configure --enable-debug now enables -Wassign-enum with clang,
identifying several enum "abuses" also fixed.
Reported-by: Gisle Vanem
Bug: 879007f811 (commitcomment-42087553)Closes#5929
The cache content is not duplicated, like other caches, but the setting
and specified file name are.
Test 1908 is extended to verify this somewhat. Since the duplicated
handle gets the same file name, the test unfortunately overwrites the
same file twice (with different contents) which makes it hard to check
automatically.
Closes#5923
A shared connection cache is not thread-safe is a known issue. Stop
testing this until we believe this issue is addressed. Reduces
occasional test failures we don't care about.
The test code in lib1541.c is left in git to allow us to restore it when
we get to fix this.
Closes#5922
Remove the tests 530, 584, 1900, 1901, 1902, 1903 and 2033. They were
previously disabled.
The Pipelining code was removed from curl in commit 2f44e94efb,
April 2019.
Closes#5921
const struct curl_easyoption *curl_easy_option_by_name(const char *name);
const struct curl_easyoption *curl_easy_option_by_id (CURLoption id);
const struct curl_easyoption *
curl_easy_option_next(const struct curl_easyoption *prev);
The purpose is to provide detailed enough information to allow for
example libcurl bindings to get option information at run-time about
what easy options that exist and what arguments they expect.
Assisted-by: Jeroen Ooms
Closes#5365
Currently the file tests/libtest/lib3010 is not getting
ignored by git. This fixes it by adding the 3XXX area to
the according .gitignore file.
Closes#5859
copy the LDFLAGS approach for adding same option with `libhostname` in
`libtest/Makefile.am`:
- init `libstubgss_la_LDFLAGS_EXTRA` variable,
- add option to variable inside conditional,
- use variable in `libstubgss_la_LDFLAGS`
Fixes#5819Closes#5820
Without the -D command line option, checksrc.pl won't know which
directory to load the ".checksrc" file from when building out of the
source tree.
Reported-by: Marcel Raad
Fixes#5715Closes#5755
They're not thread-safe so they should not be used in libcurl code.
Explictly enabled when deemed necessary and in examples and tests
Reviewed-by: Nicolas Sterchele
Closes#5732
Stack overflows can occur with precisions for integers and floats.
Proof of concepts:
- curl_mprintf("%d, %.*1$d", 500, 1);
- curl_mprintf("%d, %+0500.*1$f", 500, 1);
Ideally, compile with -fsanitize=address which makes this undefined
behavior a bit more defined for debug purposes.
The format strings are valid. The overflows occur due to invalid
arguments. If these arguments are variables with contents controlled
by an attacker, the function's stack can be corrupted.
Also see CVE-2016-9586 which partially fixed the float aspect.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Closes https://github.com/curl/curl/pull/5722
timeval::tv_usec might be a 32-bit integer and timespec::tv_nsec might
be a 64-bit integer. This is the case when building for recent macOS
versions, for example. Just treat tv_usec as an int, which should
hopefully always be sufficient on systems with
`HAVE_CLOCK_GETTIME_MONOTONIC`.
Closes https://github.com/curl/curl/pull/5695
Updated terminology in docs, comments and phrases to refer to C strings
as "null-terminated". Done to unify with how most other C oriented docs
refer of them and what users in general seem to prefer (based on a
single highly unscientific poll on twitter).
Reported-by: coinhubs on github
Fixes#5598Closes#5608
Instead of discussing if there's value or meaning (implied or not) in
the colors, let's use words without the same possibly negative
associations.
Closes#5546
... and free it as soon as the transfer is done. It removes the extra
alloc when a new size is set with setopt() and reduces memory for unused
easy handles.
In addition: the closure_handle now doesn't use an allocated buffer at
all but the smallest supported size as a stack based one.
Closes#5472
Since curl_setup.h now makes use of curlx_win32_fopen for Win32
builds with USE_WIN32_LARGE_FILES or USE_WIN32_SMALL_FILES defined,
we need to include the relevant files for tests using fopen,
because the libtest sources are also including curl_setup.h
Reviewed-by: Marcel Raad
Reviewed-by: Daniel Stenberg
Follow up to #3784 (ffdddb45d9)
Closes#5475
- Stick to a single unified way to use structs
- Make checksrc complain on 'typedef struct {'
- Allow them in tests, public headers and examples
- Let MD4_CTX, MD5_CTX, and SHA256_CTX typedefs remain as they actually
typedef different types/structs depending on build conditions.
Closes#5338
The default target should only build libcurl and curl. Add a dedicated
'testdeps' target which will be used later when running tests. Note that
unittests are currently broken in CMake and already excluded.
Closes#5368
OpenSSH for Windows shows group and other/world permissions as *,
because those concepts do not exist on Windows. It also does not
show the current or parent directory, so we just ignore those.
Reviewed-by: Daniel Stenberg
Closes#5328
A common set of functions instead of many separate implementations for
creating buffers that can grow when appending data to them. Existing
functionality has been ported over.
In my early basic testing, the total number of allocations seem at
roughly the same amount as before, possibly a few less.
See docs/DYNBUF.md for a description of the API.
Closes#5300
These were commented out in e9dd099870 when Makefile.inc was included
instead. 11 years have passed since then and the commented code is of
course very outdated. Remove it to avoid confusion.
Closes#5311
Reported by the new script 'scripts/copyright.pl'. The script has a
regex whitelist for the files that don't need copyright headers.
Removed three (mostly usesless) README files from docs/
Closes#5141
When using maximum code optimization level (-O3), valgrind wrongly
detects uses of uninitialized values in strcmp().
Preset buffers with all zeroes to avoid that.
This test does A LOT of *wakeup() calls and then calls curl_multi_poll()
twice. The first *poll() is then expected to return early and the second
not - as the first is supposed to drain the socketpair pipe.
It turns out however that when given "excessive" amounts of writes to
the pipe, some operating systems (the Solaris based are known) will
return EAGAIN before the pipe is drained, which in our test case causes
the second *poll() call to also abort early.
This change attempts to avoid the OS-specific behaviors in the test by
reducing the amount of wakeup calls from 1234567 to 10.
Reported-by: Andy Fiddaman
Fixes#5037Closes#5058
New test 666 checks this is effective.
As upload buffer size is significant in this kind of tests, shorten it
in similar test 652.
Fixes#4860Closes#4833
Reported-by: RuurdBeerstra on github
Input buffer filling may delay the data sending if data reads are slow.
To overcome this problem, file and callback data reads do not accumulate
in buffer anymore. All other data (memory data and mime framing) are
considered as fast and still concatenated in buffer.
As this may highly impact performance in terms of data overhead, an early
end of part data check is added to spare a read call.
When encoding a part's data, an encoder may require more bytes than made
available by a single read. In this case, the above rule does not apply
and reads are performed until the encoder is able to deliver some data.
Tests 643, 644, 645, 650 and 654 have been adapted to the output data
changes, with test data size reduced to avoid the boredom of long lists of
1-byte chunks in verification data.
New test 667 checks mimepost using single-byte read callback with encoder.
New test 668 checks the end of part data early detection.
Fixes#4826
Reported-by: MrdUkk on github
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes#4813
Reported-by: MrdUkk on github
New test 666 checks this is effective.
As upload buffer size is significant in this kind of tests, shorten it
in similar test 652.
Fixes#4860
Reported-by: RuurdBeerstra on github
Input buffer filling may delay the data sending if data reads are slow.
To overcome this problem, file and callback data reads do not accumulate
in buffer anymore. All other data (memory data and mime framing) are
considered as fast and still concatenated in buffer.
As this may highly impact performance in terms of data overhead, an early
end of part data check is added to spare a read call.
When encoding a part's data, an encoder may require more bytes than made
available by a single read. In this case, the above rule does not apply
and reads are performed until the encoder is able to deliver some data.
Tests 643, 644, 645, 650 and 654 have been adapted to the output data
changes, with test data size reduced to avoid the boredom of long lists of
1-byte chunks in verification data.
New test 664 checks mimepost using single-byte read callback with encoder.
New test 665 checks the end of part data early detection.
Fixes#4826
Reported-by: MrdUkk on github
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes#4813
Reported-by: MrdUkk on github
Closes#4833
The alt-svc cache survives a call to curl_easy_reset fine, but the file
name to use for saving the cache was cleared. Now the alt-svc cache has
a copy of the file name to survive handle resets.
Added test 1908 to verify.
Reported-by: Craig Andrews
Fixes#4898Closes#4902
In the "scheme-less" parsing case, we need to strip off credentials
first before we guess scheme based on the host name!
Assisted-by: Jay Satiro
Fixes#4856Closes#4857
- Disable warning C4127 "conditional expression is constant" globally
in curl_setup.h for when building with Microsoft's compiler.
This mainly affects building with the Visual Studio project files found
in the projects dir.
Prior to this change the cmake and winbuild build systems already
disabled 4127 globally for when building with Microsoft's compiler.
Also, 4127 was already disabled for all build systems in the limited
circumstance of the WHILE_FALSE macro which disabled the warning
specifically for while(0). This commit removes the WHILE_FALSE macro and
all other cruft in favor of disabling globally in curl_setup.
Background:
We have various macros that cause 0 or 1 to be evaluated, which would
cause warning C4127 in Visual Studio. For example this causes it:
#define Curl_resolver_asynch() 1
Full behavior is not clearly defined and inconsistent across versions.
However it is documented that since VS 2015 Update 3 Microsoft has
addressed this somewhat but not entirely, not warning on while(true) for
example.
Prior to this change some C4127 warnings occurred when I built with
Visual Studio using the generated projects in the projects dir.
Closes https://github.com/curl/curl/pull/4658
This commit adds curl_multi_wakeup() which was previously in the TODO
list under the curl_multi_unblock name.
On some platforms and with some configurations this feature might not be
available or can fail, in these cases a new error code
(CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup().
Fixes#4418Closes#4608
The URL extracted with CURLINFO_EFFECTIVE_URL was returned as given as
input in most cases, which made it not get a scheme prefixed like before
if the URL was given without one, and it didn't remove dotdot sequences
etc.
Added test case 1907 to verify that this now works as intended and as
before 7.62.0.
Regression introduced in 7.62.0
Reported-by: Christophe Dervieux
Fixes#4491Closes#4493
The 'share object' only sets the storage area for cookies. The "cookie
engine" still needs to be enabled or activated using the normal cookie
options.
This caused the curl command line tool to accidentally use cookies
without having been told to, since curl switched to using shared cookies
in 7.66.0.
Test 1166 verifies
Updated test 506
Fixes#4429Closes#4434
The parser would check for a query part before fragment, which caused it
to do wrong when the fragment contains a question mark.
Extended test 1560 to verify.
Reported-by: Alex Konev
Fixes#4412Closes#4413
CURLU_NO_AUTHORITY is intended for use with unknown schemes (i.e. not
"file:///") to override cURL's default demand that an authority exists.
Closes#4349
It needs to parse correctly. Otherwise it could be tricked into letting
through a-f using host names that libcurl would then resolve. Like
'[ab.be]'.
Reported-by: Thomas Vegas
Closes#4315
This is only the libcurl part that provides the information. There's no
user of the parsed value. This change includes three new tests for the
parser.
Ref: #3794
With CURLOPT_TIMECONDITION set, a header is automatically added (e.g.
If-Modified-Since). Allow this to be replaced or suppressed with
CURLOPT_HTTPHEADER.
Fixes#4103Closes#4109
Codacy/CppCheck warns about this. Consistently use parentheses as we
already do in some places to silence the warning.
Closes https://github.com/curl/curl/pull/3866
... to make the host name "usable". Store the scope id and put it back
when extracting a URL out of it.
Also makes curl_url_set() syntax check CURLUPART_HOST.
Fixes#3817Closes#3822
This limits all accepted input strings passed to libcurl to be less than
CURL_MAX_INPUT_LENGTH (8000000) bytes, for these API calls:
curl_easy_setopt() and curl_url_set().
The 8000000 number is arbitrary picked and is meant to detect mistakes
or abuse, not to limit actual practical use cases. By limiting the
acceptable string lengths we also reduce the risk of integer overflows
all over.
NOTE: This does not apply to `CURLOPT_POSTFIELDS`.
Test 1559 verifies.
Closes#3805
Make sure to run curl_global_cleanup() when shutting down the test
suite to release any resources allocated in the SSL setup. This is
clearly visible when running tests with PolarSSL where the thread
lock calloc() memory which isn't released when not running cleanup.
Below is an excerpt from the autobuild logs:
==12368== 96 bytes in 1 blocks are possibly lost in loss record 1 of 2
==12368== at 0x4837B65: calloc (vg_replace_malloc.c:752)
==12368== by 0x11A76E: curl_dbg_calloc (memdebug.c:205)
==12368== by 0x145CDF: Curl_polarsslthreadlock_thread_setup
(polarssl_threadlock.c:54)
==12368== by 0x145B37: Curl_polarssl_init (polarssl.c:865)
==12368== by 0x14129D: Curl_ssl_init (vtls.c:171)
==12368== by 0x118B4C: global_init (easy.c:158)
==12368== by 0x118BF5: curl_global_init (easy.c:221)
==12368== by 0x118D0B: curl_easy_init (easy.c:299)
==12368== by 0x114E96: test (lib1906.c:32)
==12368== by 0x115495: main (first.c:174)
Closes#3783
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Only allow well formed decimal numbers in the input.
Document that the number MUST be between 1 and 65535.
Add tests to test 1560 to verify the above.
Ref: https://github.com/curl/curl/issues/3753Closes#3762
- remove unused variables
- declare conditionally used variables conditionally
- suppress unused variable warnings in the CMake tests
- remove dead variable stores
- consistently use WIN32 macro to detect Windows
Closes https://github.com/curl/curl/pull/3739
The threaded-shared-conn.c example turned into test case. Only works if
pthread was detected.
An attempt to detect future regressions such as e3a53e3efbCloses#3687
Follow-up to 8eddb8f425.
If the cookieinfo pointer is NULL there really is nothing to save.
Without this fix, we got a problem when a handle was using shared object
with cookies and is told to "FLUSH" it to file (which worked) and then
the share object was removed and when the easy handle was closed just
afterwards it has no cookieinfo and no cookies so it decided to save an
empty jar (overwriting the file just flushed).
Test 1905 now verifies that this works.
Assisted-by: Michael Wallner
Assisted-by: Marcel Raad
Closes#3621
Added Curl_resolver_kill() for all three resolver modes, which only
blocks when necessary, along with test 1592 to confirm
curl_multi_remove_handle() doesn't block unless it must.
Closes#3428Fixes#3371
