The module contains a more comprehensive set of trust information than
supported by nss-pem, because libnssckbi.so also includes information
about distrusted certificates.
Reviewed-by: Kai Engert
Closes#1414
The data->req.uploadbuf struct member served no good purpose, instead we
use ->state.uploadbuffer directly. It makes it clearer in the code which
buffer that's being used.
Removed the 'SingleRequest *' argument from the readwrite_upload() proto
as it can be derived from the Curl_easy struct. Also made the code in
the readwrite_upload() function use the 'k->' shortcut to all references
to struct fields in 'data->req', which previously was made with a mix of
both.
- Track when the cached encrypted data contains only a partial record
that can't be decrypted without more data (SEC_E_INCOMPLETE_MESSAGE).
- Change Curl_schannel_data_pending to return false in such a case.
Other SSL libraries have pending data functions that behave similarly.
Ref: https://github.com/curl/curl/pull/1387
Closes https://github.com/curl/curl/pull/1392
`if(nfds || extra_nfds) {` is followed by `malloc(nfds * ...)`.
If `extra_fs` could be non-zero when `nfds` was zero, then we have
`malloc(0)` which is allowed to return `NULL`. But, malloc returning
NULL can be confusing. In this code, the next line would treat the NULL
as an allocation failure.
It turns out, if `nfds` is zero then `extra_nfds` must also be zero.
The final value of `nfds` includes `extra_nfds`. So the test for
`extra_nfds` is redundant. It can only confuse the reader.
Closes#1439
With -Og, GCC complains:
easy.c:628:7: error: ‘mcode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
../lib/strcase.h:35:29: error: ‘tok_buf’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
vauth/digest.c:208:9: note: ‘tok_buf’ was declared here
../lib/strcase.h:35:29: error: ‘tok_buf’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
vauth/digest.c:566:15: note: ‘tok_buf’ was declared here
Fix this by initializing the variables.
The 'list element' struct now has to be within the data that is being
added to the list. Removes 16.6% (tiny) mallocs from a simple HTTP
transfer. (96 => 80)
Also removed return codes since the llist functions can't fail now.
Test 1300 updated accordingly.
Closes#1435
In that case, use libcurl's internal MD4 routine. This fixes tests 1013
and 1014 which were failing due to configure assuming NTLM and SMB were
always available whenever mbed TLS was in use (which is now true).
This fixes 3 warnings issued by MinGW:
1. PR_ImportTCPSocket actually has a paramter of type PROsfd instead of
PRInt32, which is 64 bits on Windows. Fixed this by including the
corresponding header file instead of redeclaring the function, which is
supported even though it is in the private include folder. [1]
2. In 64-bit mode, size_t is 64 bits while CK_ULONG is 32 bits, so an explicit
narrowing cast is needed.
3. Curl_timeleft returns time_t instead of long since commit
21aa32d30d.
[1] https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSPR/Reference/PR_ImportTCPSocket
Closes https://github.com/curl/curl/pull/1393
ERR_error_string with NULL parameter is not thread-safe. The library
writes the string into some static buffer. Two threads doing this at
once may clobber each other and run into problems. Switch to
ERR_error_string_n which avoids this problem and is explicitly
bounds-checked.
Also clean up some remnants of OpenSSL 0.9.5 around here. A number of
comments (fixed buffer size, explaining that ERR_error_string_n was
added in a particular version) date to when ossl_strerror tried to
support pre-ERR_error_string_n OpenSSLs.
Closes#1424
ssl_session_init was only introduced in version 1.3.8, the penultimate
version. The function only contains a memset, so replace it with that.
Suggested-by: Jay Satiro
Fixes https://github.com/curl/curl/issues/1401
The POSIX standard location is <poll.h>. Using <sys/poll.h> results in
warning spam when using the musl standard library.
Closes https://github.com/curl/curl/pull/1406
... because they may include an intermediate certificate for a client
certificate and the intermediate certificate needs to be presented to
the server, no matter if we verify the peer or not.
Reported-by: thraidh
Closes#851
When UNICODE is not defined, the Curl_convert_UTF8_to_tchar macro maps
directly to its argument. As it is declared as a pointer to const and
InitializeSecurityContext expects a pointer to non-const, both MSVC and MinGW
issue a warning about implicitly casting away the const. Fix this by declaring
the variables as pointers to non-const.
Closes https://github.com/curl/curl/pull/1394
Previously, periods of fast speed between periods of slow speed would
not count and could still erroneously trigger a timeout.
Reported-by: Paul Harris
Fixes#1345Closes#1390
Multi handles repeatedly invert the queue of pending easy handles when
used with CURLMOPT_MAX_TOTAL_CONNECTIONS. This is caused by a multistep
process involving Curl_splaygetbest and violates the FIFO property of
the multi handle.
This patch fixes this issue by redefining the "best" node in the
context of timeouts as the "smallest not larger than now", and
implementing the necessary data structure modifications to do this
effectively, namely:
- splay nodes with the same key are now stored in a doubly-linked
circular list instead of a non-circular one to enable O(1)
insertion to the tail of the list
- Curl_splayinsert inserts nodes with the same key to the tail of
the same list
- in case of multiple nodes with the same key, the one on the head of
the list gets selected
- Don't free postponed data on a connection that will be reused since
doing so can cause data loss when pipelining.
Only Windows builds are affected by this.
Closes https://github.com/curl/curl/issues/1380
Safe to silence warning adding time delta of poll, which can trigger on
Windows since sizeof time_t > sizeof long.
warning C4244: '+=' : conversion from 'time_t' to 'long', possible loss
of data
system.h is aimed to replace curlbuild.h at a later point in time when
we feel confident system.h works sufficiently well.
curl/system.h is currently used in parallel with curl/curlbuild.h
curl/system.h determines a data sizes, data types and include file
status based on available preprocessor defines instead of getting
generated at build-time. This, in order to avoid relying on a build-time
generated file that makes it complicated to do 32 and 64 bit bields from
the same installed set of headers.
Test 1541 verifies that system.h comes to the same conclusion that
curlbuild.h offers.
Closes#1373
telnet.c(1427,21): warning: comparison of constant 268435456 with
expression of type 'CURLcode' is always false
telnet.c(1433,21): warning: comparison of constant 268435457 with
expression of type 'CURLcode' is always false
Reviewed-by: Jay Satiro
Reported-by: Gisle Vanem
Bug: https://github.com/curl/curl/issues/1225#issuecomment-290340890Closes#1374
'left' is used as time_t but declared as long.
MinGW complains:
error: conversion to 'long int' from 'time_t {aka long long int}' may alter
its value [-Werror=conversion]
Changed the declaration to time_t.
At least under Windows, there is no SIZEOF_LONG, so it evaluates to 0 even
though sizeof(int) == sizeof(long). This should probably have been
CURL_SIZEOF_LONG, but the type of timeout_ms changed from long to time_t
anyway.
This triggered MSVC warning C4668 about implicitly replacing undefined
macros with '0'.
Closes https://github.com/curl/curl/pull/1362
If we use FTPS over CONNECT, the TLS handshake for the FTPS control
connection needs to be initiated in the SENDPROTOCONNECT state, not
the WAITPROXYCONNECT state. Otherwise, if the TLS handshake completed
without blocking, the information about the completed TLS handshake
would be saved to a wrong flag. Consequently, the TLS handshake would
be initiated in the SENDPROTOCONNECT state once again on the same
connection, resulting in a failure of the TLS handshake. I was able to
observe the failure with the NSS backend if curl ran through valgrind.
Note that this commit partially reverts curl-7_21_6-52-ge34131d.
When receiving chunked encoded data with trailers, and the write
callback returns PAUSE, there might be both body and header to store to
resend on unpause. Previously libcurl returned error for that case.
Added test case 1540 to verify.
Reported-by: Stephen Toub
Fixes#1354Closes#1357
When using basic-auth, connections and proxy connections
can be re-used with different Authorization headers since
it does not authenticate the connection (like NTLM does).
For instance, the below command should re-use the proxy
connection, but it currently doesn't:
curl -v -U alice:a -x http://localhost:8181http://localhost/
--next -U bob:b -x http://localhost:8181http://localhost/
This is a regression since refactoring of ConnectionExists()
as part of: cb4e2be7c6
Fix the above by removing the username and password compare
when re-using proxy connection at proxy_info_matches().
However, this fix brings back another bug would make curl
to re-print the old proxy-authorization header of previous
proxy basic-auth connection because it wasn't cleared.
For instance, in the below command the second request should
fail if the proxy requires authentication, but would succeed
after the above fix (and before aforementioned commit):
curl -v -U alice:a -x http://localhost:8181http://localhost/
--next -x http://localhost:8181http://localhost/
Fix this by clearing conn->allocptr.proxyuserpwd after use
unconditionally, same as we do for conn->allocptr.userpwd.
Also fix test 540 to not expect digest auth header to be
resent when connection is reused.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Closes https://github.com/curl/curl/pull/1350
- If SSL_get_error is called but no extended error detail is available
then show that SSL_ERROR_* as a string.
Prior to this change there was some inconsistency in that case: the
SSL_ERROR_* code may or may not have been shown, or may have been shown
as unknown even if it was known.
Ref: https://github.com/curl/curl/issues/1300
Closes https://github.com/curl/curl/pull/1348
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
A client MUST ignore any Content-Length or Transfer-Encoding header
fields received in a successful response to CONNECT.
"Successful" described as: 2xx (Successful). RFC 7231 4.3.6
Prior to this change such a case would cause an error.
In some ways this bug appears to be a regression since c50b878. Prior to
that libcurl may have appeared to function correctly in such cases by
acting on those headers instead of causing an error. But that behavior
was also incorrect.
Bug: https://github.com/curl/curl/issues/1317
Reported-by: mkzero@users.noreply.github.com
This flag is meant for the current request based on authentication
state, once the request is done we can clear the flag.
Also change auth.multi to auth.multipass for better readability.
Fixes https://github.com/curl/curl/issues/1095
Closes https://github.com/curl/curl/pull/1326
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Michael Kaufmann
This commit introduces the CURL_SSLVERSION_MAX_* constants as well as
the --tls-max option of the curl tool.
Closes https://github.com/curl/curl/pull/1166
This fixes assertion error which occurs when redirect is done with 0
length body via HTTP/2, and the easy handle is reused, but new
connection is established due to hostname change:
curl: http2.c:1572: ssize_t http2_recv(struct connectdata *,
int, char *, size_t, CURLcode *):
Assertion `httpc->drain_total >= data->state.drain' failed.
To fix this bug, ensure that http2_handle_stream is called.
Fixes#1286Closes#1302
... because it causes confusion with users. Example URLs:
"http://[127.0.0.1]:11211:80" which a lot of languages' URL parsers will
parse and claim uses port number 80, while libcurl would use port number
11211.
"http://user@example.com:80@localhost" which by the WHATWG URL spec will
be treated to contain user name 'user@example.com' but according to
RFC3986 is user name 'user' for the host 'example.com' and then port 80
is followed by "@localhost"
Both these formats are now rejected, and verified so in test 1260.
Reported-by: Orange Tsai
Mark intended fallthroughs with /* FALLTHROUGH */ so that gcc will know
it's expected and won't warn on [-Wimplicit-fallthrough=].
Closes https://github.com/curl/curl/pull/1297
In DarwinSSL the SSLSetPeerDomainName function is used to enable both
sending SNI and verifying the host. When host verification is disabled
the function cannot be called, therefore SNI is disabled as well.
Closes https://github.com/curl/curl/pull/1240
If size_t is 32 bits, MSVC warns:
warning C4310: cast truncates constant value
The warning is harmless as CURL_MASK_SCOFFT gets
truncated to the maximum value of size_t.
If the compile-time CURL_CA_BUNDLE location is defined use it as the
default value for the proxy CA bundle location, which is the same as
what we already do for the regular CA bundle location.
Ref: https://github.com/curl/curl/pull/1257
- Change CURLOPT_PROXY_CAPATH to return CURLE_NOT_BUILT_IN if the option
is not supported, which is the same as what we already do for
CURLOPT_CAPATH.
- Change the curl tool to handle CURLOPT_PROXY_CAPATH error
CURLE_NOT_BUILT_IN as a warning instead of as an error, which is the
same as what we already do for CURLOPT_CAPATH.
- Fix CAPATH docs to show that CURLE_NOT_BUILT_IN is returned when the
respective CAPATH option is not supported by the SSL library.
Ref: https://github.com/curl/curl/pull/1257
