Verify that the "Saved to filename 'blabla'" message is only displayed when
the 'blabla' filename being used _actually_ has been specified by the server
in the Content-Disposition header.
Use relative path for unintended file creation postcheck.
When a <file> part is now specified with no contents at all, this
will actually verify that the specified file has no contents at all.
Previously file contents would be ignored.
This is done introducing tags <file1> to <file4> besides existing <file> one,
as well as corresponding <stripfile1> to <stripfile4> ones, that can be used
in the <verify> section in the same way as the non-numbered ones.
Introduce SUPPORTCAPA and SUPPORTAUTH config commands to allow further
pop3 test server expansion for tests that require CAPA or AUTH support,
although this will need some extra work to make it fully functional.
Added support for detecting the supported SASL authentication mechanisms
via the AUTH command. There are two ways of detecting them, either by
using the AUTH command, that will return -ERR if not supported or by
using the CAPA command which will return SASL and the list of mechanisms
if supported, not include SASL if SASL authentication is not supported
or -ERR if the CAPA command is not supported. As such it seems simpler
to use the AUTH command and fallback to normal clear text authentication
if the the command is not supported.
Additionally updated the test cases to return -ERR when the AUTH command
is encountered. Additional test cases will be added when support for the
individual authentication mechanisms is added.
To achieve this, first new structure HeaderData is defined to hold
necessary data to perform header-related work. Then tool_header_cb now
receives HeaderData pointer as userdata. All header-related work
(currently, dumping header and Content-Disposition inspection) are done
in this callback function. HeaderData.outs->config is used to determine
whether each work is done.
Unit tests were also updated because after this change, curl code always
sets CURLOPT_HEADERFUNCTION and CURLOPT_HEADERDATA.
Tested with -O -J -D, -O -J -i and -O -J -D -i and all worked fine.
When doing a chunked-encoded POST with -d (CURLOPT_POSTFIELDS) and the
size of the POST was zero length, it made libcurl first send a zero
chunk and then the terminating one. This could confuse a receiver and it
should rather just send the terminating chunk as it does with this fix.
Test case 1333 is added to verify.
Bug: http://curl.haxx.se/mail/archive-2012-04/0060.html
Reported by: Arnaud Compan
Explicit conversion to 'long' of curl_easy_setopt() third argument for options
CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH given that this is how its bitmasks are
docummented to be used.
configure script now provides conditional definitions for Makefile.am
that result in CURL_HIDDEN_SYMBOLS being defined by resulting makefiles
when appropriate.
Additionally, configure script option for symbol hiding control is now
named --enable-symbol-hiding --disable-symbol-hiding. While still valid,
old option name --enable-hidden-symbols --disable-hidden-symbols will
be deprecated in some future release.
BUILDING_LIBCURL and CURL_STATICLIB are no longer defined in curl_config.h,
configure will generate appropriate conditionals so that mentioned symbols
get defined and used in Makefiles at compilation time
Don't set the "has_openssl" variable if yassl or polarssl is found as
they will simply not work as 100% drop-in replacements for some of the
stuff the "OpenSSL" feature is used for.
I spotted this problem when doing test runs with PolarSSL builds.
With FOLLOWLOCATION enabled. When a 3xx page is downloaded and the
download size was known (like with a Content-Length header), but the
subsequent URL (transfered after the 3xx page) was chunked encoded, then
the previous "known download size" would linger and cause the progress
meter to get incorrect information, ie the former value would remain
being sent in. This could easily result in downloads that were WAY
larger than "expected" and would cause >100% outputs with the curl
command line tool.
Test case 599 was created and it was used to repeat the bug and then
verify the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3510057
Reported by: Michael Wallner
The line endings broke when I saved the three recent patches (my fault,
not Colin's) to 'git am' them.
Adjusted the stripping of the test program for comparing to also exclude
the SSH key file name as that will differ and use a local path name.
The intention is to take the output of curl's --libcurl option,
as exercised in test 14xx, and generate a corresponding test15xx
in which the generated code is compiled and run. This will verify
that the generated code behaves equivalently to the original
invocation of the curl command.
The script is not yet integrated into the configure / makefile
machinery.
With commit 035ef06bda applied, the test pop3 server needs to send
".\r\n" as the body terminating sequence and there needs to be a final
CRLF in the actual body in the test data file.
The proxy parser function strips off trailing slashes off the proxy name
which could lead to a mistaken zero length proxy name which would be
treated as no proxy at all by subsequent functions!
This is now detected and an error is returned. Verified by the new test
1329.
Reported by: Chandrakant Bagul
Bug: http://curl.haxx.se/mail/lib-2012-02/0000.html
When CURLOPT_REFERER has been used, curl_easy_reset() did not properly
clear it.
Verified with the new test 598
Bug: http://curl.haxx.se/bug/view.cgi?id=3481551
Reported by: Michael Day
We want to continue to the next URL to try even on failures returned
from libcurl. This makes -f with ranges still get subsequent URLs even
if occasional ones return error. This was a regression as it used to
work and broke in the 7.23.0 release.
Added test case 1328 to verify the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3481223
Reported by: Juan Barreto
Allows tests from the libtest subdir to generate log traces
similar to those of curl with --tracetime and --trace-ascii
options but with output going to stderr.
make 'pidfile' and 'logfile' options appear first on command line in order
to ensure that processing of other options which write to logfile do this
to intended file and not the default one.
There's a new 'http-proxy' server for tests that runs on a separate port
and lets clients do HTTP CONNECT to other ports on the same host to
allow us to test HTTP "tunneling" properly.
Test cases now have a <proxy> section in <verify> to check that the
proxy protocol part matches correctly.
Test case 80, 83, 95, 275, 503 and 1078 have been converted. Test 1316
was added.
When a HTTP connection is re-used for a subsequent request without
proxy, it would always re-use the Host: header of the first request. As
host names are case insensitive it would make curl send another host
name case that what the particular request used.
Now it will instead always use the most recent host name to always use
the desired casing.
Added test case 1318 to verify.
Bug: http://curl.haxx.se/mail/lib-2011-12/0314.html
Reported by: Alex Vinnik
Initial step in order to allow our pingpong server to better support arbitrary
application data splitting among TCP packets. This first commit only addresses
reasembly of data that sockfilter processes reads from soockets and pingpong
server later reads from sockfilters stdout.
Make testcurl.pl ignore messages pertaining to third party m4 files we don't
care nor use on a file basis policy while retaining all other warnings.
This closes temporary commit e71e226f
1- Two new error codes are introduced.
CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of
FTP server connected.
CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts.
Neither of these errors are considered fatal and control connection
remains OK because it could just be a firewall blocking server to
connect to the client.
2- One new setopt option was introduced.
CURLOPT_ACCEPTTIMEOUT_MS
It sets the maximum amount of time FTP client is going to wait for a
server to connect. Internal default accept timeout is 60 seconds.
As commit ce896875f8 fixed a timer that accidentally had been moved in
code and then returned a bad timer, the lib500.c code (used in test 500
and some others) now verifies 5 timers against each other to verify that
they have the correct relative values. We cannot compare against
absolute values as the timings will vary a lot.
Test case 1315 was added to verify this functionality. When passing in
multiple files to a single -F, the parser would get all confused if one
of the specified files had a custom type= assigned.
Reported by: Colin Hogben
Keep track of which sockets that are the result of accept() calls and
refuse to call the closesocket callback for those sockets. Test case 596
now verifies that the open socket callback is called the same number of
times as the closed socket callback for active FTP connections.
Bug: http://curl.haxx.se/mail/lib-2011-12/0018.html
Reported by: Gokhan Sengun
When the new socket is created for an active connection, it is now done
using the open socket callback.
Test case 596 was modified to run fine, although it hides the fact that
the close callback is still called too many times, as it also gets
called for closing sockets that were created with accept().
Previously the log function would just filter out all CR and LF
occurances from the log to make it more readable. This had the downside
that it made it very hard to see CR LFs when they actually matters.
Now, they're instead converted to "[CR]" and "[LR]" in the log to become
apparent to readers.
Curl_pop3_write() now has a state machine that scans for the end of a
POP3 body so that the CR LF '.' CR LF sequence can come in everything
from one up to five subsequent packets.
Test case 810 is modified to use SLOWDOWN which makes the server pause
between each single byte and thus makes the POP3 body get sent to curl
basically one byte at a time.
"Active FTP hangs if server does not open data connection"
The server first sends a 150 and then when libcurl waits for the data
transfer, the server sends a 425.
The protocol parts for these tests do not include QUIT simply because
the error is CURLE_OPERATION_TIMEDOUT (28) which is a generic timeout
error without specificly saying for which connection it concerns, and
for timeouts libcurl marks the control channel as "invalid". As this
test case times out for the data connection it could still use the
control channel.
Skip a floating point addition operation when integral part of time difference
is zero. This avoids potential floating point addition rounding problems while
preserving decimal part value.
By setting PROTOPT_NOURLQUERY in the protocol handler struct, the
protocol will get the "query part" of the URL cut off before the data is
handled by the protocol-specific code. This makes libcurl adhere to
RFC3986 section 2.2.
Test 1220 is added to verify a file:// URL with query-part.
A regression between 7.22.0 and 7.23.0 -- downloading a file with the
flags -O and -J results in the content being written to stdout if and
only if there was no Content-Disposition header in the http response. If
there is a C-D header with a filename attribute, the output is correctly
written.
Reported by: Dave Reisner
Bug: http://curl.haxx.se/mail/archive-2011-11/0030.html
591 -> FTP multi PORT and 425 on upload
592 -> FTP multi PORT and 421 on upload
593 -> FTP multi PORT upload, no data conn and no transient neg. reply
594 -> FTP multi PORT upload, no data conn and no positive prelim. reply
1206 -> FTP PORT and 425 on download
1207 -> FTP PORT and 421 on download
1208 -> FTP PORT download, no data conn and no transient negative reply
1209 -> FTP PORT download, no data conn and no positive preliminary reply
This test is created to verify Rene Bernhardt's patch which makes sure
libcurl properly _not_ deals with Negotiate if not asked to even if the
proxy says it can serve it.
Make NODATACONN425 and NODATACONN421 return a 150 positive preliminary reply
before 425 or 421.
New NODATACONN150 returns 150 without further positive nor negative reply
Now NODATACONN doesn't reply anything at all.
Some torture tests left FTP test server in an unresponsive state, resulting
in torture tests that actually completed following unexpected code paths.
Changes in this commit solely address this issue and some adjustments for
ftpserver.pl logging relative to data channel establishment and tear down.
Pending NODATACONN relative adjustments reserved for a further commit.
Ensure verification takes place with no server commands file.
Ignore verbose setting for running server precheck.
Tweak unresponsive server message, to allow detection by haxx.se scripts.
NODATACONN421: applies only to active FTP mode, instructs server to not
establish data connection back to client and reply with FTP 421.
NODATACONN425: applies only to active FTP mode, instructs server to not
establish data connection back to client and reply with FTP 425.
NODATACONN: applies to both active and passive FTP modes, instructs server
to not establish nor accept a data channel and fool client into believing
that the data channel connection is possible.
Some polishing probably required.
When running torture tests, verify before each test case that required
pingpong servers which are supposed to be alive are actually responsive.
If found not responsive then restart them.
EPRT is now supported by default by the server. To disable it, use the
generic REPLY instruction in the <servercmd> tag. Test 116 now has it
disabled. All other existing active FTP port tests strip out the port
commands from the logs already so the change of the server isn't that
noticable.
As commit 5850cc4808 clarifies, libcurl can deliver header lines that
are longer than CURL_MAX_WRITE_SIZE, only body data is limited to that
size. The curl tool has check (when built debug-enabled) that made the
wrong checks and this new test 1205 verifies that larger headers work.
The fix is pretty much the one Nick Zitzmann provided, just edited to do
the right indent levels and with test case 1204 added to verify the fix.
Bug: http://curl.haxx.se/mail/lib-2011-10/0190.html
Reported by: Nick Zitzmann
When doing a multipart formpost with a read callback, and that callback
returns CURL_READFUNC_ABORT, that return code must be properly
propagated back and handled accordingly. Previously it would be handled
as a zero byte read which would cause a hang!
Added test case 587 to verify. It uses the lib554.c source code with a
small ifdef.
Reported by: Anton Bychkov
Bug: http://curl.haxx.se/mail/lib-2011-10/0097.html
When, for a given test, server is instructed to close connection after
server reply we now wait a very small amount of time (50ms) before doing
so. This is done to allow client to, at least partially, read server
reply before getting an ECONNRESET.
The above is required to make test cases 1070, 1200, 1201 and 1202 pass
with Cygwin 1.5.X on W2K.
GOPHER test server closes connection after _every_ server-reply, as such,
at some point it could require a bigger time or using shutdown() before
a server-side initiated disconnection.
Added missing memoryTracking to test cases 560 and 583. If this triggers
leak detection on these, it only means that previously it was going unnoticed.
Configure script option --enable-wb-ntlm-auth renamed to --enable-ntlm-wb
Configure script option --disable-wb-ntlm-auth renamed to --disable-ntlm-wb
Preprocessor symbol WINBIND_NTLM_AUTH_ENABLED renamed to NTLM_WB_ENABLED
Preprocessor symbol WINBIND_NTLM_AUTH_FILE renamed to NTLM_WB_FILE
Test harness env var CURL_NTLM_AUTH renamed to CURL_NTLM_WB_FILE
Static function wb_ntlm_close renamed to ntlm_wb_cleanup
Static function wb_ntlm_initiate renamed to ntlm_wb_init
Static function wb_ntlm_response renamed to ntlm_wb_response
Feature string literal NTLM_SSO renamed to NTLM_WB.
Preprocessor symbol USE_NTLM_SSO renamed to WINBIND_NTLM_AUTH_ENABLED.
curl's 'long' option 'ntlm-sso' renamed to 'ntlm-wb'.
Fix some comments to make clear that this is actually a NTLM delegation.
Previous interfaces for these libcurl internal functions did not allow to tell
apart a legitimate zero size result from an error condition. These functions
now return a CURLcode indicating function success or otherwise specific error.
Output size is returned using a pointer argument.
All usage of these two functions, and others closely related, has been adapted
to the new interfaces. Relative error and OOM handling adapted or added where
missing. Unit test 1302 also adapted.
Two problems were fixed:
GET_PARAMETER responses that have no body must be 204 response or
properly set length to 0.
One of the <data> sections had the wrong content-length for its
GET_PARAMETER response.
Enabled test 572 again.
There are two keywords in cookie headers that don't follow the regular
name=value style: secure and httponly. Still we must support that they
are written like 'secure=' and then treat them as if they were written
'secure'. Test case 31 was much extended by Rob Ward to test this.
Bug: http://curl.haxx.se/bug/view.cgi?id=3349227
Reported by: "gnombat"
A regression where CURLFORM_BUFFER stopped to properly insert the file
name part in the formpart. Bug introduced in commit f851f76857.
Added CURLFORM_BUFFER use to test 554 to verify this.
Bug: http://curl.haxx.se/mail/lib-2011-07/0176.html
Reported by: Henry Ludemann
Content-disposition headers can provide file names with semicolons which
previously would be cut off at that point.
Added test case 1311 and 1312 to verify -J.
Bug: http://curl.haxx.se/bug/view.cgi?id=3375603
Reported by: Peter Hjalmarsson
Use preprocessor symbols WINBIND_NTLM_AUTH_ENABLED and WINBIND_NTLM_AUTH_FILE
for Samba's winbind daemon ntlm_auth helper code implementation and filename.
Retain preprocessor symbol USE_NTLM_SSO for NTLM single-sign-on feature
availability implementation independent.
For test harness, prefix NTLM_AUTH environment vars with CURL_
Refactor and rename configure option --with-ntlm-auth to --enable-wb-ntlm-auth[=FILE]
When libcurl has said to the server that there's a POST or PUT coming
(with a content-length and all) it has to either deliver that amount of
data or it needs to close the connection before trying a second request.
Adds test case 1129, 1130 and 1131
The bug report is about when used with 100-continue, but the change is
more generic.
Bug: http://curl.haxx.se/mail/lib-2011-06/0191.html
Reported by: Steven Parkes
CURLM_CALL_MULTI_PERFORM stopped being a valid return code from
curl_multi_perform back in 7.20.0. All the libcurl tests are ajusted to
this and no longer check for this return code. Makes them simpler.
Autobuild submitters can use this to add some text to their
setup files to describe issues they've found with the build
or tests. This could include laying blame on test failures on
network issues or dependent libraries, explaining away compiler
warnings or providing any additional information that could be
useful to people reviewing and investigating problems with the
publicly available autobuild logs. Note that persistent test
failures that are not issues with curl itself should normally be
fixed by excluding them from the test run instead.
This is an entirely optional field that is not entered by the
user the first time a new build is created.
adding unit test for Curl_llist_move, documenting unit-tested functions
in llist.c, changing unit-test to unittest, replacing assert calls with
abort_unless calls
The CURLFORM_STREAM is documented to only insert a file name (and thus
look like a file upload) in the part if CURLFORM_FILENAME is set, but in
reality it always inserted a filename="" and if CURLFORM_FILENAME wasn't
set, it would insert insert rubbish (or possibly crash).
This is now fixed to work as documented, and test 554 has been extended
to verify this.
Reported by: Sascha Swiercy
Bug: http://curl.haxx.se/mail/lib-2011-06/0070.html
Properly deal with the fact that the last fread() call most probably is
a short read, and when using callbacks in fact all calls can be short
reads. No longer consider a file read done until it returns a 0 from the
read function.
Reported by: Aaron Orenstein
Bug: http://curl.haxx.se/mail/lib-2011-06/0048.html
When a time condition isn't met, so that no body is delivered to the
application even though a 2xx response is being read from the server, we
must close the connection to avoid a re-use of the connection to be
completely tricked.
Added test 1128 to verify.
Added test 1126 and 1127 to verify curl's behaviour when If-Modified-Since
is used and a 200 is returned.
The list of test cases in Makefile.am is now sorted numerically.
When connecting to a socks or similar proxy we do the proxy handshake at
once when we know the TCP connect is completed and we only consider the
"connection" complete after the proxy handshake. This fixes test 564
which is now no longer considered disabled.
Reported by: Dmitri Shubin
Bug: http://curl.haxx.se/mail/lib-2011-04/0127.html
Added CURLOPT_TRANSFER_ENCODING as the option to set to request Transfer
Encoding in HTTP requests (if built zlib enabled). I also renamed
CURLOPT_ENCODING to CURLOPT_ACCEPT_ENCODING (while keeping the old name
around) to reduce the confusion when we have to encoding options for
HTTP.
--tr-encoding is now the new command line option for curl to request
this, and thus I updated the test cases accordingly.
When TE: is inserted in the request, we must add a "Connection: TE" as
well to be HTTP 1.1 compliant. If a custom Connection: header is passed
in, we must use that and only append TE to it. Test case 1125 verifies
TE: + custom Connection:.
Transfer-Encoding differs from Content-Encoding in a few subtle ways,
but primarily it concerns the transfer only and not the content so when
discovered to be compressed we know we have to uncompress it. There will
only arrive compressed transfers in a response after we have requested
them with the appropriate TE: header.
Test case 1122 and 1123 verify.
curl-config --version didn't output the correct version string (bug
introduced in commit 0355e33b5f), and unfortunately the test
case 1022 that was supposed to check for this was broken.
This change fixes the test to detect this problem and it fixes the
output.
Bug: http://curl.haxx.se/bug/view.cgi?id=3288727
This test case is meant to verify that the logic in commit
60172a0446 actually works. This test failed for me before that
change and it works after it.
All C and H files now (should) feature the proper project curl source
code header, which includes basic info, a copyright statement and some
basic disclaimers.
Add test 582 for uploading a file using sftp and the multi interface.
(Patch and test slightly tweaked by Daniel Stenberg)
Initially marked as disabled until it is fixed in the source.
The stopserver function would append pids to kill and could append them
without separating them with space properly. The result would be a very
large number that by (some implementations of) kill would be interpreted
as a negative number and that process group would be wiped...
Bug: http://curl.haxx.se/bug/view.cgi?id=3188836
Reported by: Greg Pratt
Removed the "netrc_debug" keyword replaced with --netrc-file additions.
Removed the debug code from Curl_parsenetrc as it is superseeded by
--netrc-file.
The HTTP parser allocated memory on each received Location: header
without properly freeing old data. Starting now, the code only considers
the first Location: header and will blissfully ignore subsequent ones.
Bug: http://curl.haxx.se/bug/view.cgi?id=3165129
Reported by: Martin Lemke
This makes it possible to skip the call to unit_stop() in such
cases. Also use Curl_safefree() in unit test 1302 so it will
pass the memory torture test.
