Gisle Vanem
5f085789b9
init_resolve_thread() needs 'hints' on the native form.
2008-11-01 15:16:47 +00:00
Yang Tse
0ce97f77e0
Use our Curl_addrinfo definition even when an addrinfo struct is available.
...
Use a wrapper function to call system's getaddrinfo().
2008-10-30 13:45:25 +00:00
Dan Fandrich
8f467b4288
Removed unneeded includes of signal.h and setjmp.h
2008-09-29 21:44:50 +00:00
Gisle Vanem
138c57c76a
Removed TRACE() code.
2008-08-06 08:05:09 +00:00
Dan Fandrich
248c2b9bf5
Eliminate a unnecessary socket creation in Curl_getaddrinfo for an IPv4
...
address in an IPv6 capable libcurl.
2008-07-29 18:26:35 +00:00
Yang Tse
736af32b49
Bug report #1888932 ( http://curl.haxx.se/bug/view.cgi?id=1888932 ) points
...
out and provides test program that demonstrates that libcurl might not set
error description message for error CURLE_COULDNT_RESOLVE_HOST for Windows
threaded name resolver builds. Fixed now.
2008-02-10 04:20:09 +00:00
Daniel Stenberg
ad6e28073c
removed space after if and while before the parenthesis for better source code
...
consistency
2007-11-05 09:45:09 +00:00
Gisle Vanem
1dcb99f0f7
constify 'hostname' in init_thread_sync_data(). Simply clear
...
the whole 'tsd' structure on exit in destroy_thread_sync_data().
2007-06-11 04:33:21 +00:00
Daniel Stenberg
d7616d8a0a
WaitForSingleObject() uses a millisecond timeout and CURL_TIMEOUT_RESOLVE is
...
counted in seconds...
2007-05-20 22:11:47 +00:00
Gisle Vanem
c514a2a89a
Removed inclusion of <sys/types.h> and <sys/stat.h> in .c-files
...
since they're already included through "setup.h".
2007-02-26 04:24:26 +00:00
Yang Tse
3a634a273a
curlassert macro replaced with DEBUGASSERT macro defined in setup_once.h
2007-02-21 19:03:20 +00:00
Yang Tse
a1d5983991
use macros ERRNO, SET_ERRNO(), SOCKERRNO and SET_SOCKERRNO() for errno handling
2007-02-16 18:19:35 +00:00
Daniel Stenberg
91386937ff
- Michael Wallner provided a patch that adds support for CURLOPT_TIMEOUT_MS
...
and CURLOPT_CONNECTTIMEOUT_MS that, as their names should hint, do the
timeouts with millisecond resolution instead. The only restriction to that
is the alarm() (sometimes) used to abort name resolves as that uses full
seconds. I fixed the FTP response timeout part of the patch.
Internally we now count and keep the timeouts in milliseconds but it also
means we multiply set timeouts with 1000. The effect of this is that no
timeout can be set to more than 2^31 milliseconds (on 32 bit systems), which
equals 24.86 days. We probably couldn't before either since the code did
*1000 on the timeout values on several places already.
2007-02-05 22:51:32 +00:00
Daniel Stenberg
930f9bd534
clear the struct size not the pointer size, pointed out in bug report
...
#1579171
2006-10-17 20:34:11 +00:00
Yang Tse
13616f8f96
Simplify check for NEED_MALLOC_H, and make more explicit that NEED_MALLOC_H shall be defined if <malloc.h> header file must be included even when including <stdlib.h>.
2006-07-25 13:49:49 +00:00
Gisle Vanem
a55c70d4ae
Constify 'hostname' and 'service' to various resolver functions.
2006-07-21 05:51:12 +00:00
Yang Tse
fe22872d14
include <malloc.h> only if HAVE_MALLOC_H and NEED_MALLOC_H are both defined.
2006-07-11 21:34:23 +00:00
Gisle Vanem
725f734bae
Correct the trace for WinCE.
2006-07-07 07:49:16 +00:00
Gisle Vanem
0f32460656
WinCE uses CreateThread(). Hence error is not in 'errno'.
2006-07-07 07:46:40 +00:00
Gisle Vanem
25180cc850
Removed copying 'stderr' since it doesn't have the desired
...
effect.
2006-07-07 07:41:47 +00:00
Gisle Vanem
3cbb1b2b64
Use the HAVE_MALLOC_H and HAVE_PROCESS_H defines
...
(more logical).
2006-04-26 17:23:28 +00:00
Gisle Vanem
08f0e55b4f
Add "multiif.h" for GETSOCK_WRITESOCK() macro.
2006-04-12 13:54:07 +00:00
Daniel Stenberg
0542002d7a
adjusted to the new internal *_getsock() concept for providing info internally
...
about what sockets to wait for what action on
2006-04-11 07:23:30 +00:00
Daniel Stenberg
afc2aa2b3f
Yang Tse: use static on file-private functions
2005-11-24 20:39:00 +00:00
Daniel Stenberg
cab59b4c32
Removed the use of AI_CANONNAME in the IPv6-enabled resolver functions since
...
we really have no use for reverse lookups of the address.
I truly hope these are the last reverse lookups we had lingering in the
code!
2005-11-08 14:45:58 +00:00
Daniel Stenberg
bfa9c42c25
Bradford Bruce made the windows resolver code properly return
...
CURLE_COULDNT_RESOLVE_PROXY and CURLE_COULDNT_RESOLVE_HOST on resolving
errors (as documented).
2005-10-21 19:21:19 +00:00
Gisle Vanem
e8c3bb45ba
Fix for building with MS Visual-C and single-threaded
...
runtime libs.
2005-10-02 16:52:07 +00:00
Daniel Stenberg
e7093b3ca8
keep 'socktype' in the connectdata struct and make sure we use that for all
...
protocol sockets even if the resolved address may say otherwise
2005-09-16 21:30:08 +00:00
Gisle Vanem
9889a811db
Fix warning about missing initializers.
2005-09-06 15:58:09 +00:00
Daniel Stenberg
64298e528d
Use SOCK_DGRAM for TFTP. Consider setting this up at one central place, we
...
have this check done on far too many places by now...
2005-09-06 10:37:57 +00:00
Daniel Stenberg
2fe3c22108
use it as 'struct addrinfo' so perhaps it builds on mingw again
2005-08-31 06:04:48 +00:00
Daniel Stenberg
87bbd13899
Igor Polyakov fixed a rather nasty problem with the threaded name resolver
...
for Windows, that could lead to an Access Violation when the multi interface
was used due to an issue with how the resolver thread was and was not
terminated.
2005-08-29 14:23:53 +00:00
Gisle Vanem
bb0aba34fa
Ensure thread handle is closed too.
2005-06-14 14:47:21 +00:00
Daniel Stenberg
6b1220b61d
Cory Nelson's work on nuking compiler warnings when building on x64 with
...
VS2005.
2005-04-26 13:08:49 +00:00
Daniel Stenberg
5f0366c2cb
only define _REENTRANT if not already defined, and only in setup.h
2005-04-19 23:19:23 +00:00
Gisle Vanem
0b45431139
hostthre.c: destroy_thread_data() made public. Called
...
from url.c: Curl_disconnect().
2005-04-04 12:30:03 +00:00
Daniel Stenberg
c85a77e0b1
removed a (fairly useless) debug output just to compile without warning
2005-03-20 12:46:11 +00:00
Daniel Stenberg
6a2e21ec8c
FTP code turned into state machine. Not completely yet, but a good start.
...
The tag 'before_ftp_statemachine' was set just before this commit in case
of future need.
2005-02-09 13:06:40 +00:00
Gisle Vanem
d118312922
Curl_addrinfo?_callback() and addrinfo_callback() now returns
...
CURLE_OK or CURLE_OUT_OF_MEMORY.
Add typecast in hostares.c.
2005-02-08 12:36:13 +00:00
Gisle Vanem
06ad5be3af
Don't copy 'stderr' for Win-CE in IPv6 code. Don't call
...
GetCurrentProcess() twice; use a local variable.
2005-01-19 10:20:55 +00:00
Daniel Stenberg
5d94ff5974
made the code fit within 80 cols
2004-11-25 16:49:14 +00:00
Daniel Stenberg
24d47a6e07
Paul Nolan fix to make libcurl build nicely on Windows CE
2004-11-02 10:12:22 +00:00
Gisle Vanem
e356420123
Added Traian Nicolescu's patches for threaded resolver on
...
Windows. Plugged some potential handle and memory leaks.
Refs.
http://curl.haxx.se/mail/lib-2004-10/0134.html
http://curl.haxx.se/mail/lib-2004-10/0157.html
2004-10-16 12:59:05 +00:00
Daniel Stenberg
39af394a1c
removed tabs and trailing whitespace from source
2004-10-06 07:50:18 +00:00
Daniel Stenberg
785bad388b
Gisle cleaned up remaining host resolve re-org issues
2004-06-24 14:39:52 +00:00
Daniel Stenberg
5e34f3dc01
made the Curl_he2ai() take the port number as an int intead, to avoid lots
...
of typecasts all over
2004-06-24 10:43:50 +00:00
Daniel Stenberg
cdb419d65e
typecast to prevent warning
2004-06-24 08:31:17 +00:00
Daniel Stenberg
1daa258b8a
fixed problems I missed to fix from my cleanup
2004-06-24 08:09:54 +00:00
Daniel Stenberg
c39858aac0
Source cleanups. The major one being that we now _always_ use a Curl_addrinfo
...
linked list for name resolved data, even on hosts/systems with only IPv4
stacks as this simplifies a lot of code.
2004-06-24 07:43:48 +00:00
Daniel Stenberg
9f341f9ce5
Gisle Vanem's improved verbose output and timeout handling when connecting to
...
a host name that resolves to multiple IP addresses.
2004-06-10 11:06:21 +00:00