The feature is only enabled if the output is believed to be a tty.
-J: There's some minor differences and improvements in -J handling, as
now J should work with -i and it actually creates a file first using the
initial name and then *renames* that to the one found in
Content-Disposition (if any).
-i: only shows headers for HTTP transfers now (as documented).
Previously it would also show for pieces of the transfer that were HTTP
(for example when doing FTP over a HTTP proxy).
-i: now shows trailers as well. Previously they were not shown at all.
--libcurl: the CURLOPT_HEADER is no longer set, as the header output is
now done in the header callback.
This extends the INDENTATION case to also handle 'else' statements
and require proper indentation on the following line. Also fixes the
offending cases found in the codebase.
Closes#2532
- Move verify_certificate functionality in schannel.c into a new
file called schannel_verify.c. Additionally, some structure defintions
from schannel.c have been moved to schannel.h to allow them to be
used in schannel_verify.c.
- Make verify_certificate functionality for Schannel available on
all versions of Windows instead of just Windows CE. verify_certificate
will be invoked on Windows CE or when the user specifies
CURLOPT_CAINFO and CURLOPT_SSL_VERIFYPEER.
- In verify_certificate, create a custom certificate chain engine that
exclusively trusts the certificate store backed by the CURLOPT_CAINFO
file.
- doc updates of --cacert/CAINFO support for schannel
- Use CERT_NAME_SEARCH_ALL_NAMES_FLAG when invoking CertGetNameString
when available. This implements a TODO in schannel.c to improve
handling of multiple SANs in a certificate. In particular, all SANs
will now be searched instead of just the first name.
- Update tool_operate.c to not search for the curl-ca-bundle.crt file
when using Schannel to maintain backward compatibility. Previously,
any curl-ca-bundle.crt file found in that search would have been
ignored by Schannel. But, with CAINFO support, the file found by
that search would have been used as the certificate store and
could cause issues for any users that have curl-ca-bundle.crt in
the search path.
- Update url.c to not set the build time CURL_CA_BUNDLE if the selected
SSL backend is Schannel. We allow setting CA location for schannel
only when explicitly specified by the user via CURLOPT_CAINFO /
--cacert.
- Add new test cases 3000 and 3001. These test cases check that the first
and last SAN, respectively, matches the connection hostname. New test
certificates have been added for these cases. For 3000, the certificate
prefix is Server-localhost-firstSAN and for 3001, the certificate
prefix is Server-localhost-secondSAN.
- Remove TODO 15.2 (Add support for custom server certificate
validation), this commit addresses it.
Closes https://github.com/curl/curl/pull/1325
When a zeroed out allocation is required, use calloc() rather than
malloc() followed by an explicit memset(). The result will be the
same, but using calloc() everywhere increases consistency in the
codebase and avoids the risk of subtle bugs when code is injected
between malloc and memset by accident.
Closes https://github.com/curl/curl/pull/2497
Only treat response code as FTP response codes in case the
protocol type is FTP.
This fixes an issue where an HTTP download was treated as FTP
in case libcurl returned with 33. This happens when the
download has already finished and the server responses 416:
HTTP/1.1 416 Requested Range Not Satisfiable
This should not be treated as an FTP error.
Fixes#2464Closes#2465
- In keeping with the naming of our other connect timeout options rename
CURLOPT_HAPPY_EYEBALLS_TIMEOUT to CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.
This change adds the _MS suffix since the option expects milliseconds.
This is more intuitive for our users since other connect timeout options
that expect milliseconds use _MS such as CURLOPT_TIMEOUT_MS,
CURLOPT_CONNECTTIMEOUT_MS, CURLOPT_ACCEPTTIMEOUT_MS.
The tool option already uses an -ms suffix, --happy-eyeballs-timeout-ms.
Follow-up to 2427d94 which added the lib and tool option yesterday.
Ref: https://github.com/curl/curl/pull/2260
- Add new option CURLOPT_HAPPY_EYEBALLS_TIMEOUT to set libcurl's happy
eyeball timeout value.
- Add new optval macro CURL_HET_DEFAULT to represent the default happy
eyeballs timeout value (currently 200 ms).
- Add new tool option --happy-eyeballs-timeout-ms to expose
CURLOPT_HAPPY_EYEBALLS_TIMEOUT. The -ms suffix is used because the
other -timeout options in the tool expect seconds not milliseconds.
Closes https://github.com/curl/curl/pull/2260
... since the libc provided one are locale dependent in a way we don't
want. Also, the "native" isalnum() (for example) works differently on
different platforms which caused test 1307 failures on macos only.
Closes#2269
djgpp do have 'mkdir(dir, mode)'. Other DOS-compilers does not
But djgpp seems the only choice for MSDOS anyway.
PellesC do have a 'F_OK' defined in it's <unistd.h>.
Update year in Copyright.
Get screen width from the environment variable COLUMNS first, if set. If
not, use ioctl(). If nether works, assume 79.
Closes#2242
The "refresh" is for the -# output when no total transfer size is
known. It will now only use a single updated line even for this case:
The "-=O=-" ship moves when data is transferred. The four flying
"hashes" move (on a sine wave) on each refresh, independent of data.
This reverts commit 9ffad8eb13.
It was actually added rather recently in 8e8afa82cb due to a crash
that would otherwise happen in the RTSP code. As I don't think we've
fixed that behavior yet, we better keep this work-around until we have
fixed it better.
These are OS/2-specific things added to the code in the year 2000. They
were always ugly. If there's any user left, they still don't need it
done this way.
Closes#2166
That data is only ever used by the CURLOPT_INTERLEAVEFUNCTION callback
and that option isn't set or used by the curl tool!
Updates the 9 tests that verify --libcurl
Closes#2167
Make it use a max 10Hz update frequency for this case as well. Return
early if the "point" hasn't moved since last invoke.
Reported-by: Elliot Saba
Fixes#2158Closes#2163
This uses the brotli external library (https://github.com/google/brotli).
Brotli becomes a feature: additional curl_version_info() bit and
structure fields are provided for it and CURLVERSION_NOW bumped.
Tests 314 and 315 check Brotli content unencoding with correct and
erroneous data.
Some tests are updated to accomodate with the now configuration dependent
parameters of the Accept-Encoding header.
By properly keeping track of the last entry in the list of URLs/uploads
to handle, curl now avoids many meaningless traverses of the list which
speeds up many-URL handling *MASSIVELY* (several magnitudes on 100K
URLs).
Added test 1291, to verify that it doesn't take ages - but we don't have
any detection of "too slow" command in the test suite.
Reported-by: arainchik on github
Fixes#1959Closes#2052
Do not generate line with the current date, such as:
* Generation time: Tue Oct-24 18:01:41 2017
This will improve reproducibility. The generated string is only
part of a comment, so there should be no adverse consequences.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
closes#2026
Also upgrade test 1133 to cover this case and clarify man page about
form data quoting.
Bug: https://github.com/curl/curl/issues/2022
Reported-By: omau on github
The config files define curl and libcurl targets as imported targets
CURL::curl and CURL::libcurl. For backward compatibility with CMake-
provided find-module the CURL_INCLUDE_DIRS and CURL_LIBRARIES are
also set.
Closes#1879
Allow to ovverride certain build tools, making it possible to
use LLVM/Clang to build curl. The default behavior is unchanged.
To build with clang (as offered by MSYS2), these settings can
be used:
CURL_CC=clang
CURL_AR=llvm-ar
CURL_RANLIB=llvm-ranlib
Closes https://github.com/curl/curl/pull/1993
If stdin is not a regular file, its content is memory-buffered to enable
a possible data "rewind".
In all cases, stdin data size is determined before real use to avoid
having an unknown part's size.
--libcurl generated code is left as an unbuffered stdin fread/fseek callback
part with unknown data size.
Buffering is not supported in deprecated curl_formadd() API.
When curl and libcurl are built with some protocols disabled, they stop
setting and receiving some options that don't make sense with those
protocols. In particular, when HTTP is disabled many options aren't set
that are used only by HTTP. However, some options that appear to be
HTTP-only are actually used by other protocols as well (some despite
having HTTP in the name) and should be set, but weren't. This change now
causes some of these options to be set and used for more (or for all)
protocols. In particular, this fixes tests 646 through 649 in an
HTTP-disabled build, which use the MIME API in the mail protocols.
In MultiSSL mode (i.e. when more than one SSL backend is compiled
in), we cannot use the compile time flag `USE_NSS` as indicator that
the NSS backend is in use. As far as Metalink is concerned, the SSL
backend is only used for MD5, SHA-1 and SHA-256 calculations,
therefore one of the available SSL backends is selected at compile
time, in a strict order of preference.
Let's introduce a new `HAVE_NSS_CONTEXT` constant that can be used
to determine whether the SSL backend used for Metalink is the NSS
backend, and use that to guard the code that wants to de-initialize
the NSS-specific data structure.
Ref: https://github.com/curl/curl/pull/1848
... previously it would store a return value even when it returned
error, which could make the value get used anyway!
Reported-by: Brian Carpenter
Closes#1893
- The part kind MIMEKIND_FILE and associated code are suppressed.
- Seek data origin offset not used anymore: suppressed.
- MIMEKIND_NAMEDFILE renamed MIMEKIND_FILE; associated fields/functions
renamed accordingly.
- Curl_getformdata() processes stdin via a callback.
curl_mime_encoder() is operational and documented.
curl tool -F option is extended with ";encoder=".
curl tool --libcurl option generates calls to curl_mime_encoder().
New encoder tests 648 & 649.
Test 1404 extended with an encoder specification.
To support telling a string is nul-terminated, symbol CURL_ZERO_TERMINATED
has been introduced.
Documentation updated accordingly.
symbols in versions updated. Added form API symbols deprecation info.
This feature is badly supported in Windows: as a replacement, a caller has
to use curl_mime_data_cb() with fread, fseek and possibly fclose
callbacks to process opened files.
The cli tool and documentation are updated accordingly.
The feature is however kept internally for form API compatibility, with
the known caveats it always had.
As a side effect, stdin size is not determined by the cli tool even if
possible and this results in a chunked transfer encoding. Test 173 is
updated accordingly.
Previously, the code assumed that at most one of the SSL backends would
be compiled in, emulating OpenSSL's functions if the configured backend
was not OpenSSL itself.
However, now we allow building with multiple SSL backends and choosing
one at runtime. Therefore, metalink needs to be adjusted to handle this
scenario, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The previous message was just too long for ordinary people and it was
encouraging users to use `--insecure` a little too easy.
Based-on-work-by: Frank Denis
Closes#1810Closes#1817
libidn was replaced with libidn2 last year in configure.
Caveat: libidn2 may depend on a list of further libs.
These can be manually specified via CURL_LDFLAG_EXTRAS.
Closes https://github.com/curl/curl/pull/1815
The required low-level logic was already available as part of
`libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1]
option.)
This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION`
(boolean) and the new `curl` command-line option `--compressed-ssh`
to request this `libssh2` feature. To have compression enabled, it
is required that the SSH server supports a (zlib) compatible
compression method and that `libssh2` was built with `zlib` support
enabled.
[1] https://www.libssh2.org/libssh2_session_flag.html
Ref: https://github.com/curl/curl/issues/1732
Closes https://github.com/curl/curl/pull/1735
Commit curl-7_54_0-118-g8b2f22e changed the output format of curl --help
to use <file> and <dir> instead of FILE and DIR, which caused zsh.pl to
produce a broken completion script:
% curl --<TAB>
_curl:10: no such file or directory: seconds
Closes#1779
The fix for this in 8661a0aacc01492e0436275ff36a21734f2541bb wasn't
complete: if the parsed number in num is larger than will fit in a long,
the conversion is undefined behaviour (causing test1427 to fail for me
on IA32 with GCC 7.1, although it passes on AMD64 and ARMv7). Getting
rid of the cast means the comparison will be done using doubles.
It might make more sense for the max argument to also be a double...
Fixes#1750Closes#1749
Make the number parser aware of the maximum limit curl accepts for a
value and return an error immediately if larger, instead of running an
integer overflow later.
Fixes#1730Closes#1736
Prior to this change (SET_)ERRNO mapped to GetLastError/SetLastError
for Win32 and regular errno otherwise.
I reviewed the code and found no justifiable reason for conflating errno
on WIN32 with GetLastError/SetLastError. All Win32 CRTs support errno,
and any Win32 multithreaded CRT supports thread-local errno.
Fixes https://github.com/curl/curl/issues/895
Closes https://github.com/curl/curl/pull/1589
GCC 4.4 complains:
tool_cb_wrt.c:81: error: declaration of ‘isatty’ shadows a global
declaration
/usr/include/unistd.h:782: error: shadowed declaration is here
Fix this by renaming the variable.
Closes https://github.com/curl/curl/pull/1661
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes#1280Closes#1462
... unless "--output -" is used. Binary detection is done by simply
checking for a binary zero in early data.
Added test 1425 1426 to verify.
Closes#1512
The multiply() function that is used to avoid integer overflows, was
itself reason for a possible division by zero error when passed a
specially formatted glob.
Reported-by: GwanYeong Kim
Don't malloc() the temporary buffer, and use the correct type:
SearchPath() works with TCHAR, but SearchPathA() works with char.
Set the buffer size to MAX_PATH, because the terminating null byte
is already included in MAX_PATH.
Reviewed-by: Daniel Stenberg
Reviewed-by: Marcel Raad
Closes#1548
... and support and additional "security patched" date for those who
enhance older versions that way. Pass on the define CURL_PATCHSTAMP with
a date for that.
Building with non-release headers shows the date as [unreleased].
Also: this changes the date format generated in the curlver.h file to be
"YYYY-MM-DD" (no name of the day or month, no time, no time zone) to
make it easier on the eye and easier to parse. Example (new) date
string: 2017-05-09
Suggested-by: Brian Childs
Closes#1474
... using the docs/cmdline-opts/gen.pl script, so that we get all the
command line option documentation from the same source.
The generation of the list has to be done manually and pasted into the
source code.
Closes#1465
... and USE_ENVIRONMENT and --environment. It was once added for RISC OS
support and its platform specific behavior has been annoying ever
since. Added in commit c3c8bbd3b2, mostly unchanged since
then. Most probably not actually used for years.
Closes#1463
clang complains:
tool_cb_prg.c:86:22: error: implicit conversion increases
floating-point precision: 'float' to 'double'
[-Werror,-Wdouble-promotion]
Fix this by using a double instead of a float constant.
Test command 'time curl http://localhost/80GB -so /dev/null' on a Debian
Linux.
Before (middle performing run out 9):
real 0m28.078s
user 0m11.240s
sys 0m12.876s
After (middle performing run out 9)
real 0m26.356s (93.9%)
user 0m5.324s (47.4%)
sys 0m8.368s (65.0%)
Also, doing SFTP over a 200 millsecond latency link is now about 6 times
faster.
Closes#1446
$< is only allowed in implicit rules in some non-GNU makes (e.g. BSD,
AIX) so avoid use elsewhere by referencing the dependent curl.1 file
directly instead. This is somewhat tricky because the file is supplied
in the packaged tar ball (but not in git) but must still be able to be
rebuilt when its dependencies change. The right thing must happen in
both tar ball and git source trees, as well as in both in-tree and
out-of-tree builds.
The POSIX standard location is <poll.h>. Using <sys/poll.h> results in
warning spam when using the musl standard library.
Closes https://github.com/curl/curl/pull/1406
MinGW complains:
tool_operate.c:197:15: error: comparison is always true due to limited range
of data type [-Werror=type-limits]
Fix this by only doing the comparison if 'long' is large enough to hold the
constant it is compared with.
Closes https://github.com/curl/curl/pull/1378
Also make Perl mandatory to allow building the docs.
While CMakeLists.txt could probably read the list of manual pages from
Makefile.am, actually putting those in CMakeLists.txt is cleaner so that
is what is done here.
Fixes#1230
Ref: https://github.com/curl/curl/pull/1288
- Show the HTTPS-proxy options on CURLE_SSL_CACERT if libcurl was built
with HTTPS-proxy support.
Prior to this change those options were shown only if an HTTPS-proxy was
specified by --proxy, but that did not take into account environment
variables such as http_proxy, https_proxy, etc. Follow-up to e1187c4.
Bug: https://github.com/curl/curl/issues/1331
Reported-by: Nehal J Wani
If a % ended the statement, the string's trailing NUL would be skipped
and memory past the end of the buffer would be accessed and potentially
displayed as part of the --write-out output. Added tests 1440 and 1441
to check for this kind of condition.
Reported-by: Brian Carpenter
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
The man page taken from the release package is found in a different
location than if it's built from source. It must be referenced as $< in
the rule to get its correct location in the VPATH.
This eliminates the need for an external gzip program, which wasn't
working with Busybox's gzip, anyway. It now compresses using perl's
IO::Compress::Gzip
This commit introduces the CURL_SSLVERSION_MAX_* constants as well as
the --tls-max option of the curl tool.
Closes https://github.com/curl/curl/pull/1166
Mark intended fallthroughs with /* FALLTHROUGH */ so that gcc will know
it's expected and won't warn on [-Wimplicit-fallthrough=].
Closes https://github.com/curl/curl/pull/1297
- Change CURLOPT_PROXY_CAPATH to return CURLE_NOT_BUILT_IN if the option
is not supported, which is the same as what we already do for
CURLOPT_CAPATH.
- Change the curl tool to handle CURLOPT_PROXY_CAPATH error
CURLE_NOT_BUILT_IN as a warning instead of as an error, which is the
same as what we already do for CURLOPT_CAPATH.
- Fix CAPATH docs to show that CURLE_NOT_BUILT_IN is returned when the
respective CAPATH option is not supported by the SSL library.
Ref: https://github.com/curl/curl/pull/1257
When CURLE_SSL_CACERT occurs the tool shows a lengthy error message to
the user explaining possible solutions such as --cacert and --insecure.
This change appends to that message similar options --proxy-cacert and
--proxy-insecure when there's a specified HTTPS proxy.
Closes https://github.com/curl/curl/issues/1258
In addition to unix domain sockets, Linux also supports an
abstract namespace which is independent of the filesystem.
In order to support it, add new CURLOPT_ABSTRACT_UNIX_SOCKET
option which uses the same storage as CURLOPT_UNIX_SOCKET_PATH
internally, along with a flag to specify abstract socket.
On non-supporting platforms, the abstract address will be
interpreted as an empty string and fail gracefully.
Also add new --abstract-unix-socket tool parameter.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Chungtsun Li (typeless)
Reviewed-by: Daniel Stenberg
Reviewed-by: Peter Wu
Closes#1197Fixes#1061
The <netinet/tcp.h> is a leftover from the past when TCP socket options
were set in this file. This include causes build issues on AIX 4.3.
Reported-by: Kim Minjoong
Closes#1178
CURLOPT_SOCKS_PROXY -> CURLOPT_PRE_PROXY
Added the corresponding --preroxy command line option. Sets a SOCKS
proxy to connect to _before_ connecting to a HTTP(S) proxy.
... the newly introduced CURLOPT_SOCKS_PROXY is special and should be
asked for specially. (Needs new code.)
Unified proxy type to a single variable in the config struct.
This was added as part of the SOCKS+HTTPS proxy merge but there's no
need to support this as we prefer to have the protocol specified as a
prefix instead.
Prior to this change we depended on errno if strtol could not perform a
conversion. POSIX says EINVAL *may* be set. Some implementations like
Microsoft's will not set it if there's no conversion.
Ref: https://github.com/curl/curl/commit/ee4f7660#commitcomment-19658189
Adds access to the effectively used protocol/scheme to both libcurl and
curl, both in string and numeric (CURLPROTO_*) form.
Note that the string form will be uppercase, as it is just the internal
string.
As these strings are declared internally as const, and all other strings
returned by curl_easy_getinfo() are de-facto const as well, string
handling in getinfo.c got const-ified.
Closes#1137
* HTTPS proxies:
An HTTPS proxy receives all transactions over an SSL/TLS connection.
Once a secure connection with the proxy is established, the user agent
uses the proxy as usual, including sending CONNECT requests to instruct
the proxy to establish a [usually secure] TCP tunnel with an origin
server. HTTPS proxies protect nearly all aspects of user-proxy
communications as opposed to HTTP proxies that receive all requests
(including CONNECT requests) in vulnerable clear text.
With HTTPS proxies, it is possible to have two concurrent _nested_
SSL/TLS sessions: the "outer" one between the user agent and the proxy
and the "inner" one between the user agent and the origin server
(through the proxy). This change adds supports for such nested sessions
as well.
A secure connection with a proxy requires its own set of the usual SSL
options (their actual descriptions differ and need polishing, see TODO):
--proxy-cacert FILE CA certificate to verify peer against
--proxy-capath DIR CA directory to verify peer against
--proxy-cert CERT[:PASSWD] Client certificate file and password
--proxy-cert-type TYPE Certificate file type (DER/PEM/ENG)
--proxy-ciphers LIST SSL ciphers to use
--proxy-crlfile FILE Get a CRL list in PEM format from the file
--proxy-insecure Allow connections to proxies with bad certs
--proxy-key KEY Private key file name
--proxy-key-type TYPE Private key file type (DER/PEM/ENG)
--proxy-pass PASS Pass phrase for the private key
--proxy-ssl-allow-beast Allow security flaw to improve interop
--proxy-sslv2 Use SSLv2
--proxy-sslv3 Use SSLv3
--proxy-tlsv1 Use TLSv1
--proxy-tlsuser USER TLS username
--proxy-tlspassword STRING TLS password
--proxy-tlsauthtype STRING TLS authentication type (default SRP)
All --proxy-foo options are independent from their --foo counterparts,
except --proxy-crlfile which defaults to --crlfile and --proxy-capath
which defaults to --capath.
Curl now also supports %{proxy_ssl_verify_result} --write-out variable,
similar to the existing %{ssl_verify_result} variable.
Supported backends: OpenSSL, GnuTLS, and NSS.
* A SOCKS proxy + HTTP/HTTPS proxy combination:
If both --socks* and --proxy options are given, Curl first connects to
the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS
proxy.
TODO: Update documentation for the new APIs and --proxy-* options.
Look for "Added in 7.XXX" marks.
We're mostly saying just "curl" in lower case these days so here's a big
cleanup to adapt to this reality. A few instances are left as the
project could still formally be considered called cURL.
As they are after all part of the public API. Saves space and reduces
complexity. Remove the strcase defines from the curlx_ family.
Suggested-by: Dan Fandrich
Idea: https://curl.haxx.se/mail/lib-2016-10/0136.html
These two public functions have been mentioned as deprecated since a
very long time but since they are still part of the API and ABI we need
to keep them around.
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
RFC7512 provides a standard method to reference certificates in PKCS#11
tokens, by means of a URI starting 'pkcs11:'.
We're working on fixing various applications so that whenever they would
have been able to use certificates from a file, users can simply insert
a PKCS#11 URI instead and expect it to work. This expectation is now a
part of the Fedora packaging guidelines, for example.
This doesn't work with cURL because of the way that the colon is used
to separate the certificate argument from the passphrase. So instead of
curl -E 'pkcs11:manufacturer=piv_II;id=%01' …
I instead need to invoke cURL with the colon escaped, like this:
curl -E 'pkcs11\:manufacturer=piv_II;id=%01' …
This is suboptimal because we want *consistency* — the URI should be
usable in place of a filename anywhere, without having strange
differences for different applications.
This patch therefore disables the processing in parse_cert_parameter()
when the string starts with 'pkcs11:'. It means you can't pass a
passphrase with an unescaped PKCS#11 URI, but there's no need to do so
because RFC7512 allows a PIN to be given as a 'pin-value' attribute in
the URI itself.
Also, if users are already using RFC7512 URIs with the colon escaped as
in the above example — even providing a passphrase for cURL to handling
instead of using a pin-value attribute, that will continue to work
because their string will start 'pkcs11\:' and won't match the check.
What *does* break with this patch is the extremely unlikely case that a
user has a file which is in the local directory and literally named
just "pkcs11", and they have a passphrase on it. If that ever happened,
the user would need to refer to it as './pkcs11:<passphrase>' instead.
After a few wasted hours hunting down the reason for slowness during a
TLS handshake that turned out to be because of TCP_NODELAY not being
set, I think we have enough motivation to toggle the default for this
option. We now enable TCP_NODELAY by default and allow applications to
switch it off.
This also makes --tcp-nodelay unnecessary, but --no-tcp-nodelay can be
used to disable it.
Thanks-to: Tim Rühsen
Bug: https://curl.haxx.se/mail/lib-2016-06/0143.html
... causing SIGSEGV while parsing URL with too many globs.
Minimal example:
$ curl $(for i in $(seq 101); do printf '{a}'; done)
Reported-by: Romain Coltel
Bug: https://bugzilla.redhat.com/1340757
- Move the existing scheme check from tool_operate.
In the case of --remote-header-name we want to parse Content-disposition
for a filename, but only if the scheme is http or https. A recent
adjustment 0dc4d8e was made to account for schemeless URLs however it's
not 100% accurate. To remedy that I've moved the scheme check to the
header callback, since at that point the library has already determined
the scheme.
Bug: https://github.com/curl/curl/issues/760
Reported-by: Kai Noda
It does open up a miniscule risk that one of the other protocols that
libcurl could use would send back a Content-Disposition header and then
curl would act on it even if not HTTP.
A future mitigation for this risk would be to allow the callback to ask
libcurl which protocol is being used.
Verified with test 1312
Closes#760
In commit 2e42b0a252 (Jan 2008) we made the option "--socks" deprecated
and it has not been documented since. The more explicit socks options
(like --socks4 or --socks5) should be used.
The underlying libcurl option used for this feature is
CURLOPT_FTP_CREATE_MISSING_DIRS which has the ability to retry the dir
creation, but it was never set to do that by the command line tool.
Now it does.
Bug: https://curl.haxx.se/mail/archive-2016-04/0021.html
Reported-by: John Wanghui
Help-by: Leif W
As these two options provide identical functionality, the former for
SOCK5 proxies and the latter for HTTP proxies, merged the two options
together.
As such CURLOPT_SOCKS5_GSSAPI_SERVICE is marked as deprecated as of
7.49.0.
Supports HTTP/2 over clear TCP
- Optimize switching to HTTP/2 by removing calls to init and setup
before switching. Switching will eventually call setup and setup calls
init.
- Supports new version to “force” the use of HTTP/2 over clean TCP
- Add common line parameter “--http2-prior-knowledge” to the Curl
command line tool.
In makefile.m32, option -ssh2 (libssh2) automatically implied -ssl
(OpenSSL) option, with no way to override it with -winssl. Since both
libssh2 and curl support using Windows's built-in SSL backend, modify
the logic to allow that combination.
- Add tests.
- Add an example to CURLOPT_TFTP_NO_OPTIONS.3.
- Add --tftp-no-options to expose CURLOPT_TFTP_NO_OPTIONS.
Bug: https://github.com/curl/curl/issues/481
Extract the filename from the last slash or backslash. Prior to this
change backslashes could be part of the filename.
This change needed for the curl tool built for Cygwin. Refer to the
CYGWIN addendum in advisory 20160127B.
Bug: https://curl.haxx.se/docs/adv_20160127B.html
- Add unit test 1604 to test the sanitize_file_name function.
- Use -DCURL_STATICLIB when building libcurltool for unit testing.
- Better detection of reserved DOS device names.
- New flags to modify sanitize behavior:
SANITIZE_ALLOW_COLONS: Allow colons
SANITIZE_ALLOW_PATH: Allow path separators and colons
SANITIZE_ALLOW_RESERVED: Allow reserved device names
SANITIZE_ALLOW_TRUNCATE: Allow truncating a long filename
- Restore sanitization of banned characters from user-specified outfile.
Prior to this commit sanitization of a user-specified outfile was
temporarily disabled in 2b6dadc because there was no way to allow path
separators and colons through while replacing other banned characters.
Now in such a case we call the sanitize function with
SANITIZE_ALLOW_PATH which allows path separators and colons to pass
through.
Closes https://github.com/curl/curl/issues/624
Reported-by: Octavio Schroeder
Due to path separators being incorrectly sanitized in --output
pathnames, eg -o c:\foo => c__foo
This is a partial revert of 3017d8a until I write a proper fix. The
remote-name will continue to be sanitized, but if the user specified an
--output with string replacement (#1, #2, etc) that data is unsanitized
until I finish a fix.
Bug: https://github.com/bagder/curl/issues/624
Reported-by: Octavio Schroeder
curl does not sanitize colons in a remote file name that is used as the
local file name. This may lead to a vulnerability on systems where the
colon is a special path character. Currently Windows/DOS is the only OS
where this vulnerability applies.
CVE-2016-0754
Bug: http://curl.haxx.se/docs/adv_20160127B.html
This allows the root Makefile.am to include the Makefile.inc without
causing automake to warn on it (variables named *_SOURCES are
magic). curl_SOURCES is then instead assigned properly in
src/Makefile.am only.
Closes#577
