Fixed two return code mixups. CURLE_UNKNOWN_OPTION is saved for when the
option is, yeah, not known. Clarified this in the setopt man page too.
Closes#5993
const struct curl_easyoption *curl_easy_option_by_name(const char *name);
const struct curl_easyoption *curl_easy_option_by_id (CURLoption id);
const struct curl_easyoption *
curl_easy_option_next(const struct curl_easyoption *prev);
The purpose is to provide detailed enough information to allow for
example libcurl bindings to get option information at run-time about
what easy options that exist and what arguments they expect.
Assisted-by: Jeroen Ooms
Closes#5365
The buffer only exists during transfer and then we shouldn't change the
size (the setopt is not documented to work then).
Reported-by: Harry Sintonen
Closes#5842
Unsetting CURLOPT_NOBODY with 0L when doing HTTP has no documented
action but before 7.71.0 that used to switch back to GET and with this
change (assuming the method is still set to HEAD) this behavior is
brought back.
Reported-by: causal-agent on github
Fixes#5725Closes#5728
When the method is updated inside libcurl we must still not change the
method as set by the user as then repeated transfers with that same
handle might not execute the same operation anymore!
This fixes the libcurl part of #5462
Test 1633 added to verify.
Closes#5499
... and free it as soon as the transfer is done. It removes the extra
alloc when a new size is set with setopt() and reduces memory for unused
easy handles.
In addition: the closure_handle now doesn't use an allocated buffer at
all but the smallest supported size as a stack based one.
Closes#5472
This change introduces a generic way to provide binary data in setopt
options, called BLOBs.
This change introduces these new setopts:
CURLOPT_ISSUERCERT_BLOB, CURLOPT_PROXY_SSLCERT_BLOB,
CURLOPT_PROXY_SSLKEY_BLOB, CURLOPT_SSLCERT_BLOB and CURLOPT_SSLKEY_BLOB.
Reviewed-by: Daniel Stenberg
Closes#5357
- Implement new option CURLSSLOPT_REVOKE_BEST_EFFORT and
--ssl-revoke-best-effort to allow a "best effort" revocation check.
A best effort revocation check ignores errors that the revocation check
was unable to take place. The reasoning is described in detail below and
discussed further in the PR.
---
When running e.g. with Fiddler, the schannel backend fails with an
unhelpful error message:
Unknown error (0x80092012) - The revocation function was unable
to check revocation for the certificate.
Sadly, many enterprise users who are stuck behind MITM proxies suffer
the very same problem.
This has been discussed in plenty of issues:
https://github.com/curl/curl/issues/3727,
https://github.com/curl/curl/issues/264, for example.
In the latter, a Microsoft Edge developer even made the case that the
common behavior is to ignore issues when a certificate has no recorded
distribution point for revocation lists, or when the server is offline.
This is also known as "best effort" strategy and addresses the Fiddler
issue.
Unfortunately, this strategy was not chosen as the default for schannel
(and is therefore a backend-specific behavior: OpenSSL seems to happily
ignore the offline servers and missing distribution points).
To maintain backward-compatibility, we therefore add a new flag
(`CURLSSLOPT_REVOKE_BEST_EFFORT`) and a new option
(`--ssl-revoke-best-effort`) to select the new behavior.
Due to the many related issues Git for Windows and GitHub Desktop, the
plan is to make this behavior the default in these software packages.
The test 2070 was added to verify this behavior, adapted from 310.
Based-on-work-by: georgeok <giorgos.n.oikonomou@gmail.com>
Co-authored-by: Markus Olsson <j.markus.olsson@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes https://github.com/curl/curl/pull/4981
With c-ares the dns parameters lives in ares_channel. Store them in the
curl handle and set them again in easy_duphandle.
Regression introduced in #3228 (6765e6d), shipped in curl 7.63.0.
Fixes#4893Closes#5020
Signed-off-by: Ernst Sjöstrand <ernst.sjostrand@verisure.com>
Add support for CURLSSLOPT_NO_PARTIALCHAIN in CURLOPT_PROXY_SSL_OPTIONS
and OS400 package spec.
Also I added the option to the NameValue list in the tool even though it
isn't exposed as a command-line option (...yet?). (NameValue stringizes
the option name for the curl cmd -> libcurl source generator)
Follow-up to 564d88a which added CURLSSLOPT_NO_PARTIALCHAIN.
Ref: https://github.com/curl/curl/pull/4655
- Stop treating lack of HTTP2 as an unknown option error result for
CURLOPT_SSL_ENABLE_ALPN and CURLOPT_SSL_ENABLE_NPN.
Prior to this change it was impossible to disable ALPN / NPN if libcurl
was built without HTTP2. Setting either option would result in
CURLE_UNKNOWN_OPTION and the respective internal option would not be
set. That was incorrect since ALPN and NPN are used independent of
HTTP2.
Reported-by: Shailesh Kapse
Fixes https://github.com/curl/curl/issues/4668
Closes https://github.com/curl/curl/pull/4672
For a long time (since 7.28.1) we've returned error when setting the
value to 1 to make applications notice that we stopped supported the old
behavior for 1. Starting now, we treat 1 and 2 exactly the same.
Closes#4241
Even though it cannot fall-back to a lower HTTP version automatically. The
safer way to upgrade remains via CURLOPT_ALTSVC.
CURLOPT_H3 no longer has any bits that do anything and might be removed
before we remove the experimental label.
Updated the curl tool accordingly to use "--http3".
Closes#4197
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixes#3653Closes#3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes#3500
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72ca9499ff8c1cc36c2a8d520edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a13.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2f.
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixed#3653Closes#3790
This limits all accepted input strings passed to libcurl to be less than
CURL_MAX_INPUT_LENGTH (8000000) bytes, for these API calls:
curl_easy_setopt() and curl_url_set().
The 8000000 number is arbitrary picked and is meant to detect mistakes
or abuse, not to limit actual practical use cases. By limiting the
acceptable string lengths we also reduce the risk of integer overflows
all over.
NOTE: This does not apply to `CURLOPT_POSTFIELDS`.
Test 1559 verifies.
Closes#3805
Commit 9081014 fixed most of the confusing issues between scope id and
scope however 844896d added bad limits checking assuming that the scope
is being set and not the scope id.
I have fixed the documentation so it all refers to scope ids.
In addition Curl_if2ip refered to the scope id as remote_scope_id which
is incorrect, so I renamed it to local_scope_id.
Adjusted-by: Daniel Stenberg
Closes#3655Closes#3765Fixes#3713
Remove the code too. The functionality has been disabled in code since
7.62.0. Setting this option will from now on simply be ignored and have
no function.
Closes#3654
This allows the compiler to pack and align the structs better in
memory. For a rather feature-complete build on x86_64 Linux, gcc 8.1.2
makes the Curl_easy struct 4.9% smaller. From 6312 bytes to 6000.
Removed an unused struct field.
No functionality changes.
Closes#3610
urlapi: turn three local-only functions into statics
conncache: make conncache_find_first_connection static
multi: make detach_connnection static
connect: make getaddressinfo static
curl_ntlm_core: make hmac_md5 static
http2: make two functions static
http: make http_setup_conn static
connect: make tcpnodelay static
tests: make UNITTEST a thing to mark functions with, so they can be static for
normal builds and non-static for unit test builds
... and mark Curl_shuffle_addr accordingly.
url: make up_free static
setopt: make vsetopt static
curl_endian: make write32_le static
rtsp: make rtsp_connisdead static
warnless: remove unused functions
memdebug: remove one unused function, made another static
CURLOPT_SSH_KNOWNHOSTS and CURLOPT_SSH_KEYFUNCTION are supported for
libssh as well. So accepting these options only when compiling with
libssh2 is wrong here.
Fixes#3493Closes#3494
We use "conn" everywhere to be a pointer to the connection.
Introduces two functions that "attaches" and "detaches" the connection
to and from the transfer.
Going forward, we should favour using "data->conn" (since a transfer
always only has a single connection or none at all) to "conn->data"
(since a connection can have none, one or many transfers associated with
it and updating conn->data to be correct is error prone and a frequent
reason for internal issues).
Closes#3442
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes#2873Closes#3383
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION
options that allow a callback based approach to sending trailing headers
with chunked transfers.
The test server (sws) was updated to take into account the detection of the
end of transfer in the case of trailing headers presence.
Test 1591 checks that trailing headers can be sent using libcurl.
Closes#3350
