferred over reusing CURLOPT_PROXYAUTH
for compatibility reasons because the set of authentication methods
allowed by default was different for HTTP and SOCKS5 proxies.
Bug: https://curl.haxx.se/mail/lib-2017-01/0005.html
Closes https://github.com/curl/curl/pull/1454
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes#1280Closes#1462
This change introduces new alternatives for the existing six
curl_easy_getinfo() options that return sizes or speeds as doubles. The
new versions are named like the old ones but with an appended '_T':
CURLINFO_CONTENT_LENGTH_DOWNLOAD_T
CURLINFO_CONTENT_LENGTH_UPLOAD_T
CURLINFO_SIZE_DOWNLOAD_T
CURLINFO_SIZE_UPLOAD_T
CURLINFO_SPEED_DOWNLOAD_T
CURLINFO_SPEED_UPLOAD_T
Closes#1511
Some code (e.g. Curl_fillreadbuffer) assumes that this buffer is not
exceedingly tiny and will break if it is. This same check is already
done at run time in the CURLOPT_BUFFERSIZE option.
The module contains a more comprehensive set of trust information than
supported by nss-pem, because libnssckbi.so also includes information
about distrusted certificates.
Reviewed-by: Kai Engert
Closes#1414
For some reason, CMake 2.8.12.2 did not expand the list argument in a
single DEPENDS argument. Remove the quotes, so it gets expanded into
multiple arguments for add_custom_command and add_custom_target.
Fixes https://github.com/curl/curl/issues/1370Closes#1372
Note that for some reason there is this warning (that also exists with
autotools, added since curl-7_15_1-94-ga718cb05f):
docs/libcurl/curl_multi_socket_all.3:1: can't open `man3/curl_multi_socket.3': No such file or directory
Additionally, adjust the roffit --mandir option to support creating
links when doing out-of-tree builds.
Ref: https://github.com/curl/curl/pull/1288
For easier sharing with CMake. The contents were reformatted to use
two-space indent and expanded tabs (matching lib/Makefile.common).
Ref: https://github.com/curl/curl/pull/1288
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
This commit introduces the CURL_SSLVERSION_MAX_* constants as well as
the --tls-max option of the curl tool.
Closes https://github.com/curl/curl/pull/1166
In DarwinSSL the SSLSetPeerDomainName function is used to enable both
sending SNI and verifying the host. When host verification is disabled
the function cannot be called, therefore SNI is disabled as well.
Closes https://github.com/curl/curl/pull/1240
- Change CURLOPT_PROXY_CAPATH to return CURLE_NOT_BUILT_IN if the option
is not supported, which is the same as what we already do for
CURLOPT_CAPATH.
- Change the curl tool to handle CURLOPT_PROXY_CAPATH error
CURLE_NOT_BUILT_IN as a warning instead of as an error, which is the
same as what we already do for CURLOPT_CAPATH.
- Fix CAPATH docs to show that CURLE_NOT_BUILT_IN is returned when the
respective CAPATH option is not supported by the SSL library.
Ref: https://github.com/curl/curl/pull/1257
Replace use of fixed macro BUFSIZE to define the size of the receive
buffer. Reappropriate CURLOPT_BUFFERSIZE to include enlarging receive
buffer size. Upon setting, resize buffer if larger than the current
default size up to a MAX_BUFSIZE (512KB). This can benefit protocols
like SFTP.
Closes#1222
In addition to unix domain sockets, Linux also supports an
abstract namespace which is independent of the filesystem.
In order to support it, add new CURLOPT_ABSTRACT_UNIX_SOCKET
option which uses the same storage as CURLOPT_UNIX_SOCKET_PATH
internally, along with a flag to specify abstract socket.
On non-supporting platforms, the abstract address will be
interpreted as an empty string and fail gracefully.
Also add new --abstract-unix-socket tool parameter.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Chungtsun Li (typeless)
Reviewed-by: Daniel Stenberg
Reviewed-by: Peter Wu
Closes#1197Fixes#1061
Follow-up to 82245ea: Fix the example program sendrecv.c (handle
CURLE_AGAIN, handle incomplete send). Improve the documentation
for curl_easy_recv() and curl_easy_send().
Reviewed-by: Frank Meier
Assisted-by: Jay Satiro
See https://github.com/curl/curl/pull/1134
CURLOPT_SOCKS_PROXY -> CURLOPT_PRE_PROXY
Added the corresponding --preroxy command line option. Sets a SOCKS
proxy to connect to _before_ connecting to a HTTP(S) proxy.
This was added as part of the SOCKS+HTTPS proxy merge but there's no
need to support this as we prefer to have the protocol specified as a
prefix instead.
Adds access to the effectively used protocol/scheme to both libcurl and
curl, both in string and numeric (CURLPROTO_*) form.
Note that the string form will be uppercase, as it is just the internal
string.
As these strings are declared internally as const, and all other strings
returned by curl_easy_getinfo() are de-facto const as well, string
handling in getinfo.c got const-ified.
Closes#1137
* HTTPS proxies:
An HTTPS proxy receives all transactions over an SSL/TLS connection.
Once a secure connection with the proxy is established, the user agent
uses the proxy as usual, including sending CONNECT requests to instruct
the proxy to establish a [usually secure] TCP tunnel with an origin
server. HTTPS proxies protect nearly all aspects of user-proxy
communications as opposed to HTTP proxies that receive all requests
(including CONNECT requests) in vulnerable clear text.
With HTTPS proxies, it is possible to have two concurrent _nested_
SSL/TLS sessions: the "outer" one between the user agent and the proxy
and the "inner" one between the user agent and the origin server
(through the proxy). This change adds supports for such nested sessions
as well.
A secure connection with a proxy requires its own set of the usual SSL
options (their actual descriptions differ and need polishing, see TODO):
--proxy-cacert FILE CA certificate to verify peer against
--proxy-capath DIR CA directory to verify peer against
--proxy-cert CERT[:PASSWD] Client certificate file and password
--proxy-cert-type TYPE Certificate file type (DER/PEM/ENG)
--proxy-ciphers LIST SSL ciphers to use
--proxy-crlfile FILE Get a CRL list in PEM format from the file
--proxy-insecure Allow connections to proxies with bad certs
--proxy-key KEY Private key file name
--proxy-key-type TYPE Private key file type (DER/PEM/ENG)
--proxy-pass PASS Pass phrase for the private key
--proxy-ssl-allow-beast Allow security flaw to improve interop
--proxy-sslv2 Use SSLv2
--proxy-sslv3 Use SSLv3
--proxy-tlsv1 Use TLSv1
--proxy-tlsuser USER TLS username
--proxy-tlspassword STRING TLS password
--proxy-tlsauthtype STRING TLS authentication type (default SRP)
All --proxy-foo options are independent from their --foo counterparts,
except --proxy-crlfile which defaults to --crlfile and --proxy-capath
which defaults to --capath.
Curl now also supports %{proxy_ssl_verify_result} --write-out variable,
similar to the existing %{ssl_verify_result} variable.
Supported backends: OpenSSL, GnuTLS, and NSS.
* A SOCKS proxy + HTTP/HTTPS proxy combination:
If both --socks* and --proxy options are given, Curl first connects to
the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS
proxy.
TODO: Update documentation for the new APIs and --proxy-* options.
Look for "Added in 7.XXX" marks.
Add the new option CURLOPT_KEEP_SENDING_ON_ERROR to control whether
sending the request body shall be completed when the server responds
early with an error status code.
This is suitable for manual NTLM authentication.
Reviewed-by: Jay Satiro
Closes https://github.com/curl/curl/pull/904
.. and add that --proto-redir and CURLOPT_REDIR_PROTOCOLS do not
override protocols denied by --proto and CURLOPT_PROTOCOLS.
- Add a test to enforce: --proto deny must override --proto-redir allow
Closes https://github.com/curl/curl/pull/1031
Speed limits (from CURLOPT_MAX_RECV_SPEED_LARGE &
CURLOPT_MAX_SEND_SPEED_LARGE) were applied simply by comparing limits
with the cumulative average speed of the entire transfer; While this
might work at times with good/constant connections, in other cases it
can result to the limits simply being "ignored" for more than "short
bursts" (as told in man page).
Consider a download that goes on much slower than the limit for some
time (because bandwidth is used elsewhere, server is slow, whatever the
reason), then once things get better, curl would simply ignore the limit
up until the average speed (since the beginning of the transfer) reached
the limit. This could prove the limit useless to effectively avoid
using the entire bandwidth (at least for quite some time).
So instead, we now use a "moving starting point" as reference, and every
time at least as much as the limit as been transferred, we can reset
this starting point to the current position. This gets a good limiting
effect that applies to the "current speed" with instant reactivity (in
case of sudden speed burst).
Closes#971
After a few wasted hours hunting down the reason for slowness during a
TLS handshake that turned out to be because of TCP_NODELAY not being
set, I think we have enough motivation to toggle the default for this
option. We now enable TCP_NODELAY by default and allow applications to
switch it off.
This also makes --tcp-nodelay unnecessary, but --no-tcp-nodelay can be
used to disable it.
Thanks-to: Tim Rühsen
Bug: https://curl.haxx.se/mail/lib-2016-06/0143.html
When CURLOPT_POSTFIELDS is set to an empty string libcurl will send a
zero-byte POST. Prior to this change it was documented as sending data
from the read callback.
This also changes the wording of what happens when empty or NULL so that
it's hopefully easier to understand for people whose primary language
isn't English.
Bug: https://github.com/curl/curl/issues/862
Reported-by: Askar Safin
The connect-to list isn't copied so as long as the handle may be used
for a transfer the list must be valid.
Bug: https://github.com/curl/curl/pull/819
Reported-by: Michael Kaufmann
As these two options provide identical functionality, the former for
SOCK5 proxies and the latter for HTTP proxies, merged the two options
together.
As such CURLOPT_SOCKS5_GSSAPI_SERVICE is marked as deprecated as of
7.49.0.
The two options are almost the same, except in the case of OpenSSL:
CURLINFO_TLS_SESSION OpenSSL session internals is SSL_CTX *.
CURLINFO_TLS_SSL_PTR OpenSSL session internals is SSL *.
For backwards compatibility we couldn't modify CURLINFO_TLS_SESSION to
return an SSL pointer for OpenSSL.
Also, add support for the 'internals' member to point to SSL object for
the other backends axTLS, PolarSSL, Secure Channel, Secure Transport and
wolfSSL.
Bug: https://github.com/curl/curl/issues/234
Reported-by: dkjjr89@users.noreply.github.com
Bug: https://curl.haxx.se/mail/lib-2015-09/0127.html
Reported-by: Michael König
- Add tests.
- Add an example to CURLOPT_TFTP_NO_OPTIONS.3.
- Add --tftp-no-options to expose CURLOPT_TFTP_NO_OPTIONS.
Bug: https://github.com/curl/curl/issues/481
Some TFTP server implementations ignore the "TFTP Option extension"
(RFC 1782-1784, 2347-2349), or implement it in a flawed way, causing
problems with libcurl. Another switch for curl_easy_setopt
"CURLOPT_TFTP_NO_OPTIONS" is introduced which prevents libcurl from
sending TFTP option requests to a server, avoiding many problems caused
by faulty implementations.
Bug: https://github.com/curl/curl/issues/481
The CURLOPT_SSH_PUBLIC_KEYFILE option has been documented to handle
empty strings specially since curl-7_25_0-31-g05a443a but the behavior
was unintentionally removed in curl-7_38_0-47-gfa7d04f.
This commit restores the original behavior and clarifies it in the
documentation that NULL and "" have both the same meaning when passed
to CURLOPT_SSH_PUBLIC_KEYFILE.
Bug: http://curl.haxx.se/mail/lib-2016-01/0072.html
... even for those that don't support providing anything in the
'internals' struct member since it offers a convenient way for
applications to figure this out.
If the port number in the proxy string ended weirdly or the number is
too large, skip it. Mostly as a means to bail out early if a "bare" IPv6
numerical address is used without enclosing brackets.
Also mention the bracket requirement for IPv6 numerical addresses to the
man page for CURLOPT_PROXY.
Closes#415
Reported-by: Marcel Raad
- Warn that cookies without a domain are sent to any domain:
CURLOPT_COOKIELIST, CURLOPT_COOKIEFILE, --cookie
- Note that imported Set-Cookie cookies without a domain are no longer
exported:
CURLINFO_COOKIELIST, CURLOPT_COOKIEJAR, --cookie-jar
- Add new option CURLOPT_DEFAULT_PROTOCOL to allow specifying a default
protocol for schemeless URLs.
- Add new tool option --proto-default to expose
CURLOPT_DEFAULT_PROTOCOL.
In the case of schemeless URLs libcurl will behave in this way:
When the option is used libcurl will use the supplied default.
When the option is not used, libcurl will follow its usual plan of
guessing from the hostname and falling back to 'http'.
- Clarify that FILE and SCP are disabled by default since 7.19.4
- Add that SMB and SMBS are disabled by default since 7.40.0
- Add CURLPROTO_SMBS to the list of protocols
New tool option --ssl-no-revoke.
New value CURLSSLOPT_NO_REVOKE for CURLOPT_SSL_OPTIONS.
Currently this option applies only to WinSSL where we have automatic
certificate revocation checking by default. According to the
ssl-compared chart there are other backends that have automatic checking
(NSS, wolfSSL and DarwinSSL) so we could possibly accommodate them at
some later point.
Bug: https://github.com/bagder/curl/issues/264
Reported-by: zenden2k <zenden2k@gmail.com>
Prior to this change any-domain cookies (cookies without a domain that
are sent to any domain) were exported with domain name "unknown".
Bug: https://github.com/bagder/curl/issues/292
Document that if Set-Cookie is used without a domain then the cookie is
sent for any domain and will not be modified.
Bug: http://curl.haxx.se/mail/lib-2015-05/0137.html
Reported-by: Alexander Dyagilev
The CURLOPT_COOKIE doc says it "sets the cookie header explicitly in the
outgoing request(s)." However there seems to be some user confusion
about cookie modification. Document that the cookies set by this option
are not modified by the cookie engine.
Bug: http://curl.haxx.se/mail/lib-2015-05/0115.html
Reported-by: Alexander Dyagilev
Make the HTTP headers separated by default for improved security and
reduced risk for information leakage.
Bug: http://curl.haxx.se/docs/adv_20150429.html
Reported-by: Yehezkel Horowitz, Oren Souroujon
Icecast versions 1.3.0 through 1.3.12 would reply with "ICY 200"
under certain conditions:
client_wants_icy_headers (connection_t *con)
{
const char *val;
if (!con)
return 1;
val = get_user_agent (con);
if (!val || !val[0] || strcmp (val, "(null)") == 0)
return 1;
if (con->food.client->use_icy)
return 1;
if (strncasecmp (val, "winamp", 6) == 0)
return 1;
if (strncasecmp (val, "Shoutcast", 9) == 0)
return 1;
return 0;
}
So mainly if there is no 'user agent' or it is '(null)' or contains
'winamp' or 'Shoutcast'.
No mainstream distribution carries Icecast 1.3.x anymore, after all
it was released in 2002 and superseded by Icecast 2.x.
