Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes#4163
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes#3500
This is done by making sure each individual transfer is first added to a
linked list as then they can be performed serially, or at will, in
parallel.
Closes#3804
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72ca9499ff8c1cc36c2a8d520edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a13.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2f.
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
... since libcurl has started to be totally unaware of options for
disabled protocols they now return error.
Bug: c9c5304dd4 (commitcomment-33533937)
Reported-by: Marcel Raad
Closes#3886
Use long for CURLOPT_HTTP09_ALLOWED to fix the following warning:
tool_operate.c: In function 'operate_do':
../include/curl/typecheck-gcc.h:47:9: error: call to
'_curl_easy_setopt_err_long' declared with attribute warning:
curl_easy_setopt expects a long argument for this option [-Werror]
Closes https://github.com/curl/curl/pull/3534
Stick to "Schannel" everywhere. The configure option --with-winssl is
kept to allow existing builds to work but --with-schannel is added as an
alias.
Closes#3504
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes#2873Closes#3383
The tool's local port command line range parser didn't check for integer
overflows and could pass "weird" data to libcurl for this option.
libcurl however, has a strict range check for the values so it rejects
anything outside of the accepted range.
Reported-by: Brian Carpenter
Closes#3242
This allows the use of PKCS#11 URI for certificates and keys without
setting the corresponding type as "ENG" and the engine as "pkcs11"
explicitly. If a PKCS#11 URI is provided for certificate, key,
proxy_certificate or proxy_key, the corresponding type is set as "ENG"
if not provided and the engine is set to "pkcs11" if not provided.
Acked-by: Nikos Mavrogiannopoulos
Closes#2333
Adds CURLOPT_TLS13_CIPHERS and CURLOPT_PROXY_TLS13_CIPHERS.
curl: added --tls13-ciphers and --proxy-tls13-ciphers
Fixes#2435
Reported-by: zzq1015 on github
Closes#2607
The feature is only enabled if the output is believed to be a tty.
-J: There's some minor differences and improvements in -J handling, as
now J should work with -i and it actually creates a file first using the
initial name and then *renames* that to the one found in
Content-Disposition (if any).
-i: only shows headers for HTTP transfers now (as documented).
Previously it would also show for pieces of the transfer that were HTTP
(for example when doing FTP over a HTTP proxy).
-i: now shows trailers as well. Previously they were not shown at all.
--libcurl: the CURLOPT_HEADER is no longer set, as the header output is
now done in the header callback.
This extends the INDENTATION case to also handle 'else' statements
and require proper indentation on the following line. Also fixes the
offending cases found in the codebase.
Closes#2532
- Move verify_certificate functionality in schannel.c into a new
file called schannel_verify.c. Additionally, some structure defintions
from schannel.c have been moved to schannel.h to allow them to be
used in schannel_verify.c.
- Make verify_certificate functionality for Schannel available on
all versions of Windows instead of just Windows CE. verify_certificate
will be invoked on Windows CE or when the user specifies
CURLOPT_CAINFO and CURLOPT_SSL_VERIFYPEER.
- In verify_certificate, create a custom certificate chain engine that
exclusively trusts the certificate store backed by the CURLOPT_CAINFO
file.
- doc updates of --cacert/CAINFO support for schannel
- Use CERT_NAME_SEARCH_ALL_NAMES_FLAG when invoking CertGetNameString
when available. This implements a TODO in schannel.c to improve
handling of multiple SANs in a certificate. In particular, all SANs
will now be searched instead of just the first name.
- Update tool_operate.c to not search for the curl-ca-bundle.crt file
when using Schannel to maintain backward compatibility. Previously,
any curl-ca-bundle.crt file found in that search would have been
ignored by Schannel. But, with CAINFO support, the file found by
that search would have been used as the certificate store and
could cause issues for any users that have curl-ca-bundle.crt in
the search path.
- Update url.c to not set the build time CURL_CA_BUNDLE if the selected
SSL backend is Schannel. We allow setting CA location for schannel
only when explicitly specified by the user via CURLOPT_CAINFO /
--cacert.
- Add new test cases 3000 and 3001. These test cases check that the first
and last SAN, respectively, matches the connection hostname. New test
certificates have been added for these cases. For 3000, the certificate
prefix is Server-localhost-firstSAN and for 3001, the certificate
prefix is Server-localhost-secondSAN.
- Remove TODO 15.2 (Add support for custom server certificate
validation), this commit addresses it.
Closes https://github.com/curl/curl/pull/1325
Only treat response code as FTP response codes in case the
protocol type is FTP.
This fixes an issue where an HTTP download was treated as FTP
in case libcurl returned with 33. This happens when the
download has already finished and the server responses 416:
HTTP/1.1 416 Requested Range Not Satisfiable
This should not be treated as an FTP error.
Fixes#2464Closes#2465
- In keeping with the naming of our other connect timeout options rename
CURLOPT_HAPPY_EYEBALLS_TIMEOUT to CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.
This change adds the _MS suffix since the option expects milliseconds.
This is more intuitive for our users since other connect timeout options
that expect milliseconds use _MS such as CURLOPT_TIMEOUT_MS,
CURLOPT_CONNECTTIMEOUT_MS, CURLOPT_ACCEPTTIMEOUT_MS.
The tool option already uses an -ms suffix, --happy-eyeballs-timeout-ms.
Follow-up to 2427d94 which added the lib and tool option yesterday.
Ref: https://github.com/curl/curl/pull/2260
- Add new option CURLOPT_HAPPY_EYEBALLS_TIMEOUT to set libcurl's happy
eyeball timeout value.
- Add new optval macro CURL_HET_DEFAULT to represent the default happy
eyeballs timeout value (currently 200 ms).
- Add new tool option --happy-eyeballs-timeout-ms to expose
CURLOPT_HAPPY_EYEBALLS_TIMEOUT. The -ms suffix is used because the
other -timeout options in the tool expect seconds not milliseconds.
Closes https://github.com/curl/curl/pull/2260
This reverts commit 9ffad8eb13.
It was actually added rather recently in 8e8afa82cb due to a crash
that would otherwise happen in the RTSP code. As I don't think we've
fixed that behavior yet, we better keep this work-around until we have
fixed it better.
That data is only ever used by the CURLOPT_INTERLEAVEFUNCTION callback
and that option isn't set or used by the curl tool!
Updates the 9 tests that verify --libcurl
Closes#2167
When curl and libcurl are built with some protocols disabled, they stop
setting and receiving some options that don't make sense with those
protocols. In particular, when HTTP is disabled many options aren't set
that are used only by HTTP. However, some options that appear to be
HTTP-only are actually used by other protocols as well (some despite
having HTTP in the name) and should be set, but weren't. This change now
causes some of these options to be set and used for more (or for all)
protocols. In particular, this fixes tests 646 through 649 in an
HTTP-disabled build, which use the MIME API in the mail protocols.
The previous message was just too long for ordinary people and it was
encouraging users to use `--insecure` a little too easy.
Based-on-work-by: Frank Denis
Closes#1810Closes#1817
The required low-level logic was already available as part of
`libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1]
option.)
This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION`
(boolean) and the new `curl` command-line option `--compressed-ssh`
to request this `libssh2` feature. To have compression enabled, it
is required that the SSH server supports a (zlib) compatible
compression method and that `libssh2` was built with `zlib` support
enabled.
[1] https://www.libssh2.org/libssh2_session_flag.html
Ref: https://github.com/curl/curl/issues/1732
Closes https://github.com/curl/curl/pull/1735
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes#1280Closes#1462
... unless "--output -" is used. Binary detection is done by simply
checking for a binary zero in early data.
Added test 1425 1426 to verify.
Closes#1512
... and USE_ENVIRONMENT and --environment. It was once added for RISC OS
support and its platform specific behavior has been annoying ever
since. Added in commit c3c8bbd3b2, mostly unchanged since
then. Most probably not actually used for years.
Closes#1463
Test command 'time curl http://localhost/80GB -so /dev/null' on a Debian
Linux.
Before (middle performing run out 9):
real 0m28.078s
user 0m11.240s
sys 0m12.876s
After (middle performing run out 9)
real 0m26.356s (93.9%)
user 0m5.324s (47.4%)
sys 0m8.368s (65.0%)
Also, doing SFTP over a 200 millsecond latency link is now about 6 times
faster.
Closes#1446
MinGW complains:
tool_operate.c:197:15: error: comparison is always true due to limited range
of data type [-Werror=type-limits]
Fix this by only doing the comparison if 'long' is large enough to hold the
constant it is compared with.
Closes https://github.com/curl/curl/pull/1378
- Show the HTTPS-proxy options on CURLE_SSL_CACERT if libcurl was built
with HTTPS-proxy support.
Prior to this change those options were shown only if an HTTPS-proxy was
specified by --proxy, but that did not take into account environment
variables such as http_proxy, https_proxy, etc. Follow-up to e1187c4.
Bug: https://github.com/curl/curl/issues/1331
Reported-by: Nehal J Wani
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
This commit introduces the CURL_SSLVERSION_MAX_* constants as well as
the --tls-max option of the curl tool.
Closes https://github.com/curl/curl/pull/1166
- Change CURLOPT_PROXY_CAPATH to return CURLE_NOT_BUILT_IN if the option
is not supported, which is the same as what we already do for
CURLOPT_CAPATH.
- Change the curl tool to handle CURLOPT_PROXY_CAPATH error
CURLE_NOT_BUILT_IN as a warning instead of as an error, which is the
same as what we already do for CURLOPT_CAPATH.
- Fix CAPATH docs to show that CURLE_NOT_BUILT_IN is returned when the
respective CAPATH option is not supported by the SSL library.
Ref: https://github.com/curl/curl/pull/1257
When CURLE_SSL_CACERT occurs the tool shows a lengthy error message to
the user explaining possible solutions such as --cacert and --insecure.
This change appends to that message similar options --proxy-cacert and
--proxy-insecure when there's a specified HTTPS proxy.
Closes https://github.com/curl/curl/issues/1258
In addition to unix domain sockets, Linux also supports an
abstract namespace which is independent of the filesystem.
In order to support it, add new CURLOPT_ABSTRACT_UNIX_SOCKET
option which uses the same storage as CURLOPT_UNIX_SOCKET_PATH
internally, along with a flag to specify abstract socket.
On non-supporting platforms, the abstract address will be
interpreted as an empty string and fail gracefully.
Also add new --abstract-unix-socket tool parameter.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Chungtsun Li (typeless)
Reviewed-by: Daniel Stenberg
Reviewed-by: Peter Wu
Closes#1197Fixes#1061
The <netinet/tcp.h> is a leftover from the past when TCP socket options
were set in this file. This include causes build issues on AIX 4.3.
Reported-by: Kim Minjoong
Closes#1178
CURLOPT_SOCKS_PROXY -> CURLOPT_PRE_PROXY
Added the corresponding --preroxy command line option. Sets a SOCKS
proxy to connect to _before_ connecting to a HTTP(S) proxy.
... the newly introduced CURLOPT_SOCKS_PROXY is special and should be
asked for specially. (Needs new code.)
Unified proxy type to a single variable in the config struct.
This was added as part of the SOCKS+HTTPS proxy merge but there's no
need to support this as we prefer to have the protocol specified as a
prefix instead.
* HTTPS proxies:
An HTTPS proxy receives all transactions over an SSL/TLS connection.
Once a secure connection with the proxy is established, the user agent
uses the proxy as usual, including sending CONNECT requests to instruct
the proxy to establish a [usually secure] TCP tunnel with an origin
server. HTTPS proxies protect nearly all aspects of user-proxy
communications as opposed to HTTP proxies that receive all requests
(including CONNECT requests) in vulnerable clear text.
With HTTPS proxies, it is possible to have two concurrent _nested_
SSL/TLS sessions: the "outer" one between the user agent and the proxy
and the "inner" one between the user agent and the origin server
(through the proxy). This change adds supports for such nested sessions
as well.
A secure connection with a proxy requires its own set of the usual SSL
options (their actual descriptions differ and need polishing, see TODO):
--proxy-cacert FILE CA certificate to verify peer against
--proxy-capath DIR CA directory to verify peer against
--proxy-cert CERT[:PASSWD] Client certificate file and password
--proxy-cert-type TYPE Certificate file type (DER/PEM/ENG)
--proxy-ciphers LIST SSL ciphers to use
--proxy-crlfile FILE Get a CRL list in PEM format from the file
--proxy-insecure Allow connections to proxies with bad certs
--proxy-key KEY Private key file name
--proxy-key-type TYPE Private key file type (DER/PEM/ENG)
--proxy-pass PASS Pass phrase for the private key
--proxy-ssl-allow-beast Allow security flaw to improve interop
--proxy-sslv2 Use SSLv2
--proxy-sslv3 Use SSLv3
--proxy-tlsv1 Use TLSv1
--proxy-tlsuser USER TLS username
--proxy-tlspassword STRING TLS password
--proxy-tlsauthtype STRING TLS authentication type (default SRP)
All --proxy-foo options are independent from their --foo counterparts,
except --proxy-crlfile which defaults to --crlfile and --proxy-capath
which defaults to --capath.
Curl now also supports %{proxy_ssl_verify_result} --write-out variable,
similar to the existing %{ssl_verify_result} variable.
Supported backends: OpenSSL, GnuTLS, and NSS.
* A SOCKS proxy + HTTP/HTTPS proxy combination:
If both --socks* and --proxy options are given, Curl first connects to
the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS
proxy.
TODO: Update documentation for the new APIs and --proxy-* options.
Look for "Added in 7.XXX" marks.
As they are after all part of the public API. Saves space and reduces
complexity. Remove the strcase defines from the curlx_ family.
Suggested-by: Dan Fandrich
Idea: https://curl.haxx.se/mail/lib-2016-10/0136.html
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
After a few wasted hours hunting down the reason for slowness during a
TLS handshake that turned out to be because of TCP_NODELAY not being
set, I think we have enough motivation to toggle the default for this
option. We now enable TCP_NODELAY by default and allow applications to
switch it off.
This also makes --tcp-nodelay unnecessary, but --no-tcp-nodelay can be
used to disable it.
Thanks-to: Tim Rühsen
Bug: https://curl.haxx.se/mail/lib-2016-06/0143.html
- Move the existing scheme check from tool_operate.
In the case of --remote-header-name we want to parse Content-disposition
for a filename, but only if the scheme is http or https. A recent
adjustment 0dc4d8e was made to account for schemeless URLs however it's
not 100% accurate. To remedy that I've moved the scheme check to the
header callback, since at that point the library has already determined
the scheme.
Bug: https://github.com/curl/curl/issues/760
Reported-by: Kai Noda
It does open up a miniscule risk that one of the other protocols that
libcurl could use would send back a Content-Disposition header and then
curl would act on it even if not HTTP.
A future mitigation for this risk would be to allow the callback to ask
libcurl which protocol is being used.
Verified with test 1312
Closes#760
The underlying libcurl option used for this feature is
CURLOPT_FTP_CREATE_MISSING_DIRS which has the ability to retry the dir
creation, but it was never set to do that by the command line tool.
Now it does.
Bug: https://curl.haxx.se/mail/archive-2016-04/0021.html
Reported-by: John Wanghui
Help-by: Leif W
As these two options provide identical functionality, the former for
SOCK5 proxies and the latter for HTTP proxies, merged the two options
together.
As such CURLOPT_SOCKS5_GSSAPI_SERVICE is marked as deprecated as of
7.49.0.
- Add tests.
- Add an example to CURLOPT_TFTP_NO_OPTIONS.3.
- Add --tftp-no-options to expose CURLOPT_TFTP_NO_OPTIONS.
Bug: https://github.com/curl/curl/issues/481
- Add unit test 1604 to test the sanitize_file_name function.
- Use -DCURL_STATICLIB when building libcurltool for unit testing.
- Better detection of reserved DOS device names.
- New flags to modify sanitize behavior:
SANITIZE_ALLOW_COLONS: Allow colons
SANITIZE_ALLOW_PATH: Allow path separators and colons
SANITIZE_ALLOW_RESERVED: Allow reserved device names
SANITIZE_ALLOW_TRUNCATE: Allow truncating a long filename
- Restore sanitization of banned characters from user-specified outfile.
Prior to this commit sanitization of a user-specified outfile was
temporarily disabled in 2b6dadc because there was no way to allow path
separators and colons through while replacing other banned characters.
Now in such a case we call the sanitize function with
SANITIZE_ALLOW_PATH which allows path separators and colons to pass
through.
Closes https://github.com/curl/curl/issues/624
Reported-by: Octavio Schroeder
Due to path separators being incorrectly sanitized in --output
pathnames, eg -o c:\foo => c__foo
This is a partial revert of 3017d8a until I write a proper fix. The
remote-name will continue to be sanitized, but if the user specified an
--output with string replacement (#1, #2, etc) that data is unsanitized
until I finish a fix.
Bug: https://github.com/bagder/curl/issues/624
Reported-by: Octavio Schroeder
curl does not sanitize colons in a remote file name that is used as the
local file name. This may lead to a vulnerability on systems where the
colon is a special path character. Currently Windows/DOS is the only OS
where this vulnerability applies.
CVE-2016-0754
Bug: http://curl.haxx.se/docs/adv_20160127B.html
