returning 'time_t' is problematic when that type is unsigned and we
return values less than zero to signal "already expired", used in
several places in the code.
Closes#2021
... since the 'tv' stood for timeval and this function does not return a
timeval struct anymore.
Also, cleaned up the Curl_timediff*() functions to avoid typecasts and
clean up the descriptive comments.
Closes#2011
... to cater for systems with unsigned time_t variables.
- Renamed the functions to curlx_timediff and Curl_timediff_us.
- Added overflow protection for both of them in either direction for
both 32 bit and 64 bit time_ts
- Reprefixed the curlx_time functions to use Curl_*
Reported-by: Peter Piekarski
Fixes#2004Closes#2005
The timer should be started after conn->connecttime is set. Otherwise
the timer could expire without this condition being true:
/* should we try another protocol family? */
if(i == 0 && conn->tempaddr[1] == NULL &&
curlx_tvdiff(now, conn->connecttime) >= HAPPY_EYEBALLS_TIMEOUT) {
Ref: #1928
This change does two things:
1. It un-breaks the build in Xcode 9.0. (Xcode 9.0 is currently
failing trying to compile connectx() in lib/connect.c.)
2. It finally weak-links the connectx() function, and falls back on
connect() when run on older operating systems.
... to make all libcurl internals able to use the same data types for
the struct members. The timeval struct differs subtly on several
platforms so it makes it cumbersome to use everywhere.
Ref: #1652Closes#1693
Prior to this change (SET_)ERRNO mapped to GetLastError/SetLastError
for Win32 and regular errno otherwise.
I reviewed the code and found no justifiable reason for conflating errno
on WIN32 with GetLastError/SetLastError. All Win32 CRTs support errno,
and any Win32 multithreaded CRT supports thread-local errno.
Fixes https://github.com/curl/curl/issues/895
Closes https://github.com/curl/curl/pull/1589
With the introduction of expire IDs and the fact that existing timers
can be removed now and thus never expire, the concept with adding a
"latest" timer is not working anymore as it risks to not expire at all.
So, to be certain the timers actually are in line and will expire, the
plain Curl_expire() needs to be used. The _latest() function was added
as a sort of shortcut in the past that's quite simply not necessary
anymore.
Follow-up to 31b39c40cf
Reported-by: Paul Harris
Closes#1555
A) reduces the timeout lists drastically
B) prevents a lot of superfluous loops for timers that expires "in vain"
when it has actually already been extended to fire later on
It doesn't benefit us much as the connection could get closed at
any time, and also by checking we lose the ability to determine
if the socket was closed by reading zero bytes.
Reported-by: Michael Kaufmann
Closes https://github.com/curl/curl/pull/1134
Adds access to the effectively used protocol/scheme to both libcurl and
curl, both in string and numeric (CURLPROTO_*) form.
Note that the string form will be uppercase, as it is just the internal
string.
As these strings are declared internally as const, and all other strings
returned by curl_easy_getinfo() are de-facto const as well, string
handling in getinfo.c got const-ified.
Closes#1137
* HTTPS proxies:
An HTTPS proxy receives all transactions over an SSL/TLS connection.
Once a secure connection with the proxy is established, the user agent
uses the proxy as usual, including sending CONNECT requests to instruct
the proxy to establish a [usually secure] TCP tunnel with an origin
server. HTTPS proxies protect nearly all aspects of user-proxy
communications as opposed to HTTP proxies that receive all requests
(including CONNECT requests) in vulnerable clear text.
With HTTPS proxies, it is possible to have two concurrent _nested_
SSL/TLS sessions: the "outer" one between the user agent and the proxy
and the "inner" one between the user agent and the origin server
(through the proxy). This change adds supports for such nested sessions
as well.
A secure connection with a proxy requires its own set of the usual SSL
options (their actual descriptions differ and need polishing, see TODO):
--proxy-cacert FILE CA certificate to verify peer against
--proxy-capath DIR CA directory to verify peer against
--proxy-cert CERT[:PASSWD] Client certificate file and password
--proxy-cert-type TYPE Certificate file type (DER/PEM/ENG)
--proxy-ciphers LIST SSL ciphers to use
--proxy-crlfile FILE Get a CRL list in PEM format from the file
--proxy-insecure Allow connections to proxies with bad certs
--proxy-key KEY Private key file name
--proxy-key-type TYPE Private key file type (DER/PEM/ENG)
--proxy-pass PASS Pass phrase for the private key
--proxy-ssl-allow-beast Allow security flaw to improve interop
--proxy-sslv2 Use SSLv2
--proxy-sslv3 Use SSLv3
--proxy-tlsv1 Use TLSv1
--proxy-tlsuser USER TLS username
--proxy-tlspassword STRING TLS password
--proxy-tlsauthtype STRING TLS authentication type (default SRP)
All --proxy-foo options are independent from their --foo counterparts,
except --proxy-crlfile which defaults to --crlfile and --proxy-capath
which defaults to --capath.
Curl now also supports %{proxy_ssl_verify_result} --write-out variable,
similar to the existing %{ssl_verify_result} variable.
Supported backends: OpenSSL, GnuTLS, and NSS.
* A SOCKS proxy + HTTP/HTTPS proxy combination:
If both --socks* and --proxy options are given, Curl first connects to
the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS
proxy.
TODO: Update documentation for the new APIs and --proxy-* options.
Look for "Added in 7.XXX" marks.
Visual C++ now complains about implicitly casting time_t (64-bit) to
long (32-bit). Fix this by changing some variables from long to time_t,
or explicitly casting to long where the public interface would be
affected.
Closes#1131
Curl_select_ready() was the former API that was replaced with
Curl_select_check() a while back and the former arg setup was provided
with a define (in order to leave existing code unmodified).
Now we instead offer SOCKET_READABLE and SOCKET_WRITABLE for the most
common shortcuts where only one socket is checked. They're also more
visibly macros.
This fixes a merge error in commit 7f3df80 caused by commit 332e8d6.
Additionally, this changes Curl_verify_windows_version for Windows App
builds to assume to always be running on the target Windows version.
There seems to be no way to determine the Windows version from a
UWP app. Neither GetVersion(Ex), nor VerifyVersionInfo, nor the
Version Helper functions are supported.
Bug: https://github.com/curl/curl/pull/820#issuecomment-250889878
Reported-by: Paul Joyce
Closes https://github.com/curl/curl/pull/1048
With HTTP/2 each transfer is made in an indivial logical stream over the
connection, making most previous errors that caused the connection to get
forced-closed now instead just kill the stream and not the connection.
Fixes#941
Sometimes, in systems with both ipv4 and ipv6 addresses but where the
network doesn't support ipv6, Curl_is_connected returns an error
(intermittently) even if the ipv4 socket connects successfully.
This happens because there's a for-loop that iterates on the sockets but
the error variable is not resetted when the ipv4 is checked and is ok.
This patch fixes this problem by setting error to 0 when checking the
second socket and not having a result yet.
Fixes#794
curl_printf.h defines printf to curl_mprintf, etc. This can cause
problems with external headers which may use
__attribute__((format(printf, ...))) markers etc.
To avoid that they cause problems with system includes, we include
curl_printf.h after any system headers. That makes the three last
headers to always be, and we keep them in this order:
curl_printf.h
curl_memory.h
memdebug.h
None of them include system headers, they all do funny #defines.
Reported-by: David Benjamin
Fixes#743
This commit fixes a Clang warning introduced in curl-7_48_0-190-g8f72b13:
Error: CLANG_WARNING:
lib/connect.c:1120:11: warning: The right operand of '==' is a garbage value
1118| }
1119|
1120|-> if(-1 == rc)
1121| error = SOCKERRNO;
1122| }
For a single-stream download from localhost, we managed to increase
transfer speed from 1.6MB/sec to around 400MB/sec, mostly because of
this single fix.
connect.c:953:5: warning: initializer element is not computable at load
time
connect.c:953:5: warning: missing initializer for field 'dwMinorVersion'
of 'OSVERSIONINFOEX'
curl_sspi.c:97:5: warning: initializer element is not computable at load
time
curl_sspi.c:97:5: warning: missing initializer for field 'szCSDVersion'
of 'OSVERSIONINFOEX'
When CURL_SOCKET_BAD is returned in the callback, it should be treated
as an error (CURLE_COULDNT_CONNECT) if no other socket is subsequently
created when trying to connect to a server.
Bug: http://curl.haxx.se/mail/lib-2015-06/0047.html
This header file must be included after all header files except
memdebug.h, as it does similar memory function redefinitions and can be
similarly affected by conflicting definitions in system or dependent
library headers.
Bug: https://github.com/bagder/curl/pull/168
(trynextip)
- Don't try the "other" protocol family unless IPv6 is available. In an
IPv4-only build the other family can only be IPv6 which is unavailable.
This change essentially stops IPv4-only builds from attempting the
"happy eyeballs" secondary parallel connection that is supposed to be
used by the "other" address family.
Prior to this change in IPv4-only builds that secondary parallel
connection attempt could be erroneously used by the same family (IPv4)
which caused a bug where every address after the first for a host could
be tried twice, often in parallel. This change fixes that bug. An
example of the bug is shown below.
Assume MTEST resolves to 3 addresses 127.0.0.2, 127.0.0.3 and 127.0.0.4:
* STATE: INIT => CONNECT handle 0x64f4b0; line 1046 (connection #-5000)
* Rebuilt URL to: http://MTEST/
* Added connection 0. The cache now contains 1 members
* STATE: CONNECT => WAITRESOLVE handle 0x64f4b0; line 1083
(connection #0)
* Trying 127.0.0.2...
* STATE: WAITRESOLVE => WAITCONNECT handle 0x64f4b0; line 1163
(connection #0)
* Trying 127.0.0.3...
* connect to 127.0.0.2 port 80 failed: Connection refused
* Trying 127.0.0.3...
* connect to 127.0.0.3 port 80 failed: Connection refused
* Trying 127.0.0.4...
* connect to 127.0.0.3 port 80 failed: Connection refused
* Trying 127.0.0.4...
* connect to 127.0.0.4 port 80 failed: Connection refused
* connect to 127.0.0.4 port 80 failed: Connection refused
* Failed to connect to MTEST port 80: Connection refused
* Closing connection 0
* The cache now contains 0 members
* Expire cleared
curl: (7) Failed to connect to MTEST port 80: Connection refused
The bug was born in commit bagder/curl@2d435c7.
In function Curl_closesocket() in connect.c the call to
Curl_multi_closed() was wrongly omitted if a socket close function
(CURLOPT_CLOSESOCKETFUNCTION) is registered.
That would lead to not removing the socket from the internal hash table
and not calling the multi socket callback appropriately.
Bug: http://curl.haxx.se/bug/view.cgi?id=1493
For consistency, as we seem to have a bit of a mixed bag, changed all
instances of ipv4 and ipv6 in comments and documentations to use the
correct case.
There was a confusion between these: this commit tries to disambiguate them.
- Scope can be computed from the address itself.
- Scope id is scope dependent: it is currently defined as 1-based local
interface index for link-local scoped addresses, and as a site index(?) for
(obsolete) site-local addresses. Linux only supports it for link-local
addresses.
The URL parser properly parses a scope id as an interface index, but stores it
in a field named "scope": confusion. The field has been renamed into "scope_id".
Curl_if2ip() used the scope id as it was a scope. This caused failures
to bind to an interface.
Scope is now computed from the addresses and Curl_if2ip() matches them.
If redundantly specified in the URL, scope id is check for mismatch with
the interface index.
This commit should fix SF bug #1451.
This patch prepares for adding UNIX domain sockets support.
TCP_NODELAY and TCP_KEEPALIVE are specific to TCP/IP sockets, so do not
apply these to other socket types. bindlocal only works for IP sockets
(independent of TCP/UDP), so filter that out too for other types.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
When the connection code decides to close a socket it informs the multi
system via the Curl_multi_closed function. The multi system may, in
turn, invoke the CURLMOPT_SOCKETFUNCTION function with
CURL_POLL_REMOVE. This happens after the socket has already been
closed. Reorder the code so that CURL_POLL_REMOVE is called before the
socket is closed.
Debug output 'typo' fix.
Don't print an extra "0x" in
* Pipe broke: handle 0x0x2546d88, url = /
Add debug output.
Print the number of connections in the connection cache when
adding one, and not only when one is removed.
Fix typos in comments.
... for the local variable name in functions holding the return
code. Using the same name universally makes code easier to read and
follow.
Also, unify code for checking for CURLcode errors with:
if(result) or if(!result)
instead of
if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
Introducing Curl_expire_latest(). To be used when we the code flow only
wants to get called at a later time that is "no later than X" so that
something can be checked (and another timeout be added).
The low-speed logic for example could easily be made to set very many
expire timeouts if it would be called faster or sooner than what it had
set its own timer and this goes for a few other timers too that aren't
explictiy checked for timer expiration in the code.
If there's no condition the code that says if(time-passed >= TIME), then
Curl_expire_latest() is preferred to Curl_expire().
If there exists such a condition, it is on the other hand important that
Curl_expire() is used and not the other.
Bug: http://curl.haxx.se/mail/lib-2014-06/0235.html
Reported-by: Florian Weimer
A conditionally compiled block in connect.c references WinSock 2
symbols, but used `#ifdef HAVE_WINSOCK_H` instead of `#ifdef
HAVE_WINSOCK2_H`.
Bug: http://curl.haxx.se/mail/lib-2014-08/0155.html
Make all code use connclose() and connkeep() when changing the "close
state" for a connection. These two macros take a string argument with an
explanation, and debug builds of curl will include that in the debug
output. Helps tracking connection re-use/close issues.
In commit 0b3750b5c2 (released in 7.36.0) we fixed a timeout issue
but instead broke the timings.
To fix this, I introduce a new timestamp to use for the timeouts and
restored the previous timestamp and timestamp position so that the old
timer functionality is restored.
In addition to that, that change also broke connection timeouts for when
more than one connect was used (as it would then count the total time
from the first connect and not for the most recent one). Now
Curl_timeleft() has been modified so that it checks against different
start times depending on which timeout it checks.
Test 1303 is updated accordingly.
Bug: http://curl.haxx.se/mail/lib-2014-05/0147.html
Reported-by: Ryan Braud
Starting with Visual Studio 2013 (VC12) and Windows 8.1 the
GetVersionInfoEx() function has been marked as deprecated and it's
return value atered. Updated connect.c and curl_sspi.c to use
VerifyVersionInfo() where possible, which has been available since
Windows 2000.
With the recently added timeout "reminder" functionality, there's no
reason left for us to execute timeout code before the time is
ripe. Simplifies the handling too.
This will make the *TIMEOUT and *CONNECTTIMEOUT options more accurate
again, which probably is most important when the *_MS versions are used.
In multi_socket, make sure to update 'now' after having handled activity
on a socket.
Fixes a bug when all addresses in the first family fail immediately, due
to "Network unreachable" for example, curl would hang and never try the
next address family.
Iterate through all address families when to trying establish the first
connection attempt.
Bug: http://curl.haxx.se/bug/view.cgi?id=1315
Reported-by: Michal Górny and Anthony G. Basile
This fixes a rare Happy Eyeballs bug where if the first IP family runs
out of addresses before the second-family-timer fires, and the second
IP family's first connect fails immediately, no further IPs of the
second family are attempted.
singleipconnect() could return the file descriptor of an open socket
even though the function returned a CURLE_COULDNT_CONNECT error code
from commit ed1662c374 and 02fbc26d59.
This could cause tests 19, 704 and 1233 to fail on FreeBSD, AIX and
Solaris.
singleipconnect() did not return the open socket descriptor on some
errors, thereby sometimes causing a socket leak. This patch ensures
the socket is always returned.
This patch adds a 200ms delay between the first and second address
family socket connection attempts.
It also iterates over IP addresses in the order returned by the
system, meaning most dual-stack systems will try IPv6 first.
Additionally, it refactors the connect code, removing most code that
handled synchronous connects. Since all sockets are now non-blocking,
the logic can be made simpler.
Introduced in commit 7d7df83198 curl would loop displaying "Whut?"
if it was trying to connect to an address and port that didn't have
anything listening on it.
This patch fixes a bug in Happy Eyeballs where curl would wait for a
connect response from socket1 before checking socket2.
Also, it updates error messages for failed connections, showing the ip
addresses that failed rather than just the host name repeatedly.
Bug: http://curl.haxx.se/mail/lib-2013-10/0236.html
Reported-by: Paul Marks
