Modify configure.ac to test for new CyaSSL Init function and remove
default install path to system. Change to CyaSSL OpenSSL header and
proper Init in code as well.
Note that this no longer detects or works with CyaSSL before v2
This new option tells curl to not work around a security flaw in the
SSL3 and TLS1.0 protocols. It uses the new libcurl option
CURLOPT_SSL_OPTIONS with the CURLSSLOPT_ALLOW_BEAST bit set.
Allow an appliction to set libcurl specific SSL options. The first and
only options supported right now is CURLSSLOPT_ALLOW_BEAST.
It will make libcurl to disable any work-arounds the underlying SSL
library may have to address a known security flaw in the SSL3 and TLS1.0
protocol versions.
This is a reaction to us unconditionally removing that behavior after
this security advisory:
http://curl.haxx.se/docs/adv_20120124B.html
... it did however cause a lot of programs to fail because of old
servers not liking this work-around. Now programs can opt to decrease
the security in order to interoperate with old servers better.
Use the new library CURLOPT_TCP_KEEPALIVE rather than disabling this via
the sockopt callback. If --keepalive-time is used, apply the value to
CURLOPT_TCP_KEEPIDLE and CURLOPT_TCP_KEEPINTVL.
This adds three new options to control the behavior of TCP keepalives:
- CURLOPT_TCP_KEEPALIVE: enable/disable probes
- CURLOPT_TCP_KEEPIDLE: idle time before sending first probe
- CURLOPT_TCP_KEEPINTVL: delay between successive probes
While not all operating systems support the TCP_KEEPIDLE and
TCP_KEEPINTVL knobs, the library will still allow these options to be
set by clients, silently ignoring the values.
As is pointed out in this bug report, there can indeed be situation
where --stderr has a point even when the "real" stderr can be
redirected. Remove the superfluous and wrong comment.
bug: http://curl.haxx.se/bug/view.cgi?id=3476020
These examples show how to fetch a single message (RETR command) and how to
list all the messages in a given mailbox (LIST command), with authentication
via SSL.
They were both based on the https.c example.
The INTERNALS document suggested that compatibility should be
maintained with perl version 4, but this was untrue - scripts such as
chksource.pl and runtests.pl use perl5-isms.
1- Two new error codes are introduced.
CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of
FTP server connected.
CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts.
Neither of these errors are considered fatal and control connection
remains OK because it could just be a firewall blocking server to
connect to the client.
2- One new setopt option was introduced.
CURLOPT_ACCEPTTIMEOUT_MS
It sets the maximum amount of time FTP client is going to wait for a
server to connect. Internal default accept timeout is 60 seconds.
Parameters were underquoted, resulting in
warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Document the possibility of providing multiple values using the ":"
separator, and the fact that the default value will be ignored if the
option is used.
Do not try to resolve interfaces names via DNS by recognizing interface
names in a few ways. If the interface option argument has a prefix of
"if!" then treat the argument as only an interface. Similarly, if the
interface argument is the name of an interface (even if it does not have
an IP address assigned), treat it as an interface name. Finally, if the
interface argument is prefixed by "host!" treat it as a hostname that
must be resolved by /etc/hosts or DNS.
These changes allow a client using the multi interfaces to avoid
blocking on name resolution if the interface loses its IP address or
disappears.
If the option is set to 0, the default timeout will be used - which in
modern libcurl versions equals 300 seconds (== 5 minutes).
Bug: http://curl.haxx.se/mail/lib-2011-12/0051.html
Reported by: Vladimir Grishchenko
Adds a timer based off of CURLINFO_TOTAL_TIME that is used to perform
certain actions after a minimum amount of time has passed using the
progress function. As a consequence the curl handle is now also passed
into the progress function. Progress example now also includes an
example of how to retreive the TOTAL_TIME and print it out.
When the new socket is created for an active connection, it is now done
using the open socket callback.
Test case 596 was modified to run fine, although it hides the fact that
the close callback is still called too many times, as it also gets
called for closing sockets that were created with accept().
Experience has shown that the symbols-in-versions file is very useful to
applications that want to build with a wide range of libcurl versions.
It is however easy to get it wrong and the source gets a bit messy with
all the fixed numerical comparisions.
The point of this script is to provide an easy-to-use macro for libcurl-
using applications to do preprocessor checks for specific libcurl
defines, and yet make the code clearly show what the macro is used for.
Added pop3 username and password example as well as an explanation of
how path part of the URL is used under pop3.
Additionally have corrected a couple of typos.
Don't even declare the struct members for disabled features
Introducing the CURLSHE_NOT_BUILT_IN return code for the share interface
when trying to set a sharing option that has been disabled (or not
enabled) in the library.
Slight rewording of the CURLOPT_URL SMTP sub-section.
Corrected the incorrect use of hyphens on the three uses of
"zero-terminated" with "zero terminated" to match the rest of the
document.
Corrected the use of an out of place hyphen in CURLOPT_NOPROXY section.
Allow (*curl_write_callback) write callbacks to return
CURL_WRITEFUNC_OUT_OF_MEMORY to properly indicate libcurl of OOM conditions
inside the callback itself.
If a socket is larger than FD_SETSIZE, avoid using FD_SET() on the
platforms where this is possible.
Bug: http://curl.haxx.se/bug/view.cgi?id=3413274
Reported by: Tim Starling
Zero-copy and "Avoid having to remove/readd handles" are not really
features we think are worthwhile to add. Removed.
SRP features have been added already, removed.
11.9 IPv6 addresses with globbing added
Trimmed the newlines to be LF-only. Converted the source to plain C, to
use curl style indents, to compile warning-free with picky options and
fixed the minor fprintf() bug on line 245. Added to makefile.
Drop the pre-release part from this text as we don't use that in
practise since many years.
Update the phrasing to reflect our more strict interpretation:
http://curl.haxx.se/mail/lib-2011-08/0064.html
Using 'socks5h' as proxy protocol will make it a
CURLPROXY_SOCKS5_HOSTNAME proxy which is SOCKS5 and asking the proxy to
resolve host names. I found no "standard" protocol name for this.
Follow style of GNU layout (cp, mv ...) where options are separated with
comma: -o, --option
Order item alphabetically (by length also): -o, -O, --option
Follow style of GNU layout by moving help related options to the end:
--help, -M, --version
Clarify that the '-', '.', '_' or '~' letters are also not escaped since
they shouldn't according to RFC3986 section 2.3.
This is how this function has behaved since sep 2010, commit
5df13c3173.
As it is already included by curlbuild.h if it exists on the platform it
was included here superfluously anyway.
Reported by: Dagobert Michelsen
Bug: http://curl.haxx.se/bug/view.cgi?id=3294509
Improved library search by check_function_exists_concat() macro:
it does not revert the list of libraries any more.
Improved OpenSSL library search: first find zlib, then search for
openssl libraries that may depend on zlib.
For Unix: openssl libraries can now be detected in nonstandard
locations. Supply CMAKE_LIBRARY_PATH to CMake on command line.
Added installation capability (very basic one yet).
Added CURLOPT_TRANSFER_ENCODING as the option to set to request Transfer
Encoding in HTTP requests (if built zlib enabled). I also renamed
CURLOPT_ENCODING to CURLOPT_ACCEPT_ENCODING (while keeping the old name
around) to reduce the confusion when we have to encoding options for
HTTP.
--tr-encoding is now the new command line option for curl to request
this, and thus I updated the test cases accordingly.
Stop the abuse of CURLE_FAILED_INIT as return code for things not being
init related by introducing two new return codes:
CURLE_NOT_BUILT_IN and CURLE_UNKNOWN_OPTION
CURLE_NOT_BUILT_IN replaces return code 4 that has been obsoleted for
several years. It is used for returning error when something is
attempted to be used but the feature/option was not enabled or
explictitly disabled at build-time. Getting this error mostly means that
libcurl needs to be rebuilt.
CURLE_FAILED_INIT is now saved and used strictly for init
failures. Getting this problem means something went seriously wrong,
like a resource shortage or similar.
CURLE_UNKNOWN_OPTION is the option formerly known as
CURLE_UNKNOWN_TELNET_OPTION (and the old name is still present,
separately defined to be removed in a very distant future). This error
code is meant to be used to return when an option is given to libcurl
that isn't known. This problem would mostly indicate a problem in the
program that uses libcurl.
The read callback must return the exact requested amount of data when it
is used for doing TFTP uploads. This is due to how it deals with data
internally. This could/should be fixed but for now we document the
existing behavior.
Reported by: Colin Blair
Bug: http://curl.haxx.se/mail/lib-2011-03/0319.html
This is a new documentation for the source tree. This information has
been present since a long time at
http://curl.haxx.se/mail/etiquette.html but now it is put into a plain
text version too for wider distribution. The web version will be
automatically generated from this source document.
When NSS-powered libcurl connected to a SSL server with
CURLOPT_SSL_VERIFYPEER equal to zero, NSS remembered that the peer
certificate was accepted by libcurl and did not ask the second time when
connecting to the same server with CURLOPT_SSL_VERIFYPEER equal to one.
This patch turns off the SSL session cache for the particular SSL socket
if peer verification is disabled. In order to avoid any performance
impact, the peer verification is completely skipped in that case, which
makes it even faster than before.
Bug: https://bugzilla.redhat.com/678580
All C and H files now (should) feature the proper project curl source
code header, which includes basic info, a copyright statement and some
basic disclaimers.
Stress that it is for client certificates and then mention that it also
works for all other SSL-based protocols apart from HTTPS and
FTPS. Namely POP3S, IMAPS and SMTPS for now.
This enables people to specify a path to the netrc file to use.
The new option override --netrc if both are present. However it
does follow --netrc-optional if specified.
On second thought, I think CURLE_TLSAUTH_FAILED should be eliminated. It
was only being raised when an internal error occurred while allocating
or setting the GnuTLS SRP client credentials struct. For TLS
authentication failures, the general CURLE_SSL_CONNECT_ERROR seems
appropriate; its error string already includes "passwords" as a possible
cause. Having a separate TLS auth error code might also cause people to
think that a TLS auth failure means the wrong username or password was
entered, when it could also be a sign of a man-in-the-middle attack.
"6.7 What are my obligations when using libcurl in my commercial apps?"
got the piece about what exactly "in all copies" mean to a user of the
code.
This interpretation is based on what other MIT-like licenses have made
more explicit.
Extended the intial HTTP protcol part and added a mention of --trace and
--trace-ascii.
Replaced most URLs in the text to use example.com instead of all the
made up strange names.
Shortened a bunch of lines.
... and update the curl.1 and curl_easy_setopt.3 man pages such that
they do not suggest to use an OpenSSL utility if curl is not built
against OpenSSL.
Bug: https://bugzilla.redhat.com/669702
Add a simple SMTP example program, patterned after some of the existing
examples, and the curl application.
This version addresses issues raised by David Woodhouse on comments in
the simplesmtp.c example.
This script is the start of a helper tool that scans a source code and
outputs the most recent libcurl version it finds symbols for. Meaning
that if there's no conditions in the code, that's the earliest libcurl
version the scanned code requires.
It is not added to the Makefile.am yet as it is still a bit crude, but
I'm committing it to keep it and allow us to work on it.
This is a meta symbol. OR this value together with a single specific
auth value to force libcurl to probe for un-restricted auth and if not,
only that single auth algorithm is acceptable.
For example you can use CURLAUTH_DIGEST|CURLAUTH_ONLY to make libcurl
first probe for what method to use, but yet only consider Digest to be
acceptable.
Using _only_ CURLAUTH_DIGEST without the CURLAUTH_ONLY field, will make
libcurl explicitly use Digest right away and not do any probing.
An example application source code sending SMTP mail with the multi
interface. It is based on the code Alona Rossen provided, which in turn
is based on existing example/test code, and I converted it even more
into a decent example with a fair multi API use, put the info required
to edit at the top and I added some comments.
I've developed a script I call symbol-scan.pl that scans the curl.h and
multi.h header files and compare the symbols it finds in there with the
symbols symbols-in-versions documents and outputs a report on the
differences. Using this I've dug through the history to fill up
symbols-in-versions with all the symbols my script found mismatches for.
I will commit symbol-scan.pl separatly and think of a way to put it to
use in the build/tests so that we from now on will get this in-sync
check automatically.
The invocation of autoconf's AC_PATH_PROG( ) is not quite right for
finding curl-config. This fix corrects the negative case (where
curl-config is not found).
The macro provides a --with-libcurl option that expects a PREFIX to be
specified and not actually a "directory" in which libcurl will be found.
This now spells that out more clearly.
Reported by: Dan Locks
Bug: http://curl.haxx.se/bug/view.cgi?id=3079891
all multi and hiper examples:
* don't loop curl_multi_perform calls, that was <7.20.0 style, currently
the exported multi functions will not return CURLM_CALL_MULTI_PERFORM
all hiper examples:
* renamed check_run_count to check_multi_info
* don't compare current running handle count with previous value, this
was the wrong way to check for finished requests, simply call
curl_multi_info_read
* it's also safe to call curl_multi_remove_handle inside the
curl_multi_info_read loop.
ghiper.c:
* replaced curl_multi_socket (that function is marked as obsolete) calls
with curl_multi_socket_action calls (as in hiperfifo.c and
evhiperfifo.c)
ghiper.c and evhiperfifo.c:
* be smart as hiperfifo.c, don't do uncessary curl_multi_* calls in
new_conn and main
curl_easy_duphandle() was not properly duping the ares channel. The
ares_dup() function was introduced in c-ares 1.6.0 so by starting to use
this function we also raise the bar and require c-ares >= 1.6.0
(released Dec 9, 2008) for such builds.
Reported by: Ning Dong
Bug: http://curl.haxx.se/mail/lib-2010-08/0318.html
1. Remove the comment warning that it's "not been verified to work". It
works with no problems in my testing.
2. Remove 2 unnecessary includes.
3. Remove the myrealloc(). Initialize chunk.memory with malloc() instead
of NULL. The comments for these two parts contradicted each other.
4. Handle out of memory from realloc() instead of continuing.
5. Print a brief status message at the end.
The numerical value passed to CURLOPT_RESUME_FROM for FTP uploads is
interpreted and used as position where to resume the _reading_ of the
local file and it will "blindly" append that data on the remote
file. This was certainly not clear in the docs previously.
Reported by: catalin
Bug: http://curl.haxx.se/bug/view.cgi?id=3048174
Curl_expire() is now expanded to hold a list of timeouts for each easy
handle. Only the closest in time will be the one used as the primary
timeout for the handle and will be used for the splay tree (which sorts
and lists all handles within the multi handle).
When the main timeout has triggered/expired, the next timeout in time
that is kept in the list will be moved to the main timeout position and
used as the key to splay with. This way, all timeouts that are set with
Curl_expire() internally will end up as a proper timeout. Previously any
Curl_expire() that set a _later_ timeout than what was already set was
just silently ignored and thus missed.
Setting Curl_expire() with timeout 0 (zero) will cancel all previously
added timeouts.
Corrects known bug #62.
In some places where the name 'stream' has been used for naming a
function argument that is in fact settable with a setopt() option we now
call that argument 'userdata' to make it more obvious that it is in fact
possible to set by the application.
Suggested by: Jeff Pohlmeyer
The SOCKET type in Win64 is 64 bits large (and thus so is curl_socket_t
on that platform), and long is only 32 bits. It makes it impossible for
curl_easy_getinfo() to return a socket properly with the
CURLINFO_LASTSOCKET option as for all other operating systems.
