Chen pointed out how curl couldn't upload with resume when reading from a
pipe.
This ended up with the introduction of a new return code for the
CURLOPT_SEEKFUNCTION callback that basically says that the seek failed but
that libcurl may try to resolve the situation anyway. In our case this means
libcurl will attempt to instead read that much data from the stream instead
of seeking and that way curl can now upload with resume when data is read
from a stream!
how it occurs (http://curl.haxx.se/mail/lib-2009-04/0289.html). The
conclusion was that if an error is detected and Curl_done() is called for
the connection, ftp_done() could at times return another error code that
then would take precedence and that new code confused existing logic that
works for the first error code (CURLE_SEND_ERROR) only.
proxy. libcurl would then wrongly close the connection after each
request. In his case it had the weird side-effect that it killed NTLM auth
for the proxy causing an inifinite loop!
I added test case 1098 to verify this fix. The test case does however not
properly verify that the transfers are done persistently - as I couldn't
think of a clever way to achieve it right now - but you need to read the
stderr output after a test run to see that it truly did the right thing.
FTP with the multi interface: when a transfer fails, like when aborted by a
write callback, the control connection was wrongly closed and thus not
re-used properly.
This change is also an attempt to cleanup the code somewhat in this area, as
now the FTP code attempts to keep (better) track on pending responses
necessary to get read in ftp_done().
plain FTP connections, and it will then allow MKD to fail once and retry the
CWD afterwards. This is especially useful if you're doing many simultanoes
connections against the same server and they all have this option enabled,
as then CWD may first fail but then another connection does MKD before this
connection and thus MKD fails but trying CWD works! The numbers can
(should?) now be set with the convenience enums now called
CURLFTP_CREATE_DIR and CURLFTP_CREATE_DIR_RETRY.
Tests has proven that if you're making an application that uploads a set of
files to an ftp server, you will get a noticable gain in speed if you're
using multiple connections and this option will be then be very useful.
the condition in the previous request was unmet. This is typically a time
condition set with CURLOPT_TIMECONDITION and was previously not possible to
reliably figure out. From bug report #2565128
(http://curl.haxx.se/bug/view.cgi?id=2565128)
version 1.1 instead of 1.0 like before. This change also introduces the new
proxy type for libcurl called 'CURLPROXY_HTTP_1_0' that then allows apps to
switch (back) to CONNECT 1.0 requests. The curl tool also got a --proxy1.0
option that works exactly like --proxy but sets CURLPROXY_HTTP_1_0.
I updated all test cases cases that use CONNECT and I tried to do some using
--proxy1.0 and some updated to do CONNECT 1.1 to get both versions run.
clarity. This does fix one problem that causes ;type=i FTP URLs
to fail in the Turkish locale when CURLOPT_PROXY_TRANSFER_MODE is
used (test case 561)
Added tests 561 and 1092 through 1094 to test various combinations
of ;type= and ;mode= URLs that could potentially fail in the Turkish
locale.
now has an improved ability to do right when the multi interface (both
"regular" and multi_socket) is used for SCP and SFTP transfers. This should
result in (much) less busy-loop situations and thus less CPU usage with no
speed loss.
particular state for the control connection like it did before for implicit
FTPS (libcurl assumed such control connections to be encrypted while some
FTPS servers such as FileZilla assumes such connections to be clear
mode). Use the CURLOPT_USE_SSL option to set your desired level.
researching it, it turned out he got a 550 response back from a SIZE command
and then I fell over the text in RFC3659 that says:
The presence of the 550 error response to a SIZE command MUST NOT be taken
by the client as an indication that the file cannot be transferred in the
current MODE and TYPE.
In other words: the change I did on September 30th 2008 and that has been
included in the last two releases were a regression and a bad idea. We MUST
NOT take a 550 response from SIZE as a hint that the file doesn't exist.
Changed checkprefix() to use it and those instances of strnequal() that
compare host names or other protocol strings that are defined to be
independent of case in the C locale. This should fix a few more
Turkish locale problems.
systems supporting getifaddrs(). Also fixed a problem where an IPv6
address could be chosen instead of an IPv4 one for --interface when it
involved a name lookup.
gets a 550 response back for the cases where a download (or NOBODY) is
wanted. It still allows a 550 as response if the SIZE is used as part of an
upload process (like if resuming an upload is requested and the file isn't
there before the upload). I also modified the FTP test server and a few test
cases accordingly to match this modified behavior.
remain in use as internal curl_off_t print formatting strings for the internal
*printf functions which still cannot handle print formatting string directives
such as "I64d", "I64u", and others available on MSVC, MinGW, Intel's ICC, and
other DOS/Windows compilers.
This reverts previous commit part which did:
FORMAT_OFF_T -> CURL_FORMAT_CURL_OFF_T
FORMAT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
the names of the curl_off_t formatting string directives now become
CURL_FORMAT_CURL_OFF_T and CURL_FORMAT_CURL_OFF_TU.
CURL_FMT_OFF_T -> CURL_FORMAT_CURL_OFF_T
CURL_FMT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
Remove the use of an internal name for the curl_off_t formatting string directives
and use the common one available from the inside and outside of the library.
FORMAT_OFF_T -> CURL_FORMAT_CURL_OFF_T
FORMAT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
line of a multiline FTP response whose last byte landed exactly at the end
of the BUFSIZE-length buffer would be treated as the terminal response
line. The following response code read in would then actually be the
end of the previous response line, and all responses from then on would
correspond to the wrong command. Test case 1062 verifies this.
Stop closing a never-opened ftp socket.
fix for it. It occured when you did a FTP transfer using
CURLFTPMETHOD_SINGLECWD and then did another one on the same easy handle but
switched to CURLFTPMETHOD_NOCWD. Due to the "dir depth" variable not being
cleared properly. Scott's test case is now known as test 539 and it
verifies the fix.
message when libcurl doesn't get a 220 back immediately on connect, I now
changed it to be more specific on what the problem is. Also worth noticing:
while the bug report contains an example where the response is:
421 There are too many connected users, please try again later
we cannot assume that the error message will always be this readable nor
that it fits within a particular boundary etc.
the SingleRequest one to make pipelining better. It is a bit tricky to keep
them in the right place, to keep things related to the actual request or to
the actual connection in the right place.
libcurl to seek in a given input stream. This is particularly important when
doing upload resumes when there's already a huge part of the file present
remotely. Before, and still if this callback isn't used, libcurl will read
and through away the entire file up to the point to where the resuming
begins (which of course can be a slow opereration depending on file size,
I/O bandwidth and more). This new function will also be preferred to get
used instead of the CURLOPT_IOCTLFUNCTION for seeking back in a stream when
doing multi-stage HTTP auth with POST/PUT.
is an inofficial PROXY4 variant that sends the hostname to the proxy instead
of the resolved address (which is already supported by SOCKS5). --socks4a is
the curl command line option for it and CURLOPT_PROXYTYPE can now be set to
CURLPROXY_SOCKS4A as well.
is inited at the start of the DO action. I removed the Curl_transfer_keeper
struct completely, and I had to move out a few struct members (that had to
be set before DO or used after DONE) to the UrlState struct. The SingleRequest
struct is accessed with SessionHandle->req.
One of the biggest reasons for doing this was the bunch of duplicate struct
members in HandleData and Curl_transfer_keeper since it was really messy to
keep track of two variables with the same name and basically the same purpose!
was even mentioned to be bad in a comment! Should make test 2000 and 2001 work
fine.
Also, freedirs() now take a ftp_conn struct pointer which saves some extra
unnecessary variable assignments.
https://bugzilla.novell.com/show_bug.cgi?id=332917 about a HTTP redirect to
FTP that caused memory havoc. His work together with my efforts created two
fixes:
#1 - FTP::file was moved to struct ftp_conn, because is has to be dealt with
at connection cleanup, at which time the struct HandleData could be
used by another connection.
Also, the unused char *urlpath member is removed from struct FTP.
#2 - provide a Curl_reset_reqproto() function that frees
data->reqdata.proto.* on connection setup if needed (that is if the
SessionHandle was used by a different connection).
CURLOPT_NOBODY enabled but not CURLOPT_HEADER, libcurl wouldn't do TYPE
before it does SIZE which makes it less useful. I walked over the code and
made it do this properly, and added test case 542 to verify it.
second transfer as it didn't store and remember the "" path from the
previous transfer so it would instead CWD to the entry path as stored. This
worked, but did a superfluous command. Thus, test case 541 now also verifies
this fix.
and allow reuse by multiple protocols. Several unused error codes were
removed. In all cases, macros were added to preserve source (and binary)
compatibility with the old names. These macros are subject to removal at
a future date, but probably not before 2009. An application can be
tested to see if it is using any obsolete code by compiling it with the
CURL_NO_OLDIES macro defined.
Documented some newer error codes in libcurl-error(3)
out that libcurl didn't deal with large responses from server commands, when
the single response was consisting of multiple lines but of a total size of
16KB or more. Dan Fandrich improved the ftp test script and provided test
case 1006 to repeat the problem, and I fixed the code to make sure this new
test case runs fine.
out that libcurl didn't deal with very long (>16K) FTP server response lines
properly. Starting now, libcurl will chop them off (thus the client app will
not get the full line) but survive and deal with them fine otherwise. Test
case 1003 was added to verify this.
(http://curl.haxx.se/bug/view.cgi?id=1776232) about libcurl calling
Curl_client_write(), passing on a const string that the caller may not
modify and yet it does (on some platforms).
(http://curl.haxx.se/bug/view.cgi?id=1776235) about ftp requests with NOBODY
on a directory would do a "SIZE (null)" request. This is now fixed and test
case 1000 was added to verify.
passed to it with curl_easy_setopt()! Previously it has always just refered
to the data, forcing the user to keep the data around until libcurl is done
with it. That is now history and libcurl will instead clone the given
strings and keep private copies.
(http://curl.haxx.se/bug/view.cgi?id=1757328) and submitted a patch. It turns
out we broke login to FTP servers that don't require (nor understand) PASS
after the USER command
http://curl.haxx.se/mail/lib-2007-06/0238.html, libcurl didn't properly do
no-body requests on FTP files on re-used connections properly, or at least
it didn't provide the info back in the header callback properly in the
subsequent requests.
returning an error code, to allow connections to be torn down
cleanly since this function can be called AFTER an OOM situation
has already been reached.
and CURLOPT_CONNECTTIMEOUT_MS that, as their names should hint, do the
timeouts with millisecond resolution instead. The only restriction to that
is the alarm() (sometimes) used to abort name resolves as that uses full
seconds. I fixed the FTP response timeout part of the patch.
Internally we now count and keep the timeouts in milliseconds but it also
means we multiply set timeouts with 1000. The effect of this is that no
timeout can be set to more than 2^31 milliseconds (on 32 bit systems), which
equals 24.86 days. We probably couldn't before either since the code did
*1000 on the timeout values on several places already.
doing an FTP transfer is removed from a multi handle before completion. The
fix also fixed the "alive counter" to be correct on "premature removal" for
all protocols.
curl that uses the new CURLOPT_FTP_SSL_CCC option in libcurl. If enabled, it
will make libcurl shutdown SSL/TLS after the authentication is done on a
FTP-SSL operation.
get confused and not acknowledge the 'no_proxy' variable properly once it
had used the proxy and you re-used the same easy handle. I made sure the
proxy name is properly stored in the connect struct rather than the
sessionhandle/easy struct.
(http://curl.haxx.se/bug/view.cgi?id=1618359) and subsequently provided a
patch for it: when downloading 2 zero byte files in a row, curl 7.16.0
enters an infinite loop, while curl 7.16.1-20061218 does one additional
unnecessary request.
Fix: During the "Major overhaul introducing http pipelining support and
shared connection cache within the multi handle." change, headerbytecount
was moved to live in the Curl_transfer_keeper structure. But that structure
is reset in the Transfer method, losing the information that we had about
the header size. This patch moves it back to the connectdata struct.
something went wrong like it got a bad response code back from the server,
libcurl would leak memory. Added test case 538 to verify the fix.
I also noted that the connection would get cached in that case, which
doesn't make sense since it cannot be re-use when the authentication has
failed. I fixed that issue too at the same time, and also that the path
would be "remembered" in vain for cases where the connection was about to
get closed.
(http://curl.haxx.se/bug/view.cgi?id=1600447) in which he noted that active
FTP connections don't work with the multi interface. The problem is here that
the multi interface state machine has a state during which it can wait for the
data connection to connect, but the active connection is not done in the same
step in the sequence as the passive one is so it doesn't quite work for
active. The active FTP code still use a blocking function to allow the remote
server to connect.
The fix (work-around is a better word) for this problem is to set the
boolean prematurely that the data connection is completed, so that the "wait
for connect" phase ends at once.
could very well cause a negate number get passed in and thus cause reading
outside of the array usually used for this purpose.
We avoid this by using the uppercase macro versions introduced just now that
does some extra crazy typecasts to avoid byte codes > 127 to cause negative
int values.
is still trying to resolve the host name, it seems that the ftp struct is not
yet initialized, but the removal action calls Curl_done() which calls
Curl_ftp_done. So we simply return success from there if no ftp pointer is
set.
CURLOPT_NOBODY is set true. PREQUOTE is then run roughly at the same place
in the command sequence as it would have run if there would've been a
transfer.
(http://curl.haxx.se/bug/view.cgi?id=1481217), with follow-ups by Michele Bini
and David Byron. libcurl previously wrongly used GetLastError() on windows to
get error details after socket-related function calls, when it really should
use WSAGetLastError() instead.
When changing to this, the former function Curl_ourerrno() is now instead
called Curl_sockerrno() as it is necessary to only use it to get errno from
socket-related functions as otherwise it won't work as intended on Windows.
an app can use to let libcurl only connect to a remote host and then extract
the socket from libcurl. libcurl will then not attempt to do any transfer at
all after the connect is done.
even after EPSV returned a positive response code, if libcurl failed to
connect to the port number the EPSV response said. Obviously some people are
going through protocol-sensitive firewalls (or similar) that don't understand
EPSV and then they don't allow the second connection unless PASV was
used. This also called for a minor fix of test case 238.
(CURLOPT_FTPPORT) didn't work for ipv6-enabed curls if the IP wasn't a
"native" IP while it works fine for ipv6-disabled builds!
In the process of fixing this, I removed the support for LPRT since I can't
think of many reasons to keep doing it and asking on the mailing list didn't
reveal anyone else that could either. The code that sends EPRT and PORT is
now also a lot simpler than before (IMHO).
given subdirs, libcurl would still "remember" the full path as if it is the
current directory libcurl is in so that the next curl_easy_perform() would
get really confused if it tried the same path again - as it would not issue
any CWD commands at all, assuming it is already in the "proper" dir.
Starting now, a failed CWD command sets a flag that prevents the path to be
"remembered" after returning.
that made curl run fine in his end. The key was to make sure we do the
SSL/TLS negotiation immediately after the TCP connect is done and not after
a few other commands have been sent like we did previously. I don't consider
this change necessary to obey the standards, I think this server is pickier
than what the specs allow it to be, but I can't see how this modified
libcurl code can add any problems to those who are interpreting the
standards more liberally.
fix the CONNECT authentication code with multi-pass auth methods (such as
NTLM) as it didn't previously properly ignore response-bodies - in fact it
stopped reading after all response headers had been received. This could
lead to libcurl sending the next request and reading the body from the first
request as response to the second request. (I also renamed the function,
which wasn't strictly necessary but...)
The best fix would to once and for all make the CONNECT code use the
ordinary request sending/receiving code, treating it as any ordinary request
instead of the special-purpose function we have now. It should make it
better for multi-interface too. And possibly lead to less code...
Added test case 265 for this. It doesn't work as a _really_ good test case
since the test proxy is too stupid, but the test case helps when running the
debugger to verify.
internally, with code provided by sslgen.c. All SSL-layer-specific code is
then written in ssluse.c (for OpenSSL) and gtls.c (for GnuTLS).
As far as possible, internals should not need to know what SSL layer that is
in use. Building with GnuTLS currently makes two test cases fail.
TODO.gnutls contains a few known outstanding issues for the GnuTLS support.
GnuTLS support is enabled with configure --with-gnutls
file got a Last-Modified: header written to the data stream, corrupting the
actual data. This was because some conditions from the previous FTP code was
not properly brought into the new FTP code. I fixed and I added test case 520
to verify. (This bug was introduced in 7.13.1)
on the remote side. This then converts the operation to an ordinary STOR
upload. This was requested/pointed out by Ignacio Vazquez-Abrams.
It also proved (and I fixed) a bug in the newly rewritten ftp code (and
present in the 7.13.1 release) when trying to resume an upload and the servers
returns an error to the SIZE command. libcurl then loops and sends SIZE
commands infinitely.
present in RFC959... so now (lib)curl supports it as well. --ftp-account and
CURLOPT_FTP_ACCOUNT set the account string. (The server may ask for an account
string after PASS have been sent away. The client responds with "ACCT [account
string]".) Added test case 228 and 229 to verify the functionality. Updated
the test FTP server to support ACCT somewhat.
contains %0a or %0d in the user, password or CWD parts. (A future fix would
include doing it for %00 as well - see KNOWN_BUGS for details.) Test case 225
and 226 were added to verify this
response. Previously, libcurl would re-resolve the host name with the new
port number and attempt to connect to that, while it should use the IP from
the control channel. This bug made it hard to EPSV from an FTP server with
multiple IP addresses!
(http://qa.mandrakesoft.com/show_bug.cgi?id=12285), when connecting to an
IPv6 host with FTP, --disable-epsv (or --disable-eprt) effectively disables
the ability to transfer a file. Now, when connected to an FTP server with
IPv6, these FTP commands can't be disabled even if asked to with the
available libcurl options.
If EPSV, EPRT or LPRT is tried and doesn't work, it will not be retried on
the same server again even if a following request is made using a persistent
connection.
If a second request is made to a server, requesting a file from the same
directory as the previous request operated on, libcurl will no longer make
that long series of CWD commands just to end up on the same spot. Note that
this is only for *exactly* the same dir. There is still room for improvements
to optimize the CWD-sending when the dirs are only slightly different.
Added test 210, 211 and 212 to verify these changes. Had to improve the
test script too and added a new primitive to the test file format.
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=134133) and not to anyone
involved in the curl project! This happens when you try to curl a file from a
proftpd site using SSL. It seems proftpd sends a somewhat unorthodox PASS
response code (232 instead of 230). I relaxed the response code check to deal
with this and similar cases.
all things up to work with encoded host names internally, as well as keeping
'display names' to show in debug messages. IDN resolves work for me now using
ipv6, ipv4 and ares resolving. Even cookies on IDN sites seem to do right.
we won't try to QUIT the control connection and risk "hanging" waiting for
a response. Test case 161 verifies this. The quit-sending function was
also made static.
PORT
Provide better error messages to allow debugging if one if the ipv6-related
name functions fail in the ftp_use_port() function. This might help us
diagnose the problems on AIX. Also make sure getaddrinfo() uses NULL and
not "0" for the service argument.
when SIZE is used on the file while being in BINARY mode. To work
around that (stupid) behavior, we attempt to parse the RETR response
even if the SIZE returned size zero.
Debugging help from Salvatore Sorrentino on February 26, 2003.
complete is now only made for 60 seconds and if no data was received during
those 60 seconds, we store a special error message (preparing to make this
a special error code) as this most likely means that the control connection
has died while we were transferring data.
