When --with-nghttp2 was used (without a given path), the
PKG_CONFIG_LIBDIR varialbe could get clobbered and ruin a proper
detection of the library.
Reported-by: Dilyan Palauzov
Bug: http://curl.haxx.se/mail/lib-2014-04/0159.html
The issue is with HP-UX that is comes with HP flavor of MIT
Kerberos. This means that there is no krb5-config and the lib is called
libgss.so
Bug: http://curl.haxx.se/bug/view.cgi?id=1321
The ipv6 auto-detect test in configure returns a false negative when
CFLAGS contains -Werror=implicit-function-declaration. (I have been
using this flag to detect code issues that would result in SEGVs on
x86_64-cygwin.)
Patch-by: Yaakov Selkowitz
Bug: http://curl.haxx.se/bug/view.cgi?id=1304
We've announced this pending removal for a long time and we've
repeatedly asked if anyone would care or if anyone objects. Nobody has
objected. It has probably not even been working for a good while since
nobody has tested/used this code recently.
The stuff in krb4.h that was generic enough to be used by other sources
is now present in security.h
For libc variants without a spearate pthread lib (like bionic), try
using pthreads without the pthreads lib first and only if that fails try
the -lpthread linker flag.
Bug: http://curl.haxx.se/bug/view.cgi?id=1216
Reported by: Duncan
1 - We don't use the results from the test and we never did. recvfrom()
is only used by the TFTP code and it has not caused any problems.
2 - the CURL_CHECK_FUNC_RECVFROM function is extremely slow
This function was only used twice, both in places where performance
isn't crucial (socks + if2ip). Removing the use of this function removes
the need to have our private version for systems without it == reduced
amount of code.
Also, in the SOCKS case it is clearly better to fail gracefully rather
than to truncate the results.
This work was triggered by a bug report on the strcal prototype in
strequal.h.
strlcat was added in commit db70cd28 in February 2001!
Bug: http://curl.haxx.se/bug/view.cgi?id=1192
Reported by: Jeremy Huddleston
Some basic checks we make were placed early enough in generated
configure script when using autoconf 2.5X versions. Newer autoconf
versions expand these checks much further into the configure script,
rendering them useless. Using XC_CONFIGURE_PREAMBLE fixes placement
of early intended checks across all our autoconf supported versions.
Tested with:
buildconf: autoconf version 2.69
buildconf: autom4te version 2.69
buildconf: autoheader version 2.69
buildconf: automake version 1.13.1
buildconf: aclocal version 1.13.1
buildconf: libtool version 2.4
buildconf: GNU m4 version 1.4.16
I ran the 2.59 version of autoupdate that updates obsoleted configure.ac
constructs to the 2.59 standard. With a little hands-on fiddling I
prevented it from ruining the quoting in AS_HELP_STRING() uses.
I subsequently also bumped the required autoconf version to 2.59
(released in December 2003) as I don't have an older autoconf version
around to test with and I can't be bothered to install one either...
Inspired by: Björn Stenberg
Related blog post: http://cazfi.livejournal.com/195108.html
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
automake 1.13 errors if AM_CONFIG_HEADER is used in configure script.
automake 1.13 no longer autoupdates AM_CONFIG_HEADER to
AC_CONFIG_HEADERS, thing which automake has been doing since automake
version 1.7
Given that our first automake supported version is automake 1.7,
simply replacing AM_CONFIG_HEADER usage with AC_CONFIG_HEADERS seems
enough to yet support same automake versions.
Dave Reisner reported issue with 1.13 and provided patch.
http://curl.haxx.se/mail/lib-2012-12/0246.html
BLANK_AT_MAKETIME may be used in our Makefile.am files to blank
LIBS variable used in generated makefile at makefile processing
time. Doing this functionally prevents LIBS from being used for
all link targets in given makefile.
AIX sys/poll.h header file defines 'events' and 'revents' as C
preprocessor macros. Usage of these literals in libcurl's external
API was introduced in commit de24d7bd4c causing AIX build failures.
Appropriate inclusion of sys/poll.h by libcurl's external interface
fixes AIX build and usage issues while avoiding a SONAME bump.
Removing this option as it currently only functions to lure people into
wrongly using it and falsely believing that libcurl will work fine
without using nonblocking sockets internally - which leads to hard to
track or understand errors.
This needs another look from the configure experts. I tested that
it works so far with MinGW64 cross-compiler; libcurl builds and
links fine, but curl not yet ...
Allow NTLM authentication when building using SecureTransport (Darwin) for SSL.
This uses CommonCrypto, a cryptography library that ships with all versions of
iOS and Mac OS X. It's like OpenSSL's libcrypto, except that it's missing a few
less-common cyphers and doesn't have a big number data structure.
This option may be used to build curl/libcurl using SSL/TLS support provided
by MS windows system libraries. Option is mutually exclusive with any other
SSL library. Default value is --without-winssl.
--with-winssl option implies --with-sspi option.
Option meaningful only for Windows builds.
Version number is removed in order to make this info consistent with
how we do it with other MS and Linux system libraries for which we don't
provide this info.
Identifier changed from 'WinSSPI' to 'schannel' given that this is the
actual provider of the SSL/TLS support. libcurl can still be built with
SSPI and without SCHANNEL support.
This change adds experimental Metalink support to curl.
To enable Metalink support, run configure with --with-libmetalink.
To feed Metalink file to curl, use --metalink option like this:
$ curl -O --metalink foo.metalink
We use libmetalink to parse Metalink files.
It checks whether versioned symbols should be enabled before checking
whether it is possible (i.e. the linker supports --version-script) or
not. This avoids a useless warning when building cURL on a platform that
does not use GNU ld.
Moreover, it fixes broken indentation of this chunk of code.
NSS_InitContext() was introduced in NSS 3.12.5 and helps to prevent
collisions on NSS initialization/shutdown with other libraries.
Bug: https://bugzilla.redhat.com/738456
configure script now provides conditional definitions for Makefile.am
that result in CURL_HIDDEN_SYMBOLS being defined by resulting makefiles
when appropriate.
Additionally, configure script option for symbol hiding control is now
named --enable-symbol-hiding --disable-symbol-hiding. While still valid,
old option name --enable-hidden-symbols --disable-hidden-symbols will
be deprecated in some future release.
BUILDING_LIBCURL and CURL_STATICLIB are no longer defined in curl_config.h,
configure will generate appropriate conditionals so that mentioned symbols
get defined and used in Makefiles at compilation time
Configuration files such as curl_config.h and all config-*.h no longer exist
nor are generated/copied into 'src' directory, now these only exist in 'lib'
directory from where curl tool sources uses them.
Additionally old src/setup.h has been refactored into src/tool_setup.h which
now pulls lib/setup.h
The possibility of a makefile needing an include path adjustment exists.
This allows building of libcurl on DOS using DJGPP 2.04 and Watt-32
sockets. I know there's already Makefile.djgpp, but I find this more
convenient since I'm used to using the ./configure script from other
platforms
Modify configure.ac to test for new CyaSSL Init function and remove
default install path to system. Change to CyaSSL OpenSSL header and
proper Init in code as well.
Note that this no longer detects or works with CyaSSL before v2
When support for nettle was added in 64f328c787, I overlooked
the fact that AC_CHECK_LIB doesn't add the tested lib to LIBS
if the check succeeded, if a custom success code block was present.
(The previous version of the check had an empty block for
successful checks, adding the lib to LIBS implicitly.)
Therefore, explicitly add either nettle or gcrypt to LIBS, after
deciding which one to use. Even if they can be linked in
transitively, it is safer to actually link explicitly to them.
This fixes building with gnutls with linkers that don't allow
linking transitively, such as for windows.
Allow, at configure time, the production of versioned symbols. The
symbols will look like "CURL_<FLAVOUR>_<VERSION> <SYMBOL>", where
<FLAVOUR> represents the SSL flavour (e.g. OPENSSL, GNUTLS, NSS, ...),
<VERSION> is the major SONAME version and <SYMBOL> is the actual symbol
name. If no SSL library is enabled the symbols will be just
"CURL_<VERSION> <SYMBOL>".
If no SSLv2 was detected in OpenSSL by configure, then we enforce the
OPENSSL_NO_SSL2 define as it seems some people report it not being
defined properly in the OpenSSL headers.
configure.ac:1349: error: possibly undefined macro: PKG_CONFIG_LIBDIR
Obviously this is not a problem with pkg-config 0.26 but older versions
seem to show this.
Fix suggested by: Kamil Dudka
Reported by: Guenter
Bug: http://curl.haxx.se/mail/lib-2011-11/0298.html
Configure script option --enable-wb-ntlm-auth renamed to --enable-ntlm-wb
Configure script option --disable-wb-ntlm-auth renamed to --disable-ntlm-wb
Preprocessor symbol WINBIND_NTLM_AUTH_ENABLED renamed to NTLM_WB_ENABLED
Preprocessor symbol WINBIND_NTLM_AUTH_FILE renamed to NTLM_WB_FILE
Test harness env var CURL_NTLM_AUTH renamed to CURL_NTLM_WB_FILE
Static function wb_ntlm_close renamed to ntlm_wb_cleanup
Static function wb_ntlm_initiate renamed to ntlm_wb_init
Static function wb_ntlm_response renamed to ntlm_wb_response
Feature string literal NTLM_SSO renamed to NTLM_WB.
Preprocessor symbol USE_NTLM_SSO renamed to WINBIND_NTLM_AUTH_ENABLED.
curl's 'long' option 'ntlm-sso' renamed to 'ntlm-wb'.
Fix some comments to make clear that this is actually a NTLM delegation.
IRIX 6.5.24 gcc 3.3 autobuilds fail unittests library compilation due to a
problem related with OpenSSL headers and library versions not matching.
All AIX autobuilds fails unit tests linking against unittests library due to
unittests library being built with no symbols or members. Libtool ?
Use preprocessor symbols WINBIND_NTLM_AUTH_ENABLED and WINBIND_NTLM_AUTH_FILE
for Samba's winbind daemon ntlm_auth helper code implementation and filename.
Retain preprocessor symbol USE_NTLM_SSO for NTLM single-sign-on feature
availability implementation independent.
For test harness, prefix NTLM_AUTH environment vars with CURL_
Refactor and rename configure option --with-ntlm-auth to --enable-wb-ntlm-auth[=FILE]
"test -e" is POSIX but clearly was not supported by the SunOS sh
version, -f is supported and should be a decent equivalent
Bug: http://curl.haxx.se/bug/view.cgi?id=3371574
cross-compilation of unit tests static library/programs fails when
libcurl shared library is also built. This might be due to a libtool or
automake issue. In this case we disable unit tests.
Now use gai_strerror() to get proper error messages when getaddrinfo()
has failed. Detect the function in configure.
Code based on work and suggestions by Jeff Pohlmeyer and Guenter Knauf
The script didn't properly add the -lssh2 link option when it enabled
libssh2 linking where pkg-config isn't found.
Reported by: Saqib Ali
Bug: http://curl.haxx.se/mail/lib-2011-04/0054.html
configure.ac: Test harness libhostname library will not be built for Windows.
runtests.pl: LD_PRELOAD mechanism will not be used to load libhostname
library on operating systems which lack LD_PRELOAD support.
Added axTLS to autotool files and glue code to misc other files.
axtls.h maps SSL API functions, but may change.
axtls.c is just a stub file and will definitely change.
If --librtmp was specified but pkg-config could not find the librtmp
file, we would have undefined symbols when linking curl.
We prevent this error by disabling this case as suggested on the mailing
list.
Instead of reopening the downloaded file, fsetxattr uses the (already
open) file descriptor to attach extended attributes. This makes the
procedure more robust against errors caused by moved or deleted files.
setxattr is a glibc call to set extended attributes, so configure now
checks for it and the code is adapted to only build when the
functionality is present.
In libssh2 1.2.8, libssh2_session_handshake() replaces
libssh2_session_startup() to fix the previous portability problem with
the socket type that was too small for win64 and thus easily could cause
crashes and more.
... for example when LDAP is not compiled.
Fixed the logic to match the rest of the options' message that is we
update the default message only if the option is not disabled after the
different checks.
Reported by: Guenter Knauf
librtmp is often statically linked and using sub dependencies like
OpenSSL, so we need to make sure we can actually link with it properly
before enabling it. Otherwise we easily end up trying to link with a
RTMP lib that fails.
1 - libcurl assumes that there are gcrypt functions available when
GnuTLS is.
2 - GnuTLS can be built to use libnettle instead as crypto library,
which breaks assumption (1)
This change makes configure make sure that if GnuTLS is requested and
detected, it also makes sure that gcrypt is present or it errors
out. This is mostly a way to make the user more aware of this flaw, the
correct fix would be to detect which crypto layer that is in use and
adapt our code to use that instead of blindly assuming gcrypt.
Reported by: Michal Gorny
Bug: http://curl.haxx.se/bug/view.cgi?id=3071038
libssh2 1.2.6 and later handle >32bit file sizes properly even on 32bit
architectures and we make sure to use that ability.
Reported by: Mikael Johansson
Bug: http://curl.haxx.se/mail/lib-2010-08/0052.html
The curl-config now features a --built-shared command line option that
will output 'yes' or 'no' depending if the build process was asked to
build shared library/libraries or not.
It is primarily made to offer more details to the test suite to know
what kind of stunts it can expect to work.
This passes -Werror to gcc when building curl and libcurl,
allowing easy dection of compile warnings.
Signed-off-by: Ben Greear <greearb@candelatech.com>
configure checks for grep, egrep, sed and ar and set the variables GREP,
EGREP, SED and AR accordingly. We now let already set variables override
the internal choices to let users make decisions when they know the
right choice already. This is a regression as our configure script used
to allow this back before commit 0b57c475 (up to 7.18.2).
Reported by: "kdekker"
Bug: http://curl.haxx.se/bug/view.cgi?id=3028318
When configured with '--without-ssl --with-nss', NTLM authentication
now uses NSS crypto library for MD5 and DES. For MD4 we have a local
implementation in that case. More details are available at
https://bugzilla.redhat.com/603783
In order to get it working, curl_global_init() must be called with
CURL_GLOBAL_SSL or CURL_GLOBAL_ALL. That's necessary because NSS needs
to be initialized globally and we do so only when the NSS library is
actually required by protocol. The mentioned call of curl_global_init()
is responsible for creating of the initialization mutex.
There was also slightly changed the NSS initialization scenario, in
particular, loading of the NSS PEM module. It used to be loaded always
right after the NSS library was initialized. Now the library is
initialized as soon as any SSL or NTLM is required, while the PEM module
is prevented from being loaded until the SSL is actually required.
Enable OpenLDAP support for cygwin builds. This support was disabled back
in 2008 due to incompatibilities between OpenSSL and OpenLDAP headers.
cygwin's OpenSSL 0.9.8l and OpenLDAP 2.3.43 versions on cygwin 1.5.25
allow building an OpenLDAP enabled libcurl supporting back to Windows 95.
Remove non-functional CURL_LDAP_HYBRID code and references.
