- Change the behavior of win32_init so that the required initialization
procedures are not affected by CURL_GLOBAL_WIN32 flag.
libcurl via curl_global_init supports initializing for win32 with an
optional flag CURL_GLOBAL_WIN32, which if omitted was meant to stop
Winsock initialization. It did so internally by skipping win32_init()
when that flag was set. Since then win32_init() has been expanded to
include required initialization routines that are separate from
Winsock and therefore must be called in all cases. This commit fixes
it so that CURL_GLOBAL_WIN32 only controls the optional win32
initialization (which is Winsock initialization, according to our doc).
The only users affected by this change are those that don't pass
CURL_GLOBAL_WIN32 to curl_global_init. For them this commit removes the
risk of a potential crash.
Ref: https://github.com/curl/curl/pull/3573
Fixes https://github.com/curl/curl/issues/3313
Closes https://github.com/curl/curl/pull/3575
... and avoid use of static variables that aren't thread safe.
Fixes regression from e9ababd4f5 (present in the 7.64.0 release)
Reported-by: Paul Groke
Fixes#3572Closes#3573
We use "conn" everywhere to be a pointer to the connection.
Introduces two functions that "attaches" and "detaches" the connection
to and from the transfer.
Going forward, we should favour using "data->conn" (since a transfer
always only has a single connection or none at all) to "conn->data"
(since a connection can have none, one or many transfers associated with
it and updating conn->data to be correct is error prone and a frequent
reason for internal issues).
Closes#3442
curl_multi_wait() was erroneously used from within
curl_easy_perform(). It could lead to it believing there was no socket
to wait for and then instead sleep for a while instead of monitoring the
socket and then miss acting on that activity as swiftly as it should
(causing an up to 1000 ms delay).
Reported-by: Antoni Villalonga
Fixes#3305Closes#3306Closes#3308
When using c-ares for asyn dns, the dns socket fd was silently closed
by c-ares without curl being aware. curl would then 'realize' the fd
has been removed at next call of Curl_resolver_getsock, and only then
notify the CURLMOPT_SOCKETFUNCTION to remove fd from its poll set with
CURL_POLL_REMOVE. At this point the fd is already closed.
By using ares socket state callback (ARES_OPT_SOCK_STATE_CB), this
patch allows curl to be notified that the fd is not longer needed
for neither for write nor read. At this point by calling
Curl_multi_closed we are able to notify multi with CURL_POLL_REMOVE
before the fd is actually closed by ares.
In asyn-ares.c Curl_resolver_duphandle we can't use ares_dup anymore
since it does not allow passing a different sock_state_cb_data
Closes#3238
- replace tabs with spaces where possible
- remove line ending spaces
- remove double/triple newlines at EOF
- fix a non-UTF-8 character
- cleanup a few indentations/line continuations
in manual examples
Closes https://github.com/curl/curl/pull/3037
Add functionality so that protocols can do custom keepalive on their
connections, when an external API function is called.
Add docs for the new options in 7.62.0
Closes#1641
Handles created with curl_easy_duphandle do not use the SSL engine set
up in the original handle. This fixes the issue by storing the engine
name in the internal url state and setting the engine from its name
inside curl_easy_duphandle.
Reported-by: Anton Gerasimov
Signed-of-by: Laurent Bonnans
Fixes#2829Closes#2833
... and trim the threaded Curl_resolver_getsock() to return zero
millisecond wait times during the first three milliseconds so that
localhost or names in the OS resolver cache gets detected and used
faster.
Closes#2685
Especially unpausing a transfer might have to move the socket back to the
"currently used sockets" hash to get monitored. Otherwise it would never get
any more data and get stuck. Easily triggered with pausing using the
multi_socket API.
Reported-by: Philip Prindeville
Bug: https://curl.haxx.se/mail/lib-2018-03/0048.htmlFixes#2393Closes#2391
A mime tree attached to an easy handle using CURLOPT_MIMEPOST is
strongly bound to the handle: there is a pointer to the easy handle in
each item of the mime tree and following the parent pointer list
of mime items ends in a dummy part stored within the handle.
Because of this binding, a mime tree cannot be shared between different
easy handles, thus it needs to be cloned upon easy handle duplication.
There is no way for the caller to get the duplicated mime tree
handle: it is then set to be automatically destroyed upon freeing the
new easy handle.
New test 654 checks proper mime structure duplication/release.
Add a warning note in curl_mime_data_cb() documentation about sharing
user data between duplicated handles.
Closes#2235
Move curl_mime_initpart() and curl_mime_cleanpart() calls to lower-level
functions dealing with UserDefined structure contents.
This avoids memory leakages on curl-generated part mime headers.
New test 2073 checks this using the cli tool --next option: it
triggers a valgrind error if bug is present.
Bug: https://curl.haxx.se/mail/lib-2017-12/0060.html
Reported-by: Martin Galvan
libssh is an alternative library to libssh2.
https://www.libssh.org/
That patch set also introduces support for ECDSA
ed25519 keys, as well as gssapi authentication.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
This bit is no longer used. It is not clear what it meant for users to
"init the TLS" in a world with different TLS backends and since the
introduction of multissl, libcurl didn't properly work if inited without
this bit set.
Not a single user responded to the call for users of it:
https://curl.haxx.se/mail/lib-2017-11/0072.html
Reported-by: Evgeny Grin
Assisted-by: Jay Satiro
Fixes#2089Fixes#2083Closes#2107
... since the 'tv' stood for timeval and this function does not return a
timeval struct anymore.
Also, cleaned up the Curl_timediff*() functions to avoid typecasts and
clean up the descriptive comments.
Closes#2011
... to cater for systems with unsigned time_t variables.
- Renamed the functions to curlx_timediff and Curl_timediff_us.
- Added overflow protection for both of them in either direction for
both 32 bit and 64 bit time_ts
- Reprefixed the curlx_time functions to use Curl_*
Reported-by: Peter Piekarski
Fixes#2004Closes#2005
First: this function is only used in debug-builds and not in
release/real builds. It is used to drive tests using the event-based
API.
A pointer to the local struct is passed to CURLMOPT_TIMERDATA, but the
CURLMOPT_TIMERFUNCTION calback can in fact be called even after this
funtion returns, namely when curl_multi_remove_handle() is called.
Reported-by: Brian Carpenter
... to make all libcurl internals able to use the same data types for
the struct members. The timeval struct differs subtly on several
platforms so it makes it cumbersome to use everywhere.
Ref: #1652Closes#1693
... since the total amount is low this is faster, easier and reduces
memory overhead.
Also, Curl_expire_done() can now mark an expire timeout as done so that
it never times out.
Closes#1472
A) reduces the timeout lists drastically
B) prevents a lot of superfluous loops for timers that expires "in vain"
when it has actually already been extended to fire later on
With -Og, GCC complains:
easy.c:628:7: error: ‘mcode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
../lib/strcase.h:35:29: error: ‘tok_buf’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
vauth/digest.c:208:9: note: ‘tok_buf’ was declared here
../lib/strcase.h:35:29: error: ‘tok_buf’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
vauth/digest.c:566:15: note: ‘tok_buf’ was declared here
Fix this by initializing the variables.
Safe to silence warning adding time delta of poll, which can trigger on
Windows since sizeof time_t > sizeof long.
warning C4244: '+=' : conversion from 'time_t' to 'long', possible loss
of data
When receiving chunked encoded data with trailers, and the write
callback returns PAUSE, there might be both body and header to store to
resend on unpause. Previously libcurl returned error for that case.
Added test case 1540 to verify.
Reported-by: Stephen Toub
Fixes#1354Closes#1357
Replace use of fixed macro BUFSIZE to define the size of the receive
buffer. Reappropriate CURLOPT_BUFFERSIZE to include enlarging receive
buffer size. Upon setting, resize buffer if larger than the current
default size up to a MAX_BUFSIZE (512KB). This can benefit protocols
like SFTP.
Closes#1222
- Call Curl_initinfo on init and duphandle.
Prior to this change the statistical and informational variables were
simply zeroed by calloc on easy init and duphandle. While zero is the
correct default value for almost all info variables, there is one where
it isn't (filetime initializes to -1).
Bug: https://github.com/curl/curl/issues/1103
Reported-by: Neal Poole
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
Previously, passing a timeout of zero to Curl_expire() was a magic code
for clearing all timeouts for the handle. That is now instead made with
the new Curl_expire_clear() function and thus a 0 timeout is fine to set
and will trigger a timeout ASAP.
This will help removing short delays, in particular notable when doing
HTTP/2.
curl_printf.h defines printf to curl_mprintf, etc. This can cause
problems with external headers which may use
__attribute__((format(printf, ...))) markers etc.
To avoid that they cause problems with system includes, we include
curl_printf.h after any system headers. That makes the three last
headers to always be, and we keep them in this order:
curl_printf.h
curl_memory.h
memdebug.h
None of them include system headers, they all do funny #defines.
Reported-by: David Benjamin
Fixes#743
They tend to never get updated anyway so they're frequently inaccurate
and we never go back to revisit them anyway. We document issues to work
on properly in KNOWN_BUGS and TODO instead.
This header file must be included after all header files except
memdebug.h, as it does similar memory function redefinitions and can be
similarly affected by conflicting definitions in system or dependent
library headers.
... for the local variable name in functions holding the return
code. Using the same name universally makes code easier to read and
follow.
Also, unify code for checking for CURLcode errors with:
if(result) or if(!result)
instead of
if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
Coverity detected this. CID 1241954. When Curl_poll() returns a negative value
'mcode' was uninitialized. Pretty harmless since this is debug code only and
would at worst cause an error to _not_ be returned...
As this makes curl_global_init_mem() behave the same way as
curl_global_init() already does in that aspect - the same number of
curl_global_cleanup() calls is then required to again decrease the
counter and then eventually do the cleanup.
Bug: http://curl.haxx.se/bug/view.cgi?id=1362
Reported-by: Tristan
Commit 7d80ed64e4 introduced some helpers to handle
sigpipe in easy.c. However, that fix was incomplete, and we
need to add more callers in other files. The first step is
making the helpers globally accessible.
Since the functions are small and should generally end up
inlined anyway, we simply define them in the header as
static functions.
Signed-off-by: Jeff King <peff@peff.net>
'struct monitor', introduced in 6cf8413e, already exists in an IRIX
header file (sys/mon.h) which gets included via various standard headers
by lib/easy.c
cc-1101 cc: ERROR File = ../../curl/lib/easy.c, Line = 458
"monitor" has already been declared in the current scope.
Reported-by: Tor Arntsen
When waiting for a 100-continue response from the server, the
Curl_readwrite() will refuse to run if called until the timeout has been
reached.
We timeout code in multi_socket() allows code to run slightly before the
actual timeout time, so for test 154 it could lead to the function being
executed but refused in Curl_readwrite() and then the application would
just sit idling forever.
This was detected with runtests.pl -e on test 154.
This function is meant to work *exactly* as curl_easy_perform() but will
use the event-based libcurl API internally instead of
curl_multi_perform(). To avoid relying on an actual event-based library
and to not use non-portable functions (like epoll or similar), there's a
rather inefficient emulation layer implemented on top of Curl_poll()
instead.
There's currently some convenience logging done in curl_easy_perform_ev
which helps when tracking down problems. They may be suitable to remove
or change once things seem to be fine enough.
curl has a new --test-event option when built with debug enabled that
then uses curl_easy_perform_ev() instead of curl_easy_perform(). If
built without debug, using --test-event will only output a warning
message.
NOTE: curl_easy_perform_ev() is not part if the public API on purpose.
It is only present in debug builds of libcurl and MUST NOT be considered
stable even then. Use it for libcurl-testing purposes only.
runtests.pl now features an -e command line option that makes it use
--test-event for all curl command line tests. The man page is updated.
Moved Curl_easy_addmulti() from easy.c to multi.c, renamed it to
easy_addmulti and made it static.
Removed Curl_easy_initHandleData() and uses of it since it was emptied
in commit cdda92ab67b47d74a.
All protocol handler structs are now opaque (void *) in the
SessionHandle struct and moved in the request-specific sub-struct
'SingleRequest'. The intension is to keep the protocol specific
knowledge in their own dedicated source files [protocol].c etc.
There's some "leakage" where this policy is violated, to be addressed at
a later point in time.
1 - always allocate the struct in protocol->setup_connection. Some
protocol handlers had to get this function added.
2 - always free at the end of a request. This is also an attempt to keep
less memory in the handle after it is completed.
Instead of going 50,100,150 etc millisecond delay time when nothing has
been found to do or wait for, we now start lower and double each loop as
in 4,8,16,32 etc.
This lowers the minimum wait without sacrifizing the longer wait too
much with unnecessary CPU cycles burnt.
Bug: http://curl.haxx.se/mail/lib-2013-07/0103.html
Reported-by: Andreas Malzahn
This reverts commit 7ed25cc, reinstating commit 8ec2cb5.
As of 18-jul-2013 we still do have code in libcurl that makes use of these
memory functions. Commit 8ec2cb5 comment still applies and is yet valid.
These memory functions are solely used in Windows builds, so all related
code is protected with '#ifdef WIN32' preprocessor conditional compilation
directives.
Specifically, wcsdup() _wcsdup() are used when building a Windows target with
UNICODE and USE_WINDOWS_SSPI preprocessor symbols defined. This is the case
when building a Windows UNICODE target with Windows native SSL/TLS support
enabled.
Realizing that wcsdup() _wcsdup() are used is a bit tricky given that usage
of these is hidden behind _tcsdup() which is MS way of dealing with code
that must tolerate UNICODE and non-UNICODE compilation. Additionally, MS
header files and those compatible from other compilers use this preprocessor
conditional compilation directive in order to select at compilation time
whether 'wide' or 'ansi' MS API functions are used.
Without this code, Windows build targets with Windows native SSL/TLS support
enabled and MemoryTracking support enabled misbehave in tracking memory usage,
regardless of being a UNICODE enabled build or not.
When doing multi-part formposts, libcurl used a pseudo-random value that
was seeded with time(). This turns out to be bad for users who formpost
data that is provided with users who then can guess how the boundary
string will look like and then they can forge a different formpost part
and trick the receiver.
My advice to such implementors is (still even after this change) to not
rely on the boundary strings being cryptographically strong. Fix your
code and logic to not depend on them that much!
I moved the Curl_rand() function into the sslgen.c source file now to be
able to take advantage of the SSL library's random function if it
provides one. If not, try to use the RANDOM_FILE for seeding and as a
last resort keep the old logic, just modified to also add microseconds
which makes it harder to properly guess the exact seed.
The formboundary() function in formdata.c is now using 64 bit entropy
for the boundary and therefore the string of dashes was reduced by 4
letters and there are 16 hex digits following it. The total length is
thus still the same.
Bug: http://curl.haxx.se/bug/view.cgi?id=1251
Reported-by: "Floris"
Follow-up fix from 7d80ed64e4.
The SessionHandle may not be around to use when we restore the sigpipe
sighandler so we store the no_signal boolean in the local struct to know
if/how to restore.
... and restore the ordinary handling again when it returns. This is
done for curl_easy_perform() and curl_easy_cleanup() only for now - and
only when built to use OpenSSL as backend as this is the known culprit
for the spurious SIGPIPEs people have received.
Bug: http://curl.haxx.se/bug/view.cgi?id=1180
Reported by: Lluís Batlle i Rossell
When curl_multi_wait() finds no file descriptor to wait for, it returns
instantly and this must be handled gracefully within curl_easy_perform()
or cause a busy-loop. Starting now, repeated fast returns without any
file descriptors is detected and a gradually increasing sleep will be
used (up to a max of 1000 milliseconds) before continuing the loop.
Bug: http://curl.haxx.se/bug/view.cgi?id=1238
Reported-by: Miguel Angel
This reverts commit 8ec2cb5544.
We don't have any code anywhere in libcurl (or the curl tool) that use
wcsdup so there's no such memory use to track. It seems to cause mild
problems with the Borland compiler though that we may avoid by reverting
this change again.
Bug: http://curl.haxx.se/mail/lib-2013-05/0070.html
By introducing an internal alternative to curl_multi_init() that accepts
parameters to set the hash sizes, easy handles will now use tiny socket
and connection hash tables since it will only ever add a single easy
handle to that multi handle.
This decreased the number mallocs in test 40 (which is a rather simple
and typical easy interface use case) from 1142 to 138. The maximum
amount of memory allocated used went down from 118969 to 78805.
