... since the total amount is low this is faster, easier and reduces
memory overhead.
Also, Curl_expire_done() can now mark an expire timeout as done so that
it never times out.
Closes#1472
A) reduces the timeout lists drastically
B) prevents a lot of superfluous loops for timers that expires "in vain"
when it has actually already been extended to fire later on
When the random seed is purposely made predictable for testing purposes
by using the CURL_ENTROPY environment variable, process that data in an
endian agnostic way so the the initial random seed is the same
regardless of endianness.
- Change Curl_rand to write to a char array instead of int array.
- Add Curl_rand_hex to write random hex characters to a buffer.
Fixes#1315Closes#1468
Co-authored-by: Daniel Stenberg
Reported-by: Michael Kaufmann
SEND_QUAL_ARG2 had to be set, but was never used. Use it in swrite to
avoid warnings about casting away low-level const.
Closes https://github.com/curl/curl/pull/1464
Fix the following warnings when building the tests by using the correct
types:
cast from 'const char *' to 'void *' drops const qualifier
[-Wcast-qual]
implicit conversion changes signedness [-Wsign-conversion]
Previous TODO wanting to write in chunks. We should support writing more
at once since some TELNET servers may respond immediately upon first
byte written such as WHOIS servers.
Closes#1389
Prior to this change it was possible for libcurl to be built with both
Windows' native IDN lib (normaliz) and libidn2 enabled. It appears that
doesn't offer any benefit --and could cause a bug-- since libcurl's IDN
handling is written to use either one but not both.
Bug: https://github.com/curl/curl/issues/1441#issuecomment-297689856
Reported-by: Gisle Vanem
This fixes the following clang warnings:
http2.c:184:27: error: no previous extern declaration for non-static
variable 'Curl_handler_http2' [-Werror,-Wmissing-variable-declarations]
http2.c:204:27: error: no previous extern declaration for non-static
variable 'Curl_handler_http2_ssl'
[-Werror,-Wmissing-variable-declarations]
clang complains:
curl_rtmp.c:61:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmp' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:81:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmpt' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:101:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmpe' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:121:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmpte' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:141:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmps' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:161:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmpts' [-Werror,-Wmissing-variable-declarations]
Fix this by including the header file.
This fixes the following clang warnings:
macro is not used [-Wunused-macros]
will never be executed [-Wunreachable-code]
Closes https://github.com/curl/curl/pull/1448
get_protocol_family() is not defined static even though there is a
static local forward declaration. Let's simply make the definition match
it's declaration.
Bug: https://curl.haxx.se/mail/lib-2017-04/0127.html
The module contains a more comprehensive set of trust information than
supported by nss-pem, because libnssckbi.so also includes information
about distrusted certificates.
Reviewed-by: Kai Engert
Closes#1414
The data->req.uploadbuf struct member served no good purpose, instead we
use ->state.uploadbuffer directly. It makes it clearer in the code which
buffer that's being used.
Removed the 'SingleRequest *' argument from the readwrite_upload() proto
as it can be derived from the Curl_easy struct. Also made the code in
the readwrite_upload() function use the 'k->' shortcut to all references
to struct fields in 'data->req', which previously was made with a mix of
both.
- Track when the cached encrypted data contains only a partial record
that can't be decrypted without more data (SEC_E_INCOMPLETE_MESSAGE).
- Change Curl_schannel_data_pending to return false in such a case.
Other SSL libraries have pending data functions that behave similarly.
Ref: https://github.com/curl/curl/pull/1387
Closes https://github.com/curl/curl/pull/1392
`if(nfds || extra_nfds) {` is followed by `malloc(nfds * ...)`.
If `extra_fs` could be non-zero when `nfds` was zero, then we have
`malloc(0)` which is allowed to return `NULL`. But, malloc returning
NULL can be confusing. In this code, the next line would treat the NULL
as an allocation failure.
It turns out, if `nfds` is zero then `extra_nfds` must also be zero.
The final value of `nfds` includes `extra_nfds`. So the test for
`extra_nfds` is redundant. It can only confuse the reader.
Closes#1439
With -Og, GCC complains:
easy.c:628:7: error: ‘mcode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
../lib/strcase.h:35:29: error: ‘tok_buf’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
vauth/digest.c:208:9: note: ‘tok_buf’ was declared here
../lib/strcase.h:35:29: error: ‘tok_buf’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
vauth/digest.c:566:15: note: ‘tok_buf’ was declared here
Fix this by initializing the variables.
The 'list element' struct now has to be within the data that is being
added to the list. Removes 16.6% (tiny) mallocs from a simple HTTP
transfer. (96 => 80)
Also removed return codes since the llist functions can't fail now.
Test 1300 updated accordingly.
Closes#1435
In that case, use libcurl's internal MD4 routine. This fixes tests 1013
and 1014 which were failing due to configure assuming NTLM and SMB were
always available whenever mbed TLS was in use (which is now true).
This fixes 3 warnings issued by MinGW:
1. PR_ImportTCPSocket actually has a paramter of type PROsfd instead of
PRInt32, which is 64 bits on Windows. Fixed this by including the
corresponding header file instead of redeclaring the function, which is
supported even though it is in the private include folder. [1]
2. In 64-bit mode, size_t is 64 bits while CK_ULONG is 32 bits, so an explicit
narrowing cast is needed.
3. Curl_timeleft returns time_t instead of long since commit
21aa32d30d.
[1] https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSPR/Reference/PR_ImportTCPSocket
Closes https://github.com/curl/curl/pull/1393
ERR_error_string with NULL parameter is not thread-safe. The library
writes the string into some static buffer. Two threads doing this at
once may clobber each other and run into problems. Switch to
ERR_error_string_n which avoids this problem and is explicitly
bounds-checked.
Also clean up some remnants of OpenSSL 0.9.5 around here. A number of
comments (fixed buffer size, explaining that ERR_error_string_n was
added in a particular version) date to when ossl_strerror tried to
support pre-ERR_error_string_n OpenSSLs.
Closes#1424
ssl_session_init was only introduced in version 1.3.8, the penultimate
version. The function only contains a memset, so replace it with that.
Suggested-by: Jay Satiro
Fixes https://github.com/curl/curl/issues/1401
The POSIX standard location is <poll.h>. Using <sys/poll.h> results in
warning spam when using the musl standard library.
Closes https://github.com/curl/curl/pull/1406
... because they may include an intermediate certificate for a client
certificate and the intermediate certificate needs to be presented to
the server, no matter if we verify the peer or not.
Reported-by: thraidh
Closes#851
When UNICODE is not defined, the Curl_convert_UTF8_to_tchar macro maps
directly to its argument. As it is declared as a pointer to const and
InitializeSecurityContext expects a pointer to non-const, both MSVC and MinGW
issue a warning about implicitly casting away the const. Fix this by declaring
the variables as pointers to non-const.
Closes https://github.com/curl/curl/pull/1394
Previously, periods of fast speed between periods of slow speed would
not count and could still erroneously trigger a timeout.
Reported-by: Paul Harris
Fixes#1345Closes#1390
Multi handles repeatedly invert the queue of pending easy handles when
used with CURLMOPT_MAX_TOTAL_CONNECTIONS. This is caused by a multistep
process involving Curl_splaygetbest and violates the FIFO property of
the multi handle.
This patch fixes this issue by redefining the "best" node in the
context of timeouts as the "smallest not larger than now", and
implementing the necessary data structure modifications to do this
effectively, namely:
- splay nodes with the same key are now stored in a doubly-linked
circular list instead of a non-circular one to enable O(1)
insertion to the tail of the list
- Curl_splayinsert inserts nodes with the same key to the tail of
the same list
- in case of multiple nodes with the same key, the one on the head of
the list gets selected
- Don't free postponed data on a connection that will be reused since
doing so can cause data loss when pipelining.
Only Windows builds are affected by this.
Closes https://github.com/curl/curl/issues/1380
Safe to silence warning adding time delta of poll, which can trigger on
Windows since sizeof time_t > sizeof long.
warning C4244: '+=' : conversion from 'time_t' to 'long', possible loss
of data
system.h is aimed to replace curlbuild.h at a later point in time when
we feel confident system.h works sufficiently well.
curl/system.h is currently used in parallel with curl/curlbuild.h
curl/system.h determines a data sizes, data types and include file
status based on available preprocessor defines instead of getting
generated at build-time. This, in order to avoid relying on a build-time
generated file that makes it complicated to do 32 and 64 bit bields from
the same installed set of headers.
Test 1541 verifies that system.h comes to the same conclusion that
curlbuild.h offers.
Closes#1373
telnet.c(1427,21): warning: comparison of constant 268435456 with
expression of type 'CURLcode' is always false
telnet.c(1433,21): warning: comparison of constant 268435457 with
expression of type 'CURLcode' is always false
Reviewed-by: Jay Satiro
Reported-by: Gisle Vanem
Bug: https://github.com/curl/curl/issues/1225#issuecomment-290340890Closes#1374
'left' is used as time_t but declared as long.
MinGW complains:
error: conversion to 'long int' from 'time_t {aka long long int}' may alter
its value [-Werror=conversion]
Changed the declaration to time_t.
At least under Windows, there is no SIZEOF_LONG, so it evaluates to 0 even
though sizeof(int) == sizeof(long). This should probably have been
CURL_SIZEOF_LONG, but the type of timeout_ms changed from long to time_t
anyway.
This triggered MSVC warning C4668 about implicitly replacing undefined
macros with '0'.
Closes https://github.com/curl/curl/pull/1362
If we use FTPS over CONNECT, the TLS handshake for the FTPS control
connection needs to be initiated in the SENDPROTOCONNECT state, not
the WAITPROXYCONNECT state. Otherwise, if the TLS handshake completed
without blocking, the information about the completed TLS handshake
would be saved to a wrong flag. Consequently, the TLS handshake would
be initiated in the SENDPROTOCONNECT state once again on the same
connection, resulting in a failure of the TLS handshake. I was able to
observe the failure with the NSS backend if curl ran through valgrind.
Note that this commit partially reverts curl-7_21_6-52-ge34131d.
When receiving chunked encoded data with trailers, and the write
callback returns PAUSE, there might be both body and header to store to
resend on unpause. Previously libcurl returned error for that case.
Added test case 1540 to verify.
Reported-by: Stephen Toub
Fixes#1354Closes#1357
When using basic-auth, connections and proxy connections
can be re-used with different Authorization headers since
it does not authenticate the connection (like NTLM does).
For instance, the below command should re-use the proxy
connection, but it currently doesn't:
curl -v -U alice:a -x http://localhost:8181http://localhost/
--next -U bob:b -x http://localhost:8181http://localhost/
This is a regression since refactoring of ConnectionExists()
as part of: cb4e2be7c6
Fix the above by removing the username and password compare
when re-using proxy connection at proxy_info_matches().
However, this fix brings back another bug would make curl
to re-print the old proxy-authorization header of previous
proxy basic-auth connection because it wasn't cleared.
For instance, in the below command the second request should
fail if the proxy requires authentication, but would succeed
after the above fix (and before aforementioned commit):
curl -v -U alice:a -x http://localhost:8181http://localhost/
--next -x http://localhost:8181http://localhost/
Fix this by clearing conn->allocptr.proxyuserpwd after use
unconditionally, same as we do for conn->allocptr.userpwd.
Also fix test 540 to not expect digest auth header to be
resent when connection is reused.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Closes https://github.com/curl/curl/pull/1350
- If SSL_get_error is called but no extended error detail is available
then show that SSL_ERROR_* as a string.
Prior to this change there was some inconsistency in that case: the
SSL_ERROR_* code may or may not have been shown, or may have been shown
as unknown even if it was known.
Ref: https://github.com/curl/curl/issues/1300
Closes https://github.com/curl/curl/pull/1348
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
A client MUST ignore any Content-Length or Transfer-Encoding header
fields received in a successful response to CONNECT.
"Successful" described as: 2xx (Successful). RFC 7231 4.3.6
Prior to this change such a case would cause an error.
In some ways this bug appears to be a regression since c50b878. Prior to
that libcurl may have appeared to function correctly in such cases by
acting on those headers instead of causing an error. But that behavior
was also incorrect.
Bug: https://github.com/curl/curl/issues/1317
Reported-by: mkzero@users.noreply.github.com
This flag is meant for the current request based on authentication
state, once the request is done we can clear the flag.
Also change auth.multi to auth.multipass for better readability.
Fixes https://github.com/curl/curl/issues/1095
Closes https://github.com/curl/curl/pull/1326
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Michael Kaufmann
This commit introduces the CURL_SSLVERSION_MAX_* constants as well as
the --tls-max option of the curl tool.
Closes https://github.com/curl/curl/pull/1166
This fixes assertion error which occurs when redirect is done with 0
length body via HTTP/2, and the easy handle is reused, but new
connection is established due to hostname change:
curl: http2.c:1572: ssize_t http2_recv(struct connectdata *,
int, char *, size_t, CURLcode *):
Assertion `httpc->drain_total >= data->state.drain' failed.
To fix this bug, ensure that http2_handle_stream is called.
Fixes#1286Closes#1302
... because it causes confusion with users. Example URLs:
"http://[127.0.0.1]:11211:80" which a lot of languages' URL parsers will
parse and claim uses port number 80, while libcurl would use port number
11211.
"http://user@example.com:80@localhost" which by the WHATWG URL spec will
be treated to contain user name 'user@example.com' but according to
RFC3986 is user name 'user' for the host 'example.com' and then port 80
is followed by "@localhost"
Both these formats are now rejected, and verified so in test 1260.
Reported-by: Orange Tsai
Mark intended fallthroughs with /* FALLTHROUGH */ so that gcc will know
it's expected and won't warn on [-Wimplicit-fallthrough=].
Closes https://github.com/curl/curl/pull/1297
In DarwinSSL the SSLSetPeerDomainName function is used to enable both
sending SNI and verifying the host. When host verification is disabled
the function cannot be called, therefore SNI is disabled as well.
Closes https://github.com/curl/curl/pull/1240
If size_t is 32 bits, MSVC warns:
warning C4310: cast truncates constant value
The warning is harmless as CURL_MASK_SCOFFT gets
truncated to the maximum value of size_t.
If the compile-time CURL_CA_BUNDLE location is defined use it as the
default value for the proxy CA bundle location, which is the same as
what we already do for the regular CA bundle location.
Ref: https://github.com/curl/curl/pull/1257
- Change CURLOPT_PROXY_CAPATH to return CURLE_NOT_BUILT_IN if the option
is not supported, which is the same as what we already do for
CURLOPT_CAPATH.
- Change the curl tool to handle CURLOPT_PROXY_CAPATH error
CURLE_NOT_BUILT_IN as a warning instead of as an error, which is the
same as what we already do for CURLOPT_CAPATH.
- Fix CAPATH docs to show that CURLE_NOT_BUILT_IN is returned when the
respective CAPATH option is not supported by the SSL library.
Ref: https://github.com/curl/curl/pull/1257
The CURLOPT_SSL_VERIFYSTATUS option was not properly handled by libcurl
and thus even if the status couldn't be verified, the connection would
be allowed and the user would not be told about the failed verification.
Regression since cb4e2be7c6
CVE-2017-2629
Bug: https://curl.haxx.se/docs/adv_20170222.html
Reported-by: Marcus Hoffmann
- on the first invocation: keep security context returned by
InitializeSecurityContext()
- on subsequent invocations: use MakeSignature() instead of
InitializeSecurityContext() to generate HTTP digest response
Bug: https://github.com/curl/curl/issues/870
Reported-by: Andreas Roth
Closes https://github.com/curl/curl/pull/1251
Properly resolve, convert and log the proxy host names.
Support the "--connect-to" feature for SOCKS proxies and for passive FTP
data transfers.
Follow-up to cb4e2be
Reported-by: Jay Satiro
Fixes https://github.com/curl/curl/issues/1248
- While negotiating auth during PUT/POST if a user-specified
Content-Length header is set send 'Content-Length: 0'.
This is what we do already in HTTPREQ_POST_FORM and what we did in the
HTTPREQ_POST case (regression since afd288b).
Prior to this change no Content-Length header would be sent in such a
case.
Bug: https://curl.haxx.se/mail/lib-2017-02/0006.html
Reported-by: Dominik Hölzl
Closes https://github.com/curl/curl/pull/1242
Builds with axTLS 2.1.2. This then also breaks compatibility with axTLS
< 2.1.0 (the older API)
... and fix the session_id mixup brought in 04b4ee549Fixes#1220
If the NSS code was in the middle of a non-blocking handshake and it
was asked to finish the handshake in blocking mode, it unexpectedly
continued in the non-blocking mode, which caused a FTPS connection
over CONNECT to fail with "(81) Socket not ready for send/recv".
Bug: https://bugzilla.redhat.com/1420327
When removing an easy handler from a multi before it completed its
transfer, and it had pushed streams, it would segfault due to the pushed
counted not being cleared.
Fixed-by: zelinchen@users.noreply.github.comFixes#1249
Using sftp to delete a file with CURLOPT_NOBODY set with a reused
connection would fail as curl expected to get some data. Thus it would
retry the command again which fails as the file has already been
deleted.
Fixes#1243
The information extracted from the server certificates in step 3 is only
used when in verbose mode, and there is no error handling or validation
performed as that has already been done. Only run the certificate
information extraction when in verbose mode and libcurl was built with
verbose strings.
Closes https://github.com/curl/curl/pull/1246
- Remove the SNI disabled when host verification disabled message
since that is incorrect.
- Show a message for legacy versions of Windows <= XP that connections
may fail since those versions of WinSSL lack SNI, algorithms, etc.
Bug: https://github.com/curl/curl/pull/1240
SSL_CTX_add_extra_chain_cert takes ownership of the given certificate
while, despite the similar name, SSL_CTX_add_client_CA does not. Thus
it's best to call SSL_CTX_add_client_CA before
SSL_CTX_add_extra_chain_cert, while the code still has ownership of the
argument.
Closes https://github.com/curl/curl/pull/1236
This repairs cookies for localhost.
Non-PSL builds will now only accept "localhost" without dots, while PSL
builds okeys everything not listed as PSL.
Added test 1258 to verify.
This was a regression brought in a76825a5ef
Replace use of fixed macro BUFSIZE to define the size of the receive
buffer. Reappropriate CURLOPT_BUFFERSIZE to include enlarging receive
buffer size. Upon setting, resize buffer if larger than the current
default size up to a MAX_BUFSIZE (512KB). This can benefit protocols
like SFTP.
Closes#1222
Regression since 1d4202ad, which moved the buffer into a more narrow
scope, but the data in that buffer was used outside of that more narrow
scope.
Reported-by: Dan Fandrich
Bug: https://curl.haxx.se/mail/lib-2017-01/0093.html
curl_addrinfo.c:519:20: error: conversion to ‘curl_socklen_t {aka
unsigned int}’ from ‘long unsigned int’ may alter its value
[-Werror=conversion]
Follow-up to 1d786faee1
In addition to unix domain sockets, Linux also supports an
abstract namespace which is independent of the filesystem.
In order to support it, add new CURLOPT_ABSTRACT_UNIX_SOCKET
option which uses the same storage as CURLOPT_UNIX_SOCKET_PATH
internally, along with a flag to specify abstract socket.
On non-supporting platforms, the abstract address will be
interpreted as an empty string and fail gracefully.
Also add new --abstract-unix-socket tool parameter.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Chungtsun Li (typeless)
Reviewed-by: Daniel Stenberg
Reviewed-by: Peter Wu
Closes#1197Fixes#1061
It made the german ß get converted to ss, IDNA2003 style, and we can't
have that for the .de TLD - a primary reason for our switch to IDNA2008.
Test 165 verifies.
Under condition using http_proxy env var, noproxy list was the
combination of --noproxy option and NO_PROXY env var previously. Since
this commit, --noproxy option overrides NO_PROXY environment variable
even if use http_proxy env var.
Closes#1140
If defined CURL_DISABLE_HTTP, detect_proxy() returned NULL. If not
defined CURL_DISABLE_HTTP, detect_proxy() checked noproxy list.
Thus refactor to set proxy to NULL instead of calling detect_proxy() if
define CURL_DISABLE_HTTP, and refactor to call detect_proxy() if not
define CURL_DISABLE_HTTP and the host is not in the noproxy list.
The combination of --noproxy option and http_proxy env var works well
both for proxied hosts and non-proxied hosts.
However, when combining NO_PROXY env var with --proxy option,
non-proxied hosts are not reachable while proxied host is OK.
This patch allows us to access non-proxied hosts even if using NO_PROXY
env var with --proxy option.
Check for presence of gnutls_alpn_* and gnutls_ocsp_* functions during
configure instead of relying on the version number. GnuTLS has options
to turn these features off and we ca just work with with such builds
like we work with older versions.
Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
Closes#1204
Follow-up to 3463408.
Prior to 3463408 file:// hostnames were silently stripped.
Prior to this commit it did not work when a schemeless url was used with
file as the default protocol.
Ref: https://curl.haxx.se/mail/lib-2016-11/0081.html
Closes https://github.com/curl/curl/pull/1124
Also fix for drive letters:
- Support --proto-default file c:/foo/bar.txt
- Support file://c:/foo/bar.txt
- Fail when a file:// drive letter is detected and not MSDOS/Windows.
Bug: https://github.com/curl/curl/issues/1187
Reported-by: Anatol Belski
Assisted-by: Anatol Belski
Both IMAP and POP3 response characters are used internally, but when
appended to the STARTTLS denial message likely could confuse the user.
Closes https://github.com/curl/curl/pull/1203
Fixed an old leftover use of the USE_SSLEAY define which would make a
socket get removed from the applications sockets to monitor when the
multi_socket API was used, leading to timeouts.
Bug: #1174
Visual C++ complained:
warning C4267: '=': conversion from 'size_t' to 'long', possible loss of data
warning C4701: potentially uninitialized local variable 'path' used
Fixes a few issues in manual wildcard cert name validation in
schannel support code for Win32 CE:
- when comparing the wildcard name to the hostname, the wildcard
character was removed from the cert name and the hostname
was checked to see if it ended with the modified cert name.
This allowed cert names like *.com to match the connection
hostname. This violates recommendations from RFC 6125.
- when the wildcard name in the certificate is longer than the
connection hostname, a buffer overread of the connection
hostname buffer would occur during the comparison of the
certificate name and the connection hostname.
It doesn't benefit us much as the connection could get closed at
any time, and also by checking we lose the ability to determine
if the socket was closed by reading zero bytes.
Reported-by: Michael Kaufmann
Closes https://github.com/curl/curl/pull/1134
CURLOPT_SOCKS_PROXY -> CURLOPT_PRE_PROXY
Added the corresponding --preroxy command line option. Sets a SOCKS
proxy to connect to _before_ connecting to a HTTP(S) proxy.
This was added as part of the SOCKS+HTTPS proxy merge but there's no
need to support this as we prefer to have the protocol specified as a
prefix instead.
ERR_PACK is an internal detail of OpenSSL. Also, when using it, a
function name must be specified which is overly specific: the test will
break whenever OpenSSL internally change things so that a different
function creates the error.
Closes#1157
Since it now reads responses one byte a time, a loop could be removed
and it is no longer limited to get the whole response within 16K, it is
now instead only limited to 16K maximum header line lengths.
... so that it doesn't read data that is actually coming from the
remote. 2xx responses have no body from the proxy, that data is from the
peer.
Fixes#1132
A server MUST NOT send any Transfer-Encoding or Content-Length header
fields in a 2xx (Successful) response to CONNECT. (RFC 7231 section
4.3.6)
Also fixes the three test cases that did this.
If a port number in a "connect-to" entry does not match, skip this
entry instead of connecting to port 0.
If a port number in a "connect-to" entry matches, use this entry
and look no further.
Reported-by: Jay Satiro
Assisted-by: Jay Satiro, Daniel Stenberg
Closes#1148
Adds access to the effectively used protocol/scheme to both libcurl and
curl, both in string and numeric (CURLPROTO_*) form.
Note that the string form will be uppercase, as it is just the internal
string.
As these strings are declared internally as const, and all other strings
returned by curl_easy_getinfo() are de-facto const as well, string
handling in getinfo.c got const-ified.
Closes#1137
vtls/gtls.c: In function ‘Curl_gtls_data_pending’:
vtls/gtls.c:1429:3: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
if(conn->proxy_ssl[connindex].session &&
^~
vtls/gtls.c:1433:5: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
return res;
* HTTPS proxies:
An HTTPS proxy receives all transactions over an SSL/TLS connection.
Once a secure connection with the proxy is established, the user agent
uses the proxy as usual, including sending CONNECT requests to instruct
the proxy to establish a [usually secure] TCP tunnel with an origin
server. HTTPS proxies protect nearly all aspects of user-proxy
communications as opposed to HTTP proxies that receive all requests
(including CONNECT requests) in vulnerable clear text.
With HTTPS proxies, it is possible to have two concurrent _nested_
SSL/TLS sessions: the "outer" one between the user agent and the proxy
and the "inner" one between the user agent and the origin server
(through the proxy). This change adds supports for such nested sessions
as well.
A secure connection with a proxy requires its own set of the usual SSL
options (their actual descriptions differ and need polishing, see TODO):
--proxy-cacert FILE CA certificate to verify peer against
--proxy-capath DIR CA directory to verify peer against
--proxy-cert CERT[:PASSWD] Client certificate file and password
--proxy-cert-type TYPE Certificate file type (DER/PEM/ENG)
--proxy-ciphers LIST SSL ciphers to use
--proxy-crlfile FILE Get a CRL list in PEM format from the file
--proxy-insecure Allow connections to proxies with bad certs
--proxy-key KEY Private key file name
--proxy-key-type TYPE Private key file type (DER/PEM/ENG)
--proxy-pass PASS Pass phrase for the private key
--proxy-ssl-allow-beast Allow security flaw to improve interop
--proxy-sslv2 Use SSLv2
--proxy-sslv3 Use SSLv3
--proxy-tlsv1 Use TLSv1
--proxy-tlsuser USER TLS username
--proxy-tlspassword STRING TLS password
--proxy-tlsauthtype STRING TLS authentication type (default SRP)
All --proxy-foo options are independent from their --foo counterparts,
except --proxy-crlfile which defaults to --crlfile and --proxy-capath
which defaults to --capath.
Curl now also supports %{proxy_ssl_verify_result} --write-out variable,
similar to the existing %{ssl_verify_result} variable.
Supported backends: OpenSSL, GnuTLS, and NSS.
* A SOCKS proxy + HTTP/HTTPS proxy combination:
If both --socks* and --proxy options are given, Curl first connects to
the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS
proxy.
TODO: Update documentation for the new APIs and --proxy-* options.
Look for "Added in 7.XXX" marks.
- Fix connection reuse for when the proposed new conn 'needle' has a
specified local port but does not have a specified device interface.
Bug: https://curl.haxx.se/mail/lib-2016-11/0137.html
Reported-by: bjt3[at]hotmail.com
Visual C++ now complains about implicitly casting time_t (64-bit) to
long (32-bit). Fix this by changing some variables from long to time_t,
or explicitly casting to long where the public interface would be
affected.
Closes#1131
- In Curl_http2_switched don't call memcpy when src is NULL.
Curl_http2_switched can be called like:
Curl_http2_switched(conn, NULL, 0);
.. and prior to this change memcpy was then called like:
memcpy(dest, NULL, 0)
.. causing address sanitizer to warn:
http2.c:2057:3: runtime error: null pointer passed as argument 2, which
is declared to never be null
Now Curl_rand() is made to fail if it cannot get the necessary random
level.
Changed the proto of Curl_rand() slightly to provide a number of ints at
once.
Moved out from vtls, since it isn't a TLS function and vtls provides
Curl_ssl_random() for this to use.
Discussion: https://curl.haxx.se/mail/lib-2016-11/0119.html
Previously, the [host] part was just ignored which made libcurl accept
strange URLs misleading users. like "file://etc/passwd" which might've
looked like it refers to "/etc/passwd" but is just "/passwd" since the
"etc" is an ignored host name.
Reported-by: Mike Crowe
Assisted-by: Kamil Dudka
- Fix GnuTLS code for CURL_SSLVERSION_TLSv1_2 that broke when the
TLS 1.3 support was added in 6ad3add.
- Homogenize across code for all backends the error message when TLS 1.3
is not available to "<backend>: TLS 1.3 is not yet supported".
- Return an error when a user-specified ssl version is unrecognized.
---
Prior to this change our code for some of the backends used the
'default' label in the switch statement (ie ver unrecognized) for
ssl.version and treated it the same as CURL_SSLVERSION_DEFAULT.
Bug: https://curl.haxx.se/mail/lib-2016-11/0048.html
Reported-by: Kamil Dudka
We're mostly saying just "curl" in lower case these days so here's a big
cleanup to adapt to this reality. A few instances are left as the
project could still formally be considered called cURL.
- Call Curl_initinfo on init and duphandle.
Prior to this change the statistical and informational variables were
simply zeroed by calloc on easy init and duphandle. While zero is the
correct default value for almost all info variables, there is one where
it isn't (filetime initializes to -1).
Bug: https://github.com/curl/curl/issues/1103
Reported-by: Neal Poole
...to use the public function curl_strnequal(). This isn't ideal because
it adds extra overhead to any internal calls to checkprefix.
follow-up to 95bd2b3e
As they are after all part of the public API. Saves space and reduces
complexity. Remove the strcase defines from the curlx_ family.
Suggested-by: Dan Fandrich
Idea: https://curl.haxx.se/mail/lib-2016-10/0136.html
This should fix the "warning: 'curl_strequal' redeclared without
dllimport attribute: previous dllimport ignored" message and subsequent
link error on Windows because of the missing CURL_EXTERN on the
prototype.
These two public functions have been mentioned as deprecated since a
very long time but since they are still part of the API and ABI we need
to keep them around.
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
If the requested size is zero, bail out with error instead of doing a
realloc() that would cause a double-free: realloc(0) acts as a free()
and then there's a second free in the cleanup path.
CVE-2016-8619
Bug: https://curl.haxx.se/docs/adv_20161102E.html
Reported-by: Cure53
Previously it only held references to them, which was reckless as the
thread lock was released so the cookies could get modified by other
handles that share the same cookie jar over the share interface.
CVE-2016-8623
Bug: https://curl.haxx.se/docs/adv_20161102I.html
Reported-by: Cure53
- Change initial message box to mention delay when downloading/parsing.
Since there is no progress meter it was somewhat unexpected that after
choosing a filename nothing appears to happen, when actually the cert
data is in the process of being downloaded and parsed.
- Warn if OpenSSL is not present.
- Use a UTF-8 stream to make the ca-bundle data.
- Save the UTF-8 ca-bundle stream as binary so that no BOM is added.
---
This is a follow-up to d2c6d15 which switched mk-ca-bundle.vbs output to
ANSI due to corrupt UTF-8 output, now fixed.
This change completes making the default certificate bundle output of
mk-ca-bundle.vbs as close as possible to that of mk-ca-bundle.pl, which
should make it easier to review any difference between their output.
Ref: https://github.com/curl/curl/pull/1012
Bring the VBScript version more in line with the perl version:
- Change timestamp to UTC.
- Change URL retrieval to HTTPS-only by default.
- Comment out the options that disabled SSL cert checking by default.
- Assume OpenSSL is present, get SHA256. And add a flag to toggle it.
- Fix cert issuer name output.
The cert issuer output is now ansi, converted from UTF-8. Prior to this
it was corrupt UTF-8. It turns out though we can work with UTF-8 the
FSO object that writes ca-bundle can't write UTF-8, so there will have
to be some alternative if UTF-8 is needed (like an ADODB.Stream).
- Disable the certificate text info feature.
The certificate text info doesn't work properly with any recent OpenSSL.
- Change all predefined Mozilla URLs to HTTPS (Gregory Szorc).
- New option -k to allow URLs other than HTTPS and enable HTTP fallback.
Prior to this change the default URL retrieval mode was to fall back to
HTTP if HTTPS didn't work.
Reported-by: Gregory Szorc
Closes#1012
Several independent reports on infinite loops hanging in the
close_all_connections() function when closing a multi handle, can be
fixed by first marking the connection to get closed before calling
Curl_disconnect.
This is more fixing-the-symptom rather than the underlying problem
though.
Bug: https://curl.haxx.se/mail/lib-2016-10/0011.html
Bug: https://curl.haxx.se/mail/lib-2016-10/0059.html
Reported-by: Dan Fandrich, Valentin David, Miloš Ljumović
In short the easy handle needs to be disconnected from its connection at
this point since the connection still is serving other easy handles.
In our app we can reliably reproduce a crash in our http2 stress test
that is fixed by this change. I can't easily reproduce the same test in
a small example.
This is the gdb/asan output:
==11785==ERROR: AddressSanitizer: heap-use-after-free on address 0xe9f4fb80 at pc 0x09f41f19 bp 0xf27be688 sp 0xf27be67c
READ of size 4 at 0xe9f4fb80 thread T13 (RESOURCE_HTTP)
#0 0x9f41f18 in curl_multi_remove_handle /path/to/source/3rdparty/curl/lib/multi.c:666
0xe9f4fb80 is located 0 bytes inside of 1128-byte region [0xe9f4fb80,0xe9f4ffe8)
freed by thread T13 (RESOURCE_HTTP) here:
#0 0xf7b1b5c2 in __interceptor_free /opt/toolchain/src/gcc-6.2.0/libsanitizer/asan/asan_malloc_linux.cc:45
#1 0x9f7862d in conn_free /path/to/source/3rdparty/curl/lib/url.c:2808
#2 0x9f78c6a in Curl_disconnect /path/to/source/3rdparty/curl/lib/url.c:2876
#3 0x9f41b09 in multi_done /path/to/source/3rdparty/curl/lib/multi.c:615
#4 0x9f48017 in multi_runsingle /path/to/source/3rdparty/curl/lib/multi.c:1896
#5 0x9f490f1 in curl_multi_perform /path/to/source/3rdparty/curl/lib/multi.c:2123
#6 0x9c4443c in perform /path/to/source/src/net/resourcemanager/ResourceManagerCurlThread.cpp:854
#7 0x9c445e0 in ...
#8 0x9c4cf1d in ...
#9 0xa2be6b5 in ...
#10 0xf7aa5780 in asan_thread_start /opt/toolchain/src/gcc-6.2.0/libsanitizer/asan/asan_interceptors.cc:226
#11 0xf4d3a16d in __clone (/lib/i386-linux-gnu/libc.so.6+0xe716d)
previously allocated by thread T13 (RESOURCE_HTTP) here:
#0 0xf7b1ba27 in __interceptor_calloc /opt/toolchain/src/gcc-6.2.0/libsanitizer/asan/asan_malloc_linux.cc:70
#1 0x9f7dfa6 in allocate_conn /path/to/source/3rdparty/curl/lib/url.c:3904
#2 0x9f88ca0 in create_conn /path/to/source/3rdparty/curl/lib/url.c:5797
#3 0x9f8c928 in Curl_connect /path/to/source/3rdparty/curl/lib/url.c:6438
#4 0x9f45a8c in multi_runsingle /path/to/source/3rdparty/curl/lib/multi.c:1411
#5 0x9f490f1 in curl_multi_perform /path/to/source/3rdparty/curl/lib/multi.c:2123
#6 0x9c4443c in perform /path/to/source/src/net/resourcemanager/ResourceManagerCurlThread.cpp:854
#7 0x9c445e0 in ...
#8 0x9c4cf1d in ...
#9 0xa2be6b5 in ...
#10 0xf7aa5780 in asan_thread_start /opt/toolchain/src/gcc-6.2.0/libsanitizer/asan/asan_interceptors.cc:226
#11 0xf4d3a16d in __clone (/lib/i386-linux-gnu/libc.so.6+0xe716d)
SUMMARY: AddressSanitizer: heap-use-after-free /path/to/source/3rdparty/curl/lib/multi.c:666 in curl_multi_remove_handle
Shadow bytes around the buggy address:
0x3d3e9f20: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x3d3e9f30: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x3d3e9f40: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x3d3e9f50: fd fd fd fd fd fd fd fd fd fd fd fd fd fa fa fa
0x3d3e9f60: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
=>0x3d3e9f70:[fd]fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x3d3e9f80: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x3d3e9f90: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x3d3e9fa0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x3d3e9fb0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x3d3e9fc0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Heap right redzone: fb
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack partial redzone: f4
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==11785==ABORTING
Thread 14 "RESOURCE_HTTP" received signal SIGABRT, Aborted.
[Switching to Thread 0xf27bfb40 (LWP 12324)]
0xf7fd8be9 in __kernel_vsyscall ()
(gdb) bt
#0 0xf7fd8be9 in __kernel_vsyscall ()
#1 0xf4c7ee89 in __GI_raise (sig=6) at ../sysdeps/unix/sysv/linux/raise.c:54
#2 0xf4c803e7 in __GI_abort () at abort.c:89
#3 0xf7b2ef2e in __sanitizer::Abort () at /opt/toolchain/src/gcc-6.2.0/libsanitizer/sanitizer_common/sanitizer_posix_libcdep.cc:122
#4 0xf7b262fa in __sanitizer::Die () at /opt/toolchain/src/gcc-6.2.0/libsanitizer/sanitizer_common/sanitizer_common.cc:145
#5 0xf7b21ab3 in __asan::ScopedInErrorReport::~ScopedInErrorReport (this=0xf27be171, __in_chrg=<optimized out>) at /opt/toolchain/src/gcc-6.2.0/libsanitizer/asan/asan_report.cc:689
#6 0xf7b214a5 in __asan::ReportGenericError (pc=166993689, bp=4068206216, sp=4068206204, addr=3925146496, is_write=false, access_size=4, exp=0, fatal=true) at /opt/toolchain/src/gcc-6.2.0/libsanitizer/asan/asan_report.cc:1074
#7 0xf7b21fce in __asan::__asan_report_load4 (addr=3925146496) at /opt/toolchain/src/gcc-6.2.0/libsanitizer/asan/asan_rtl.cc:129
#8 0x09f41f19 in curl_multi_remove_handle (multi=0xf3406080, data=0xde582400) at /path/to/source3rdparty/curl/lib/multi.c:666
#9 0x09f6b277 in Curl_close (data=0xde582400) at /path/to/source3rdparty/curl/lib/url.c:415
#10 0x09f3354e in curl_easy_cleanup (data=0xde582400) at /path/to/source3rdparty/curl/lib/easy.c:860
#11 0x09c6de3f in ...
#12 0x09c378c5 in ...
#13 0x09c48133 in ...
#14 0x09c4d092 in ...
#15 0x0a2be6b6 in ...
#16 0xf7aa5781 in asan_thread_start (arg=0xf2d22938) at /opt/toolchain/src/gcc-6.2.0/libsanitizer/asan/asan_interceptors.cc:226
#17 0xf5de52b5 in start_thread (arg=0xf27bfb40) at pthread_create.c:333
#18 0xf4d3a16e in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:114
Fixes#1083
The closure handle only ever has default timeouts set. To improve the
state somewhat we clone the timeouts from each added handle so that the
closure handle always has the same timeouts as the most recently added
easy handle.
Fixes#739
Curl_select_ready() was the former API that was replaced with
Curl_select_check() a while back and the former arg setup was provided
with a define (in order to leave existing code unmodified).
Now we instead offer SOCKET_READABLE and SOCKET_WRITABLE for the most
common shortcuts where only one socket is checked. They're also more
visibly macros.
- Change back behavior so that pipelining is considered possible for
connections that have not yet reached the protocol level.
This is a follow-up to e5f0b1a which had changed the behavior of
checking if pipelining is possible to ignore connections that had
'bits.close' set. Connections that have not yet reached the protocol
level also have that bit set, and we need to consider pipelining
possible on those connections.
This fixes a merge error in commit 7f3df80 caused by commit 332e8d6.
Additionally, this changes Curl_verify_windows_version for Windows App
builds to assume to always be running on the target Windows version.
There seems to be no way to determine the Windows version from a
UWP app. Neither GetVersion(Ex), nor VerifyVersionInfo, nor the
Version Helper functions are supported.
Bug: https://github.com/curl/curl/pull/820#issuecomment-250889878
Reported-by: Paul Joyce
Closes https://github.com/curl/curl/pull/1048
No longer attempt to use "doomed" to-be-closed connections when
pipelining. Prior to this change connections marked for deletion (e.g.
timeout) would be erroneously used, resulting in sporadic crashes.
As originally reported and fixed by Carlo Wood (origin unknown).
Bug: https://github.com/curl/curl/issues/627
Reported-by: Rider Linden
Closes https://github.com/curl/curl/pull/1075
Participation-by: nopjmp@users.noreply.github.com
Not all reply messages were properly checked for their lengths, which
made it possible to access uninitialized memory (but this does not lead
to out of boundary accesses).
Closes#1052
... it no longer takes printf() arguments since it was only really taken
advantage by one user and it was not written and used in a safe
way. Thus the 'f' is removed from the function name and the proto is
changed.
Although the current code wouldn't end up in badness, it was a risk that
future changes could end up springf()ing too large data or passing in a
format string inadvertently.
The previous use of snprintf() could make libcurl silently truncate some
input data and not report that back on overly large input, which could
make data get sent over the network in a bad format.
Example:
$ curl --form 'a=b' -H "Content-Type: $(perl -e 'print "A"x4100')"
Cokie with the same domain but different tailmatching property are now
considered different and do not replace each other. If header contains
following lines then two cookies will be set: Set-Cookie: foo=bar;
domain=.foo.com; expires=Thu Mar 3 GMT 8:56:27 2033 Set-Cookie: foo=baz;
domain=foo.com; expires=Thu Mar 3 GMT 8:56:27 2033
This matches Chrome, Opera, Safari, and Firefox behavior. When sending
stored tokens to foo.com Chrome, Opera, Firefox store send them in the
stored order, while Safari pre-sort the cookies.
Closes#1050
Add the new option CURLOPT_KEEP_SENDING_ON_ERROR to control whether
sending the request body shall be completed when the server responds
early with an error status code.
This is suitable for manual NTLM authentication.
Reviewed-by: Jay Satiro
Closes https://github.com/curl/curl/pull/904
As it seems to be a rarely used cipher suite (for securely established
but _unencrypted_ connections), I believe it is fine not to provide an
alias for the misspelled variant.
LibreSSL defines `OPENSSL_VERSION_NUMBER` as `0x20000000L` for all
versions returning `LibreSSL/2.0.0` for any LibreSSL version.
This change provides a local OpenSSL_version_num function replacement
returning LIBRESSL_VERSION_NUMBER instead.
Closes#1029
The OpenSSL function CRYTPO_cleanup_all_ex_data() cannot be called
multiple times without crashing - and other libs might call it! We
basically cannot call it without risking a crash. The function is a
no-op since OpenSSL 1.1.0.
Not calling this function only risks a small memory leak with OpenSSL <
1.1.0.
Bug: https://curl.haxx.se/mail/lib-2016-09/0045.html
Reported-by: Todd Short
OpenSSL 1.0.1 and 1.0.2 build an error queue that is stored per-thread
so we need to clean it when easy handles are freed, in case the thread
will be killed in which the easy handle was used. All OpenSSL code in
libcurl should extract the error in association with the error already
so clearing this queue here should be harmless at worst.
Fixes#964
NTLM support with mbedTLS was added in 497e7c9 but requires that mbedTLS
is built with the MD4 functions available, which it isn't in default
builds. This now adapts if the funtion isn't there and builds libcurl
without NTLM support if so.
Fixes#1004
... like when a HTTP/0.9 response comes back without any headers at all
and just a body this now prevents that body from being sent to the
callback etc.
Adapted test 1144 to verify.
Fixes#973
Assisted-by: Ray Satiro
Detect support for compiler symbol visibility flags and apply those
according to CURL_HIDDEN_SYMBOLS option.
It should work true to the autotools build except it tries to unhide
symbols on Windows when requested and prints warning if it fails.
Ref: https://github.com/curl/curl/issues/981#issuecomment-242665951
Reported-by: Daniel Stenberg
... by partially reverting f975f06033. The allocation could be made by
OpenSSL so the free must be made with OPENSSL_free() to avoid problems.
Reported-by: Harold Stuart
Fixes#1005
... by making sure we don't count down the "upload left" counter when the
uploaded size is unknown and then it can be allowed to continue forever.
Fixes#996
Since we're using CURLE_FTP_WEIRD_SERVER_REPLY in imap, pop3 and smtp as
more of a generic "failed to parse" introduce an alias without FTP in
the name.
Closes https://github.com/curl/curl/pull/975
This hash is used to verify the original downloaded certificate bundle
and also included in the generated bundle's comment header. Also
rename related internal symbols to algorithm-agnostic names.
CURLINFO_SSL_VERIFYRESULT does not get the certificate verification
result when SSL_connect fails because of a certificate verification
error.
This fix saves the result of SSL_get_verify_result so that it is
returned by CURLINFO_SSL_VERIFYRESULT.
Closes https://github.com/curl/curl/pull/995
While noErr and errSecSuccess are defined as the same value, the API
documentation states that SecPKCS12Import() returns errSecSuccess if
there were no errors in importing. Ensure that a future change of the
defined value doesn't break (however unlikely) and be consistent with
the API docs.
Speed limits (from CURLOPT_MAX_RECV_SPEED_LARGE &
CURLOPT_MAX_SEND_SPEED_LARGE) were applied simply by comparing limits
with the cumulative average speed of the entire transfer; While this
might work at times with good/constant connections, in other cases it
can result to the limits simply being "ignored" for more than "short
bursts" (as told in man page).
Consider a download that goes on much slower than the limit for some
time (because bandwidth is used elsewhere, server is slow, whatever the
reason), then once things get better, curl would simply ignore the limit
up until the average speed (since the beginning of the transfer) reached
the limit. This could prove the limit useless to effectively avoid
using the entire bandwidth (at least for quite some time).
So instead, we now use a "moving starting point" as reference, and every
time at least as much as the limit as been transferred, we can reset
this starting point to the current position. This gets a good limiting
effect that applies to the "current speed" with instant reactivity (in
case of sudden speed burst).
Closes#971
* Added description to Curl_sspi_free_identity()
* Added parameter and return explanations to Curl_sspi_global_init()
* Added parameter explaination to Curl_sspi_global_cleanup()
With HTTP/2 each transfer is made in an indivial logical stream over the
connection, making most previous errors that caused the connection to get
forced-closed now instead just kill the stream and not the connection.
Fixes#941
... instead of if() before the switch(), add a default to the switch so
that the compilers don't warn on "warning: enumeration value
'PLATFORM_DONT_CARE' not handled in switch" anymore.
- Disable ALPN on Wine.
- Don't pass input secbuffer when ALPN is disabled.
When ALPN support was added a change was made to pass an input secbuffer
to initialize the context. When ALPN is enabled the buffer contains the
ALPN information, and when it's disabled the buffer is empty. In either
case this input buffer caused problems with Wine and connections would
not complete.
Bug: https://github.com/curl/curl/issues/983
Reported-by: Christian Fillion
Serialise the call to PK11_FindSlotByName() to avoid spurious errors in
a multi-threaded environment. The underlying cause is a race condition
in nssSlot_IsTokenPresent().
Bug: https://bugzilla.mozilla.org/1297397Closes#985
When we're uploading using FTP and the server issues a tiny pause
between opening the connection to the client's secondary socket, the
client's initial poll() times out, which leads to second poll() which
does not wait for POLLIN on the secondary socket. So that poll() also
has to time out, creating a long (200ms) pause.
This patch adds the correct flag to the secondary socket, making the
second poll() correctly wait for the connection there too.
Signed-off-by: Ales Novak <alnovak@suse.cz>
Closes#978
