The FILE:// code doesn't support this option - and it doesn't make sense
to support it as long as it works as it does since then it'd only block
even longer.
But: setting CURLOPT_MAX_RECV_SPEED_LARGE would make the transfer first
get done and then libcurl would wait until the average speed would get
low enough. This happened because the transfer happens completely in the
DO state for FILE:// but then it would still unconditionally continue in
to the PERFORM state where the speed check is made.
Starting now, the code will skip from DO_DONE to DONE immediately if no
socket is set to be recv()ed or send()ed to.
Bug: http://curl.haxx.se/bug/view.cgi?id=1312
Reported-by: Mohammad AlSaleh
This is an extension to the fix in 7d80ed64e4. We may
call Curl_disconnect() while cleaning up the multi handle,
which could lead to openssl sending packets, which could get
a SIGPIPE.
Signed-off-by: Jeff King <peff@peff.net>
This patch fixes and issue introduced in commit 7d7df83198, if the
tunnel state was TUNNEL_CONNECT, waitconnect_getsock() would return a
bitmask indicating a readable socket but never stored the socket in the
return array.
This patch adds a 200ms delay between the first and second address
family socket connection attempts.
It also iterates over IP addresses in the order returned by the
system, meaning most dual-stack systems will try IPv6 first.
Additionally, it refactors the connect code, removing most code that
handled synchronous connects. Since all sockets are now non-blocking,
the logic can be made simpler.
The code rejected 0 as a valid timeout while in fact the function could
indeed legitimately return that and it should be respected.
Reported-by: Bjorn Stenberg
This patch invokes two socket connect()s nearly simultaneously, and
the socket that is first connected "wins" and is subsequently used for
the connection. The other is terminated.
There is a very slight IPv4 preference, in that if both sockets connect
simultaneously IPv4 is checked first and thus will win.
When waiting for a 100-continue response from the server, the
Curl_readwrite() will refuse to run if called until the timeout has been
reached.
We timeout code in multi_socket() allows code to run slightly before the
actual timeout time, so for test 154 it could lead to the function being
executed but refused in Curl_readwrite() and then the application would
just sit idling forever.
This was detected with runtests.pl -e on test 154.
Make sure we always return CURLM_CALL_MULTI_PERFORM when we reach
CURLM_STATE_DONE since the state is transient and it can very well
continue executing as there is nothing to wait for.
Bug: http://curl.haxx.se/mail/lib-2013-08/0211.html
Reported-by: Yi Huang
Doing curl_multi_add_handle() on an easy handle that is already added to
a multi handle now returns this error code. It previously returned
CURLM_BAD_EASY_HANDLE for this condition.
The closure_handle is "owned" by the multi handle and it is
unconditional so the setting up of it should be in the Curl_multi_handle
function rather than curl_multi_add_handle.
With everything being struct SessionHandle pointers now, this rename
makes multi.c use the library-wide practise of calling that pointer
'data' instead of the previously used 'easy'.
Moved Curl_easy_addmulti() from easy.c to multi.c, renamed it to
easy_addmulti and made it static.
Removed Curl_easy_initHandleData() and uses of it since it was emptied
in commit cdda92ab67b47d74a.
CURLOPT_DNS_USE_GLOBAL_CACHE broke in commit c43127414d (been
broken since the libcurl 7.29.0 release). While this option has been
documented as deprecated for almost a decade and nobody even reported
this bug, it should remain functional.
Added test case 1512 to verify
This is a regression as this logic used to work. It isn't clear when it
broke, but I'm assuming in 7.28.0 when we went all-multi internally.
This likely never worked with the multi interface. As the failed
connection is detected once the multi state has reached DO_MORE, the
Curl_do_more() function was now expanded somewhat so that the
ftp_do_more() function can request to go "back" to the previous state
when it makes another attempt - using PASV.
Added test case 1233 to verify this fix. It has the little issue that it
assumes no service is listening/accepting connections on port 1...
Reported-by: byte_bucket in the #curl IRC channel
The motivation for having a separate struct that keep track of an easy
handle when using the multi handle was removed when we switched to
always using the multi interface internally. Now they were just two
separate struct that was always allocated for each easy handle.
This first step just moves the Curl_one_easy struct members into the
SessionHandle struct and hides this somehow (== keeps the source code
changes to a minimum) by defining Curl_one_easy to SessionHandle
The biggest changes in this commit are:
1 - the linked list of easy handles had to be changed somewhat due
to the new struct layout. This made the main linked list pointer
get renamed to 'easyp' and there's also a new pointer to the last
node, called easylp. It is no longer circular but ends with ->next
pointing to NULL. New nodes are still added last.
2 - easy->state is now called easy->mstate to avoid name collision
Commit 6d30f8ebed didn't work properly. First, it used the wrong
array index, but this fix also:
1 - only does the copying if indeed there was any activity
2 - makes sure to properly translate between internal and external
bitfields, which are not guaranteed to match
Reported-by: Evgeny Turnaev
As a remedy to the problem when a socket gets closed and a new one is
opened with the same file descriptor number and as a result
multi.c:singlesocket() doesn't detect the difference, the new function
Curl_multi_closed() gets told when a socket is closed so that it can be
removed from the socket hash. When the old one has been removed, a new
socket should be detected fine by the singlesocket() on next invoke.
Bug: http://curl.haxx.se/bug/view.cgi?id=1248
Reported-by: Erik Johansson
Allow less room for "triggered too early" mistakes by applications /
timers on non-windows platforms. Starting now, we assume that a timeout
call is never made earlier than 3 milliseconds before the actual
timeout. This greatly improves timeout accuracy on Linux.
Bug: http://curl.haxx.se/bug/view.cgi?id=1228
Reported-by: Hang Su
commit 29bf0598aa introduced a problem when the "internal" timeout is
prefered to the given if shorter, as it didn't consider the case where
-1 was returned. Now the internal timeout is only considered if not -1.
Reported-by: Tor Arntsen
Bug: http://curl.haxx.se/mail/lib-2013-06/0015.html
If the multi handle's pending timeout is less than what is passed into
this function, it will now opt to use the shorter time anyway since it
is a very good hint that the handle wants to process something in a
shorter time than what otherwise would happen.
curl_multi_wait.3 was updated accordingly to clarify
This is the reason for bug #1224
Bug: http://curl.haxx.se/bug/view.cgi?id=1224
Reported-by: Andrii Moiseiev
By introducing an internal alternative to curl_multi_init() that accepts
parameters to set the hash sizes, easy handles will now use tiny socket
and connection hash tables since it will only ever add a single easy
handle to that multi handle.
This decreased the number mallocs in test 40 (which is a rather simple
and typical easy interface use case) from 1142 to 138. The maximum
amount of memory allocated used went down from 118969 to 78805.
Introducing a number of options to the multi interface that
allows for multiple pipelines to the same host, in order to
optimize the balance between the penalty for opening new
connections and the potential pipelining latency.
Two new options for limiting the number of connections:
CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections
to the same host. When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished, so we can reuse the connection.
CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total.
When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished. The free connection will then be reused, if possible, or
closed if the pending handle can't reuse it.
Several new options for pipelining:
CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a
pipeline is "full" when a connection is to be reused, a new connection
will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it.
If not, the handle will be put in a pending state until a connection is
ready (either free or a pipe got shorter).
CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a transfer with a content
length that is larger than this.
CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a chunk larger than this.
CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow
pipelining.
CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow
pipelining.
See the curl_multi_setopt() man page for details.
When Curl_do() returns failure, the connection pointer could be NULL so
the code path following needs to that that into account.
Bug: http://curl.haxx.se/mail/lib-2013-03/0062.html
Reported by: Eric Hu
Remove internal separated behavior of the easy vs multi intercace.
curl_easy_perform() is now using the multi interface itself.
Several minor multi interface quirks and bugs have been fixed in the
process.
Much help with debugging this has been provided by: Yang Tse
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
