When doing PWD, there's a 257 response which apparently some servers
prefix with a comment before the path instead of after it as is
otherwise the norm.
Failing to parse this, several otherwise legitimate use cases break.
Bug: http://curl.haxx.se/mail/lib-2013-04/0113.html
When doing PORT and upload (STOR), this function needs to extract the
file descriptor for both connections so that it will respond immediately
when the server eventually connects back.
This flaw caused active connections to become unnecessary slow but they
would still often work due to the normal polling on a timeout. The bug
also would not occur if the server connected back very fast, like when
testing on local networks.
Bug: http://curl.haxx.se/bug/view.cgi?id=1183
Reported by: Daniel Theron
I am using curl_easy_setopt(CURLOPT_INTERFACE, "if!something") to force
transfers to use a particular interface but the transfer fails with
CURLE_INTERFACE_FAILED, "Failed binding local connection end" if the
interface I specify has no IPv6 address. The cause is as follows:
The remote hostname resolves successfully and has an IPv6 address and an
IPv4 address.
cURL attempts to connect to the IPv6 address first.
bindlocal (in lib/connect.c) fails because Curl_if2ip cannot find an
IPv6 address on the interface.
This is a fatal error in singleipconnect()
This change will make cURL try the next IP address in the list.
Also included are two changes related to IPv6 address scope:
- Filter the choice of address in Curl_if2ip to only consider addresses
with the same scope ID as the connection address (mismatched scope for
local and remote address does not result in a working connection).
- bindlocal was ignoring the scope ID of addresses returned by
Curl_if2ip . Now it uses them.
Bug: http://curl.haxx.se/bug/view.cgi?id=1189
The last remaining code piece that still used FTPSENDF now uses PPSENDF.
In the problematic case, a PREQUOTE series was done on a re-used
connection when Curl_pp_init() hadn't been called so it had messed up
pointers. The init call is done properly from Curl_pp_sendf() so this
change fixes this particular crash.
Bug: http://curl.haxx.se/mail/lib-2013-03/0319.html
Reported by: Sam Deane
The list of unsafe functions currently consists of sprintf, vsprintf,
strcat, strncat and gets.
Subsequently, some existing code needed updating to avoid warnings on
this.
... since they're not used by the easy interface really, I wanted to
remove the association. Also, I unified the pingpong statemachine driver
into a single function with a 'wait' argument: Curl_pp_statemach.
Reworked the pp->endofresp() function so that the conndata, line and
line length are passed down to it just as with Curl_client_write()
rather than each implementation of the function having to query
these values.
Additionally changed the int return type to bool as this is more
representative of the function's usage.
Remove internal separated behavior of the easy vs multi intercace.
curl_easy_perform() is now using the multi interface itself.
Several minor multi interface quirks and bugs have been fixed in the
process.
Much help with debugging this has been provided by: Yang Tse
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
As pointed out in Bug report #3579064, curl_multi_perform() would
wrongly use a blocking mechanism internally for some commands which
could lead to for example a very long block if the LIST response never
showed.
The solution was to make sure to properly continue to use the multi
interface non-blocking state machine.
The new test 1501 verifies the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3579064
Reported by: Guido Berhoerster
Commit b91d29a28e170c16d65d956db79f2cd3a82372d2 introduces a bug and breaks Curl_closesocket function. sock_accepted flag for the second socket should be tagged as TRUE before the sockopt callback is called because in case the callback returns an error, Curl_closesocket function is going to call the - fclosesocket - callback for the accept()ed socket
For active FTP connections, applications may need setting the sockopt after accept() call returns successful. This fix gives a call to the callback registered with CURL_SOCKOPTFUNCTION option. Also a new sock type - CURLSOCKTYPE_ACCEPT - is added. This type is to be passed to application callbacks with - purpose - parameter. Applications may use this parameter to distinguish between socket types.
Fixed warning: dereferencing pointer does break strict-aliasing rules
by using a union instead of separate pointer variables.
Internal union sockaddr_u could probably be moved to generic header.
Thanks to Paul Howarth for the hint about using unions for this.
Important for winbuild: Separate declaration of sockaddr_u pointer.
The pointer variable *sock cannot be declared and initialized right
after the union declaration. Therefore it has to be a separate statement.
Curl_protocol_connect() now does the tunneling through the HTTP proxy if
requested instead of letting each protocol specific connection function
do it.
ftp_do_more() returns after accepting the server connect however it
needs to fall through and set "*complete" to TRUE before exit from the
function.
Bug: http://curl.haxx.se/mail/lib-2011-12/0250.html
Reported by: Gokhan Sengun
First off the timeout for accepting a server connect back must of course
respect a global timeout. Then the timeleft function is only used by ftp
code so it was moved to ftp.c and made static.
"wait_data_conn" was added to the connectionbits in commit c834213ad5 for
handling active FTP connections but as it is purely FTP specific and now
only ever accessed by ftp.c I moved it into the FTP connection struct.
Backpedaled out the funny double-change of state in the multi state
machine by adding a new argument to the do_more() function to signal
completion. This way it can remain in the DO_MORE state properly until
done. Long term, the entire DO_MORE logic should be moved into the FTP
code and be hidden from the multi code as the logic is only used for
FTP.
1- Two new error codes are introduced.
CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of
FTP server connected.
CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts.
Neither of these errors are considered fatal and control connection
remains OK because it could just be a firewall blocking server to
connect to the client.
2- One new setopt option was introduced.
CURLOPT_ACCEPTTIMEOUT_MS
It sets the maximum amount of time FTP client is going to wait for a
server to connect. Internal default accept timeout is 60 seconds.
Keep track of which sockets that are the result of accept() calls and
refuse to call the closesocket callback for those sockets. Test case 596
now verifies that the open socket callback is called the same number of
times as the closed socket callback for active FTP connections.
Bug: http://curl.haxx.se/mail/lib-2011-12/0018.html
Reported by: Gokhan Sengun
When the new socket is created for an active connection, it is now done
using the open socket callback.
Test case 596 was modified to run fine, although it hides the fact that
the close callback is still called too many times, as it also gets
called for closing sockets that were created with accept().
By setting PROTOPT_NOURLQUERY in the protocol handler struct, the
protocol will get the "query part" of the URL cut off before the data is
handled by the protocol-specific code. This makes libcurl adhere to
RFC3986 section 2.2.
Test 1220 is added to verify a file:// URL with query-part.
When the user requests PORT with a specific port or port range, the code
could lock up in an endless loop. There's now an extra conditional that
makes sure to special treat the error and try the local address only
once so a second failure will abort the loop correctly.
Bug: http://curl.haxx.se/bug/view.cgi?id=3433968
Reported by: Gokhan Sengun
Now called 'use_ssl' instead, which better matches the current CURLOPT
name and since the option is used for all pingpong protocols (at least)
it makes sense to not use 'ftp' in the name.
After a PORT has been issued, and the multi handle would switch to the
CURLM_STATE_DO_MORE state (which is unique for FTP), libcurl would
return the wrong fdset to wait for when curl_multi_fdset() is
called. The code would blindly assume that it was waiting for a connect
of the second connection, while that isn't true immediately after the
PORT command.
Also, the function multi.c:domore_getsock() was highly FTP-centric and
therefore ugly to keep in protocol-agnostic code. I solved this problem
by introducing a new function pointer in the Curl_handler struct called
domore_getsock() which is only called during the DOMORE state for
protocols that set that pointer.
The new ftp.c:ftp_domore_getsock() function now returns fdset info about
the control connection's command/response handling while such a state is
in use, and goes over to waiting for a writable second connection first
once the commands are done.
The original problem could be seen by running test 525 and checking the
time stamps in the FTP server log. I can verify that this fix at least
fixes this problem.
Bug: http://curl.haxx.se/mail/lib-2011-10/0250.html
Reported by: Gokhan Sengun
When using the multi interface, a SOCKS proxy, and a connection that
wouldn't immediately consider itself connected (which my Linux tests do
by default), libcurl would be tricked into doing _two_ connects to the
SOCKS proxy when it setup the data connection and then of course the
second attempt would fail miserably and cause error.
This problem is a regression that was introduced by commit
4a42e5cdaa that was introduced in the 7.21.7 release.
Bug: http://curl.haxx.se/mail/lib-2011-08/0199.html
Reported by: Fabian Keil
Introduced the initial setup to allow closesocket callbacks by making
sure sclose() is only ever called from one place in the libcurl source
and still run all test cases fine.
The protocol handler's flags field now can set that the protocol
requires a password, so that the set_userpass function doesn't have to
have the specific knowledge of which protocols that do.
asyn-ares.c and asyn-thread.c are two separate backends that implement
the same (internal) async resolver API for libcurl to use. Backend is
specified at build time.
The internal resolver API is defined in asyn.h for asynch resolvers.
Stop the abuse of CURLE_FAILED_INIT as return code for things not being
init related by introducing two new return codes:
CURLE_NOT_BUILT_IN and CURLE_UNKNOWN_OPTION
CURLE_NOT_BUILT_IN replaces return code 4 that has been obsoleted for
several years. It is used for returning error when something is
attempted to be used but the feature/option was not enabled or
explictitly disabled at build-time. Getting this error mostly means that
libcurl needs to be rebuilt.
CURLE_FAILED_INIT is now saved and used strictly for init
failures. Getting this problem means something went seriously wrong,
like a resource shortage or similar.
CURLE_UNKNOWN_OPTION is the option formerly known as
CURLE_UNKNOWN_TELNET_OPTION (and the old name is still present,
separately defined to be removed in a very distant future). This error
code is meant to be used to return when an option is given to libcurl
that isn't known. This problem would mostly indicate a problem in the
program that uses libcurl.
In my attempts to reduce #ifdefs in code, the SOCKS functions are now
macros when libcurl is built without proxy support and therefore the FTP
code could avoid some #ifs.
The new http_proxy.* files now host HTTP proxy specific code (500+ lines
moved out from http.c), and as a consequence there is a macro introduced
for the Curl_proxyCONNECT() function so that code can use it without
actually supporting proxy (or HTTP) in builds.
The PROT_* set of internal defines for the protocols is no longer
used. We now use the same bits internally as we have defined in the
public header using the CURLPROTO_ prefix. This is for simplicity and
because the PROT_* prefix was already used duplicated internally for a
set of KRB4 values.
The PROTOPT_* defines were moved up to just below the struct definition
within which they are used.
The protocol handler struct got a 'flags' field for special information
and characteristics of the given protocol.
This now enables us to move away central protocol information such as
CLOSEACTION and DUALCHANNEL from single defines in a central place, out
to each protocol's definition. It also made us stop abusing the protocol
field for other info than the protocol, and we could start cleaning up
other protocol-specific things by adding flags bits to set in the
handler struct.
The "protocol" field connectdata struct was removed as well and the code
now refers directly to the conn->handler->protocol field instead. To
make things work properly, the code now always store a conn->given
pointer that points out the original handler struct so that the code can
learn details from the original protocol even if conn->handler is
modified along the way - for example when switching to go over a HTTP
proxy.
Instead of polluting many places with #ifdefs, we create a single place
for this function, and also check return code properly so that a NULL
pointer returned won't cause problems.
It helps to prevent a hangup with some FTP servers in case idle session
timeout has exceeded. But it may be useful also for other protocols
that send any quit message on disconnect. Currently used by FTP, POP3,
IMAP and SMTP.
While changing Curl_sec_read_msg to accept an enum protection_level
instead of an int, I went ahead and fixed the usage of the associated
fields.
Some code was assuming that prot_clear == 0. Fixed those to use the
proper value. Added assertions prior to any code that would set the
protection level.
Some FTP servers (e.g. Pure-ftpd) end up hanging if we close the data
connection before transferring all the requested data. If we send ABOR
in that case, it prevents the server from hanging.
Bug: https://bugzilla.redhat.com/643656
Reported by: Pasi Karkkainen, Patrick Monnerat
This fixes a memory leak related to the GSS-API code.
Added a krb5_init and krb5_end functions. Also removed a work-around
the lack of proper initialization of the GSS-API context.
Curl_sec_login was returning the opposite result that the code in ftp.c
was expecting. Simplified the return code (using a CURLcode) so to see
more clearly what is going on.
Test 563 is enabled now and verifies that the combo FTP type=A URL,
CURLOPT_PORT set and proxy work fine. As a bonus I managed to remove the
somewhat odd FTP check in parse_remote_port() and instead converted it
to a better and more generic 'slash_removed' struct field. Checking the
->protocol field isn't right since when an FTP:// URL is sent over a
HTTP proxy, the protocol is HTTP but the URL was handled by the FTP code
and thus slash_removed is set TRUE for this case.
The FTP implementation was missing a timestamp reset point, making the
waiting for responses after sending a post-transfer "QUOTE" command not
working as supposedly. This bug was introduced in 7.20.0
Prefixing the FTP quote commands with an asterisk really only
worked for the postquote actions. This is now fixed and test case
227 has been extended to verify.
the global timeout if set. Also, as was reported in the bug report #2956437
by Ryan Chan, the time stamp to use as basis for the per command timeout was
not set properly in the DONE phase for FTP (and not for SMTP) so I fixed
that just now. This was a regression compared to 7.19.7 due to the
conversion of FTP code over to the generic pingpong concepts.
http://curl.haxx.se/bug/view.cgi?id=2956437
again when downloading files over FTP using ASCII and it turns out that the
final size of the file is not the same as the initial size the server
reported. This is very common since servers don't take the newline
conversions into account.
command is a special "hack" used by the drftpd server, but even though it is
a custom extension I've deemed it fine to add to libcurl since this server
seems to survive and people keep using it and want libcurl to support
it. The new libcurl option is named CURLOPT_FTP_USE_PRET, and it is also
usable from the curl tool with --ftp-pret. Using this option on a server
that doesn't support this command will make libcurl fail.
meter/callback during FTP command/response sequences. It turned out it was
really lame before and now the progress meter SHOULD get called at least
once per second.
used during the FTP connection phase (after the actual TCP connect), while
it of course should be. I also made the speed check get called correctly so
that really slow servers will trigger that properly too.
QUOTE commands and the request used the same path as the connection had
already changed to, it would decide that no commands would be necessary for
the "DO" action and that was not handled properly but libcurl would instead
hang.
CURLOPT_PREQUOTE) now accept a preceeding asterisk before the command to
send when using FTP, as a sign that libcurl shall simply ignore the response
from the server instead of treating it as an error. Not treating a 400+ FTP
response code as an error means that failed commands will not abort the
chain of commands, nor will they cause the connection to get disconnected.
to use the "standard" ENABLE_IPV6 one. Also, if port number cannot be figured
out to connect to after a name resolve (due to it not being IPv4 or IPv6),
that particular address will now simply be skipped.
With the curl memory tracking feature decoupled from the debug build feature,
CURLDEBUG and DEBUGBUILD preprocessor symbol definitions are used as follows:
CURLDEBUG used for curl debug memory tracking specific code (--enable-curldebug)
DEBUGBUILD used for debug enabled specific code (--enable-debug)
Chen pointed out how curl couldn't upload with resume when reading from a
pipe.
This ended up with the introduction of a new return code for the
CURLOPT_SEEKFUNCTION callback that basically says that the seek failed but
that libcurl may try to resolve the situation anyway. In our case this means
libcurl will attempt to instead read that much data from the stream instead
of seeking and that way curl can now upload with resume when data is read
from a stream!
