This is primarily interesting for cases where CURLOPT_NOBODY is set as
previously curl would not return an error for this case.
MDTM getting 550 now also returns this error (it returned
CURLE_FTP_COULDNT_RETR_FILE before) in order to unify return codes for
missing files across protocols and specific FTP commands.
libcurl already returns error on a 550 as a MDTM response (when
CURLOPT_FILETIME is set). If CURLOPT_NOBODY is not set, an error would
happen subsequently anyway since the RETR command would fail.
Add test 1913 and 1914 to verify. Updated several tests accordingly due
to the updated SIZE behavior.
Reported-by: Tomas Berger
Fixes#5953Closes#5957
A shared connection cache is not thread-safe is a known issue. Stop
testing this until we believe this issue is addressed. Reduces
occasional test failures we don't care about.
The test code in lib1541.c is left in git to allow us to restore it when
we get to fix this.
Closes#5922
Remove the tests 530, 584, 1900, 1901, 1902, 1903 and 2033. They were
previously disabled.
The Pipelining code was removed from curl in commit 2f44e94efb,
April 2019.
Closes#5921
const struct curl_easyoption *curl_easy_option_by_name(const char *name);
const struct curl_easyoption *curl_easy_option_by_id (CURLoption id);
const struct curl_easyoption *
curl_easy_option_next(const struct curl_easyoption *prev);
The purpose is to provide detailed enough information to allow for
example libcurl bindings to get option information at run-time about
what easy options that exist and what arguments they expect.
Assisted-by: Jeroen Ooms
Closes#5365
include zstd curl patch for Makefile.m32 from vszakats
and include Add CMake support for zstd from Peter Wu
Helped-by: Viktor Szakats
Helped-by: Peter Wu
Closes#5453
When the method is updated inside libcurl we must still not change the
method as set by the user as then repeated transfers with that same
handle might not execute the same operation anymore!
This fixes the libcurl part of #5462
Test 1633 added to verify.
Closes#5499
They're only limited to the maximum string input restrictions, not to
256 bytes.
Added test 1178 to verify
Reported-by: Will Roberts
Fixes#5448Closes#5449
Added test 971 to verify that the list is in sync with the files in
cmdline-opts. The check also verifies that .d-files that uses Added:
specify the same version number as the options-in-versions file does.
Closes#5381
Prior to this change if there was a 303 reply to a PUT request then
the subsequent request to respond to that redirect would also be a PUT.
It was determined that was most likely incorrect based on the language
of the RFCs. Basically 303 means "see other" resource, which implies it
is most likely not the same resource, therefore we should not try to PUT
to that different resource.
Refer to the discussions in #5237 and #5248 for more information.
Fixes https://github.com/curl/curl/issues/5237
Closes https://github.com/curl/curl/pull/5248
test1294: "split request" being when the entire request isn't sent in
the first go, and the remainder is sent in the PERFORM state. A GET
request is otherwise not sending anything during PERFORM.
test1295: same kind of split but with POST
Closes#5197
This change inverse the order of processing for the --etag-compare and
--etag-save option to process first --etag-compare. This in turn allows
to use the same file name to compare and save an etag.
The original behavior of not failing if the etag file does not exists is
conserved.
Fixes#5179Closes#5180
- Implement new option CURLSSLOPT_REVOKE_BEST_EFFORT and
--ssl-revoke-best-effort to allow a "best effort" revocation check.
A best effort revocation check ignores errors that the revocation check
was unable to take place. The reasoning is described in detail below and
discussed further in the PR.
---
When running e.g. with Fiddler, the schannel backend fails with an
unhelpful error message:
Unknown error (0x80092012) - The revocation function was unable
to check revocation for the certificate.
Sadly, many enterprise users who are stuck behind MITM proxies suffer
the very same problem.
This has been discussed in plenty of issues:
https://github.com/curl/curl/issues/3727,
https://github.com/curl/curl/issues/264, for example.
In the latter, a Microsoft Edge developer even made the case that the
common behavior is to ignore issues when a certificate has no recorded
distribution point for revocation lists, or when the server is offline.
This is also known as "best effort" strategy and addresses the Fiddler
issue.
Unfortunately, this strategy was not chosen as the default for schannel
(and is therefore a backend-specific behavior: OpenSSL seems to happily
ignore the offline servers and missing distribution points).
To maintain backward-compatibility, we therefore add a new flag
(`CURLSSLOPT_REVOKE_BEST_EFFORT`) and a new option
(`--ssl-revoke-best-effort`) to select the new behavior.
Due to the many related issues Git for Windows and GitHub Desktop, the
plan is to make this behavior the default in these software packages.
The test 2070 was added to verify this behavior, adapted from 310.
Based-on-work-by: georgeok <giorgos.n.oikonomou@gmail.com>
Co-authored-by: Markus Olsson <j.markus.olsson@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes https://github.com/curl/curl/pull/4981
Makes curl_easy_getinfo() of "variable" numerical content instead return
the number set in the env variable `CURL_TIME`.
Makes curl_version() of "variable" textual content. This guarantees a
stable version string which can be tested against. Environment variable
`CURL_VERSION` defines the content.
Assisted-by: Mathias Gumz
New test 666 checks this is effective.
As upload buffer size is significant in this kind of tests, shorten it
in similar test 652.
Fixes#4860Closes#4833
Reported-by: RuurdBeerstra on github
Input buffer filling may delay the data sending if data reads are slow.
To overcome this problem, file and callback data reads do not accumulate
in buffer anymore. All other data (memory data and mime framing) are
considered as fast and still concatenated in buffer.
As this may highly impact performance in terms of data overhead, an early
end of part data check is added to spare a read call.
When encoding a part's data, an encoder may require more bytes than made
available by a single read. In this case, the above rule does not apply
and reads are performed until the encoder is able to deliver some data.
Tests 643, 644, 645, 650 and 654 have been adapted to the output data
changes, with test data size reduced to avoid the boredom of long lists of
1-byte chunks in verification data.
New test 667 checks mimepost using single-byte read callback with encoder.
New test 668 checks the end of part data early detection.
Fixes#4826
Reported-by: MrdUkk on github
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes#4813
Reported-by: MrdUkk on github
New test 666 checks this is effective.
As upload buffer size is significant in this kind of tests, shorten it
in similar test 652.
Fixes#4860
Reported-by: RuurdBeerstra on github
Input buffer filling may delay the data sending if data reads are slow.
To overcome this problem, file and callback data reads do not accumulate
in buffer anymore. All other data (memory data and mime framing) are
considered as fast and still concatenated in buffer.
As this may highly impact performance in terms of data overhead, an early
end of part data check is added to spare a read call.
When encoding a part's data, an encoder may require more bytes than made
available by a single read. In this case, the above rule does not apply
and reads are performed until the encoder is able to deliver some data.
Tests 643, 644, 645, 650 and 654 have been adapted to the output data
changes, with test data size reduced to avoid the boredom of long lists of
1-byte chunks in verification data.
New test 664 checks mimepost using single-byte read callback with encoder.
New test 665 checks the end of part data early detection.
Fixes#4826
Reported-by: MrdUkk on github
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes#4813
Reported-by: MrdUkk on github
Closes#4833
When doing a request with a body + Expect: 100-continue and the server
responds with a 417, the same request will be retried immediately
without the Expect: header.
Added test 357 to verify.
Also added a control instruction to tell the sws test server to not read
the request body if Expect: is present, which the new test 357 uses.
Reported-by: bramus on github
Fixes#4949Closes#4964
Note: The RCPT TO command isn't required to advertise to the server that
it contains UTF-8 characters, instead the server is told that a mail may
contain UTF-8 in any envelope command via the MAIL command.
Support the SMTPUTF8 extension when sending mailbox information in the
MAIL command (FROM and AUTH parameters). Non-ASCII domain names will
be ACE encoded, if IDN is supported, whilst non-ASCII characters in
the local address part are passed to the server.
Reported-by: ygthien on github
Fixes#4828
The alt-svc cache survives a call to curl_easy_reset fine, but the file
name to use for saving the cache was cleared. Now the alt-svc cache has
a copy of the file name to survive handle resets.
Added test 1908 to verify.
Reported-by: Craig Andrews
Fixes#4898Closes#4902
... as this is already done much earlier in the URL parser.
Also add test case 894 that verifies that pop3 with an encodedd CR in
the user name is rejected.
Closes#4887
Previously it would end up with an uninitialized memory buffer that
would lead to a crash or junk getting output.
Added test 1271 to verify.
Reported-by: Brian Carpenter
Closes#4786
This commit adds curl_multi_wakeup() which was previously in the TODO
list under the curl_multi_unblock name.
On some platforms and with some configurations this feature might not be
available or can fail, in these cases a new error code
(CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup().
Fixes#4418Closes#4608
Regression from e59371a493 (7.67.0)
Added test 490, 491 and 492 to verify the functionality.
Reported-by: Kamil Dudka
Reported-by: Anderson Sasaki
Fixes#4588Closes#4591
The URL extracted with CURLINFO_EFFECTIVE_URL was returned as given as
input in most cases, which made it not get a scheme prefixed like before
if the URL was given without one, and it didn't remove dotdot sequences
etc.
Added test case 1907 to verify that this now works as intended and as
before 7.62.0.
Regression introduced in 7.62.0
Reported-by: Christophe Dervieux
Fixes#4491Closes#4493
The 'share object' only sets the storage area for cookies. The "cookie
engine" still needs to be enabled or activated using the normal cookie
options.
This caused the curl command line tool to accidentally use cookies
without having been told to, since curl switched to using shared cookies
in 7.66.0.
Test 1166 verifies
Updated test 506
Fixes#4429Closes#4434
Added unit test case 1655 to verify.
Close#4352
the code correctly finds the flaws in the old code,
if one temporarily restores doh.c to the old version.
This is a protocol violation but apparently there are legacy proprietary
servers doing this.
Added test 336 and 337 to verify.
Reported-by: Philippe Marguinaud
Closes#4339
When a username and password are provided in the URL, they were wrongly
removed from the stored URL so that subsequent uses of the same URL
wouldn't find the crendentials. This made doing HTTP auth with multiple
connections (like Digest) mishave.
Regression from 46e164069d (7.62.0)
Test case 335 added to verify.
Reported-by: Mike Crowe
Fixes#4228Closes#4229
This is only the libcurl part that provides the information. There's no
user of the parsed value. This change includes three new tests for the
parser.
Ref: #3794
As the plan has been laid out in DEPRECATED. Update docs accordingly and
verify in test 1174. Now requires the option to be set to allow HTTP/0.9
responses.
Closes#4191
If HTTPAUTH_GSSNEGOTIATE was used for a POST request and
gss_init_sec_context() failed, the POST request was sent
with empty body. This commit also restores the original
behavior of `curl --fail --negotiate`, which was changed
by commit 6c60355323.
Add regression tests 2077 and 2078 to cover this.
Fixes#3992Closes#4171
... to avoid integer overflows later when multiplying with 1000 to
convert seconds to milliseconds.
Added test 1269 to verify.
Reported-by: Jason Lee
Closes#4166
The testcase ensures that redirects to CURLPROTO_GOPHER won't be
allowed, by default, in the future. Also, curl is being used
for convenience while keeping the testcases DRY.
The expected error code is CURLE_UNSUPPORTED_PROTOCOL when the client is
redirected to CURLPROTO_GOPHER
Signed-off-by: Linos Giannopoulos <lgian@skroutz.gr>
With CURLOPT_TIMECONDITION set, a header is automatically added (e.g.
If-Modified-Since). Allow this to be replaced or suppressed with
CURLOPT_HTTPHEADER.
Fixes#4103Closes#4109
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72ca9499ff8c1cc36c2a8d520edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a13.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2f.
