This reduces the HTTP/2 window size to 32 MB since libcurl might have to
buffer up to this amount of data in memory and yet we don't want it set
lower to potentially impact tranfer performance on high speed networks.
Requires nghttp2 commit b3f85e2daa629
(https://github.com/nghttp2/nghttp2/pull/1444) to work properly, to end
up in the next release after 1.40.0.
Fixes#4939Closes#4940
Previously, it was not possible to get a known hosts file entry due to
the lack of an API. ssh_session_get_known_hosts_entry(), introduced in
libssh-0.9.0, allows libcurl to obtain such information and behave the
same as when compiled with libssh2.
This also tries to avoid the usage of deprecated functions when the
replacements are available. The behaviour will not change if versions
older than libssh-0.8.0 are used.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Fixes#4953Closes#4962
When doing a request with a body + Expect: 100-continue and the server
responds with a 417, the same request will be retried immediately
without the Expect: header.
Added test 357 to verify.
Also added a control instruction to tell the sws test server to not read
the request body if Expect: is present, which the new test 357 uses.
Reported-by: bramus on github
Fixes#4949Closes#4964
Note: The RCPT TO command isn't required to advertise to the server that
it contains UTF-8 characters, instead the server is told that a mail may
contain UTF-8 in any envelope command via the MAIL command.
Support the SMTPUTF8 extension when sending mailbox information in the
MAIL command (FROM and AUTH parameters). Non-ASCII domain names will
be ACE encoded, if IDN is supported, whilst non-ASCII characters in
the local address part are passed to the server.
Reported-by: ygthien on github
Fixes#4828
* Don't include 'struct' in the gcrypt MD4_CTX typedef
* The call to gcry_md_read() should use a dereferenced ctx
* The call to gcry_md_close() should use a dereferenced ctx
Additional minor whitespace issue in the USE_WIN32_CRYPTO code.
Closes#4959
To simplify our code and since earlier versions lack important function
calls libcurl needs to function correctly.
nghttp2 1.12.0 was relased on June 26, 2016.
Closes#4961
TLS servers may request a certificate from the client. This request
includes a list of 0 or more acceptable issuer DNs. The client may use
this list to determine which certificate to send. GnuTLS's default
behavior is to not send a client certificate if there is no
match. However, OpenSSL's default behavior is to send the configured
certificate. The `GNUTLS_FORCE_CLIENT_CERT` flag mimics OpenSSL
behavior.
Authored-by: jethrogb on github
Fixes#1411Closes#4958
Whilst lib\md4.c used this pre-processor, lib\md5.c and
src\tool_metalink.c did not and simply relied on the WIN32
pre-processor directive.
Reviewed-by: Marcel Raad
Closes#4955
- Change tool_util.c tvnow() for Windows to match more closely to
timeval.c Curl_now().
- Create a win32 init function for the tool, since some initialization
is required for the tvnow() changes.
Prior to this change the monotonic time function used by curl in Windows
was determined at build-time and not runtime. That was a problem because
when curl was built targeted for compatibility with old versions of
Windows (eg _WIN32_WINNT < 0x0600) it would use GetTickCount which wraps
every 49.7 days that Windows has been running.
This change makes curl behave similar to libcurl's tvnow function, which
determines at runtime whether the OS is Vista+ and if so calls
QueryPerformanceCounter instead. (Note QueryPerformanceCounter is used
because it has higher resolution than the more obvious candidate
GetTickCount64). The changes to tvnow are basically a copy and paste but
the types in some cases are different.
Ref: https://github.com/curl/curl/issues/3309
Closes https://github.com/curl/curl/pull/4847
Saves the file as "[filename].[8 random hex digits].tmp" and renames
away the extension when done.
Co-authored-by: Jay Satiro
Reported-by: Mike Frysinger
Fixes#4914Closes#4926
- Deduplicate GetEnv() code.
- On Windows change ultimate call to use Windows API
GetEnvironmentVariable() instead of C runtime getenv().
Prior to this change both libcurl and the tool had their own GetEnv
which over time diverged. Now the tool's GetEnv is a wrapper around
curl_getenv (libcurl API function which is itself a wrapper around
libcurl's GetEnv).
Furthermore this change fixes a bug in that Windows API
GetEnvironmentVariable() is called instead of C runtime getenv() to get
the environment variable since some changes aren't always visible to the
latter.
Reported-by: Christoph M. Becker
Fixes https://github.com/curl/curl/issues/4774
Closes https://github.com/curl/curl/pull/4863
STRERROR_LEN is the constant used throughout the library to set the size
of the buffer on the stack that the curl strerror functions write to.
Prior to this change some extended length Windows error messages could
be truncated.
Closes https://github.com/curl/curl/pull/4920
- Do not say that conn->data is "cleared" by multi_done().
If the connection is in use then multi_done assigns another easy handle
still using the connection to conn->data, therefore in that case it is
not cleared.
Closes https://github.com/curl/curl/pull/4901
This avoids the duplication of strings when the optional AUTH and SIZE
parameters are required. It also assists with the modifications that
are part of #4892.
Closes#4903
The alt-svc cache survives a call to curl_easy_reset fine, but the file
name to use for saving the cache was cleared. Now the alt-svc cache has
a copy of the file name to survive handle resets.
Added test 1908 to verify.
Reported-by: Craig Andrews
Fixes#4898Closes#4902
RFC 7616 section 3.4 (The Authorization Header Field) states that "For
historical reasons, a sender MUST NOT generate the quoted string syntax
for the following parameters: algorithm, qop, and nc". This removes the
quoting for the algorithm parameter.
Reviewed-by: Steve Holme
Closes#4890
... as this is already done much earlier in the URL parser.
Also add test case 894 that verifies that pop3 with an encodedd CR in
the user name is rejected.
Closes#4887
- Fixed the flag parsing to apply to specific alternative entry only, as
per RFC. The earlier code would also get totally confused by
multiprotocol header, parsing flags from the wrong part of the header.
- Fixed the parser terminating on unknown protocols, instead of skipping
them.
- Fixed a busyloop when protocol-id was present without an equal sign.
Closes#4875
... since the current transfer is being killed. Setting to NULL is
wrong, leaving it pointing to 'data' is wrong since that handle might be
about to get freed.
Fixes#4845Closes#4858
Reported-by: dmitrmax on github
In the "scheme-less" parsing case, we need to strip off credentials
first before we guess scheme based on the host name!
Assisted-by: Jay Satiro
Fixes#4856Closes#4857
Previously it was stored in a global state which contributed to
curl_global_init's thread unsafety. This boolean is now instead figured
out in curl_multi_init() and stored in the multi handle. Less effective,
but thread safe.
Closes#4851
- Removed from global_init since it isn't thread-safe. The symbol will
still remain to not break compiles, it just won't have any effect going
forward.
- make the internals NOT loop on EINTR (the opposite from previously).
It only risks returning from the select/poll/wait functions early, and that
should be risk-free.
Closes#4840
Avoid "reparsing" the content and instead deliver more exactly what is
provided in the certificate and avoid truncating the data after 512
bytes as done previously. This no longer removes embedded newlines.
Fixes#4837
Reported-by: bnfp on github
Closes#4841
As detailed in DEPRECATE.md, the polarssl support is now removed after
having been disabled for 6 months and nobody has missed it.
The threadlock files used by mbedtls are renamed to an 'mbedtls' prefix
instead of the former 'polarssl' and the common functions that
previously were shared between mbedtls and polarssl and contained the
name 'polarssl' have now all been renamed to instead say 'mbedtls'.
Closes#4825
A regression made the code use 'multiplexed' as a boolean instead of the
counter it is intended to be. This made curl try to "over-populate"
connections with new streams.
This regression came with 41fcdf71a1, shipped in curl 7.65.0.
Also, respect the CURLMOPT_MAX_CONCURRENT_STREAMS value in the same
check.
Reported-by: Kunal Ekawde
Fixes#4779Closes#4784
- Allow forcing the host's key type found in the known_hosts file.
Currently, curl (with libssh2) does not take keys from your known_hosts
file into account when talking to a server. With this patch the
known_hosts file will be searched for an entry matching the hostname
and, if found, libssh2 will be told to claim this key type from the
server.
Closes https://github.com/curl/curl/pull/4747
- Support hostname verification via alternative names (SAN) in the
peer certificate when CURLOPT_CAINFO is used in Windows 7 and earlier.
CERT_NAME_SEARCH_ALL_NAMES_FLAG doesn't exist before Windows 8. As a
result CertGetNameString doesn't quite work on those versions of
Windows. This change provides an alternative solution for
CertGetNameString by iterating through CERT_ALT_NAME_INFO for earlier
versions of Windows.
Prior to this change many certificates failed the hostname validation
when CURLOPT_CAINFO was used in Windows 7 and earlier. Most certificates
now represent multiple hostnames and rely on the alternative names field
exclusively to represent their hostnames.
Reported-by: Jeroen Ooms
Fixes https://github.com/curl/curl/issues/3711
Closes https://github.com/curl/curl/pull/4761
- Add new error code CURLE_QUIC_CONNECT_ERROR for QUIC connection
errors.
Prior to this change CURLE_FAILED_INIT was used, but that was not
correct.
Closes https://github.com/curl/curl/pull/4754
- Define USE_WIN32_CRYPTO by default. This enables SMB.
- Show whether SMB is enabled in the "Enabled features" output.
- Fix mingw compiler warning for call to CryptHashData by casting away
const param. mingw CryptHashData prototype is wrong.
Closes https://github.com/curl/curl/pull/4717
