moparisthebest/curl
1
0
Fork 0
mirror of https://github.com/moparisthebest/curl synced 2024-11-17 23:15:08 -05:00
Code Issues Releases Wiki Activity
14,351 Commits 10 Branches 144 Tags 113 MiB
84221006c9
Commit Graph

420 Commits

Author SHA1 Message Date
Yang Tse
3fdced357b - Remove QD restarting of https servers. Proper fixing required. 
This will make tests 310 311 and 312 fail while fixing.

- Remove some debug messages
 2010-01-18 02:53:25 +00:00
Yang Tse
ce2ac665e4 make verifyhttp use different file names depending on server characteristics 2010-01-18 02:36:39 +00:00
Yang Tse
7f8980114b fix warnings 2010-01-17 20:28:07 +00:00
Yang Tse
312494f25f fix warnings 2010-01-17 14:47:30 +00:00
Yang Tse
8d97b33347 fix warnings 2010-01-17 14:31:13 +00:00
Yang Tse
b51b703a5b add some debug messages 2010-01-17 13:33:27 +00:00
Yang Tse
071c38988d use servername_id() from serverhelp.pm 2010-01-17 02:50:48 +00:00
Yang Tse
365e75a270 refactored stopping of test harness servers 2010-01-17 02:45:24 +00:00
Yang Tse
32413a8e34 Declaration of $sshdlog is done in sshhelp.pm 2010-01-15 20:14:37 +00:00
Yang Tse
ada2774ab2 Start using the centralized pidfile and logfile name generation 
subroutines for ssh and socks test suite servers.
 2010-01-15 18:55:01 +00:00
Yang Tse
7624527591 Squeeze slack time when killing more than one server from 
the <killserver> section of test harness definition files.
 2010-01-14 17:36:57 +00:00
Yang Tse
7525670610 Make runtests.pl actually support any (valid) server specification 
for the <killserver> section of test harness definition files.
 2010-01-12 22:22:55 +00:00
Yang Tse
3fd67b5f36 Adjust vor VPATH builds 2010-01-12 03:01:00 +00:00
Daniel Stenberg
78b7d7f7a8 - The tests/runtests.pl script now checks to see if the test case that runs is 
present in the tests/data/Makefile.am and outputs a notice message on the
  screen if not. Each test file has to be included in that Makefile.am to get
  included in release archives and forgetting to add files there is a common
  mistake. This is an attempt to make it harder to forget.
 2010-01-11 15:50:30 +00:00
Yang Tse
cd7b12edff secureserver.pl is now the test harness script used for SSL/TLS. 
Start using the centralized pidfile and logfile name generation
subroutines for https and ftps test suite servers.
 2010-01-11 04:49:13 +00:00
Yang Tse
aae97c998a Previous commit adjustments 2010-01-10 02:41:44 +00:00
Yang Tse
017c14cc99 Start using the centralized pidfile and logfile name generation 
subroutines for ftp, pop3, imap and smtp test suite servers.
 2010-01-09 18:35:59 +00:00
Yang Tse
aa2f447400 Start using the centralized pidfile and logfile name generation 
subroutines for http and tftp test suite servers.
 2010-01-08 15:54:07 +00:00
Yang Tse
a114b7b1c0 sws and tftpd command line option naming adjustments 2010-01-08 01:48:54 +00:00
Yang Tse
c796f2646e Leftover from previous commit 2009-12-28 20:10:00 +00:00
Yang Tse
d0f6bde732 Initial refactoring step for server name strings centralized generation 2009-12-28 20:00:41 +00:00
Daniel Stenberg
73ad32e125 When verifying the SMTP server I had to add some hackery since SMTP in itself 
doesn't really return any body data to check so I made SMTP check "headers"
as well.
 2009-12-25 22:21:46 +00:00
Yang Tse
c74875d94e Back out some pingpong server stopping changes introduced last week in 
order to re-use 'classic' stopping and allow taking test-suite run time
references from this state.
 2009-12-23 15:20:20 +00:00
Yang Tse
271dc9c582 use Time::HiRes whenever available, independently of perl version 2009-12-22 13:46:06 +00:00
Yang Tse
96395a908a Make 'classic' output end of a test-suite run become again the end 
of output, even when run time statistics are shown.
 2009-12-21 15:50:24 +00:00
Yang Tse
e9a993b9e9 Move stopping of servers instructed by test definition, after the removal of 
server logs advisor read lock and before test results verifications are done.

When stopping a pingpong server, stop server before its slaves.
 2009-12-21 14:53:07 +00:00
Yang Tse
76b3c9d70f Replaced tabs with spaces 2009-12-21 02:37:23 +00:00
Daniel Stenberg
88a0060b2e revert that, we already had a function named like that! 2009-12-20 22:08:06 +00:00
Daniel Stenberg
4adf7d62d4 rename the verifyftp function to verifyserver since it is used to verify 
a wide variety of protocol servers
 2009-12-20 22:00:23 +00:00
Yang Tse
f912f8d5d2 - Attempt to fix script compilation failure on versions older than 5.007003, 
corelist -a Time::HiRes lists this as the first version released with it.

- Ensure ftp check delay timer is always an integral number.
 2009-12-20 03:48:32 +00:00
Daniel Stenberg
344bbcf259 fix the ftp check delay timer to never be set below 1 to work correctly 
in cases like test 190
 2009-12-19 23:10:33 +00:00
Yang Tse
010fe5acd5 Slack time reduction 2009-12-19 13:20:07 +00:00
Yang Tse
aeec8e0b38 Added runtests.pl '-r' option for run time statistics 2009-12-19 04:15:22 +00:00
Yang Tse
2d15ac3d4e server start and verification time as well as test preparation time 
data is required in order to closer match total test execution time.
 2009-12-18 19:17:14 +00:00
Yang Tse
53deae3781 Added test harness simple time execution stats 2009-12-18 15:23:18 +00:00
Yang Tse
002ed5f298 Test harness process control enhancements 2009-12-16 19:55:35 +00:00
Yang Tse
3802d027cd Test harness process control enhancements 2009-12-16 15:16:06 +00:00
Yang Tse
a6abbb120e Adjust uppercase protocol string usage 2009-12-14 14:42:48 +00:00
Daniel Stenberg
ec3bb8f727 introducing IMAP, POP3 and SMTP support (still lots of polish left to do) 2009-12-12 21:54:01 +00:00
Yang Tse
a72ce23f16 - In order to better reflect that the returned pid is extracted from the 
given file, serverpid sub is renamed to pidfromfile. In addition it is
  enhanced to make sure that it always returns zero unless a numerical
  positive value is returned.

- To better reflect that only process existance is actually checked,
  checkserver sub is renamed to processexists. In addition it is enhanced
  making it remove the given pid file when the extracted pid is no longer
  alive.
 2009-11-30 13:48:51 +00:00
Daniel Stenberg
e73fe837a8 - Peter Sylvester made the HTTPS test server use specific certificates for 
each test, so that the test suite can now be used to actually test the
  verification of cert names etc. This made an error show up in the OpenSSL-
  specific code where it would attempt to match the CN field even if a
  subjectAltName exists that doesn't match. This is now fixed and verified
  in test 311.
 2009-08-11 21:48:58 +00:00
Gunter Knauf
f671d0513c renamed generated config.h to curl_config.h in order to avoid clashes when libcurl is used with other projects which also have a config.h. 2009-07-14 13:25:14 +00:00
Yang Tse
2c16681225 Adjusted to take in account that... 
With the curl memory tracking feature decoupled from the debug build feature,
CURLDEBUG and DEBUGBUILD preprocessor symbol definitions are used as follows:

CURLDEBUG used for curl debug memory tracking specific code (--enable-curldebug)

DEBUGBUILD used for debug enabled specific code (--enable-debug)
 2009-06-10 02:49:42 +00:00
Yang Tse
b8e73495a5 Extend displaying of logfiles upon first server start-up failure for http, https, ftp, ftps and tftp test harness servers. 2009-05-15 11:59:24 +00:00
Yang Tse
187cfc1594 Displaying of logfiles on ftp server satrtup failure for test case #100 becomes standard. 2009-05-15 11:14:03 +00:00
Yang Tse
86f043a66c temporary debug trace for ftp server satrtup failure on testcase #100 2009-05-12 19:18:54 +00:00
Yang Tse
36b397be9f Fetch curl's 'CharConv' feature information, used by TPF. 2009-05-11 17:20:41 +00:00
Daniel Stenberg
1f340a262f support --help to do the same as -h 2009-05-11 11:39:42 +00:00
Yang Tse
75585f771a Fix name of tool shown upon error. 2009-05-11 01:16:28 +00:00
Daniel Stenberg
d1ba4324de introduce VCURL for verify calls, so that it can be changed to use a different 
binary than the one that gets tested, if need be
 2009-05-10 21:20:15 +00:00
Yang Tse
9ef7b6afe2 Remove temporary and HP-UX autobuild specific change to debug SSH server start-up failures 2009-05-08 02:18:49 +00:00
Yang Tse
7c6e0d5981 Temporary and HP-UX autobuild specific change to debug SSH server start-up failures 2009-05-06 10:32:06 +00:00
Yang Tse
a840cc700a Revert change committed on Mon May 4 09:30:23 2009 UTC. 
The origin of the problem with test case #251 was the --ftp-port not being the CLIENTIP address.
 2009-05-05 08:46:31 +00:00
Yang Tse
ff3e574187 David McCreedy's patch to fix test suite harness to allow test FTP server and client on different machines, providing FTP client address when running the FTP test server. 2009-05-04 10:30:23 +00:00
Yang Tse
8aa88f4d36 re-enable all tests for all icc autobuilds 2009-04-17 07:30:56 +00:00
Daniel Stenberg
4741e64c89 Josef Wolf's extension that allows a $TESTDIR/gdbinit$testnum file that when 
you use runtests.pl -g, will be sourced by gdb to allow additional fancy
or whatever you see fit
 2008-11-19 21:56:11 +00:00
Dan Fandrich
cdd6054e08 Display the time in verbose mode during the torture tests to help determine 
when the tests stall.
 2008-11-17 20:24:13 +00:00
Yang Tse
9230708e47 don't skip tests 558 and 559 on i686 icc autobuilds 2008-10-27 20:09:35 +00:00
Yang Tse
6db8f53445 test #558 verifies loop operation using malloc() and free() 2008-10-26 03:03:29 +00:00
Yang Tse
81e48ada47 For i686 icc autobuilds: 
Re-enable all tests for debug-enabled builds.

  For debug-disabled builds only 8 tests are enabled.
 2008-10-22 15:03:15 +00:00
Dan Fandrich
357383159e A <precheck> command is considered to have failed if it returns a non-zero 
return code.  This way, if the precheck command can't be run at all for
whatever reason, it's treated as a precheck failure which causes the
test to be skipped.
 2008-10-15 17:41:02 +00:00
Yang Tse
a632f6d5b1 if a test execution is aborted due to a signal, and the process 
returns no other exitcode, use 2000 + signal number as return code
 2008-09-26 18:56:56 +00:00
Yang Tse
42271ad463 use shift right. Division result is not integral. 2008-09-26 14:08:33 +00:00
Yang Tse
82107a02f5 Re-enable test #100 on i686 icc autobuilds 2008-09-24 01:29:23 +00:00
Yang Tse
1e076a4ae0 Re-enable tests #1 on i686 icc autobuilds 2008-09-22 18:55:42 +00:00
Yang Tse
eae27d1788 Disable all tests on i686 icc autobuilds to inspect build messages 2008-09-08 16:50:04 +00:00
Yang Tse
d744c85310 Re-enable all tests on x86_64 and ia64. 2008-08-24 23:26:07 +00:00
Yang Tse
71d3c5bf41 Disable all tests except #557 on x86_64 and ia64 to debug trace curl_mprintf() on these systems. 2008-08-24 15:57:52 +00:00
Daniel Stenberg
a604682805 Andy Tsouladze's fix to kill the knowledge of servers properly after they have 
been killed.
 2008-08-23 11:25:14 +00:00
Daniel Stenberg
14a5596346 - Andy Tsouladze fixed runtests.pl to not attempt to execute the stunnel 
_directory_ if that happened to appear in the path!
 2008-08-12 07:21:39 +00:00
Dan Fandrich
b6b03c8ab9 Added feature in runtests.pl to select tests based on key word. 2008-07-27 02:34:27 +00:00
Dan Fandrich
932b589780 Changed the long logfile elision code in runtests.pl to properly handle 
lines ending in \r.
 2008-07-24 02:16:48 +00:00
Dan Fandrich
70d834c512 Always use $LOGDIR when referring to the log directory. 2008-06-19 01:12:02 +00:00
Daniel Stenberg
2d0fea2650 fixed the language somewhat 2008-06-13 20:45:34 +00:00
Daniel Stenberg
5abfdc0140 - curl the tool now deals with its command line options somewhat differently! 
All boolean options (such as -O, -I, -v etc), both short and long versions,
  now always switch on/enable the option named. Using the same option multiple
  times thus make no difference. To switch off one of those options, you need
  to use the long version of the option and type --no-OPTION. Like to disable
  verbose mode you use --no-verbose!

- Added --remote-name-all to curl, which if used changes the default for all
  given URLs to be dealt with as if -O is used. So if you want to disable that
  for a specific URL after --remote-name-all has been used, you muse use -o -
  or --no-remote-name.
 2008-06-08 20:53:49 +00:00
Daniel Stenberg
7b2531da24 do variable replacement in the stdout data read from the test case 2008-05-01 10:51:16 +00:00
Yang Tse
113d0937de Add 'timeout' and 'delay' attributes support for the test harness <command> subsection 2008-04-25 04:19:50 +00:00
Yang Tse
96edebf4d9 improve synchronization between test harness runtests.pl script 
and test harness servers to minimize risk of false test failures.

http://curl.haxx.se/mail/lib-2008-04/0392.html
 2008-04-23 23:55:34 +00:00
Dan Fandrich
768e3e796e Ignore the result of the postcheck command in torture mode 2008-04-21 17:19:44 +00:00
Dan Fandrich
80cec5a62a Fixed the test harness so it will write out zero-length data files. 2008-03-06 01:11:43 +00:00
Daniel Stenberg
2c80bcbc81 made the non-matching error code output nicer since we know it is a number 
and the string contains a newline...
 2008-02-20 12:14:31 +00:00
Yang Tse
cf9259dd92 verifyserver() actually returns the pid of the unsecure http and ftp servers 
when verifying the https and ftps servers
 2008-02-13 06:06:57 +00:00
Yang Tse
6634e3c3a3 On heavily loaded systems any test server start up can take longer than the 
timeout passed to startnew, when this happens startnew completes without being
able to read the pidfile and consequently returns a zero pid2.

To fix the above posibility the server pid is recovered from the verification
stage which will actually return the server pid when verification is valid.
 2008-02-12 13:47:56 +00:00
Dan Fandrich
75c369dcca Disable test due to keyword before disabling due to bad server. 2008-02-11 20:10:36 +00:00
Yang Tse
6942d313ff Verify only once test harness sftp server connectivity and functionality. 
Make sure that the sftp client tool uses the ssh client binary that we have
used to generate the configuration files, otherwise sftp might be using one
located in the preferred path compiled into sftp.
 2008-02-10 02:52:17 +00:00
Yang Tse
1a340de0e5 To verify that the sftp server is actually running, responsive and that 
all curl's tests generated configuration and key files are fine, a real
connection is established to the test harness sftp server authenticating
and running a simple sftp remote pwd command.

The verification is done using OpenSSH's or SunSSH's sftp client tool with
a configuration file with the same options as the test harness socks server
with the exception that dynamic forwarding is not used for sftp.
 2008-02-08 13:54:02 +00:00
Yang Tse
01d95b56a0 fix failure to properly detect SSH and SOCKS servers start up on loaded systems 2008-01-18 09:18:59 +00:00
Daniel Stenberg
6893fcaa9b remove trailing comma too, even though I don't think it does any harm 2008-01-16 22:09:51 +00:00
Daniel Stenberg
301ae1ae1b Nathan Coulter's patch that makes runtests.pl respect the PATH when figuring 
out what valgrind to run.
 2008-01-16 22:08:37 +00:00
Yang Tse
69f685056d startnew() shouldn't return a positive pid as reported in the pidfile 
by the spawned server itself unless it is actually alive
 2008-01-14 19:28:54 +00:00
Yang Tse
2b63eb8511 Ooops 2008-01-12 00:12:16 +00:00
Yang Tse
f09fe4b49f Ooops 2008-01-11 21:59:05 +00:00
Yang Tse
35be09cf58 When verifying that test harness's SSH and SOCKS servers have been 
started check also that the process is actually alive, since they
could have died once the pidfile was written out
 2008-01-11 20:17:33 +00:00
Yang Tse
14ff7e75e0 Temporary change to help debugging SSH server verification failures 2008-01-10 16:19:14 +00:00
Yang Tse
32cc75d6cb Partially cleanup debugging messages in test harness, introduced for 
new minimum SSH version support for SCP, SFTP and SOCKS tests.

Some verbosity which still remains, will go out before next release.
 2008-01-08 20:12:43 +00:00
Yang Tse
2408b236ca Display ssh server log and configuration upon socks server failure 2008-01-08 00:39:31 +00:00
Daniel Stenberg
fe0d7aee49 Daniel Egger provided 'nonewline=yes' support for the <stdout> section 2008-01-04 23:31:04 +00:00
Yang Tse
a4945fe687 Missing newline at end of message 2008-01-04 19:56:56 +00:00
Yang Tse
7a2177dc42 - Display curl_ssh_config when socks server fails to start. 
- Capability of running socks5 tests must be based on ssh daemon version
  and not on ssh client version.
 2008-01-04 13:00:40 +00:00
Yang Tse
bf6e2f28ba Make sure @INC is modified before 'using' the sshhelp module. 2008-01-04 03:05:33 +00:00