Since we just started make use of free(NULL) in order to simplify code,
this change takes it a step further and:
- converts lots of Curl_safefree() calls to good old free()
- makes Curl_safefree() not check the pointer before free()
The (new) rule of thumb is: if you really want a function call that
frees a pointer and then assigns it to NULL, then use Curl_safefree().
But we will prefer just using free() from now on.
The function "free" is documented in the way that no action shall occur for
a passed null pointer. It is therefore not needed that a function caller
repeats a corresponding check.
http://stackoverflow.com/questions/18775608/free-a-null-pointer-anyway-or-check-first
This issue was fixed by using the software Coccinelle 1.0.0-rc24.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
...after the method line:
"Since the Host field-value is critical information for handling a
request, a user agent SHOULD generate Host as the first header field
following the request-line." / RFC 7230 section 5.4
Additionally, this will also make libcurl ignore multiple specified
custom Host: headers and only use the first one. Test 1121 has been
updated accordingly
Bug: http://curl.haxx.se/bug/view.cgi?id=1491
Reported-by: Rainer Canavan
SSLeay was the name of the library that was subsequently turned into
OpenSSL many moons ago (1999). curl does not work with the old SSLeay
library since years. This is now reflected by only using USE_OPENSSL in
code that depends on OpenSSL.
Sending NTLM/Negotiate header again after successful authentication
breaks the connection with certain Proxies and request types (POST to MS
Forefront).
This commit disables pipelining for HTTP/2 or upgraded connections. For
HTTP/2, we do not support multiplexing. In general, requests cannot be
pipelined in an upgraded connection, since it is now different protocol.
Previously if HTTP/2 traffic is appended to HTTP Upgrade response header
(thus they are in the same buffer), the trailing HTTP/2 traffic is not
processed and lost. The appended data is most likely SETTINGS frame.
If it is lost, nghttp2 library complains server does not obey the HTTP/2
protocol and issues GOAWAY frame and curl eventually drops connection.
This commit fixes this problem and now trailing data is processed.
To provide consistent behaviour between the various HTTP authentication
functions use CURLcode based error codes for Curl_input_digest()
especially as the calling code doesn't use the specific error code just
that it failed.
HTTP 1.1 is clearly specified to only allow three digit response codes,
and libcurl used sscanf("%3d") for that purpose. This made libcurl
support smaller numbers but not larger. It does now, but we will not
make any specific promises nor document this further since it is going
outside of what HTTP is.
Bug: http://curl.haxx.se/bug/view.cgi?id=1441
Reported-by: Balaji
... for the local variable name in functions holding the return
code. Using the same name universally makes code easier to read and
follow.
Also, unify code for checking for CURLcode errors with:
if(result) or if(!result)
instead of
if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
Historically the default "unknown" value for progress.size_dl and
progress.size_ul has been zero, since these values are initialized
implicitly by the calloc that allocates the curl handle that these
variables are a part of. Users of curl that install progress
callbacks may expect these values to always be >= 0.
Currently it is possible for progress.size_dl and progress.size_ul
to by set to a value of -1, if Curl_pgrsSetDownloadSize() or
Curl_pgrsSetUploadSize() are passed a "size" of -1 (which a few
places currently do, and a following patch will add more). So
lets update Curl_pgrsSetDownloadSize() and Curl_pgrsSetUploadSize()
so they make sure that these variables always contain a value that
is >= 0.
Updates test579 and test599.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
... to handle "*/[total]". Also, removed the strange hack that made
CURLOPT_FAILONERROR on a 416 response after a *RESUME_FROM return
CURLE_OK.
Reported-by: Dimitrios Siganos
Bug: http://curl.haxx.se/mail/lib-2014-06/0221.html
"Expect: 100-continue", which was once deprecated in HTTP/2, is now
resurrected in HTTP/2 draft 14. This change adds its support to
HTTP/2 code. This change also includes stricter header field
checking.
1 - fixes the warnings when built without http2 support
2 - adds CURLE_HTTP2, a new error code for errors detected by nghttp2
basically when they are about http2 specific things.
- Replace CURLAUTH_GSSNEGOTIATE with CURLAUTH_NEGOTIATE
- CURL_VERSION_GSSNEGOTIATE is deprecated which
is served by CURL_VERSION_SSPI, CURL_VERSION_GSSAPI and
CURUL_VERSION_SPNEGO now.
- Remove display of feature 'GSS-Negotiate'
It's wrong to assume that we can send a single SPNEGO packet which will
complete the authentication. It's a *negotiation* — the clue is in the
name. So make sure we handle responses from the server.
Curl_input_negotiate() will already handle bailing out if it thinks the
state is GSS_S_COMPLETE (or SEC_E_OK on Windows) and the server keeps
talking to us, so we should avoid endless loops that way.
Make all code use connclose() and connkeep() when changing the "close
state" for a connection. These two macros take a string argument with an
explanation, and debug builds of curl will include that in the debug
output. Helps tracking connection re-use/close issues.
Commit 517b06d657 (in 7.36.0) that brought the CREDSPERREQUEST flag
only set it for HTTPS, making HTTP less good at doing connection re-use
than it should be. Now set it for HTTP as well.
Simple test case
"curl -v -u foo:bar localhost --next -u bar:foo localhos"
Bug: http://curl.haxx.se/mail/lib-2014-05/0127.html
Reported-by: Kamil Dudka
set.infilesize in this case was modified in several places, which could
lead to repeated requests using the same handle to get unintendent/wrong
consequences based on what the previous request did!
This makes the findprotocol() function work as intended so that libcurl
can properly be restricted to not support HTTP while still supporting
HTTPS - since the HTTPS handler previously set both the HTTP and HTTPS
bits in the protocol field.
This fixes --proto and --proto-redir for most SSL protocols.
This is done by adding a few new convenience defines that groups HTTP
and HTTPS, FTP and FTPS etc that should then be used when the code wants
to check for both protocols at once. PROTO_FAMILY_[protocol] style.
Bug: https://github.com/bagder/curl/pull/97
Reported-by: drizzt
Updated the docs to clarify and the code accordingly, with test 1528 to
verify:
When CURLHEADER_SEPARATE is set and libcurl is asked to send a request
to a proxy but it isn't CONNECT, then _both_ header lists
(CURLOPT_HTTPHEADER and CURLOPT_PROXYHEADER) will be used since the
single request is then made for both the proxy and the server.
In addition to FTP, other connection based protocols such as IMAP, POP3,
SMTP, SCP, SFTP and LDAP require a new connection when different log-in
credentials are specified. Fixed the detection logic to include these
other protocols.
Bug: http://curl.haxx.se/docs/adv_20140326A.html
Because of the socket is unblocking, PolarSSL does need call to getsock to
get the action to perform in multi environment.
In some cases, it might happen we have not received yet all data to perform
the handshake. ssh_handshake returns POLARSSL_ERR_NET_WANT_READ, the state
is updated but because of the getsock has not the proper #define macro to,
the library never prevents to select socket for input thus the socket will
never be awaken when last data is available. Thus it leads to timeout.
