The linux kernel does not report all ICMP errors back to userspace due
to historical reasons.
IP*_RECVERR sockopt must be turned on to have the correct behaviour
which is to pass all ICMP errors to userspace.
See https://bugzilla.kernel.org/show_bug.cgi?id=202355Closes#6341
When the initial request isn't possible to send in its entirety, the
remainder of request would be delivered to the debug callback as data
and would wrongly be counted internally as body-bytes sent.
Extended test 1295 to verify.
Closes#6328
When failing in TOOFAST, the multi_done() wasn't called so the same
cleanup and handling wasn't done like when it fails in PERFORM, which in
the case of FTP could mean that the control connection wouldn't be
marked as "dead" for the CURLE_ABORTED_BY_CALLBACK case. Which caused
ftp_disconnect() to use it to send "QUIT", which could end up waiting
for a response a long time before giving up!
Reported-by: Tomas Berger
Fixes#6333Closes#6337
This commit introduces a "gophers" handler inside the gopher protocol if
USE_SSL is defined. This protocol is no different than the usual gopher
prococol, with the added TLS encapsulation upon connecting. The protocol
has been adopted in the gopher community, and many people have enabled
TLS in their gopher daemons like geomyidae(8), and clients, like clic(1)
and hurl(1).
I have not implemented test units for this protocol because my knowledge
of Perl is sub-par. However, for someone more knowledgeable it might be
fairly trivial, because the same test that tests the plain gopher
protocol can be used for "gophers" just by adding a TLS listener.
Signed-off-by: parazyd <parazyd@dyne.org>
Closes#6208
The error is shown with infof rather than failf so that the user will
see the extended error message information only in verbose mode, and
will still see the standard CURLE_AUTH_ERROR message. For example:
---
* schannel: InitializeSecurityContext failed: SEC_E_QOP_NOT_SUPPORTED
(0x8009030A) - The per-message Quality of Protection is not supported by
the security package
* multi_done
* Connection #1 to host 127.0.0.1 left intact
curl: (94) An authentication function returned an error
---
Ref: https://github.com/curl/curl/issues/6302
Closes https://github.com/curl/curl/pull/6315
If supported, defer port selection until connect() time
if --interface is given and source port is 0.
Reproducer:
* start fast webserver on port 80
* starve system of ephemeral ports
$ sysctl net.ipv4.ip_local_port_range="60990 60999"
* start a curl/libcurl "crawler"
$curl --keepalive --parallel --parallel-immediate --head --interface
127.0.0.2 "http://127.0.0.[1-254]/file[001-002].txt"
current result:
(possible some successful data)
curl: (45) bind failed with errno 98: Address already in use
result after patch:
(complete success or few connections failing, higlhy depending on load)
Fail only when all the possible 4-tuple combinations are exhausted,
which is impossible to do when port is selected at bind() time becuse
the kernel does not know if socket will be listen()'ed on or connect'ed
yet.
Closes#6295
Valgrind will complain that ssrem buffer usage if not explicit
initialized, hence initialize it to zero.
This completes the change intially started in commit 2c0d721215 ('ftp:
retry getpeername for FTP with TCP_FASTOPEN') where the ssloc buffer has
a similar memset to zero.
Signed-off-by: Hans-Christian Noren Egtvedt <hegtvedt@cisco.com>
Closes#6289
The command line tool also independently sets --ftp-skip-pasv-ip by
default.
Ten test cases updated to adapt the modified --libcurl output.
Bug: https://curl.se/docs/CVE-2020-8284.html
CVE-2020-8284
Reported-by: Varnavas Papaioannou
... as it makes the URL parser accept "very-long-hostname://" as a valid
host name and we don't want that. The parser now only accepts a blank
(no digits) after the colon if the URL starts with a scheme.
Reported-by: d4d on hackerone
Closes#6283
This reverts commit d2a7d7c185.
This commit also reverts the subsequent follow-ups to that commit, which
were all done within windows #ifdefs that are removed in this
change. Marc helped me verify this.
Fixes#6146Closes#6281
In the case of TFO, the remote host name is not resolved at the
connetion time.
For FTP that has lead to missing hostname for the secondary connection.
Therefore the name resolution is done at the time, when FTP requires it.
Fixes#6252Closes#6265Closes#6282
This field needs to be wide enough to hold sockaddr_in6 when
connecting via IPv6. Otherwise, ngtcp2_conn_read_pkt will drop the
packets because of the address mismatch:
I00000022 [...] con ignore packet from unknown path
We can safely assume that struct sockaddr_storage is available, as it
is used in the public interface of ngtcp2.
Closes#6250
The resolve call is done with the right port number, but the subsequent
check used the wrong one, which then could find a previous resolve which
would return and leave the fresh resolve "incomplete" and leaking
memory.
Fixes#6247Closes#6253
file_disconnect() is identical with file_do() except the function header
but as the arguments are unused anyway so why not just return file_do()
directly!
Reviewed-by: Daniel Stenberg
Closes#6249
The function has been removed from common usage. Also removed comment in
gopher.c that still referenced it.
Reported-by: Rikard Falkeborn
Fixes#6242Closes#6243
To reduce use of types that can't be checked at compile time. Also
removes several typecasts.
... and rename the struct field from 'os_specific' to 'tdata'.
Closes#6239
Reviewed-by: Jay Satiro
EVP_MD_CTX_create will allocate memory for the context and returns
NULL in case the allocation fails. Make sure to catch any allocation
failures and exit early if so.
In passing, also move to EVP_DigestInit rather than EVP_DigestInit_ex
as the latter is intended for ENGINE selection which we don't do.
Closes#6224
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Emil Engler <me@emilengler.com>
curl CMake was setting the the EXE flags for static libraries which made
the /manifest:no flag ended up when linking the static library, which is
not a valid flag for lib.exe or llvm-lib.exe and caused llvm-lib to exit
with an error.
The better way to handle this is to make sure that we pass the correct
linker flags to CMAKE_STATIC_LINKER_FLAGS instead.
Reviewed-by: Jakub Zakrzewski
Closes#6195
... instead of the limiting it to just the max input size. As every
input byte can be expanded to 3 output bytes, this could limit the input
string to 2.66 MB instead of the intended 8 MB.
Reported-by: Marc Schlatter
Closes#6192
By setting the speed limit time stamps unconditionally at transfer
start, we can start off a transfer without speed limits and yet allow
them to get set during transfer and have an effect.
Reported-by: Kael1117 on github
Fixes#6162Closes#6184
The line variable will always be NULL in the error path, so remove
the free call since it's pointless.
Closes#6170
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- enable in the build (configure)
- header parsing
- host name lookup
- unit tests for the above
- CI build
- CURL_VERSION_HSTS bit
- curl_version_info support
- curl -V output
- curl-config --features
- CURLOPT_HSTS_CTRL
- man page for CURLOPT_HSTS_CTRL
- curl --hsts (sets CURLOPT_HSTS_CTRL and works with --libcurl)
- man page for --hsts
- save cache to disk
- load cache from disk
- CURLOPT_HSTS
- man page for CURLOPT_HSTS
- added docs/HSTS.md
- fixed --version docs
- adjusted curl_easy_duphandle
Closes#5896
... when the chunked framing was added, the size of the "body part" of
the data was calculated wrongly so the debug callback would get told a
header chunk a few bytes too big that would also contain the first few
bytes of the request body.
Reported-by: Dirk Wetter
Ref: #6144Closes#6147
Build breaks because the http_proxy field is missing:
vssh/libssh2.c:3119:10: error: 'struct connectdata' has no member named 'http_proxy'
Regression from #6021, shipped in curl 7.73.0
Closes#6125
* fix two build errors due to mismatch between function
declarations and their definitions
* silence two mismatched signs warnings via casts
Approved-by: Daniel Stenberg
Closes#6093
... and remove the objnames scripts they tested. They're not used for
anything anymore so testing them serves no purpose!
Reported-by: Marc Hörsken
Fixes#6080Closes#6081
- Change get_winapi_error() to return the error string in the local
codepage instead of UTF-8 encoding.
Two weeks ago bed5f84 fixed get_winapi_error() to work on xbox, but it
also changed the error string's encoding from local codepage to UTF-8.
We return the local codepage version of the error string because if it
is output to the user's terminal it will likely be with functions which
expect the local codepage (eg fprintf, failf, infof).
This is essentially a partial revert of bed5f84. The support for xbox
remains but the error string is reverted back to local codepage.
Ref: https://github.com/curl/curl/pull/6005
Reviewed-by: Marcel Raad
Closes#6065
Whitespace is spelled without a space between white and space, so
make sure to consistently spell it that way across the codebase.
Closes#6023
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Emil Engler <me@emilengler.com>
There used to be a way to have memdebug fill allocated memory. 9 years
later this has no value there (valgrind and ASAN etc are way better). If
people need to know about it they can have a look at VCS logs.
Closes#5973
This matches what is returned in other TLS backends in the same
situation.
Reviewed-by: Jay Satiro
Reviewed-by: Emil Engler
Follow-up to 5a3efb1
Reported-by: iammrtau on github
Fixes#6003Closes#6018
Added test 348 to verify. Added a 'STOR' command to the test FTP
server to enable test 348. Documented the command in FILEFORMAT.md
Reported-by: Duncan Wilcox
Fixes#6016Closes#6017
