MinGW-w64 defaults to targeting Windows 7 now, so GetTickCount64 is
used and the milliseconds are represented as unsigned long long,
leading to a compiler warning when implicitly converting them to long.
The previous fix for parsing IPv6 URLs with a zone index was a paddle
short for URLs without an explicit port. This patch fixes that case
and adds a unit test case.
This bug was highlighted by issue #3408, and while it's not the full
fix for the problem there it is an isolated bug that should be fixed
regardless.
Closes#3411
Reported-by: GitYuanQu on github
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
This adds support for wildcard hosts in CURLOPT_RESOLVE. These are
try-last so any non-wildcard entry is resolved first. If specified,
any host not matched by another CURLOPT_RESOLVE config will use this
as fallback.
Example send a.com to 10.0.0.1 and everything else to 10.0.0.2:
curl --resolve *:443:10.0.0.2 --resolve a.com:443:10.0.0.1 \
https://a.comhttps://b.com
This is probably quite similar to using:
--connect-to a.com:443:10.0.0.1:443 --connect-to :443:10.0.0.2:443
Closes#3406
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes#2873Closes#3383
Ensure to perform the checks we have to enforce a sane domain in
the cookie request. The check for non-PSL enabled builds is quite
basic but it's better than nothing.
Closes#2964
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION
options that allow a callback based approach to sending trailing headers
with chunked transfers.
The test server (sws) was updated to take into account the detection of the
end of transfer in the case of trailing headers presence.
Test 1591 checks that trailing headers can be sent using libcurl.
Closes#3350
Only allow secure origins to be able to write cookies with the
'secure' flag set. This reduces the risk of non-secure origins
to influence the state of secure origins. This implements IETF
Internet-Draft draft-ietf-httpbis-cookie-alone-01 which updates
RFC6265.
Closes#2956
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
A URL with a single colon without a portnumber should use the default
port, discarding the colon. Fix, add a testcase and also do little bit
of comment wordsmithing.
Closes#3365
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
... when not actually following the redirect. Otherwise we return error
for this and an application can't extract the value.
Test 1518 added to verify.
Reported-by: Pavel Pavlov
Fixes#3340Closes#3364
This adds a new unittest intended to cover the internal functions in
the urlapi code, starting with parse_port(). In order to avoid name
collisions in debug builds, parse_port() is renamed Curl_parse_port()
since it will be exported.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
- Include query in the path passed to generate HTTP auth.
Recent changes to use the URL API internally (46e1640, 7.62.0)
inadvertently broke authentication URIs by omitting the query.
Fixes https://github.com/curl/curl/issues/3353Closes#3356
Important for when the file is going to be read again and thus must not
contain old contents!
Adds test 327 to verify.
Reported-by: daboul on github
Fixes#3299Closes#3300
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
The tests 20 and 1322 are using getaddrinfo of libc for resolving. In
eglibc-2.19 there is a memory leakage and invalid free bug which
surfaces in some special circumstances (PF_UNSPEC hint with invalid or
non-existent names). The valgrind runs in testing fail in these
situations.
As the tests 20/1322 are not specific on either protocol (IPv4/IPv6)
this commit changes the hints to IPv4 protocol by passing `--ipv4` flag
on the tests' command line. This prevents the valgrind failures.
SO_EXCLUSIVEADDRUSE is on by default on Vista or newer,
but does not work together with SO_REUSEADDR being on.
The default changes were made with stunnel 5.34 and 5.35.
APPENDQUERY + URLENCODE would skip all equals signs but now it only skip
encoding the first to better allow "name=content" for any content.
Reported-by: Alexey Melnichuk
Fixes#3231Closes#3231
The function identifying a leading "scheme" part of the URL considered a
few letters ending with a colon to be a scheme, making something like
"short:80" to become an unknown scheme instead of a short host name and
a port number.
Extended test 1560 to verify.
Also fixed test203 to use file_pwd to make it get the correct path on
windows. Removed test 2070 since it was a duplicate of 203.
Assisted-by: Marcel Raad
Reported-by: Hagai Auro
Fixes#3220Fixes#3233Closes#3223Closes#3235
- for "--netrc", don't ignore the login/password specified with "--user",
only ignore the login/password in the URL.
This restores the netrc behaviour of curl 7.61.1 and earlier.
- fix the documentation of CURL_NETRC_REQUIRED
- improve the detection of login/password changes when reading .netrc
- don't read .netrc if both login and password are already set
Fixes#3213Closes#3224
The previous coding used a format string whose output depended on the
current locale of the environment running the test. Since the gist of
the test is to have a format string, with the actual formatting being
less important, switch to a more stable formatstring with decimals.
Reported-by: Marcel Raad
Closes#3234
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
The internal buffer in infof() is limited to 2048 bytes of payload plus
an additional byte for NULL termination. Servers with very long error
messages can however cause truncation of the string, which currently
isn't very clear, and leads to badly formatted output.
This appends a "...\n" (or just "..." in case the format didn't with a
newline char) marker to the end of the string to clearly show
that it has been truncated.
Also include a unittest covering infof() to try and catch any bugs
introduced in this quite important function.
Closes#3216
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
The function identifying a leading "scheme" part of the URL considered a few
letters ending with a colon to be a scheme, making something like "short:80"
to become an unknown scheme instead of a short host name and a port number.
Extended test 1560 to verify.
Reported-by: Hagai Auro
Fixes#3220Closes#3223
When not actually following the redirect and the target URL is only
stored for later retrieval, curl always accepted "non-supported"
schemes. This was a regression from 46e164069d.
Reported-by: Brad King
Fixes#3210Closes#3215
As has been outlined in the DEPRECATE.md document, the axTLS code has
been disabled for 6 months and is hereby removed.
Use a better supported TLS library!
Assisted-by: Daniel Gustafsson
Closes#3194
Classic MinGW has neither InitializeCriticalSectionEx nor
GetTickCount64, independent of the target Windows version.
Closes https://github.com/curl/curl/pull/3113
Now FILE transfers send headers to the header callback like HTTP and
other protocols. Also made curl_easy_getinfo(...CURLINFO_PROTOCOL...)
work for FILE in the callbacks.
Makes "curl -i file://.." and "curl -I file://.." work like before
again. Applied the bold header logic to them too.
Regression from c1c2762 (7.61.0)
Reported-by: Shaun Jackman
Fixes#3083Closes#3101
The LD_PRELOAD functionality doesn't exist on macOS, so skip any tests
requiring it.
Fixes#2394Closes#3106
Reported-by: Github user @jakirkham
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
To make it only send one DoH request and avoid the race condition that
could lead to the requests getting sent in reversed order and thus
making it hard to compare in the test case.
Fixes#3107Closes#3108
runtests.pl support running a range of tests, like "44 to 127". Starting
now, the code makes sure that even such given ranges will ignore tests
that are marked as disabled.
Disabled tests can still be run by explictly specifying that test
number.
Closes#3075
The value in question is coming directly from `gnutls-serv`, so it cannot
be modified freely.
Reported-by: Marcel Raad
Ref: 6ae6b2a533 (commitcomment-30621004)
This fixes potential out-of-buffer access on "file:./" URL
$ valgrind curl "file:./"
==24516== Memcheck, a memory error detector
==24516== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==24516== Using Valgrind-3.11.0 and LibVEX; rerun with -h for copyright info
==24516== Command: /home/even/install-curl-git/bin/curl file:./
==24516==
==24516== Conditional jump or move depends on uninitialised value(s)
==24516== at 0x4C31F9C: strcmp (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==24516== by 0x4EBB315: seturl (urlapi.c:801)
==24516== by 0x4EBB568: parseurl (urlapi.c:861)
==24516== by 0x4EBC509: curl_url_set (urlapi.c:1199)
==24516== by 0x4E644C6: parseurlandfillconn (url.c:2044)
==24516== by 0x4E67AEF: create_conn (url.c:3613)
==24516== by 0x4E68A4F: Curl_connect (url.c:4119)
==24516== by 0x4E7F0A4: multi_runsingle (multi.c:1440)
==24516== by 0x4E808E5: curl_multi_perform (multi.c:2173)
==24516== by 0x4E7558C: easy_transfer (easy.c:686)
==24516== by 0x4E75801: easy_perform (easy.c:779)
==24516== by 0x4E75868: curl_easy_perform (easy.c:798)
Was originally spotted by
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10637
Credit to OSS-Fuzz
Closes#3039
- replace tabs with spaces where possible
- remove line ending spaces
- remove double/triple newlines at EOF
- fix a non-UTF-8 character
- cleanup a few indentations/line continuations
in manual examples
Closes https://github.com/curl/curl/pull/3037
In order for this API to fully work for libcurl itself, it now offers a
CURLU_GUESS_SCHEME flag that makes it "guess" scheme based on the host
name prefix just like libcurl always did. If there's no known prefix, it
will guess "http://".
Separately, it relaxes the check of the host name so that IDN host names
can be passed in as well.
Both these changes are necessary for libcurl itself to use this API.
Assisted-by: Daniel Gustafsson
Closes#3018
The previous test certificates contained RSA keys of only 1024 bits.
However, RSA claims that 1024-bit RSA keys are likely to become
crackable some time before 2010. The NIST recommends at least 2048-bit
keys for RSA for now.
Better use full 2048 also for testing.
Closes#2973
Add functionality so that protocols can do custom keepalive on their
connections, when an external API function is called.
Add docs for the new options in 7.62.0
Closes#1641
... and add "MAILINDEX".
As described in #2789, this is a suggested solution. Changing UID=xx to
actually get mail with UID xx and add "MAILINDEX" to get a mail with a
special index in the mail box (old behavior). So MAILINDEX=1 gives the
first non deleted mail in the mail box.
Fixes#2789Closes#2815
Transparently. The related curl_multi_setopt() options all still returns
OK when pipelining is selected.
To re-enable the support, the single line change in lib/multi.c needs to
be reverted.
See docs/DEPRECATE.md
Closes#2705
According to RFC6265 section 5.4, cookies with equal path lengths
SHOULD be sorted by creation-time (earlier first). This adds a
creation-time record to the cookie struct in order to make cookie
sorting more deterministic. The creation-time is defined as the
order of the cookies in the jar, the first cookie read fro the
jar being the oldest. The creation-time is thus not serialized
into the jar. Also remove the strcmp() matching in the sorting as
there is no lexicographic ordering in RFC6265. Existing tests are
updated to match.
Closes#2524
All these tests failed on Windows because something like
sftp://%HOSTIP:%SSHPORT%PWD/
expanded to
sftp://127.0.0.1:1234c:/msys64/home/bla/curl
and then curl complained about the port number ending with a letter.
Use the original POSIX path instead of the Windows path created in
checksystem to fix this.
Closes https://github.com/curl/curl/pull/2920
Since GOPHER support was added in curl `?' character was automatically
translated to `%09' (`\t').
However, this behaviour does not seems documented in RFC 4266 and for
search selectors it is documented to directly use `%09' in the URL.
Apart that several gopher servers in the current gopherspace have CGI
support where `?' is used as part of the selector and translating it to
`%09' often leads to surprising results.
Closes#2910
Modifying the locale with environment variables doesn't work for native
Windows applications. Just disable the test in this case if the decimal
separator is something different than a point. Use a precheck with a
small C program to achieve that.
Closes https://github.com/curl/curl/pull/2786
This warning used to be enabled only for clang as it's a bit stricter
on GCC. Silence the remaining occurrences and enable it on GCC too.
Closes https://github.com/curl/curl/pull/2747
... simply because this is usually a sign of the user having omitted the
file name and the next option is instead "eaten" by the parser as a file
name.
Add test1268 to verify
Closes#2885
Deal with tiny "HTTP/0.9" (header-less) responses by checking the
status-line early, even before a full "HTTP/" is received to allow
detecting 0.9 properly.
Test 1266 and 1267 added to verify.
Fixes#2420Closes#2872
Previously, the macro TEST_HANG_TIMEOUT was unused, but since there is
looping going on, we might as well add timing instead of removing it.
Closes#2853
This allows the use of PKCS#11 URI for certificates and keys without
setting the corresponding type as "ENG" and the engine as "pkcs11"
explicitly. If a PKCS#11 URI is provided for certificate, key,
proxy_certificate or proxy_key, the corresponding type is set as "ENG"
if not provided and the engine is set to "pkcs11" if not provided.
Acked-by: Nikos Mavrogiannopoulos
Closes#2333
Use standard CMake variable BUILD_SHARED_LIBS instead of introducing
custom option CURL_STATICLIB.
Use '-DBUILD_SHARED_LIBS=%SHARED%' in appveyor.yml.
Reviewed-by: Sergei Nikulov
Closes#2755
Turns out that since we're using the native fnmatch function now when
available, and they simply disagree on a huge number of test patterns
that make it hard to test this function like this...
Fixes#2825
Otherwise, LF line endings are converted to CRLF on Windows,
but no conversion is done for the reply, so the test case fails.
Closes https://github.com/curl/curl/pull/2776
It was previously erroneously skipped in some situations.
libtest/libntlmconnect.c wrongly depended on wrong behavior (that it
would get a zero timeout) when no handles are "running" in a multi
handle. That behavior is no longer present with this fix. Now libcurl
will always return a -1 timeout when all handles are completed.
Closes#2733
When the application just started the transfer and then stops it while
the name resolve in the background thread hasn't completed, we need to
wait for the resolve to complete and then cleanup data accordingly.
Enabled test 1553 again and added test 1590 to also check when the host
name resolves successfully.
Detected by OSS-fuzz.
Closes#1968
- Get rid of variable that was generating false positive warning
(unitialized)
- Fix issues in tests
- Reduce scope of several variables all over
etc
Closes#2631
Since 467da3af0, lib1521.c is generated instead of checked in. According
to the commit message, the intention was to remove it from the tarball
as well. However, it is still present when running make dist. To remove
it, add it to nodist_lib1521_SOURCES. This also means there is no need
for the manually added dist-rule in the Makefile.
Also update CMakelists.txt to handle the fact that we now may have
nodist_SOURCES.
If configure detects fnmatch to be available, use that instead of our
custom one for FTP wildcard pattern matching. For standard compliance,
to reduce our footprint and to use already well tested and well
exercised code.
A POSIX fnmatch behaves slightly different than the internal function
for a few test patterns currently and the macOS one yet slightly
different. Test case 1307 is adjusted for these differences.
Closes#2626
A non-escaped bracket ([) is for a character group - as documented. It
will *not* match an individual bracket anymore. Test case 1307 updated
accordingly to match.
Problem detected by OSS-Fuzz, although this fix is probably not a final
fix for the notorious timeout issues.
Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=8525Closes#2614
This avoids appending error data to already existing good data.
Test 92 is updated to match this change.
New test 1156 checks all combinations of --range/--resume, --fail,
Content-Range header and http status code 200/416.
Fixes#1163
Reported-By: Ithubg on github
Closes#2578
The feature is only enabled if the output is believed to be a tty.
-J: There's some minor differences and improvements in -J handling, as
now J should work with -i and it actually creates a file first using the
initial name and then *renames* that to the one found in
Content-Disposition (if any).
-i: only shows headers for HTTP transfers now (as documented).
Previously it would also show for pieces of the transfer that were HTTP
(for example when doing FTP over a HTTP proxy).
-i: now shows trailers as well. Previously they were not shown at all.
--libcurl: the CURLOPT_HEADER is no longer set, as the header output is
now done in the header callback.
The previous limit of 5 can still end up in situation that takes a very
long time and consumes a lot of CPU.
If there is still a rare use case for this, a user can provide their own
fnmatch callback for a version that allows a larger set of wildcards.
This commit was triggered by yet another OSS-Fuzz timeout due to this.
Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=8369Closes#2587
Provide a set of new timers that return the time intervals using integer
number of microseconds instead of floats.
The new info names are as following:
CURLINFO_APPCONNECT_TIME_T
CURLINFO_CONNECT_TIME_T
CURLINFO_NAMELOOKUP_TIME_T
CURLINFO_PRETRANSFER_TIME_T
CURLINFO_REDIRECT_TIME_T
CURLINFO_STARTTRANSFER_TIME_T
CURLINFO_TOTAL_TIME_T
Closes#2495
RFC 6265 section 4.2.1 does not set restrictions on cookie names.
This is a follow-up to commit 7f7fcd0.
Also explicitly check proper syntax of cookie name/value pair.
New test 1155 checks that cookie names are not reserved words.
Reported-By: anshnd at github
Fixes#2564Closes#2566
... and make test 1026 rely on that feature so that --disable-manual
builds don't cause test failures.
Reported-by: Max Dymond and Anders Roxell
Fixes#2533Closes#2540
This extends the INDENTATION case to also handle 'else' statements
and require proper indentation on the following line. Also fixes the
offending cases found in the codebase.
Closes#2532
- Move verify_certificate functionality in schannel.c into a new
file called schannel_verify.c. Additionally, some structure defintions
from schannel.c have been moved to schannel.h to allow them to be
used in schannel_verify.c.
- Make verify_certificate functionality for Schannel available on
all versions of Windows instead of just Windows CE. verify_certificate
will be invoked on Windows CE or when the user specifies
CURLOPT_CAINFO and CURLOPT_SSL_VERIFYPEER.
- In verify_certificate, create a custom certificate chain engine that
exclusively trusts the certificate store backed by the CURLOPT_CAINFO
file.
- doc updates of --cacert/CAINFO support for schannel
- Use CERT_NAME_SEARCH_ALL_NAMES_FLAG when invoking CertGetNameString
when available. This implements a TODO in schannel.c to improve
handling of multiple SANs in a certificate. In particular, all SANs
will now be searched instead of just the first name.
- Update tool_operate.c to not search for the curl-ca-bundle.crt file
when using Schannel to maintain backward compatibility. Previously,
any curl-ca-bundle.crt file found in that search would have been
ignored by Schannel. But, with CAINFO support, the file found by
that search would have been used as the certificate store and
could cause issues for any users that have curl-ca-bundle.crt in
the search path.
- Update url.c to not set the build time CURL_CA_BUNDLE if the selected
SSL backend is Schannel. We allow setting CA location for schannel
only when explicitly specified by the user via CURLOPT_CAINFO /
--cacert.
- Add new test cases 3000 and 3001. These test cases check that the first
and last SAN, respectively, matches the connection hostname. New test
certificates have been added for these cases. For 3000, the certificate
prefix is Server-localhost-firstSAN and for 3001, the certificate
prefix is Server-localhost-secondSAN.
- Remove TODO 15.2 (Add support for custom server certificate
validation), this commit addresses it.
Closes https://github.com/curl/curl/pull/1325
When a zeroed out allocation is required, use calloc() rather than
malloc() followed by an explicit memset(). The result will be the
same, but using calloc() everywhere increases consistency in the
codebase and avoids the risk of subtle bugs when code is injected
between malloc and memset by accident.
Closes https://github.com/curl/curl/pull/2497
unit1309 and vtls/gtls: error: arithmetic on a null pointer treated as a
cast from integer to pointer is a GNU extension
Reported-by: Rikard Falkeborn
Fixes#2466Closes#2468
curl 7.57.0 and up interpret this according to Appendix E.3.2 of RFC
8089 but then returns an error saying this is unimplemented. This is
actually a regression in behavior on both Windows and Unix.
Before curl 7.57.0 this URL was treated as a path of "//foo/bar" and
then passed to the relevant OS API. This means that the behavior of this
case is actually OS dependent.
The Unix path resolution rules say that the OS must handle swallowing
the extra "/" and so this path is the same as "/foo/bar"
The Windows path resolution rules say that this is a UNC path and
automatically handles the SMB access for the program. So curl on Windows
was already doing Appendix E.3.2 without any special code in curl.
Regression
Closes#2438
This fixes a segfault occurring when a name of the (invalid) form "domain..tld"
is processed.
test46 updated to cover this case.
Follow-up to commit c990ead.
Ref: https://github.com/curl/curl/pull/2440
This patch adds CURLOPT_DNS_SHUFFLE_ADDRESSES to explicitly request
shuffling of IP addresses returned for a hostname when there is more
than one. This is useful when the application knows that a round robin
approach is appropriate and is willing to accept the consequences of
potentially discarding some preference order returned by the system's
implementation.
Closes#1694
Detected by Coverity Analysis:
Error: IDENTIFIER_TYPO:
curl-7.58.0/tests/python_dependencies/impacket/spnego.py:229: identifier_typo: Using "SuportedMech" appears to be a typo:
* Identifier "SuportedMech" is only known to be referenced here, or in copies of this code.
* Identifier "SupportedMech" is referenced elsewhere at least 4 times.
curl-7.58.0/tests/python_dependencies/impacket/smbserver.py:2651: identifier_use: Example 1: Using identifier "SupportedMech".
curl-7.58.0/tests/python_dependencies/impacket/smbserver.py:2308: identifier_use: Example 2: Using identifier "SupportedMech".
curl-7.58.0/tests/python_dependencies/impacket/spnego.py:252: identifier_use: Example 3: Using identifier "SupportedMech" (2 total uses in this function).
curl-7.58.0/tests/python_dependencies/impacket/spnego.py:229: remediation: Should identifier "SuportedMech" be replaced by "SupportedMech"?
Closes#2379
Refuse to operate when given path components featuring byte values lower
than 32.
Previously, inserting a %00 sequence early in the directory part when
using the 'singlecwd' ftp method could make curl write a zero byte
outside of the allocated buffer.
Test case 340 verifies.
CVE-2018-1000120
Reported-by: Duy Phan Thanh
Bug: https://curl.haxx.se/docs/adv_2018-9cd6.html
When targeting x64, MinGW-w64 complains about conversions between
32-bit long and 64-bit pointers. Fix this by reusing the
GNUTLS_POINTER_TO_SOCKET_CAST / GNUTLS_SOCKET_TO_POINTER_CAST logic
from gtls.c, moving it to warnless.h as CURLX_POINTER_TO_INTEGER_CAST /
CURLX_INTEGER_TO_POINTER_CAST.
Closes https://github.com/curl/curl/pull/2341
- Add new option CURLOPT_RESOLVER_START_FUNCTION to set a callback that
will be called every time before a new resolve request is started
(ie before a host is resolved) with a pointer to backend-specific
resolver data. Currently this is only useful for ares.
- Add new option CURLOPT_RESOLVER_START_DATA to set a user pointer to
pass to the resolver start callback.
Closes https://github.com/curl/curl/pull/2311
This enables users to preresolve but still take advantage of happy
eyeballs and trying multiple addresses if some are not connecting.
Ref: https://github.com/curl/curl/pull/2260
Test 319 checks proper raw mode data with non-chunked gzip
transfer-encoded server data.
Test 326 checks raw mode with chunked server data.
Bug: #2303Closes#2308
RFC 5321 4.1.1.4 specifies the CRLF terminating the DATA command
should be taken into account when chasing the <CRLF>.<CRLF> end marker.
Thus a leading dot character in data is also subject to escaping.
Tests 911 and test server are adapted to this situation.
New tests 951 and 952 check proper handling of initial dot in data.
Closes#2304
Whenever an expected pattern syntax rule cannot be matched, the
character starting the rule loses its special meaning and the parsing
is resumed:
- backslash at the end of pattern string matches itself.
- Error in [:keyword:] results in set containing :\[dekorwy.
Unit test 1307 updated for this new situation.
Closes#2273
... since the libc provided one are locale dependent in a way we don't
want. Also, the "native" isalnum() (for example) works differently on
different platforms which caused test 1307 failures on macos only.
Closes#2269
If CURL_DOES_CONVERSION is enabled, uploaded LFs are mapped to CRLFs,
giving a result that is different from what is expected.
This commit avoids using CURLOPT_TRANSFERTEXT and directly encodes data
to upload in ascii.
Bug: https://github.com/curl/curl/pull/1872
Make curl_getdate() handle dates before 1970 as well (returning negative
values).
Make test 517 test dates for 64 bit time_t.
This fixes bug (3) mentioned in #2238Closes#2250
... unless CURLOPT_UNRESTRICTED_AUTH is set to allow them. This matches how
curl already handles Authorization headers created internally.
Note: this changes behavior slightly, for the sake of reducing mistakes.
Added test 317 and 318 to verify.
Reported-by: Craig de Stigter
Bug: https://curl.haxx.se/docs/adv_2018-b3bf.html
Get screen width from the environment variable COLUMNS first, if set. If
not, use ioctl(). If nether works, assume 79.
Closes#2242
The "refresh" is for the -# output when no total transfer size is
known. It will now only use a single updated line even for this case:
The "-=O=-" ship moves when data is transferred. The four flying
"hashes" move (on a sine wave) on each refresh, independent of data.
vtls.c:multissl_init() might do a curl_free() call so strip that out to
make this work with more builds. We just want to verify that
memorytracking works so skipping one line is no harm.
A mime tree attached to an easy handle using CURLOPT_MIMEPOST is
strongly bound to the handle: there is a pointer to the easy handle in
each item of the mime tree and following the parent pointer list
of mime items ends in a dummy part stored within the handle.
Because of this binding, a mime tree cannot be shared between different
easy handles, thus it needs to be cloned upon easy handle duplication.
There is no way for the caller to get the duplicated mime tree
handle: it is then set to be automatically destroyed upon freeing the
new easy handle.
New test 654 checks proper mime structure duplication/release.
Add a warning note in curl_mime_data_cb() documentation about sharing
user data between duplicated handles.
Closes#2235
Decoding loop implementation did not concern the case when all
received data is consumed by Brotli decoder and the size of decoded
data internally hold by Brotli decoder is greater than CURL_MAX_WRITE_SIZE.
For content with unencoded length greater than CURL_MAX_WRITE_SIZE this
can result in the loss of data at the end of content.
Closes#2194
Move curl_mime_initpart() and curl_mime_cleanpart() calls to lower-level
functions dealing with UserDefined structure contents.
This avoids memory leakages on curl-generated part mime headers.
New test 2073 checks this using the cli tool --next option: it
triggers a valgrind error if bug is present.
Bug: https://curl.haxx.se/mail/lib-2017-12/0060.html
Reported-by: Martin Galvan
- When zlib version is < 1.2.0.4, process gzip trailer before considering
extra data as an error.
- Inflate with Z_BLOCK instead of Z_SYNC_FLUSH to maximize correct data
and minimize corrupt data output.
- Do not try to restart deflate decompression in raw mode if output has
started or if the leading data is not available anymore.
- New test 232 checks inflating raw-deflated content.
Closes#2068
This reverts commit 9ffad8eb13.
It was actually added rather recently in 8e8afa82cb due to a crash
that would otherwise happen in the RTSP code. As I don't think we've
fixed that behavior yet, we better keep this work-around until we have
fixed it better.
Prune the DNS cache immediately after the dns entry is unlocked in
multi_done. Timed out entries will then get discarded in a more orderly
fashion.
Test506 is updated
Reported-by: Oleg Pudeyev
Fixes#2169Closes#2170
That data is only ever used by the CURLOPT_INTERLEAVEFUNCTION callback
and that option isn't set or used by the curl tool!
Updates the 9 tests that verify --libcurl
Closes#2167
If the lock is released before the dealings with the bundle is over, it may
have changed by another thread in the mean time.
Fixes#2132Fixes#2151Closes#2139
For pop3/imap/smtp, added test 891 to somewhat verify the pop3
case.
For this, I enhanced the pingpong test server to be able to send back
responses with LF-only instead of always using CRLF.
Closes#2150
This SFTP test fails with libssh back-end due to failure to verify
the peer. Disable peer verification in the test as there seems to
be the intention of the test.
Note that the libssh back-end automatically verifies the peer's
host using the default known_hosts file.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
That also updates tests to expect the right error code
libssh2 back-end returns CURLE_SSH error if the remote file
is not found. Expect instead CURLE_REMOTE_FILE_NOT_FOUND
which is sent by the libssh backend.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
Host names like "127.0.0.1 moo" would otherwise be accepted by some
getaddrinfo() implementations.
Updated test 1034 and 1035 accordingly.
Fixes#2073Closes#2092
... so that IPv6 addresses can be passed like they can for connect-to
and how they're used in URLs.
Added test 1324 to verify
Reported-by: Alex Malinovich
Fixes#2087Closes#2091
This uses the brotli external library (https://github.com/google/brotli).
Brotli becomes a feature: additional curl_version_info() bit and
structure fields are provided for it and CURLVERSION_NOW bumped.
Tests 314 and 315 check Brotli content unencoding with correct and
erroneous data.
Some tests are updated to accomodate with the now configuration dependent
parameters of the Accept-Encoding header.
This is implemented as an output streaming stack of unencoders, the last
calling the client write procedure.
New test 230 checks this feature.
Bug: https://github.com/curl/curl/pull/2002
Reported-By: Daniel Bankhead
By properly keeping track of the last entry in the list of URLs/uploads
to handle, curl now avoids many meaningless traverses of the list which
speeds up many-URL handling *MASSIVELY* (several magnitudes on 100K
URLs).
Added test 1291, to verify that it doesn't take ages - but we don't have
any detection of "too slow" command in the test suite.
Reported-by: arainchik on github
Fixes#1959Closes#2052
... which is valid according to documentation. Regression since
f121575c0b.
Verified now in test 501.
Reported-by: cbartl on github
Fixes#2038Closes#2039
Also upgrade test 1133 to cover this case and clarify man page about
form data quoting.
Bug: https://github.com/curl/curl/issues/2022
Reported-By: omau on github
... since the 'tv' stood for timeval and this function does not return a
timeval struct anymore.
Also, cleaned up the Curl_timediff*() functions to avoid typecasts and
clean up the descriptive comments.
Closes#2011
... to cater for systems with unsigned time_t variables.
- Renamed the functions to curlx_timediff and Curl_timediff_us.
- Added overflow protection for both of them in either direction for
both 32 bit and 64 bit time_ts
- Reprefixed the curlx_time functions to use Curl_*
Reported-by: Peter Piekarski
Fixes#2004Closes#2005
If stdin is not a regular file, its content is memory-buffered to enable
a possible data "rewind".
In all cases, stdin data size is determined before real use to avoid
having an unknown part's size.
--libcurl generated code is left as an unbuffered stdin fread/fseek callback
part with unknown data size.
Buffering is not supported in deprecated curl_formadd() API.
